DAY TO DAY MAINTENANCE OF B/R SERVICES AND OTHER MISC B/R REPAIR IN SV AREA AND OTHER DOMESTIC AREA AND EXTERNAL PERIODICAL SERVICES TO CERTAIN BUILDING IN DOMESTIC AREA AT AF STATION KALAIKUNDA

Amount

Resecuring or easing and adjusting without taking down of shutter of any description for the following sizes complete all as specified and directed :

Area not exceeding 1.00 sqm each

Area exceeding 1.00 sqm but not exceeding 2.00 sqm each of complete all as specified and directed :

Area exceeding 1.00 sqm but not exceeding 2.00 sqm each of complete all as specified and directed :

S & F in repairs Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

S & F in repairs 150mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed.

S & F in repairs Mild steel Drawers handles, projections drop (50mm to 65mm) on screwed plate complete all as specified and directed.

S & F in repair mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate ccomplete all as specified and directed.

S & F in repair mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate ccomplete fixed with running welding all as specified and directed.

Supply and Fix,3 mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sq M in each pane with and including hacking out old broken glass (any thickness, size, quality or description) from wooden frame including providing wooden beads painted with two coat of enamel paint over a coat of primer complete all as specified and directed.

Supply and Fix,3 mm thick sheet glass, ordinary quality and glazing with oil putty with spring clips in metal surrounds in squares not exceeding 0.50 Sq M in each pane with and including hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones

S & F 3mm thick figured Sheet glass pin headed type nd glazing with oil putty with spring clips in metal surrounds in squares not exceeding 0.50 Sq M in each pane with and including hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones.

M & L Securing glass of any description in existing wooden/metal frames glazed with putty/ beads including removing loose or decayed putty/ beads, spring wire glazing spring clips, painting/oiling one coat on rebates, grooves, reputtying and finally one coat synthetic enemal paint over puttied surface to match existing work (New length of frame reputtied shall be measured) complete all as specified and directed

S & F 20mm bore PVC coated MS conduit drapery rods, suitable for door/widows curtain with incl necessary fancy type dooms as approved by GE, and fitted to each end, with and inclding new brackets and fixed to wall complete all as specified and directed.

Supplying & fixing to floor, walls and ceiling 15 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 and taking up or down 15 mm bore of steel tubing and connections, including cleaning complete all as specified and as directed.

Supplying & fixing to floor, walls and ceiling 20 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 and taking up or down 15 mm bore of steel tubing and connections, including cleaning complete all as specified and as directed.

Taking up or down steel tubing 15mm bore and connections, including cleaning, rerunning the old screw threads as required for re fixing and fixing old steel tubing with all new tube fittings (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions, etc.) and fixing complete with clips, wall hooks, wooden plugs, or laying in trenches, etc and necessary connections in old position (Walls, ceiling, floors, etc.) complete all as specified and as directed

Taking up or down steel tubing 20mm bore and connections, including cleaning, rerunning the old screw threads as required for re fixing and fixing old steel tubing with all new tube fittings (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions, etc.) and fixing complete with clips, wall hooks, wooden plugs, or laying in trenches, etc and necessary connections in old position (Walls, ceiling, floors, etc.) complete all as specified and as directed

S&F in repairs PVC tank cover with locking arrangement for 500 ltrs to 1000ltr capacity of approved make complete all as specified & as directed.

S&F in repairs pillar taps 15mm dia, half turn, with capstan heads, chromium plated screwed down high pressure with or without lettered 'Hot' or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified & as directed.

S & F in repair 15mm dia Stop valves, cast copper alloy chromium plated fancy type , screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

S&F in repair 15mm size bib tap standard of PTMT any colour long body high pressure screwed for iron pipe and fixed (minimum weight 15mm – 90 gms) complete all as specified & as directed.

S & F in repair 15 mm bore PTMT Pillar taps of any colour high pressure screwed for iron pipe and fixed complete all as specified and as directed.(Minimum weight 15 mm -110 gms) complete all as specified & as directed.

S & F in repair 15 mm bore Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed with and including wall flange complete all as specified and as directed. (Minimum weight 15 mm-90 gms) complete all as specified & as directed.

S&F in repairs Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for 20mm bore dia iron pipe and fixed. (Minimum weight 20 mm - 210 gms)

S&F in repairs Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for 25mm bore dia iron pipe and fixed. (Minimum weight 25mm-455gms)

Supply and fixing in repairs of Grating doom 100mm dia of PTMT(Minimum weight 25gms) complete including jointing with solvent cement, all as specified & as directed.

S & F in repair of swivel shower of PTMT any coloured for fixing with 15 mm pipe complete all as specified and as directed. (Minimum weight 40 gms) complete all as specified & as directed.

S & F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified & as directed.

S & F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified & as directed.

S & F in Repairs of PVC washer for stop cock, bib tap, Pillar tap ,gate valve of any type all as specified and directed

S & F in Repairs brass spindle suitable for Cp piller tap,cp bib tap,angle cock all as specified and directed

S & F in repair of peg stay 300 mm long with 3/4 holes stove enameled black suitable for existing steel windows including nut/bolts complete all as specified and as directed.

S & F in repair of steel window handles, left/right stove enameled black with nut bolt & washers complete all as specified and as directed.

S/F in repair 32mm bore PVC waste down take pipe 900 to 1000mm fixed in WHB.

S/F in repair 40mm bore PVC waste down take pipe 900 to 1000mm fixed in sink

S & F in repairs PVC-U, type B as per IS 13592: 2013 single socketed soil waste pipes in any length with rubber ring joints, 75 mm dia, laid in trenches/floors complete all as specified and directed by Engineer- in- charge .

S & F in repairs PVC-U, type B as per IS 13592: 2013 single socketed soil waste pipes in any length with rubber ring joints, 110 mm dia, laid in trenches complete all as specified and directed by Engineer- in- charge .

S & F UPVC bends with inspection door (any angle), 75 mm dia conforming to IS 14735: 1999 complete all as specified and directed by Engineer- in- charge

S & F UPVC bends with inspection door (any angle), 110 mm dia conforming to IS 14735: 1999 complete all as specified and directed by Engineer- in- charge

S & F 75 mm bore PVC (SWR) branch piece single (Single `Y') equal or unequal with access door complete all as specified and directed by Engineer- in- charge

S & F 110 mm bore PVC (SWR) branch piece single (Single `Y') equal or unequal with access door complete all as specified and directed by Engineer- in- charge

S & F 75 mm bore PVC (SWR) Vent Cowl complete all as specified and directed by Engineer- in- charge

S & F 110 mm bore PVC (SWR) Vent Cowl complete all as specified and directed by Engineer- in- charge

S&F in repairs toilet paper holder with flat recessed type stainless steel complete all as specified and directed

S&F in repairs health faucet ((ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 meter long flexible tube and ABS wall 1.25 m long flexible tube and ABS wall hook including making connection and fixed in position complete all as specified and directed

S&F in repairs 32mm dia Waste coupling, brass , chromium plated for glazed ware , basins , etc. with long screwed shanks and fly -nuts , flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engineer- in- charge

S&F in repairs 40 mm dia Waste coupling, brass , chromium plated for glazed ware , basins , etc. with long screwed shanks and fly -nuts , flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engineer- in- charge

S & F in repairs brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges .

S&F chromium plated central hole basin mixer single lever without popup waste system with 450 mm long braided hoses complete inlcuding taking out unserviceable existing one complete all as specified and directed.

S&F in repair angle cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe.

S & F in repairs chromium plated with long shank and cup fancy type (Concealed) 15 mm nominal size, Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S & F in repairs 15 mm nominal size, nonrising spindle type fancy bib taps as per IS 8931: 1993 made of cast brass including Knob, knob components, divertor & components, nickel-chromium plated finish complete all as specified and as directed.

S&F in repair plastic water closet seat cover, Cream / white colour, closed pattern with flat bottom and cover and mild steel chromium plated aluminium hinging device for pedestral pattern WC.

S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long

S&F in repairs chromium plated single lever wall mixer 3-in-1 system with provision of both hand shower complete with 115mm long bend pipe, connecting legs and wall flange complete.

S&F in repairs Gun-metal, globe or gate valves for 20mm bore dia of pipe, with iron wheel head, screwed both ends for iron pipe and fixed

S&F in repairs 40mm wide and 5mm thick PVC door seal (snake guard) with powder coated aluminium frame

S & F in repairs wash basins, vitreous china, white, flat back, size 550 mm X 400 mm with and including cast iron brackets (embedded in wall upto 110 mm depth with and including cement concrete M15 (Nominal Mix) using 20 mm nominal size graded crushed stone aggregate or fixing on wall with and including rawl plug and screws), 32 mm nominal size, copper alloy, nickel chromium plated finish waste fittings, including painting of fittings and brackets, sealing gap between wall and basin with silicone sealant, cutting and making good the walls wherever required and connecting to supply pipes, waste pipes, waste fittings etc. with silicone sealant complete all as specified and as directed.

S & F in repairs vitreous china wash down water closet (pedestal pattern), white including thermoplastic seats and covers of grade 2 type, flat with hinging device of bronze or brass with nickel chromium plating, fixing bolt, connector to flush pipe and making connections to flush pipe, connector to branch soil pipe and anti syphonage pipes etc. including sealing the joints and making leak proof using sealant complete all as specified and as directed by Engineer-in-Charge.

S & F in repairs vitreous china squatting pan, 'Orissa" pattern, size 580 mm X 440 mm white with ‘P’ or ‘S” trap, front or back inlet and integral foot rests, any pattern and including fixing bolt, connector to flush pipe, lime concrete bedding and making connections to flush pipe, connector to branch pipe and anti syphonage pipes etc. including sealing the joints and making leak proof using sealant complete all as specified and as directed by Engineer-in-Charge.

Dismantling AC (corrugated or semi corrugated) sheets in roof covering complete all as specified and as directed by Engineer-in-Charge.

Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings

M & L for pre-painted hot-dip aluminium-zinc alloy metallic coated of any profile steel sheet corresponding to IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.50 mm thick, of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified up to 18 Mtr height including all necessary scaffolding and safety measures complete all as specified and directed

M & L for pre-painted hot-dip aluminium-zinc alloy metallic coated plain steel sheet as per IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.50 mm thick, of an approved colour and having yield strength of 550 MPa as in ridge/ valley/ gutter fixed with self tapping screws as specified up to 18 Mtr height including all necessary scaffolding and safety measures complete all as specified and directed

Dismantling structural steel work including doors, gates,guard bars but excluding framed trusses complete all as specified and as directed by Engineer-in-Charge.

S&F Rolled mild steel Framed work as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete GDE Fe410-0 Quality B complete all as specified and directed by Engineer-in-charge.

S&F Rolled mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails & guides) & hanging; also fastening & fixing complete GDE Fe410-0 Quality B complete all as specified and directed by Engineer-in-charge.

M&L for 1.00mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required

M&L for running welding in repairs n.exc 2.5cm in length on metals to be welded complete all as specified and directed by Engineer-in-charge

M&L for welding in repairs exc 20mm but n.exc 25mm in length and thickness of metal n.exc 6 mm complete all as specified and directed by Engineer-in-charge

Dismantling floor, hearth or wall tiling including cement mortar bedding , removing serviceable tiles to store and rubbish off the premises

M & L for glazed, colour ceramic wall tiles (group B III), of size 300 x 200 x 7 mm thick on vertical surfaces including 10 mm thick backing coat in cement mortar (1:3), set and jointed in neat cement slurry and pointed in white or colour cement to match all as specified and directed.

M & L for glazed, colour ceramic wall tiles (group B III), of size 450 x 350 x 7 mm thick on vertical surfaces including 10 mm thick backing coat in cement mortar (1:3), set and jointed in neat cement slurry and pointed in white or colour cement to match all as specified and directed.

M & L for non skid, rectified, colour ceramic floor tiles (group B II), area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, length more than 460 mm but less than 700 mm, minimum 8 mm thick in floors including 15 mm thick screed bed or bedding in cement mortar(1:4) set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed.

M & L for non skid, rectified, colour ceramic floor tiles (group B II), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, length more than 460 mm but less than 700 mm, minimum 8 mm thick in floors including 15 mm thick screed bed or bedding in cement mortar(1:4) set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed.

Material and labour for 30 mm thick glazed finished machine vibrated precast chequered cement concrete tiles (coloured) as in floor of size 300 x 300mm set and jointed with neat cement slurry and pointed in white/coloured cement to match the surface laid over and including 20mm thick screed bed in CM(1:6) complete all as specified and as directed by the Engr-in-Charge.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc

M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms and like over and including 20mm thick screed bed or bedding layer in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as directed.

Taking down cement or cement lime plaster on brick or stone walls etc. including racking out joints hacking for key scrubbing down with water etc.complete.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed by Engineer in charge.

M & L for brick work with sub class 'B' bricks(Fly ash), straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed.

All as per item no 80 here-in-before but except bricks complete all as specified and as directed.

M&L Brick work with sub class B bricks (Fly Ash) straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:4) complete all as specified and as directed.

Materials and Labour for rendering 5mm thick, cement plaster, in cement mortar (1:4) mixed with water proofing compound as per manufactures instructions over and including 10mm thick backing coat in cement mortar (1:4) on fair faces of brick work or concrete surface in walls, at any height and safety measures complete all as specified and directed. Note: - (Water proofing compound will be measured and paid separately)

Supply only liquid water proofing compound.

M & L for rendering 5mm thick cement plaster in cm 1:3 on ceiling including finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for plastering 10 mm thick on fair faces of brick work or concrete surfaces (on vertical surfaces) in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

M & L for preparation of new plastered surfaces of ceilings and applying three coats of white wash complete all as specified and as directed.

M & L for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed.

Material and labour for preparation of newly plastered/putty wall surfaces and applying two coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over and including a coat of primer and wall care putty (1.5 mm thick) complete all as specified and as directed.

M&L for complete removal of existing treatment from walls, and applying two coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over and including a coat of primer and wall care putty (1.5 mm thick) complete all as specified and as directed.

M&L for preparing old decorated plastered or unplasterd surfaces of wall including cornices, pilasters and other wall features etc by brooming down or steel wire brushing and sand paper, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and removing extra wall papdi ,peel off wall papdi by sand paper and making good with putty as per existing thickness and applying one coat of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete all as specified and directed

M&L for preparation of old painted surfaces and applying one coat of synthetic enamel paint on wooden surfaces of any description not other wise described over 10 cm width or grith etc complete all as specifed and as directed.

M&L for preparation of old painted surfaces and applying one coat of synthetic enamel paint on steel surfaces of any description not other wise described over 10 cm width or grith etc complete all as specifed and as directed.

Demolition of cement concrete in ground floors and paving not exceeding 15 cm thickness (below or above ground level)

M & L for providing cement concrete type C1, 1:3:6 (20mm stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork, as directed complete all as specified and directed by Engineer- in-charge.

M&L for 40mm thick cement concrete type B1 1:2:4 (20mm stone aggregate) as in floors and pavings finished even and smooth with out using extrs cement etc complete all as specified.

M&L for cement concretet (1:3:6), type C2 using 40 mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified

M&L for 75mm thick PCC 1:3:6 type C2 with using 40 mm graded stone aggregate as in sub floor laid in panels finished rough to receive top layer, complete all as specified and directed by Engr-in-Charge.

Material and labour for Machine pressed rubber moulded precast concrete interlocking paver block(Coloured) , any size and shape conforming to IS 15658-2006 of 60mm thickness, M-35 grade over 50 mm thick sand cushioning(Consolidated including watering ramming and consolidation) complete all as specified.

S & F in repairs 10 litres capacity, low level, syphonic type, white, plastic flushing cistern as per IS 7231: 1994 with inlet, ball valve, float and handle including brackets and 40 mm nominal dia high density polyethylene pipes for flush pipe complete all as specified and as directed.

Taking down shutters of any description n .exc 1 sq. m each .complete all as specified and directed.

Taking down shutters of any description exc 1 sq. m and not exc 2 sq. m each .complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 sqm each complete all as specified and as directed (unit rate shall be inclusive of demolition of cement concrete blocks for embedding hold fasts complete.)

Taking down chowkats of frames wth shutters (without taking out off shutters from the frame) exc 1.5 sqm and n exc 4.00 sqm each including hold fasts and removing the same from site complete all as specified and as directed. (unit rate shall be inclusive of demolition of cement concrete blocks for embedding hold fasts complete.)

S & F pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.25 mm thickness, size 105 mm X 60 mm, Profile C, single rebate or more including necessary fixing lugs, hinges(03 Nos of 100 mm size and 01 No of 50 mm size medium weight coled rolled mild steel butt hinges per leaf ) lock strike plate, etc incl one shop coat of priming complete all as specified and directed

S & F pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, size 125 mm X 60 mm, Profile C, single rebate or more including necessary fixing lugs, hinges(03 Nos of 100 mm size and 01 No of 50 mm size medium weight coled rolled mild steel butt hinges per leaf ) lock strike plate, etc incl one shop coat of priming complete all as specified and directed

S & F 35 mm thick, 2nd class hardwood of durability class II as per IS 12896: 1990 factory made, panelled shutters (two panels) with lock rail and panel of 12 mm thick veneered particle board, Grade -I, Type -I (solid core, general purpose), designation (SO GP-I) conforming to IS 3097 supplied and fixed to chowkhats. The size of style and rail as per IS 1003 (Part I) kiln seasoned and chemically pressure treated complete all as specified and as directed.

M & L for 35 mm thick 2nd class hardwood of durability class II as per IS 12896: 1990, factory made, glazed and skeleton shutters, open rebated and prepared to receive glass, wire gauze, etc. (without sash bar), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part-I section 8 Clause 8.24 (a) complete all as specified and as directed by the Engineer-in-Charge.

Supply and Fix, factory made solid panel prelam PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded prelam PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail: Panelling of both sides plain PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, fixed to door frame complete all as specified and directed.

Supply and Fix, solid PVC door frame of size 50 mm X 47 mm made out of 5 mm Prelam PVC sheet reinforced with MS square tube, fixed in opening all as specified and directed.

S & F flush door shutters, 40 mm thick, solid core of block boards with construction, MR grade, commercial type with stiles, rails and lipping of timber as given in Group 2A and Group 2B of Annex B of IS 2202 (Part 1): 1999, both sides face panels of plywood as per IS 710: 2010, covered with decorative face veneer with lipping in both side faces complete all as specified and as directed.

S&F of second class hard wood for small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours, articles n.exc 200 cucm each complete all as specified & as directed.

S & F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded including making good disturbed surfaces as per existing specfication complete all as specified and directed.

S & F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded including making good disturbed surfaces as per existing specfication complete all as specified and directed.

Supply and Fix, steel ventilator with top hung shutter including hinges, steel peg stay, complete, dovetailed or welded, including making good disturbed surfaces as per existing specfication complete all as specified and directed.

Materials and Labour for plain cement concrete (1:2:4) type B0 using 12.5 mm graded aggregate in lintels up to 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles throating,and roof padding as directed including necessary from work complete all as specified and directed.

Supply & fix sheet glass, ordinary quality, 4 mm thick and glazed with oil putty or fixed with beads in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.

S & F 4 mm thick figured glass, pin head type and glazing with oil putty or fixed with beads in square not exceeding 0.5 sqm in each pane complete all as specified and as directed.

S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

S & F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed

Supply and fixing framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barried iron doors, ladders, framed balusters, walk ways, railings, and similar work conforming to FE.290.Gde-E-165

S & F aluminium barrel tower bolts with barrel and bolt of extruded sections of aluminium alloys, 150 mm long, anodized finish not be less than Grade AC 10 of IS 1868 : 1996 with transparent anodic film complete all as specified and as directed.

S & F aluminium barrel tower bolts with barrel and bolt of extruded sections of aluminium alloys, 200 mm long, anodized finish not be less than Grade AC 10 of IS 1868 : 1996 with transparent anodic film complete all as specified and as directed.

S & F aluminium alloy sliding door bolts with hasp, staple and fixing clips of sheets, or extruded sections and fixing bolts and sliding bolts of extruded sections of aluminium alloy, 300 mm long, anodized to a bright natural, mat finish not be less than Grade AC 10 of IS 1868 : 1996 complete all as specified and as directed.

S & F 100 mm medium weight mild steel butt hinges made out of cold reduced low carbon steel or hot rolled carbon steel as per IS 1341: 1992 complete all as specified and as directed.

S & F 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21

S&F 150mm long mild steel ordinary quality rat rail rod pattern spring including roller plate complete fixed to steel surfaces including necessary welding complete all as specified and directed.

S&F 150mm aluminum extruded aluminium alloy handles (fabricated type) anodised of mat finish not be less than Grade AC 10 of IS 1868 : 1996 complete all as specified and as directed.

S & F plain fillets of 2nd class hard wood in square, rectangular or triangular in section wrought secured with screw, but not exceeding 6 sqcm complete all as specified and directed.

S&F 30mm width of flaps (when open) Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed.

S&F in repair 18 mm thick Block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on one face and including 6mm thick teak wood beading around as in cupboard shelves, pelmet boxes etc fixed with screws to timber frame work complete all as specified and as directed.

S&F in repair 18mm thick Block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on one face as as in cupboard shutter, partition fixed with timber/steel frame work complete all as specified and as directed.

Material and Labour for applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on new steel and iron surface exceeding 10 cm in width or girth including preparation of surfaces complete all as specified and directed.

M & L for preparation of new or previously untreated wood or wooden surfaces, of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S&F in repairs PVC washer for 10 Ltr capacity PVC valveless, syphonic action type flushing cistern, low level.

S&F in repairs PVC handle for 10 Ltr capacity PVC valveless, syphonic action type flushing cistern, low level.

S&F in repairs PVC float for 10 Ltr capacity PVC valveless, syphonic action type flushing cistern, low level.

S&F in repairs PVC syphon for 10 Ltr capacity PVC valveless, syphonic action type flushing cistern, low level.

S&F in repairs rubber gasket for 10 Ltr capacity PVC valveless, syphonic action type flushing cistern, low level.

S & F rotational moulded polyethylene multi- layer water tanks (vertical cylindrical with close top) as per IS 12701: 1996 of 500 litres capacity hoisted and fixed in position including provision of 20 mm /15 mm dia medium grade GI pipe for connecting inlet, outlet, over flow and washout pipes including dismantling the existing one and removing to store complete all as specified and as directed.

S & F rotational moulded polyethylene multi- layer water tanks (vertical cylindrical with close top) as per IS 12701: 1996 of 1000 litres capacity hoisted and fixed in position including provision of 20 mm /15 mm dia medium grade GI pipe for connecting inlet, outlet, over flow and washout pipes including dismantling the existing one and removing to store complete all as specified and as directed.

M&L cleaning of service PVC tank by rubbing vertical wall and bottom of with bleaching powder and allowed ½ hour to react and then washing down with water to get free from deposits and bleaching inside the tank of capacity exceeding 250 ltrs & upto 500 ltrs capacity complete including lettering/numbering Date of Cleaning all as specified & as directed.

M&L cleaning of service PVC tank by rubbing vertical wall and bottom of with bleaching powder and allowed ½ hour to react and then washing down with water to get free from deposits and bleaching inside the tank of capacity exceeding 500 ltrs & upto 1000 ltrs capacity complete including lettering/numbering Date of Cleaning all as specified & as directed.

Taking down Aluminium door shutters of any size and refixing in the same opening including making petty repairs as required like cleaning and repair/replacement of beadings, glazing clips, rubber gasket, stoppers, adjusting tower bolts, locks, hydraulic door closer, hinges, pivot etc and make smooth functioning complete all as specified and as directed .Note spare parts required to be replaced deemed to be included in quoated rates

Taking down Aluminium window shutters of any size and refixing in the same opening including making petty repairs as required incl cleaning and repair/replacement of beadings, glazing clips, stoppers, rubber beading, locks, stays, hinges, roller etc and make smooth functioning complete all as specified and as directed.Note spare parts required to be replaced deemed to be included in quoated rates

S & F in repairs double action concealed type floor springs (hydraulically regulated) made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel top cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed.

S & F in repairs exposed type hydraulically regulated door closers, universal closer, bottle type (type A), Designation No. 3, suitable for 61 kg to 80 kg mass of doors & 851 mm to 1000 mm width of door, aluminium alloy non porous body and black plate, aluminium alloy piston or pack piston/ pillion, anodized finish not be less than Grade AC 15 of IS 1868 : 1996 with transparent anodic film as per IS 3564: 1995 complete all as specified and as directed.

S&F in Repair 150mm Floor door stopper of Brass body and tongue, anodised, with hard drawn steel spring, fixed in floor as per specified and directed

S&F in repairs two way bib cock 15mm, CP with single knob and wall flange complete all as specified and directed.Make:Cera or equivalent.

S&F PVC (SWR) floor trap plain with grating lincluding jointing with solvent cement 75mm dia all as specified.

S&F in repair stainless steel soap dish, any type fixed to plugs chromium plated brass screws complete.

S&F in repairs towel Ring round (6 inch dia) with round flange of SS grade 304 including brackets. complete all as specified and as directed.Make:Cera or equivalent.

S&F in Repair 100mm Size Brass Mortice lock, vertical type,4 lever as per specified and directed

S & F in repair Stainless Steel Kitchen Sink with drainage board made of stainless steel 1 mm thk. kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or incl fixing catilever brackets and connection union to pipe overall size 915mm x 460mm Bowl size 410mm x 330mmx 160mm including making disturbed surface with good including removing of rubbish material complete

Preparing surface of sunken slab and applying 15 mm thick cement plaster 1:4 cement sand mortar with integral water proofing compound both on floor and wall. including , laying and testing of elastomeric bituminous coating system based on bituminous emulsion, polymer and additive conforming to ASTM C 836 (“Dr. Fixit Solyseal" or equivalent of M/s Fosroc, M/s STP Limited) over the substrate including application of one coat of primer (solyseal 1 : water 1) followed by two coats of solyseal applied @ 0.90 kg/sqm/coat sandwiched with open woven glass fibre of mesh 2 mm X 2 mm or PE based spun bound fabric of 40 gsm complete as per manufacturer specification in sunken portion with and including sunken floor shall be filled with PCC 1:3:6 as per existing thickness complete all as specified.

M&L for preparing old decorated plastered or unplasterd surfaces of wall including cornices, pilasters and other wall features etc by brooming down or steel wire brushing/sand paper, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and removing extra wall papdi ,peel off wall papdi by sand paper and making good with putty as per existing thickness and applying one coat cement base paint on old surfaces including all necessary scaffolding and safety measures complete all as specified and directed

M&L for preparing old decorated plastered or unplasterd surfaces of wall including cornices, pilasters and other wall features etc by brooming down or steel wire brushing/sand paper, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and removing extra wall papdi ,peel off wall papdi by sand paper and making good with putty as per existing thickness and applying two coat cement base paint on old surfaces including all necessary scaffolding and safety measures complete all as specified and directed

M&L for preparing old decorated plastered or unplasterd surfaces of wall including cornices, pilasters and other wall features etc by brooming down or steel wire brushing and sand paper, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and removing extra wall papdi ,peel off wall papdi by sand paper and making good with putty as per existing thickness and applying two coat of white washing on the wall all as specified and directed including all necessary scaffolding and safety measures complete all as specified and directed

M&L for preparing old decorated plastered or unplasterd surfaces of wall including cornices, pilasters and other wall features etc by brooming down or steel wire brushing and sand paper, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and removing extra wall papdi ,peel off wall papdi by sand paper and making good with external wall care putty as per existing thickness and applying one coat of100 % Acrylic Exterior Emulsion paint on old surfaces complete all as specified and as directed including all necessary scaffolding and safety measures complete all as specified and directed

Material & Labour for preparation of new surfaces of plastered walls and applying two coat of 100 % Acrylic Exterior Emulsion paint of tint (as approved by GE) over and including a coat of primer over and including a coat of 1.5 mm thick white wall care putty (premium quality) over plastered surfaces of walls to prepare the surface even and smooth, at any height including all necessary scaffolding and safety measures complete all as specified and directed

Material & Labour for preparation of new surfaces of plastered walls and applying two coat of cement base paint of tint (as approved by GE) over and including a coat of alkali resistant primer , at any height including all necessary scaffolding and safety measures complete all as specified and directed

M&L for writing letters or figures Block, Roman, Italic or Indian) n.exc. 30 cm high with thick paint, so that they stand out boldly and solidly without showing signs of brush marks (if necessary, they shall be repainted until the desired result is obtained) complete all as specified and as directed.

S & F in repairs Kitchen stainless steel (1 mm th) plate rack (24" X 24" X 10") including necessary fixing / fittings & making good the existing surfaces complete all as specified and directed.

M&L for writing stops, commas, short lines, dashes, hyphens, brackets etc with with thick paint, so that they stand out boldly and solidly without showing signs of brush marks (if necessary, they shall be repainted until the desired result is obtained) complete all as specified and as directed.

Rate quoated above items item no.01 to 121 here in before inclusive provision as under :Making arrangement for establishment of centralized complaint centre in the existing building as under :- (a) Infrastructure required in Complaint cell i.e. telephone, furniture, stationary, transport and other necessary items/materials to establish a new complaint centre able to receive and manage complaints from the users by all means ie Manual complaint mechanism, Telephonic complaints mechanism, SMS complaint Mechanism and e-mail complaint mechanism and to maintain a consolidated list of complaints and its redressal mode indicating all its relevant data. (b) Computer data operator shall be able to manage all the necessary activities and having qualification as Graduate in any discipline with minimum one year certificate course of computer applications (from a Govt recognized institute), (c ) Provision and maintenance of all tools, plants, equipment and safely gear required for tradesmen under this contract (d) Provision of communication facilities to supervisor and tradesmen. (e) Monitoring and management of complaints report from generation to execution of complaint including pending complaints. (f) Updating status of lodged complaints before change of eight hour shift. (g) Provision of motorized conveyance for deployment to all tradesmen under this contract. (h) Basic inputs to be noted from the complainants will be locality, Building No, Qtr No, Name and Rank of complaint and exact nature of complaint and mobile No/ telephone

(j) On lodging the complaint, the Complaint No will be assigned for reference . Also system should indicate an approximate time for repairs. Accordingly a corresponding complaint slip shall be generated by the system with all relevant info. Complaint slip should be printed in triplicate and to be handed over immediately to Supervisor who shall detail appropriate tradesmen for repair with required materials/store. One copy of complaint shall be retained in complaint centre and two copies with tradesmen. (k) On both copies of complaint slip, status of the complaint attended shall be endorsed by the complaint/user. One copy to be retained by the complainant and second copy to be with tradesmen for handing over in the complaint centre. Reasons for non attending of complaint etc shall be recorded alongwith estimate of expected time to attend and rectifying the complaint. (l) At the end of each day, summary of complaints shall be prepared and generated indicating No of complaints lodged, attended in time, Reasons for not attending , probable time required for attending the pending complaints etc (m) JE in charge of MES will review the complaints recorded in the system daily and will carry out personal inspection of complaints attended and its status and will take remedial measures in this regard. (n) AGE will visit the complaint cell at least thrice a week and GE at least once a weak to check the efficacy of the system and record their remarks accordingly. Note : Contractor shall be responsible for followings :- (i) Installation of landline telephone connection with internet broadband facility, obtaining SIM cards for mobile phones for supervisor and workers, deployed by the contractor. (ii) Implementation of Bio-metric system for attendance of supervisors and workers, deployed by the contractor.. (iiii) Payment of telephone bills, internet charges, mobile bills, expenses etc shall be borne by the contractor and no claim whatsoever on this account will be admissible by the department.

M/S KANAN TRADERS (BID ID -3101872)

Dilip Enterprise (BID ID -3102205)

Ray Enterprise (BID ID -3104150)

M/S OM BUILDERS (BID ID -3119413)