Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹30.3 LAccepted-AOC | 1 | Accepted-AOC LOWEST | |
| 2 | 2₹34.5 L+₹4.3 L (14.1%)Rejected-Finance | 2 | Rejected-Finance NOT LOWEST | |
| 3 | 3₹35.4 L+₹5.2 L (17.0%)Rejected-Finance | 3 | Rejected-Finance NOT LOWEST | |
| 4 | 4₹35.8 L+₹5.5 L (18.2%)Rejected-Finance | 4 | Rejected-Finance NOT LOWEST | |
| 5 | 5₹38.0 L+₹7.8 L (25.7%)Rejected-Finance | 5 | Rejected-Finance NOT LOWEST |
Tender Value
₹50 L
EMD Value
₹1 L
Closing Date
17 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) PALAM DELHI CANTT
GE (AF) PALAM DELHI CANTT-10
REPAIR TO CERTAIN BR WORKS PERTAINING TO MAINT PGME OF OTM AND MD ACCN OF CAMP AREA, PINTO PARK, MES COLONY, AFSR, AFSC AND CWE COMPLEX UNDER GE (AF) PALAM DELHI CANTT-10
2023_MES_590247_1
GENP-11/2023-24
Open Tender
Civil Works
Item Rate
270 days
GE (AF) PALAM DELHI CANTT
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE (AF) PALAM
₹1 L
Yes
18 Aug 2023
19 Apr 2023
18 May 2023
19 Apr 2023
17 May 2023
4 May 2023
Amount
Demolition of brick work/ stone masonry built in cement or cement lime mortar including all quoins, arches, pillars etc of any description including removing the debris from site to outside MoD land.
M&L for cutting holes in brick walls built in cement mortar or cement lime mortar exc one brick but n.exc two bricks wall thick for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required complete.
All as per item No 2 above but n exc half brick wall.
Taking down cement or cement lime plaster on brick/ stone or concrete surfaces etc including raking out joints, hacking for key, scrubbing down with water etc upto 4th storey building including removing the debris from site to outside MoD land.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the debris from site to outside MoD land.
Demolition of cement concrete (reinforced) as in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work including removing the debris from site to outside MoD land.
Demolition of stone slab and tiles of any description or thickness in foor, aprons etc laid, bedded and pointed in any cement mortar including removing the debris from site to outside MoD land.
Demolition of concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) including removing the debris from site to outside MoD lan
Taking up or down 15mm bore steel tubing and connections in walls, ceilings, floors, etc including cleaning for re-fixing complete all as specified.
Taking up or down 20mm bore steel tubing and connections in walls, ceilings, floors, etc including cleaning for re-fixing complete all as specified
Dismantling water tanks exc 250 & n exc 500 litres capacity complete.
M&L for disconnecting existing tanks exceeding 250 ltrs but not exceeding 500 ltr, setting aside, cleaning and hoisting, reconnecting and re-fixing in position complete all as specified and as directed by Engr-in-Charge. (Note :The rate of necessary GI nipple of any size, long threaded barrel nipple etc shall be inclussive in the quoted rate of this item).
M&L for brick work with sub class `B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified.
S&F mild steel work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165.
M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces of walls in cement mortar 1:6 to be finished even and smooth without using extra cement .
M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces of walls in cement mortar 1:4 to be finished even and fair with liquid water proofing compound by weight as per manufacturer's instructions upto and including 4th storey bldg with necessary scaffolding . (Note : WPC will be measured and paid separately)
M&L for 10mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar 1:3 in ceilings to be finished even and smooth without using extra cement.
M&L for preparing plastered or unplastered new surfaces on walls including brooming down or steel wire brushing, scraping down and applying two coats of distemper oil emulsion over one coat of primer complete.
M&L for preparing plastered or unplastered new surfaces on walls including brooming down or steel wire brushing, scraping down and applying two coats of cement base paint of approved colour and tint complete.
M&L for preparing plastered or unplastered new surfaces on ceilings including brooming down or steel wire brushing, scraping down and applying three coats of white wash.
M&L for anti skid coloured ceramic tiles (first quality) 7 to 8mm thick (squre or rectangular) area of each tile exceeding 0.11sqm but n.exc. 0.18sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over & including 15mm thick screed bed in cement mortar 1:4.
All as per item No 21 above but in skirtings laid over 10mm thick cement plaster in CM 1:4.
M&L for non skid coloured ceramic tiles (first quality) 7 to 8mm thick (squre or rectangular) area of each tile not exc. 0.11sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over & including 15mm thick screed bed in cement mortar 1:4.
M&L for coloured glazed ceramic tiles as in vertical surfaces of size 300x200x7mm/ 450x300x7mm thick (first quality) set and jointed in cement slurry and pointed in white or coloured cement to match over & including 10mm thick rendering in cement mortar 1:4.
M&L for providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in roof padding to maintain the slope including finish even and fair without using extra cement but using liquid water proofing compound at manufacturers instructions. (Note :- WPC shall be measured and paid separately.)
M&L for providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in roof kerbs/ gola rounded or chamfered on edges complete.
Supply only Liquied water Proofing Compound all as specified.
S&F for 16 to 18mm thick green marble slabs (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window cill, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble laid over 15mm thick screed bed in CM 1:4 complete.
Making hole on kitchen platform to facilitate for insertion gas tubing/ pipe of appropriate size and shape.
M&L for 75 mm thick cement concrete 1:3:6, type C-1 (using 20 mm graded stone aggregate) as in plinth protections including finished even and smooth surface without using extra cement and making necessary joints duly filled with bitumen mastic including use of necessary form work.
S&F factory made chequered cement concrete tiles of size 25cm x 25cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with white cement and pigment laid over and including 20mm thick screed bed in cement mortar 1:6.
M&L for cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in copings, window cills, kerb stone for foot path and similar work with plain fair finishing including chamfers, weathering, throating etc.
M&L for GI tubing 15mm bore `medium grade` with all fittings and fixed complete to walls and ceilings or laid in floors etc complete.
M&L for GI tubing 20mm bore `medium grade` with all fittings and fixed complete to walls and ceilings or laid in floors etc complete.
S&F for 500 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), three layers, hoisted and fixed in position complete all as specified.
S&F ball brass valves 20 mm bore high pressure with polythene float and fly nut complete.
Taking down cast iron/ AC/ PVC pipes of 100/110mm bore of any description complete all as specified.
All as per item No 37 above but 75/80 mm bore pipe.
S&F for 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including suitable clamps at one meter of interval complete.
All as per item No 39 above but 75 mm bore pipe.
S&F for 100mm bore cast iron soil, waste and vent pipes (spun pipe) in any length with or without ears fixed to walls with cement joints including suitable clamps after every one mtr of interval complete.
S&F for 75mm bore cast iron soil, waste and vent pipes (spun pipe) in any length with or without ears fixed to walls with cement joints including suitable clamps after every one mtr of interval complete.
S&F in repair PVC (SWR) bends of radius suitable for 110mm bore pipes all as specified.
S&F in repair PVC (SWR) bends of radius suitable for 75mm bore pipes all as specified.
S&F in repair 100mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured).
S&F in repair 100mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) with oval access door.
S&F in repair 100mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door.
S&F in repair 75mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval access door.
S&F in repair 75mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured).
S&F in repair 75mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) with oval access door.
M&L in repair cast iron Nahani trap/floor trap with CP grating including jointing with cement joint to waste pipe of 75mm bore fixed in cement concrete type B-1(1:2:4) complete all as specified.
S&F in replacement of mild steel brackets (2 Nos) of size 35mmx35mmx5mm angle iron duly painted with two coats of synthetic enamel paint over one coat of red oxide of required length for placing the WHB/Sink etc including taking down and refixing of existing WHB/Sink etc and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required complete.
S&F in replacement of sink with drainage board made of stainless steel 1mm thick kitchen or laboratroy with plugs, washers and waste, including sink coupling and bedding in cement mortar on to dwarf wall or including fixing cantilever barckets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete.
S&F in repair 32 mm dia PVC waste pipe suitable for waste coupling 32mm/40mm mm dia and 600mm long.
S&F in repair stainless steel plate rack of overall size 600mmx900mm and weight not less than 6 Kgs as approved by Engr-in-Charge.
M&L for preparing old treated plastered or unplastered surfaces of walls including brooming down by steel wire brushing, scraping down smoke, soots etc and applying one coat of white wash complete.
All as per item No 56 above but on ceiling.
M&L for preparing old treated plastered or unplastered surfaces of walls including brooming down by steel wire brushing, scraping down smoke, soots etc and applying one coat of oil emulsion distemper white or tinted complete.
M&L for complete removal of existing treatment including preparing surfaces of walls and applying two coats of distemper oil emulsion white or tinted over a coat of primer complete all as specified and directed.
M&L for applying 2mm (average) thickness wall care putty over old/new plastered surfaces of walls for preparatory to distempering getting even and smooth surface all as specified and directed.
M&L for preparation of old painted surfaces of wood and wood based material of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.
M&L for preparation of old painted surfaces of steel and iron surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.
M&L for preparation of old decorated external wall/ceiling surface of existing treatment by scrapping with Trucare Wall Sander : L-01/H-01 (having mechanical vaccum mechanism) having RPM not less than 1500, sand pad of 80 grit having dia of 7"/9" to make the surface free from dust, loose paint etc or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applying two coats of wheather proofing exterior acrylic emulsion paint over priming coat premium quality including applying 1mm thick wall care putty over surface including sand papering to make surface smooth complete for G+3 storied buildings complete.
All as per item No 63 above but without wall care putty.
M&L preparation of old decorated external wall/ceiling surface by mechanised sander of berger paints or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applying two coats of cement base paint over and including 1mm thick wall care putty including sand papering to making surface even and smooth complete all as specified and directed.
Taking down chowkhat or frame with shutters (without taking off shutter from the frame) area not exc 1.5 sqm each.
S&F for factory made PVC door frame of size 50mmx47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification and drawing.
S&F for factory made Solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC shets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC shet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at site as per specification and drawing.
S&F for butt hinge, stainless steel, ISI Marked 100mm size.
S&F for aluminium anodized barrel tower bolts of extruded section of size 200mm long complete.
S&F for extruded aluminium alloy handles, fabricated type, anodised, 125 mm size complete.
Hacking out old broken glass (any thickness size and quality and description) from wooden/steel frames glazed with putty or fixed with beads etc complete all as specified and directed.
S&F for 4 mm thick sheet glass ordinary quality fixed with oil putty or with wooden beading in square or fixed to steel window etc area not exc 0.50 sqm each pane.
S&F for 4 mm thick sheet glass ordinary quality fixed with oil putty or with wooden beading in square or fixed to steel window etc area exc 0.50 sqm each pane
S&F in repair for stainless steel wire cloth 0.36 mm nominal dia of eire and avedrage width of apertupre 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified. Note for item No 1 to 75 :- (a) 75% quantity of paint ( Emulsion/Plastic/Synthetic paint/OBD/Cement paint) shall be submitted to Engr-In-Charge by contractor within 15 days from the date of commencement of work. (b) The work must be executed through authorised Applicator of manufacturer and approved by GE before commencement of work. (c) The site shall be handed over in piece meal (minimum 03 buildings/ Qtrs at a time). After completion of said buildings/ Qtrs, another buildings/ Qtrs shall be handed over to contractor for execution of work. The said buildings/ Qtrs (minimum 03 buildings/ Qtrs) shall be completed within 15 days by deploying sufficient trademen failing which a penal recovery of Rs 2000/- per building/ Qtr per week shall be recovered from the contractor's dues. (d) After periodical services of buildings/ Qtrs, entire cleaning including paint marks etc from window/ door/ glass panes shall be removed by the contractor in all respect. The quoted rate shall deemed to be included the above provision and nothing extra shall be paid on this account).
Mahesh Enterprises
M/S Parshant Associates
M/S Davinder Kumar
JAIPAL AND BROTHERS
M/S VERMA BUILDER
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .