Loading
Loading…
Loading…
Tender Value
Refer Docs
Closing Date
12 Jan 2026, 1:30 pmClosed
Single Packet
Normal Tender
No
Not Applicable
Total Value Wise
Lowest to Highest
CONSIGNEE
Not Applicable
90 days
Expenditure
General
55
1 condition · 1 needing a document upload
The Railway reserve the right to place orders for entire or bulk quantity on OEMs or their authorized dealers as per GTC Clause No. 16.5 of ER.
33 conditions
Authorisation: In case of authorized dealers, firm has to submit tender specific authorization/dealership from OEM along with the offer, otherwise their offer will be liable to be rejected.
Make/Brand: Maker's name [and/or Brand] must be mentioned in the offer. If no make is mentioned, it will be presumed that stores will be of OWN make.
Delivery Place :FOR SSE/MTS (PE/JMP)
Marking: Manufacture name & date of manufacturing (month & year) should be pasted or marked/embossed on the product box/products without affecting the functional utility of the product. The material should be supplied in properly packed condition. Equivalent IS specification will also be applicable in place of DIN specification.
Guaranty/Warranty: As per Specification/drawing. If not mentioned in specification/drawing, it will be as per IRS conditions of contract.
Confirmation: You have gone through the Tender Documents consisting of Instructions to Tenderers, General Tender Conditions and Special Conditions of Tender, and you are agreed and confirm to abide by the Instructions to Tenderers, General Tender Conditions, IRS Conditions of Contract and the Special Conditions of Tender.
MSE: If you are not a MSE or a consortia of MSEs formed by NSIC, please indicate percentage of sub contracts in execution of this tender that will be from Micro and Small Enterprise(in percent of order value) with further breakup of MSE owned by SC/ST. (Information will be provided in % terms with 6 fileds; Micro owned by SC, Micro owned by ST, Micro owned by Others, Small industry owned by SC, Small industry owned by ST, Small industry owned by Others)
PVC: PVC clause will not be applicable in this tender.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions. Please refer to clause 28.0 for details.
Delivery from OEM's place: If you are dealer/authorized person, you are agreed to dispatch the stores directly from the manufacturer to the Railways consignee.
Proper address with PIN no of the Place of Inspection along with proof as per Tendered Condition must be mentioned
Valid UDYAM, specifically for Tendered Item must be submitted if applicable.
GST: (A) It shall be the responsibility of the Bidders to quote correct HSN Number and corresponding GST Rate, (B) The offer shall be evaluated based on the GST rate quoted by each bidder and same will be used for determining the inter-se-ranking. While submitting offer, it shall be the responsibility of the Bidder to ensure that they quote correct GST rate and HSN number, (C) Purchaser shall not be responsible for any misclassification of HSN number or incorrect GST rate if quoted by the bidder, (D) Wherever the successful bidder invoices the goods at GST rate or HSN number which is different from that incorporated in the Purchase Order, payment shall be made as per GST rate which is lower of the GST rate incorporated in the purchase order or billed, (E) Vendor is informed that she/he would be required to adjust her/his basic price to the extent required by higher tax billed as per invoice to match the all inclusive price as mentioned in the purchase order, (F) Any amendment to GST rate or HSN number in the contract shall be as per the contractual conditions and statutory amendments in the quoted GST rate and HSN number, under SVC.
MTC and MGC must be provided by the firm at the time of inspection as well as at the time of supply of materials.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Inspection by Consignee after delivery of material.
Authorized dealer must be uploaded a tender specific authorization of OEM.
1 condition
Offer validity: Offer must be valid for minimum 90 days from the date of tender opening.
1 location across Bihar · 4 Set total
Set of Cross trolley gear box
55256314A~ER
55256314A
Open - Indigenous
Goods
Bihar
₹0
Exempted
12 Jan 2026
22 Dec 2025
4 items · 4 Set total
Set of Cross trolley gear box components for EOT Crane no. 10377/WRS-IV, Cap- 30T:- (1)Cro ss Trolley gear box brake pulley shaft and Intermediate shaft pinion, as per sketch no. 39/06/MTS/A, dt- 29. 09.2018. Qty.- 01 no. each (2) Intermediate pinion stage-1 & stage-2, as per sketch no. 39/06/MTS/B, dt- 29 .09.2018. Qty.- 01 no. each (3)Output pinion and Intermediate stage-2 shaft pinion, as per sketch no. 39/06 /MTS/C, dt- 29.09.2018.,Qty- 01 no. each Material:- as per attached sketch. One set consist of Sl. no.(1) to ( 3). Total item qty- 06 nos. Note:-following certificates must be submitted at the time of delivery of material: - 1. Ultrasonic test of material. 2. Material test (Mech., Chemical & Hardness) should be done by NABL appr oved/ Govt. authorized test agency. 3. 02 yrs. guarantee certificate of the material should be submitted at t he time of delivery. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/MTS/JMP, ER | Bihar | 1.00 Set |
| Total | 1 Set | |
Set of Long travel gear box components for EOT Crane no. 10377/WRS-IV capacity- 30 T:- (1) LT Gear box brake pulley shaft & 1st stage intermediate shaft pinion as per Sketch No.- 38/06/MTS/A, date- 29.09.2018. Qty-02 nos. each (2) LT Gear box intermediate pinion 1st & 2nd Stage as per Sketch No.- 38/06 /MTS/B, date- 29.09.2018. Qty-02 nos. each (3)LT Gear box output pinion as per Sketch No.- 38/06/MTS/C, d ate- 29.09.2018 Qty-02 nos. (4) Intermediate shaft pinion stage-2 as per Sketch No.- 38/06/MTS/D, date- 29 .09.2018 Qty-02 nos. (5) LT Gear box brake pulley as per Sketch No.- 38/06/MTS/E, date- 29.09.2018 Qty-0 2 nos. Material:- As per attached sketch. One set consist of Sl. no.(1) to (5). Total item qty- 14 nos. Note:-fol lowing certificates must be submitted at the time of delivery of material:- 1. Ultrasonic test of material. 2. Material test (Mech., Chemical & Hardness) should be done by NABL approved/ Govt. authorized test agenc y. 3. 02 yrs. guarantee certificate of the material should be submitted at the time of delivery. [ Warranty P eriod: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/MTS/JMP, ER | Bihar | 1.00 Set |
| Total | 1 Set | |
Set of Long travel gear box components for EOT Crane no. 10774/WRS-III, Cap- 20T- (1) LT Ge ar box brake pulley shaft pinion as per Sketch No.- 40/06/MTS/A, date- 29.10.2018. Qty-02 nos., (2) Brake p ulley shaft matching gear, as per Sketch No.- 40/06/MTS/B, date- 29.10.2018. Qty-02 nos. (3) LT Gear box i ntermediate shaft pinion and out put gear as per Sketch No.- 40/06/MTS/C, date- 29.10.2018. Qty-02 nos e ach. (4.) Out put shaft & output coupling as per Sketch No.- 40/06/MTS/D, date- 29.10.2018.Qty-02 nos. eac h (5) LT brake pulley as per Sketch No.- 40/06/MTS/E, date- 29.10.2018. Qty-02 nos, Material:- As per attac hed sketch. One set consist of Sl. no.(1) to (5). Total item qty- 14 nos. Note:-following certificates must be s ubmitted at the time of delivery of material:- 1. Ultrasonic test of material. 2. Material test (Mech., Chemica l & Hardness) should be done by NABL approved/ Govt. authorized test agency. 3. 02 Years guarantee certif icate must be submitted at the time of delivery. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/MTS/JMP, ER | Bihar | 1.00 Set |
| Total | 1 Set | |
Set of long travel wheel and component for EOT Crane no. 10523/WRS-III, Cap- 20T:- (1) LT W heel as per Sketch no. - 100/06/MTS, Dtd.- 03/05/25. qty.- 04 nos. (2) LT Driving Wheel Shaft as per sketch no.- 101/06/MTS, dt-03.05.2025, Qty- 02 nos. (3) LT Trailing Wheel Shaft as per sketch no.- 102/06/MTS, dt- 03.05.2025, Qty.- 02 nos. (4) LT Wheel coupling as per sketch no.- 103/06/MTS, dt-03.05.2025. Qty.- 02 nos . (5) LT Wheel bearing housing & cover as per sketch no.- 104/06/MTS, dt-17.05.2025 for EOT Crane no. 10 788&10789/CBS, Cap-05T., Qty.- 16 nos,. Material- as per attached sketch. one set consist of sl. no. (1)to (5 ). total qty.- 26 nos. Note:-following certificates must be submitted at the time of delivery of material:- 1. Ul trasonic test of material. 2. Material test (Mech., Chemical & Hardness)should be done by NABL approved/ Govt. authorized test agency. 3. 02 yrs. guarantee certificate of the material should be submitted at the tim e of delivery. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/MTS/JMP, ER | Bihar | 1.00 Set |
| Total | 1 Set | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Sketchno.39-06-MTSDt-29.09.2018.pdf
ATTACHMENT
Sketchno.100-104-06-MTSdt-17-05-25_1.pdf
ATTACHMENT
Sketchno-40-06-MTSdt-29-10-2018.pdf
ATTACHMENT
Sketchno.38-06-MTSDt-29-09-2018.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .