Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.5 LAccepted-AOC | L1 | Accepted-AOC Award of Contract | |
| 2 | L2₹36.7 L+₹1.5 L (4.11%)Rejected-Finance | L2 | Rejected-Finance Not Being Lowest | |
| 3 | L3₹37.7 L+₹2.4 L (6.81%)Rejected-Finance | L3 | Rejected-Finance Not Being Lowest | |
| 4 | L4₹37.7 L+₹2.5 L (6.95%)Rejected-Finance | L4 | Rejected-Finance Not Being Lowest | |
| 5 | L5₹37.8 L+₹2.5 L (7.22%)Rejected-Finance | L5 | Rejected-Finance Not Being Lowest |
| Sl No | Description | Qty | Unit | M/s AG PATHAN L5 | OM SAI ASSOCIATES L9 | S.k ENTERPRISES L3 | M/S.SHOURYA ENGINEERS AND CONTRACTORS L1 | M/S. AMERHAMZA GULAB SHAIKH L8 | M/S-B.R.SONAWANE L6 | Shri Sai Construction Prop Purushottam Arun Chhallare L7 | MATOSHREE CONSTRUCTION L4 | Arihant Construction L2 | MS. G.A. CONSTRUCTION L10 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Demolition of cement concrete (un-reinforced) in ground floor & paving n.exc. 15cm thick below or above ground level. | 31.18 | Cum | 120 ₹3,741.6 | 66 ₹2,057.88 Lowest | 150 ₹4,677 | 70 ₹2,182.6 | 120 ₹3,741.6 | 100 ₹3,118 | 100 ₹3,118 | 300 ₹9,354 | 100 ₹3,118 | 150 ₹4,677 |
| 2.00 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons laid, bedded and pointed in any mortar etc. | 54.6 | X Sqm | 120 ₹6,552 | 160 ₹8,736 | 180 ₹9,828 | 40 ₹2,184 Lowest | 200 ₹10,920 | 100 ₹5,460 | 100 ₹5,460 | 400 ₹21,840 | 100 ₹5,460 | 150 ₹8,190 |
| 3.00 | M&L for providing 75mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base complete all as directed. | 389 | Sqm | 220 ₹85,580 | 280 ₹1,08,920 | 230 ₹89,470 | 150 ₹58,350 Lowest | 260 ₹1,01,140 | 180 ₹70,020 | 200 ₹77,800 | 260 ₹1,01,140 | 200 ₹77,800 | 215 ₹83,635 |
| 4.00 | M&L for non - skid ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors. laid over and including screed bed 15 mm thick in cement and sand mortar (1:6 ) set and jointed in neat cement slurry and pointed in white or coloured cement to match,etc complete all as specified and as directed | 230 | Sqm | 1,000 ₹2,30,000 | 1,100 ₹2,53,000 | 950 ₹2,18,500 | 800 ₹1,84,000 Lowest | 1,020 ₹2,34,600 | 850 ₹1,95,500 | 1,000 ₹2,30,000 | 850 ₹1,95,500 | 990 ₹2,27,700 | 950 ₹2,18,500 |
| 5.00 | M&L for coloured glazed ceramic tiles digitally printed 300x450mm, 7-8 mm thick as approved by GE as in dado / skirting or on vertical surfaces, over and including 10 mm thick backing coat in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile etc complete all as specified and directed. | 45 | Sqm | 1,150 ₹51,750 | 1,150 ₹51,750 | 1,030 ₹46,350 | 1,050 ₹47,250 | 1,020 ₹45,900 | 750 ₹33,750 Lowest | 1,000 ₹45,000 | 850 ₹38,250 | 1,100 ₹49,500 | 950 ₹42,750 |
| 6.00 | .-ditto- all as per ser item No 05 but as in dado/ skirting on vertical surfaces over and including 10 mm thick backing coat in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile etc complete all as specified and directed. | 5 | Sqm | 1,050 ₹5,250 | 1,200 ₹6,000 | 950 ₹4,750 | 1,100 ₹5,500 | 1,100 ₹5,500 | 700 ₹3,500 Lowest | 1,000 ₹5,000 | 900 ₹4,500 | 1,000 ₹5,000 | 980 ₹4,900 |
| 7.00 | M&L for 18-20mm thick machine cut kota stone slab in flooring,steps over 20 mm thick screed base in cement and sand (1:6) mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and directed by Engineer-in-Charge | 44 | Sqm | 1,100 ₹48,400 | 1,280 ₹56,320 | 1,000 ₹44,000 | 1,100 ₹48,400 | 1,100 ₹48,400 | 800 ₹35,200 | 1,200 ₹52,800 | 1,000 ₹44,000 | 773 ₹34,012 Lowest | 1,280 ₹56,320 |
| 8.00 | M&L for Kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar including 15 mm thick backing coat in cement and sand mortar (1:4) etc complete all as specified and directed by Engineer-in-Charge | 5 | Sqm | 1,150 ₹5,750 | 1,400 ₹7,000 | 1,200 ₹6,000 | 1,150 ₹5,750 | 1,120 ₹5,600 | 850 ₹4,250 Lowest | 1,200 ₹6,000 | 1,000 ₹5,000 | 1,873 ₹9,365 | 1,350 ₹6,750 |
| 9.00 | M&L for 15mm thick Granite (of any type) tiles machine cut, single piece jambs and double piece cills overall lenght of window riser of steps, skirting, dado and pillar laid over cement mortar backing coat jointed with grey cement slurry mixed with pigment to match the shade of the slab including pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, moulding complete and including rendering/ backing coat coat of 15 mm thick in CM 1:3 etc complete all as specified and as directed. | 21 | Sqm | 3,000 ₹63,000 | 2,550 ₹53,550 | 3,200 ₹67,200 | 2,000 ₹42,000 Lowest | 4,000 ₹84,000 | 3,200 ₹67,200 | 3,500 ₹73,500 | 2,500 ₹52,500 | 2,900 ₹60,900 | 4,200 ₹88,200 |
| 10.00 | M&L for 16-18mm thick rough dressed Shahabad stone as in floor/ plinth etc over and incl 15mm thick screed bed in CM 1:6 complete all as specified and directed | 170 | Sqm | 450 ₹76,500 | 420 ₹71,400 | 360 ₹61,200 | 420 ₹71,400 | 690 ₹1,17,300 | 300 ₹51,000 Lowest | 300 ₹51,000 Lowest | 500 ₹85,000 | 400 ₹68,000 | 425 ₹72,250 |
Tender Value
₹47.5 L
EMD Value
₹95,000
Closing Date
26 Feb 2026, 6:00 pmClosed
Garrison Engineer (North) Ahilyanagar
Military Engineer Services Garrison Engineer (North) Nagar Pathardi Road Ahilyanagar Fort Ahilyanagar 414 002
SPECIAL REPAIRS TO BLDG NO T-19, T-23 AND T-26 AT BTR AND BLDG NO T-02, T-11 AND T-17 OF OLD ARMY SCHOOL UNDER GE(N) AHILYANAGAR
2026_MES_751541_1
8182/E8
Open Tender
Civil Works
Item Rate
180 days
Garrison Engineer (North) Ahilyanagar
As per NIT
8 documents required · 8 mandatory
₹500
Garrison Engineer (North) Ahilyanagar
₹95,000
Yes
7 Apr 2026
6 Feb 2026
28 Feb 2026
6 Feb 2026
26 Feb 2026
19 Feb 2026
Demolition of cement concrete (un-reinforced) in ground floor & paving n.exc. 15cm thick below or above ground level.
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons laid, bedded and pointed in any mortar etc.
M&L for providing 75mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base complete all as directed.
M&L for non - skid ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors. laid over and including screed bed 15 mm thick in cement and sand mortar (1:6 ) set and jointed in neat cement slurry and pointed in white or coloured cement to match,etc complete all as specified and as directed
M&L for coloured glazed ceramic tiles digitally printed 300x450mm, 7-8 mm thick as approved by GE as in dado / skirting or on vertical surfaces, over and including 10 mm thick backing coat in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile etc complete all as specified and directed.
.-ditto- all as per ser item No 05 but as in dado/ skirting on vertical surfaces over and including 10 mm thick backing coat in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile etc complete all as specified and directed.
M&L for 18-20mm thick machine cut kota stone slab in flooring,steps over 20 mm thick screed base in cement and sand (1:6) mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and directed by Engineer-in-Charge
M&L for Kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar including 15 mm thick backing coat in cement and sand mortar (1:4) etc complete all as specified and directed by Engineer-in-Charge
M&L for 15mm thick Granite (of any type) tiles machine cut, single piece jambs and double piece cills overall lenght of window riser of steps, skirting, dado and pillar laid over cement mortar backing coat jointed with grey cement slurry mixed with pigment to match the shade of the slab including pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, moulding complete and including rendering/ backing coat coat of 15 mm thick in CM 1:3 etc complete all as specified and as directed.
M&L for 16-18mm thick rough dressed Shahabad stone as in floor/ plinth etc over and incl 15mm thick screed bed in CM 1:6 complete all as specified and directed
Fixing only 16-18mm thick rough dressed Shahabad stone as in floor/plinth etc over and incl 15mm thick screed bed in CM 1:6 including dismantling complete all as specified and directed
Demolition of brickwork or stone bouilder masonary built in cement mortar or lime mortar complete all as specified
M&L for brickwork with fly ash bricks straight or curved on plan exc 6m mean radius, built in CM 1: 6 complete all as specified
M&L for brickwork with fly ash bricks straight or curved on plan exc 6m mean radius, built in CM 1: 6 complete all as specified
Taking down cement mortar plaster on brick or stone walls, raking out joints, hacking for key complete all as directed
M&L for dubbing out average 10mm thick in CM 1:6 on irregular face of walls (when specifically ordered in writing)
M&L for rendering, 15 mm thick on brick/Stone Masonry/ concrete surfaces in cement mortar 1:6 surfaces finished even and smooth without using extra cement including sagol finished complete all as specified.
M&L for rendering, 15 mm thick on stone/brick / concrete surfaces in cement mortar 1:4 finished even and fair without using extra cement complete all as specified and directed.
M&L for rendering 5mm thick on concrete surface of ceiling in CM 1:3 finished even and fair without using extra cement complete all as specified and directed.
M & L for preparation of newly plastered surface of wall and apply two coats of OBD over a coat of primer any height including scaffholding etc complete all as directed.
M & L for preparation of new plastered surfaces of wall and applying two coats for cement based paint overv a coat of alkali resistant priming paint any height including scaffholding etc complete all as directed.
M & L for preparation of old plastered surface of wall and applying one coats of cement base paint any height including scaffholding etc complete all as directed.
M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new/old surfaces.
M & L for preparation of newly plastered surface of ceiling and apply three coats of white wash any height including scaffholding etc complete all as directed.
M & L for preparation of old plastered surfaces of walls and apply two coat of OBD, finished with roller finish on plastered surfaces of wall any height including scaffholding etc complete all as specified and directed.
M&L for 2 mm thick wall care putty etc complete all as specified and directed.
Taking down chowkhats or frames not exc.1.5 Sqm each with shutters (without taking off shutters from the frames) etc complete all as specified and directed by Engineer-in-Charge.
Taking down chowkhats or frames exc. 1.5 sq. m and n exc 4.00 Sqm each with shutters (without taking off shutters from the frames) etc complete all as specified and directed by Engineer-in-Charge
Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each etc complete all as specified and directed by Engineer-in-Charge
S & F Pressed steel door frame of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hings, lock strike plate, etc, complete all as specified,
S & F pressed steel door frame of size 100 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified,
S&F 35 mm thick IInd C/L H/W glazed & skeleton shutters open rebated and prepared to receive glass gauge, divided into square or rectangles with plain chamfered or rounded mitered & rebated slash bars including beads mitered for securing glass wire gauge etc all as specified
M&L for 35 mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated
S&F for Fe-290 (Gde E- 165)Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete.
M&L for 1mm thick mild steel sheet earths; covering to door shutters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc.with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required
S&F Powder coated aluminium anodised aluminium frame, shutters for door,windows, ventilators with one or more rebates including joining cleat for fixing etc, rubber / neoprene beading and locking arrangement etc complete all as specified and directed by Engr-in-Charge
S&F anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified
S&F butt hinges medium weight cold rolled mils steel 100mm long.
S&F Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed 150mm long.
S&F Mild steel pressed handles, oval type, stove enamelled black 150mm long.
S&F 300mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed
S & F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40 mm and fixed in any position any type of opening with and including wooden beads complete all as directed by Engr-in-Charge.
S&F 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring.
Hacking out old broken glass ( any thickness size ,quality or description ) from wooden/Steel frames glazed with putty or fixed with beads.
M & L for 3 mm thick sheet frosted/pin headed glass ordinary quality and glazing with oil putty or wooden beads in squares n.exc 0.50 sqm in each pane.
M & L for 4 mm thick plain sheet frosted/pin headed glass ordinary quality and glazing with oil putty or wooden beads, rubber bedding in squares n.exc 0.50 sqm in each pane.
M & L for preparation of new wooden surface and applying two coats of synthetic enamel paint over a coat of pink primer complete all as directed.
M & L for preparation of old wooden surface and applying one coat of synthetic enamel paint.
M & L for preparation of new steel surface and applying two coats of synthetic enamel paint over a coat of red oxide.
M & L for preparation of old steel surface and applying one coat of synthetic enamel paint.
S&F curtain rod 20mm dia, having corrugated PVC extrusion on eletric resistance welded MS pipe with fancy type 02 nos Knobs and 02 Nos brackets per each door/ windows etc complete all as specified and directed
Full moulding/half moulding of stone slabs one edge, two edge, as in steps cooking platforms jambs and cills and other similar situations complete all as specified & directed.
Dismantling of unframed work fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section
M&L for Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors ladders framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165
Dismantling of framed timber scantling 40 Sq, Cm and over in section, in any position
M&L for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet of any colour 0.50mm thick (total coated thickness), 550 Mpa minimum, yield strength. It shall be coated with hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon and finished with resin coat on both surfaces @ 150 gm/sqm of coating (total both surfaces) having overall width and laid width as specified and shall be fixed using hot dip galvanized, self drilling and self tapping screws neoprene and EPDM washers. Penetrations and laps in sheet shall be sealed by using proper sealant profile. HDPE fillers shall be provided wherever required to close voids between sheets, sheet & fasteners. including dismantling existing sheets etc complete all as directed
M&L for pre- painted galvalume aluminum zinc coating GI based plain steel sheet of any colour 0.50mm thick (total coated thickness), 550 Mpa minimum, yield strength. It shall be coated with hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon and finished with resin coat on both surfaces @ 150 gm/sqm of coating (total both surfaces) having overall width and laid width as specified and shall be fixed using hot dip galvanized, self drilling and self tapping screws neoprene and EPDM washers. Penetrations and laps in sheet shall be sealed by using proper sealant profile. HDPE fillers shall be provided wherever required to close voids between sheets, sheet & fasteners. including dismantling existing sheets etc complete all as directed
S&F in repairs for false ceiling with Vinyl faced Arm-Gyp-FB, ceiling 600 x 600 x 9mm thick with washable metalized polyester foil backing with Vinyl covered edges, supporting sections shall be of suitable size from same makes embossed on sections and level adjuster duly suspended by 2 mm dia GI wire fixed to roof at 600mm centre to centre as per manufacturer's instructions / specification and all as directed including taking down/ out existing.
S&F of steel work of grade ST 240 in Square/Rectangular tubes confirming to IS 4923-2017 or circular section confirming to IS 1161-2014 as in post, trusses, purlin, rafter, bracing etc including weldingand providing special shaped washer etc complete all as specified and directed by Engr-In-Charge
S&F of steel work in post, Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. as per Fe 410 -W (Gde- E- 250) quality- A
S&F structural rolled mild steel Fe 410-00 (Gde E-250) Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment
M&L Providing cement concrete Type C1 1:3:6 20mm graded aggregate) in kerbs or mud stops, rounded or chamfered on edges
Taking down carefully copper/aluminum point wiring (light/fan/bell/socket, power point etc) complete , including fixture and fitting such as switches, ceilling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition seperately) and making good disturbed surfases of walls, floors etc complete all as specified and directed Engineer-in-Charge
M&L for point wiring complete on surface of wall (open) type with two runs of 1.5 sq mm for phase and neutral single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS cable drawn in and incl PVC Casing and capping ISI Marked with its accessories PVC boxes (upto 12 module ) for fixing switches/socket/regulators etc incl 1.5 sq mm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS cable as earth continuity conductor to common earth & connecting to earth dolly for the following, all as specified and directed. Note : 1. Proper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2. All points are required to earthed upto fixtures i.e. Holders, Tube lights, Wall lights, ceiling lights, bulkhead lights, bldg security light etc
One light point controlled by switch 5/6 Amp single pole one way
One fan point controlled by switch 5/6 Amp single pole one way
One 3 pin 5 Amp socket outlet on same board controlled by one, one way 5 Amp switch
One socket outlet 5/3 pin 5 Amp controlled by one switch on independent board
.-ditto- all as per ser Item No 64 (here-in-before) but with 2.5 Sqmm Copper conductor cable for Phase , Neutral and Earth for one 3 pin, 15 Amp socket outlet on independent board
S&F Modular Switch, 6 Amp, one way, one Module. etc complete all as specified and directed by Engineer-in-Charge.
S&F Modular Switch, 16 Amp, one way, one Module. etc complete all as specified and directed by Engineer-in-Charge.
S&F Modular Socket Outlet 6 Amp, 3 pin, combined two module etc complete all as specified and directed by Engineer-in-Charge.
S&F Modular Socket Outlet 6 Amp / 16 Amp - 6 pin combined two module etc complete all as specified and directed by Engineer-in-Charge
S&F Modular Fan Regulator Fan step regulator, 120 Watt - two module etc complete all as specified and directed by Engineer-in-Charge
S&F ceiling rose 3 terminal / PVC / polycarbonate, isolated body etc complete all as specified and directed by Engineer-in-Charge
S&F Double door Sheet metal enclosures factory made DBs 4 way TPN, 415 volts Concealed in Wall, protection class IP-42, suitable for fixing of MCBs etc, confirming As per IEC 61439-3, Suitable for Flush Mounting and Surface Mounting, With 200 A Copper Busbar, With Neutral bar, Earthbar and Cable ties for Cable management, Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed. Note:- MCCBs/ MCBs DP/TPN will be measured and paid separately.
S&F Double door Sheet metal enclosures factory made DBs SPN, 8 way, 240 volts, protection class IP-42, suitable for fixing of MCBs, confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 200 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management,Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed. Note:- MCBs will be measured and paid separately.
Supply & fix MCB, TPN, AC, 415 Volts of 63 Amp capacity 10 KA, 'C' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge
Supply & fix MCB, SP, AC, 240 Volts of 06 to 40 Amp capacity 10 KA, 'C' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge
Supply & fix MCBs, SPN, AC, 240 volts of 40 Amps capacity 10 KA, 'C' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge
Supply and fix LED Tubelight fitting 20 W extruded aluminium housing battens are equipped with high specification CISPR 15 compliant Electronic driver and milky white , special polycarbonate diffuser , for glare free efficient light distribution with uniform light output, with all accessories including its connection with and including 2 core sheathed copper conductor cable of size 0.5 Sqmm with complete with all accessories etc complete all as specified and directed by Engineer-in-Charge.
Supply & fix energy saving and environmental friendly long life LED street light 35 Watt (Bldg security light) made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK08 fixed on wall with GI pipe of suitable dia and all fixing accessories including connecting up with & including twin core twisted flexible copper conductor cable of suitable size of 230V , 50 HZ etc complete all as specified and directed by Engineer-in-Charge
Supply & fix in replacement 36 Watt LED Panel 2X2 environmental friendly, new generation,aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source,6500 K suitable for armstrong/Grid ceiling, complete with separate electronic driver ceiling light 36 Watt with and including connecting up with & including twin core, twisted, flexible copper conductor cable of suitable size 230 Volt, 50 HZ etc complete all as specified and directed by Engineer-in-Charge .
M&L for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground. Earth pit not less than 2.25 m depth and top edge of the earth plate not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of nuts, bolts & washer etc. Earth wire connected upto main earth point / DBs alongwith 15mm dia earth protection pipe from top edge of the earth plate to main earth point to be connected and 20mm dia watering pipe light grade with funnel and provn of PCC using cement concrete (1:2:4) mix type B1 using granded stone aggregate and RCC pit cover 50 mm thick precost RCC (1:2:4) mix type B1 duly reinforced with 8 mm dia of TMT bar @ 100 mm CIC, both way, lifting arrangement complete including all necessary earth work etc complete all as specified and directed by Engineer-in-Charge.
M&L for Supply, laying, connecting, testing and commissioning and jointing, LT underground cable in replacement, 1100 volts grade, XLPE insulated, armored with galvanized round steel wire or steel strip, electric power cables heavy duty, with multi stranded aluminum conductor, laid in ducts, fixed on poles/walls with proper size saddles and clamp complete all as specified and as directed by the Engineer-in-Charge of following Sizes :- (a) LT cable 16 Sqmm, 4 core.
(b) LT cable 10 Sqmm, 4 core. Note for Ser Item No 85 & 86 : Excavation, Earthwork & pipe protection shall be measured and paid seprately under the relevant item of this Shcedule.
Excavation in trenches n. exc 1.5 m wide and n. exc 1.5 m in depth and getting out in hard/dense soil etc complete all as specified and directed by Engineer-in-Charge
Returnig, filling in including spreading, levelling, watering and well ramming in layers, n exc 25 cm thick in soil etc complete all as specified and directed by Engineer-in-Charge
Removing exacavated soil to a distance n. exc 50 m and depositing where directed at a level n. exc 1.5 m above the starting point etc complete all as specified and directed by Engineer-in-Charge
Supply &lay HDPE pipe 50 mm bore for laying of LT cable complete with all accessores etc complete all as specified and directed by Engineer-in-Charge
Taking out/ down and opening of existing ceiling fans 1200 mm sweep, from any position, of any make etc & refixing at the desired location after reassembling and after servicing/ overhauling by thouroghly cleaning the shaft, rotor, stator and applying lubricant/ grease to bearings and one coat of super enamelled varnish over winding to improve the insulation resistance including repair/ replacement of spare parts/ material/ items, making connection by replacing PVC insulated unsheathed cable of copper conductor of size 1.50 Sqmm upto 0.50 Mtr length including using material/ parts of minor nature such as screws, lugs, insulation tape, nuts, bolts, washers etc after cleaning the metal surface, greasing/ lubricant etc to make it functional complete all as specified and as directed.
Supply & fix in replacement capacitor 2.5/3 mfd, 250 volts, AC etc complete all as specified and directed by Engineer-in-Charge
Supply & fix in replacement ceiling fan canopy set of two of suitqable size of ceiling fan etc complete all as specified and directed by Engineer-in-Charge.
Supply & fix in replacement Ball bearing No 6201&6202 etc complete all as specified and directed by Engineer-in-Charge.
Supply and fix in replacement of down rod of suitable length made out of 15 mm bore medium grade GI pipe with & including clamp, nuts, bolts, split pins, washers, threading etc and making connections to make it functional etc complete all as specified and directed by Engineer-in-Charge
Note :- Schedule of Credit of Amount Rs. 71,724.00 shall be deducted from total amount.
stage.html
html • 0.07 MB
technical_841728.pdf
techsummary_841728.pdf
finance_841728.pdf
BOQ Comparative Chart
xlsx
finsummary_841728.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.25 MB
BOQ_841728.xls
BOQ • 0.59 MB
PS8182.pdf
Additional Documents • 1.04 MB
TenderDOCUS8182.pdf
Tender Documents • 0.73 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .