ADDN ALTN TO AUDIOMETRY ROOM IN ENT OPD AND PROVISION OF ADDL 2 TOILET AT ARMY HOSP RR UNDER GE EM RR HOSPITAL DELHI CANTT 10

Amount

Providing and fixing of Drywall with wood framework and GI for support, Wood baton(pine wood) of 2" x 1.5" running as studs and tracks separated 610mm a Grid framework for Rockwool (48kg/m3 density) insulation to be filled inside the cavities. Supply and Installation of. Insulation slabs. 2 inch in thickness Rockwool Insulation (48density) with NRC 1.00(high) and S.T.C of 55 Db. Excellent Thermal and Sound Insulation, As safety-wise it is fire proof with melting point above 750 degree, framework having excellent stiffness and recovery “A" with thermal Resistance > 0.4 Supply and Installation of screwed onto the main structure of the wall (2”) panels in order to apply 12mm block board of main primary structure. Air lock with leak-proof clear silicone fill all over the Wall Structure inner edges The panels with 2"(50MM) thick box panel shall have infill acoustic material density varies from 48kg/m3 (Rockwool as acoustic material). The Material shall have the ability to attain 50% insertion loss and attenuate incident sound energy from frequencies that are concentrated in the 125 to 8000 hertz range to meet the ANSI standards. The external surface having cladded with 0,96/0.93 NCR rated thick fabric &, etc. complete all as directed. Acoustic Treatment: Wall Final Finish. By thick fabric for maintain the reverberation.

SOUNDPROOFING CEILING SPECIFICATION Providing and fixing of ceiling with wood framework and GI for support, Wood baton(pine wood) of 2" x 1.5" running as studs and tracks separated 610mm a Grid framework for Rockwool (48kg/m3 density) insulation to be filled inside the cavities. Supply and Installation of. Insulation slabs. 2 inch in thickness Rockwool Insulation (48density) with NRC 1.00(high) and S.T.C of 55 Db. Excellent Thermal and Sound Insulation, As safety-wise it is fire proof with melting point above 750 degree, framework having excellent stiffness and recovery “A"" with thermal Resistance > 0.4 Supply and Installation of screwed onto the main structure of the ceiling (2”) panels in order to apply 12mm block board of main primary structure. Air lock with leak-proof clear silicone fill all over the ceiling Structure inner edges The panels with 2"(50MM) thick box panel shall have infill acoustic material density varies from 48kg/m3 (Rockwool as acoustic material). The Material shall have the ability to attain 50% insertion loss and attenuate incident sound energy from frequencies that are concentrated in the 125 to 8000 hertz range to meet the ANSI standards. The external surface having cladded with 0,96/0.93 NCR rated thick fabric &, etc. complete all as specified. Acoustic Treatment: Ceiling Final Finish. By thick fabric for maintain the reverberation.

Soundproof Glass windows: Supply & install for comprising of double Glass 12mm thick with the inside glass being placed at an angle of 45 degrees and secured to a wooden frame work with rubber gaskets and silica gel and covered with a film single side, complete all as specified. We will build with wooden frame install with air tight treatment fill with silica gel stone absorbers complete all as specified.

Soundproof Door Construction of super heavy solid core doors, by adding 1 layers of 18mm commercial board onto one side & 1 layer of 12mm commercial board, Door thickness 60 to 75mm, 2 layer of mlv, down seal and DEE periphery seals locking the door in air-tight seal with a commercial door closer and door handle & door hinges 50 STC rating of the door. including necessary fixing arrangement, fittings SS butt hinges( 4 Nos. 100 mm long) , SS door handles( 250 mm long, 2Nos), locking arrangement, and taking down existing shutter with frame and removing to store complete all as specified and as directed by Engineer-in Charge. Note: Variation in size/qty may involve during execution as per site requirement.

Acoustic Floor Supply & installation for flooring 600x600 mm frame work with 50 mm x50 mm wooden batten fixed in the floor/subfloor, Space between covered with acoustic material over which 18mm thick block board will be laid and outer most being 5mm loop pile carpet overlay and 8mm underlay, complete all as specified.

Taking down Chowkats or frames exceeding 1.5 sqm but not exceeding 4 sqm each (Without taking off shutters from the frame) complete all as specified.

M&L for brick work with sub- class 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified & directed.

M&L for 15mm thick rendering in CM 1:6 on brick or concrete surfaces on walls finished even and smooth without using extra cement complete all as specified.

M&L Rendering 5 mm thick on concrete surfaces in ceilings in cement mortar 1:3 and finished fair and even without using extra cement complete all as specified.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out complete all as specified.

Removal of surplus soil to a distance exc 25 Km & depositing where directed, complete all as specified.

M & L Cement concrete type B2 1:2:4 (40 mm graded aggregate) in foundations, filling and mass-concrete complete all as specified.

M & L for brick work with sub class B bricks old size, straight or curved on plan to any radius in half brick thick walls built in CM 1:4, complete all as specified.

M&L RFR in hard dense soil including spreading, levelling, watering, and well ramming in layers not exceeding 25 cm complete all as specified.

M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate as sub base 100 mm thick finished cement concrete surfaces by broom finish complete all as specified.

M&L for cutting into existing manholes for inserting SWG / RCC pipe upto 150mm dia and making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section ) in cement concrete 1:2:4 type B-I, smooth finished and reforming benching as required, complete all as specified.

S&F 75mm bore cast iron soil waste and vent pipe (sand cast pipes) in any length with or without ears with cement joints laid in floors complete all as specified and directed by Engr-in-Charge

M & L in repairs for Cast iron floor trap of 75 mm outlet plainincluding jointing to waste pipe in run lead fixed in cement mortar complete all as specified and directed by Engr-in-Charge.

S&F cast iron bends,Tee (any radius) diminishing pieces or tapers (larger bore measured) of 75mm bore of pipe fitted with oval access doors complete all as specified and directed by Engr-in-Charge.

S&F 100mm bore cast iron soil waste and vent pipe (sand cast pipes) in any length with or without ears fixed with cement joints laid in floors or in trenches complete all as specified and directed by Engr-in-Charge.

S&F cast iron bends,Tee (any radius) diminishing pieces or tapers (larger bore measured) of 100mm bore of pipe fitted with oval access doors complete all as specified and directed by Engr-in-Charge.

M & L for mild steel TMT bars, 10 mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-S or Fe-410-0 complete all as specified.

All as per item No. 22 above but 6 to 8 mm dia bars complete all as specified.

M&L for RCC (1:11/2:3) type A1 using 20 mm grded aggregate as in footing, foundation, plinth beams complete all as specified.

M&L for RCC (1:11/2:3) type A1 using 20 mm grded aggregate as in slab supported on walls , beams etc complete all as specified.

M&L for RCC (1:11/2:3) type A1 using 20 mm grded aggregate as in columns complete all as specified.

M&L for RCC (1:11/2:3) type A1 using 20 mm grded aggregate as in beams complete all as specified.

M&L for RCC (1:11/2:3) type A1 using 20 mm grded aggregate as in lintels n exc 1.5m span complete all as specified and directed by EIC

M&L for RCC (1:11/2:3) type A1 using 20 mm grded aggregate as in chajjas complete all as specified.

Use and waste of form work to concrete foundations/footings for flat surface finished fair complete all as specified.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) complete all as specified.

Use and waste for form work to soffits and sides of chajjas (horizondal or sloping) complete all as specified.

Use and waste of form work to sides of columns rectangular or square on plain, fair finished complete all as specified.

Use and waste for form work to sides and soffits of beams, fair finished complete all as specified.

M&L for rendering 15 mm thick on brick work or concrete surfaces in cement mortar 1:4 and finished fair and even without using extra cement complete all as specified.

M&L rendering 15 mm thick on brick work or concrete surfaces in cement mortar 1:6 and finished fair and even without using extra cement complete all as specified.

Rendering 10 mm thick on concrete surfaces in ceilings in cement mortar 1:3 and finished fair and even without using extra cement complete all as specified.

M&L for 75 mm thick Cement concrete type C2 1:3:6 (using 40 mm graded stone aggregate) asin plinth protection, paving floors etc complete all as specified.

M & L for glazed ceramic digital coloured tiles 600x300x8 to 9 mm thick in dado/skirting set and jointed in neat cement slurry and pointed in coloured cement to match over 10mm thick rendering in CM 1:4 complete all as specified.

M & L Non skid coloured ceramic tiles 7-8 mm thick (square or rectangular) area of each tiles exc 0.11 sqm but n exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match laid incl over 15mm thick cement screed bed in CM 1:6 set and jointed complete all as specified and directed by Engr-in-Charge

M & L for 20mm thick granite of any type (table rubbed & polished) in jambs, pillars, window cills, plate forms in CM (1:4) including pointing in white cement (1:2) ,using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engr-in-Charge.

Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs.The frame shall be covered with fiber glass from all sides.M.S. stay shall be provided at the bottom to steady the frame., complete all as specified and directed by the manufacturer and Engineer-in-charge.

Supply and fixing to existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete all as specified and directed by the manufacturer and Engineer-in-charge.

S&F 1.5 mm thick section aluminium anodized glazed window shutter, styles & rail 44mm x 44mm including all fittings, such as aluminium handle of size 100mm ,two no aluminium hinges of size 75mmeach ,two no aluminium anodized tower bolts of size 100mm, with each moving leaf complete all as specified.

S & F 4 mm thick Figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 sqm in each pane. (For new and old ventilator) complete all as specified.

S & F 15 mm bore medium grade galvanised steel water tubing with all fittings concealed in wall or floor fixed to wall or laid in floors complete all as specified.

All as per item No-46 here-in-above but bore of pipe 20 mm.

S & F in repair 110 mm dia PVC rainwater pipes etc complete all as specified.

S & F PVC (SWR)bends 110 mm bore any radious complete all as specified.

S & F 100 mm size MS butt hinges medium weight cold rolled fixed/ welded to frame complete all as specified and directed.

S & F 150 mm long, aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 150mm size aluminium handles,cast type,anodised all as directed complete all as specified and directed.

S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium complete all as specified and directed.

S&F 10 liters PVC valve less syphonic action type flushing cistern, low level white with inlet, ball valve, float and handle including bracket and flush pipe to squatt pattern closet including all joints and making good to the floor complete all as specified.

S & F White vitreous china washed down water closet pan, (pedestal pattern), white, with and including P/S trap, PVC solid type seat cover etc complete all as specified.

S & F White vitreous china squatting pan, 'orissa' pattern, water closet of size 580x440mm with integral foot rest, P/S trap etc complete all as specified.

S&F vitreous china urinals,half stall type, flat back, white, with grating and union for discharge pipe, complete all as specified.

M & L Urinal spreader of PTMT any colour for fixing with 15mm dia pipe (Minimum weight 60gms) complete all as specified.

S&F vitreous china urinal partitions white of size 310X700mm, slabs, terminating about 40 cm above floor line, fixed in repairs complete all as specified.

S&F Concussive push button taps of cast copper alloy, screwed for PPR pipe 15mm bore and fixed in repairs complete all as specified.

S&F Door closer, Aluminium (die cast) body,hydraulically regulated, designation No. 3, unversal type suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg complete all as specified.

S&F of vitreous china wash basin, white colour, flat back type, of approx size 580 x 450 mm (for hospital use) including waste coupling, wall bracket, waste pipe of suitable size etc, complete all as specified.

S&F of handshower (health faucet) with 8 mm dia, 1.0 M long flexible tube, wall hook and wall flange made of cast copper alloy, chromium plated fancy type, complete all as specified.

S&F of two way bib cock suitable for 15 mm bore water pipe, with & including wall flange made of cast copper alloy, chromium plated fancy type, complete all as specified.

S&F of 15mm Bib taps, fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed chromium plated, complete all as specified.

S&F fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified.

M&L PVC SWR floor trap 75mm, plain with grating including setting and jointing with silvent cement complete all as specified.

S&F Stainless Steel wall mounted foldable support toilet Garb Baro verall size of 330x75 mm complete all as specified.

S&F Glass wall corner with wall bracket and fixing accessories complete all as specified and as directed.

S&F towel rail 600mm long complete all as specified.

S&F soap dish complete all as specified.

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of oil emulsion distemper over a coat of alkali resistant primer complete all as specified and as directed.

M&L for preparation of newly plastered Ceiling surfaces and providing a layer of 1-2 mm thick wall putty on plaster surfaces of wall preparation to receive plastic emulsion/distemper etc, complete all as directed.

M & L for preparation of newly plastered wall surfaces, over 10cm girth, applying two coats of weather resistant emlusion exterior grade over a coat of exterior wall primer complete all as specified and as per manufacturer's instruction complete all as specified.

Supply only integral water proofing compound complete all as specified.

Removing debris exc. 1.50 Km but n exc. 15 Km and depositing where directed, in soil complete all as specified.

Taking down old unserviceable point wiring with and including existing conduit / batten type (light, fan, socket or power point) complete such as switches, ceiling rose, pendent holder, regulator and socket etc and removing the material from site with chasing and cutting surface of wall / floor/ ceiling etc complete all as specified.

Taking down existing sub main wiring aluminium/copper 4/6/10 sqmm complete all as specified.

M&L for point wiring concealed type with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable connected to common earth and earth dolly with suitable copper lugs drawing into and including rigid non-metallic PVC concealed conduit of 20mm dia or higher, medium grade complete with all PVC conduit accessories, GI metal flush box of 1.60 mm thick suitable for modular/conventional switches/sockets/fan regulators with cover plates, blanking plates, brass screws, cup washers etc including all cutting / chases etc in walls complete all as specified and directed for One light point/ceiling fan/exhaust fan point controlled by one switch :- Note - All accessories likes modular top cover plate/ hylum sheet cover plate, Metal flush box, screws etc as applicable will be included in quoted rates.

All as per srl item No. 80 here-in-before but One socket outlet 5 Amps controlled by one switch on same board

All as per srl item No. 80 here-in-before but One socket outlet 5 amps controlled by one switch on independent board

All as per srl item No. 80 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for 15 Amp power point.

Material and labour for Sub main wiring with 2 run of 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in and including PVC conduit with wall thickness 1.6mm thick and including 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB/Panel to sub DB complete all as specified. Note : 1. The two run of 6 Sqmm wire, one run of 6 Sqmm wire and 1 mtr PVC conduit pipe will be measured as one unit.

S&F modular switch, 06 Amps, single pole, one way, 250 volts, one module and IP 20 protection complete all as specified & directed

S&F modular switch, with indicator, 16 Amps, single pole, one way, 250 volts, one module complete all as specified & directed

S&F modular socket outlet 05 Pin, 06 Amps, 02 module with shutter complete all as specified & directed

S&F modular socket outlet 02 in 01, 03 pin, 06 Amps and 16 Amps, 02 module with shutter complete all as specified & directed

S&F ceiling fan regulator, stepped type of 0 to 04 rotary steps, electronic, 02 module, humfree, AC, 230 volts, 100 watts, duly ISI marked complete all as specified.

Supply and fix Ceiling rose, insulated body, 3 terminal, 240 volts, 5 Amps with and making good surface as original by plastering and whitewash/ colour/ distemper etc complete all as specified.

Taking down DBs of any size complete including MCBs complete all as specified.

Supply and fix Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 8 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc and making all necessary connections complete all as specified.

All as srl item no 93 here in before but of SPN 04 way type.

M&L MCB SP in replacement 6 to 32 Amp, B Curve type, 10kA, single pole with over load and short circuit protection complete all as specified.

Supply and fixing in replacement MCB, SPN type of 40 to 63 amps capacity, 240V, 10 KA with all connections complete all as specified.

S&F in replacement LED tube light fitting 20 watt (CW) , 4 feet long in extruded aluminium batten with high efficient LEDs available in milky diffuser and Color Rendering Index (CRI>70), IP20, correlated Color Temparature (CCT- 5700K to 6500K) , PF>0.9 and Voltage rated 220V to 240V complete all as specified.

Material and labour for Sub main wiring with 2 run of 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in and including PVC conduit with wall thickness 1.6mm thick and including 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB/Panel to sub DB complete all as specified. Note : 1. The two run of 4 Sqmm wire, one run of 4 Sqmm wire and 1 mtr PVC conduit pipe will be measured as one unit.

Supply and fix in replacement of MCB protected modular AC/Geyser box complete with and including 6 pin socket, plug top, modular cover plate, mini MCB SP 20 Amp capacity and PVC gang box etc, complete all as specified and directed by by Engineer-in charge.

M&L MCB SP 6 to 32 Amp, B Curve type, 10kA, single pole with over load and short circuit protection complete all as specified.

Supply and fixing MCB, SPN type of 40 to 63 amps capacity, 240V, 10 KA with all connections complete all as specified.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified.

S&F in replacement tube light fitting 10 watt (CW), 2 feet long in extruded polycarbonate batten with high efficient LEDs available in clear & milky diffuser, PF>0.9 and Voltage rated 220V to 240V complete all as specified.

Shivam Firetech Engineers

ACR ENTERPRISES