Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.4 LAccepted-AOC | L1 | Accepted-AOC Bid Value amount is Less | |
| 2 | L2₹13.5 L+₹8,058.37 (0.60%)Rejected-Finance | L2 | Rejected-Finance Bid Value Amount Above |
Tender Value
₹15 L
EMD Value
₹15,000
Closing Date
12 Sept 2024, 3:00 pmClosed
Executive Officer
Boothipuram Town Panchayat Office
MLA Work 2024 2025 Construction of Anganwadi building at valayathupatti in Boothipuram Town Panchayat Theni District
2024_DTP_477754_1
202/2023
Open Tender
Civil Works - Buildings
Works
180 days
Boothipuram Town Panchayat Office
As per Tender Document
3 documents required · 3 mandatory
₹0
₹15,000
Yes
Boothipuram Town Panchayat Office
13 Sept 2024
29 Aug 2024
12 Sept 2024
29 Aug 2024
12 Sept 2024
29 Aug 2024
29 Aug 2024 - 4 Sept 2024
4 Sept 2024
Amount
Earthwork excavation for foundation in all soils and to the full depth as may be directed except hard rock not requiring blasting inclusive of shoring, shuttering and baling of water wherever necessary refilling the sides of foundation with excavated earth in layers of 15cm thick well rammed and compacted depositing the surplus earth in places shown by the Departmental Officers with initial lead of 10 Meters and lift of 2 Meters and lift of 2 Meters and clearing leveling the site etc. complete.
Plain Cement concrete Using 1:4:8 mix (one part cement, Four part sand Eight part aggregates) using 40mm ISS gauge HBG metal including cost and conveyance of all materials to work site and all labour charges for mixing, laying, consolidating and curing etc., complete as per standard specification. TNDSS NO: 28 V, VI (S2) V, VI (S5A) VII
Centering for sides and soffits and RCC slabs and beams, lintels and other flat surfaces below 3M height including strutting and strutting arrangements as per Standard Specification and removing the same after the specified period and including cost and conveyance of all other incidental charges etc., complete as per Standard Specification Grade Beam
Column Post
Roof Slab
Supplying and Fabrication of Steel TMT Rad for all RCC Works including cost fo Steel binding wire and labour charges and Fabrication and placing in position etc., complete as per Standard Specification
Reinforced Cement Concrete 1:1½:3 Mix (One part cement, one and half part sand and three part of aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc. Complete with std. Specifications.(Using Vibrator) TNDSS NO: 30 V, VI (S3), VII-3.
Brick work in Cement mortar 1:5 mix using country bricks of size 8.3/4" X 41/4" X 2" including all cost and convayance of all Materials to site and all labour charges for mixing mortor curring etc complete.
Supply and Filling M-Sand including cost and conveyance and all labour charges for Filling, laying and curing etc.
Providing and laying well Gravel thick including cost and conveyance of Gravel from approved quarry to working site and stacking them to departmental gauge for pre measurement including labourcharges for sperading watering including all leads for water and consolidation by power roller rolling including hire and fuel charges for all tools and plants employed and all other incidental charges etc, complete complying as per clause 301&305 of MORTH specification.
Special ceiling Plastering in Cement Mortor 1:3 Mix (one Cement, Three sand ) 10mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete . complying with std. specifications-10 m2.
Plastering with Cement Mortar 1:5 (One Cement five sand) mix, 12 mm thick and including cost and conveyance of all materials to site and all labour charges etc., complete as per Standard Specification
Supply, fabricating & fixing in position of M.S door of size 0.90 x 2.10m. The outer frame will be 25 x 25 x 3mm angle, the side frame with outer bars and M.S Sheets 1.60mm thick 20gauge MS sheet with necessary hinges, tower bolt, aldrop length 30mm and hold fast etc., complete complying with standard specifications.
Supply, fabricating & fixing in position of M.S window outer frame will be 25 x 25 x 3mm angle, the side frame with outer bars and M.S Sheets 1.60mm thick 20gauge MS sheet with necessary hinges, tower bolt, aldrop length 30mm and hold fast etc., complete complying with standard specifications.
Supply and fixing in position of RCC Jolly 50mmtk including cost and conveyance of all material to site and all other labour charges for fixing etc., Complete.
Supplying and fixing RCC Pre cast slab in RCC 1:1 1/2:3 mix including cost of reinforcement grill but including moduling, finishing watering curing and fixing in position etc., Complete as per std., Specifications.,
Supplying and fixing over the floors best quality of scratch ceramic tiles of 30 c.m x 30c.m x 6mm size of approved colour laying with cement mortor 1:3 mix pointing the joints with colour pigments etc. Complete.
Dadooing the walls with glazed tiles of 30 c.m x 20 c.m 6mm size laid in cement mortor 1:2 mix 10mm thick and pointing with 0.40 kg white cement per m2 etc.
Exterior Emulsion paint Two coats with good quality of approved Emulsion paint including cost of all materials to site and all labour charges for mixing applying and proper curring etc., Complete as per Standard Specifications for 10 sqm
Painting two coats of new iron work with first quality of synthetic enamal paint over one coar of primer etc., complete.
Weathering Course with broken brick jelly 20mm size pure slacked lime over R.C.C. roof slab the preparation of 32:12.5 for required depth and slope etc. complete.
Finishing with one course of machine pressed tiles of size 20cm x 20 cm x 2 cm with cement mortor 1:3mix with crued oil water proofing compound with same mortor pointing including cost and conveyance of all materials and all labour Charges
Supplying and fixing in Position of Indian Oriya pan type water closet with “P’’ or “S’’ trap to set in brick jelly concrete 1:4:8 Mix concrete 10 cm thick using 20mm brick jelly and top finished with c.m. 1:3 mix 20mm thick without any leakage etc. complete.
Supply and providing 1000 litres capacity Priming Tank made up of PVC including all cost and conveyance etc complete. Make: SINTEX / EQUIVALENT (PWD SOR 2021-22 Item 358)
Supply and Fixing in position best quality PVC pipes of 25mm dia having 10kg/Sq.cm. Pressure BIS mark etc, complete complying with standard specifications.(PWD SOR 2021-22 Item 390-c)
Supply and Fixing in position best quality PVC pipes of 110mm dia having 6kg/Sq.cm. Pressure BIS mark etc, complete complying with standard specifications.(PWD SOR 2021-22 Item 390-k)
Providing and fixing the PVC Screw Down Tap Heavy Type 20mm dia including all cost and conveyance etc complete. (PWD SOR 2021-22 Item 160)
Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A FT switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / fan point (for electronic regulator) (SD23)
Supply delivery and fixing 4' 18W crystal Glass LED Tube Light fitting (Havells/ Equivalent) including all cost and conveyance etc complete (PWD SOR 2021-22 electrical Item 5)
Supply and fixing of 1400mm (56") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp including all cost and conveyance etc complete (PWD elecrical SOR 2021-22 SD111)
Supply and run of 2 of 4 sqmm. (56/0.3) PVC insulated SC unsheathed copper conductor of 1100V on 7/20 GI bearer wire for service connection mains. (SD 65)
Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in 25mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains (SD 70)
Supply and fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit (500V) 32A neutral link and earth link (1" x 1/8" copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit (SD 125)
Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls Brick / Stone Masonry in cement mortar walls under 3m high (i.Up to Basement + ii.Ground Floor)
Dismantling RCC using deploying machineries (i.Up to Plinth + ii.Above Plinth Level)
VEERA CONSTRUCTION (BID ID -1129448)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .