Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹1.0 LAccepted-AOC CANDOLIM VILLA NO 3 CRESCENT VILLA CANDOLIM GOA CANDOLIM NORTH GOA GOA 403515 | NORTH GOA | GOA | 403515 | ₹1.0 L | 1 | Accepted-AOC Lowest Bidder |
| Sl No | Description | Qty | Unit | PCI PEST CONTROL PRIVATE LIMITED L1 |
|---|---|---|---|---|
| 1.00 | NS Item: Post construction of Anti-Termite Treatment will be provided by drilling 10 mm diameter holes at 30 cm’s interval along the junction of floor and wall as well as along the columns, injecting chemical emulsion into the same. These holes will then be plugged with matching cement. Chemical to be used – Imidex. | 7,900 | Sft | 11.4 ₹90,060 Lowest |
Tender Value
₹1.1 L
EMD Value
₹2,186
Closing Date
11 May 2026, 3:00 pmClosed
Registrar
DLCSUPVA
Anti-termite treatment for Central Library and Architecture Library in DLCSUPVA, Rohtak
2026_HRY_519010_1
2026/antitermiteLib3rdcall
Open Tender
Civil Works
Tender
60 days
DLCSUPVA
Anti-termite treatment for Central Library and Architecture Library in DLCSUPVA, Rohtak
2 documents required · 2 mandatory
₹1,000
Yes
₹2,186
Yes
18 Sept 2026
2 May 2026
11 May 2026
2 May 2026
11 May 2026
2 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | HSR 4.40.4.1: Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1 :2 (1 cement : 2 coarse sand) to the full depth of the hole : With Chlorpyriphos/Lindane E.C. 20% with 1 % concentration | 71.02 | Mtr. | 18.96 | ₹1,346.54 |
| 2 | HSR 4.38.1: Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/ Lindane emulsifiable concentrate of 20% | 12.07 | Ltr. | 232.87 | ₹2,810.74 |
| 3 | HSR 5.29.1: Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead: Of area 3 sq. metres and below. | 1 | No. | 127.5 | ₹127.5 |
| 4 | HSR 12.37.1: Providing and fixing ISI marked flush door shutters conforming to IS:2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. | 1.57 | Sqm | 1,652.26 | ₹2,594.05 |
| 5 | HSR 13.21.2: Supply & fixing Windows frames (Chowkhats) including mullions consisting frame fabricated from sheet roll formed out of 1.2mm thick galvanized sheet as per IS:277 (Base steel as per IS 513) with zinc of 120 gm/sqm & Powder coated with pure Polyester powder up to 50 microns (as per approved colour), 3 Nos. 100mm butt - hinges 2mm thick, 6 Nos. 1.2mm thick CRCA electroplated stiffner, 6 Nos. M.S hold fast with split and tail welded to stiffner plate 200mm long, receiver for aldrop, weld less corner assembly with brackets & screws, M.S tie rod 50mm x 25mm to be fixed at bottom finished with powder coated total thickness of coating 0.6mm of approved shade, fixed in position including the cost of cement concrete for 1 :2:4 for fixing lugs complete in all respects as per drawing, design, specification & entire satisfaction of Engineer-in-charge. Door Frame of size 125mm x 60mm with 37mm wide double rebate for 35mm door shutter. | 5.11 | Mtr. | 1,463.65 | ₹7,479.25 |
| 6 | HSR 11.76: Preparation of ply wood surface for painting including sand papering the surface and applying filling with approved quality filler consisting of white lead, linseed oil, varnish and chalk mitti including finishing the surface to required finish complete. | 1.57 | Sqm | 43.2 | ₹67.82 |
| 7 | HSR 11.82: Painting the wooden I metal surface with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work. | 1.57 | Sqm | 57.96 | ₹91 |
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.05 MB
BOQ_597906.xls
BOQ • 0.30 MB
AntitermitetreatmentlibraryTenderDoc.pdf
Additional Documents • 1.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .