Shelter for Urban Homeless MC Una SH Construction of common toilet for Rehan Basera

Amount

Excavation in foundation, trenches etc., in earth work, up to all leads and lifts stacking the excavated soil not more than 3 metres clear from the edge of excavation and then returning the stacked earth when required into plinths sides of foundations etc., consolidating each deposited layer by ramming and watering and disposing off all surplus excavated earth as directed with in all lead and in all kinds of soils.

Providing and laying cement concrete 1:6:12 (1 cement :6 sand :12 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in : Foundation and plinth :

Brick work using common burnt clay building bricks in foundation and plinth in : Cement mortar 1 : 6 (1 cement : 6 sand ) Ist class bricks.

Providing form work with steel plates 3.15 mm thick welded with steel plates 3.15 mm thick welded with angle iron in frame 30 X 30 X 5 mm. so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4metres and removal of the same for insitu-reinforced concrete and plain concrete work in: Flat surfaces such as soffits of suspended floors, roofs, landing and the like.

Beams, cantilevers, girders and lintels. Sides and soffits of beams, beam haunchings, catilevers, bressumers and lintels not exceeding 1 metre in depth in all heights from floor.

Column, pillars, posts and struts. Square rectangular or polygonal in plan.

Providing mild steel /tor steel reinforcement for R.C.C. work including bending binding and placing in position complete upto floor two level: Tor steel.

Providing and laying cement concrete work 1 : 2 : 4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in : Suspended floor roofs, landing and shelves and their support balconies, beams, girders, bressumers and cantilevers upto floor two level.

Column, pillars, posts and struts upto floor two level.

6mm cement plaster to ceiling: In cement mortar 1:3 (1 cement : 3 sand)

15mm cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles, chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth : In cement mortar 1:5 (1 cement : 5 sand)

20mm cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth : In cement mortar 1:5 (1 cement : 5 sand)

Cement concrete flooring 1 : 2 : 4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) laid in one layer finished with a floating coat of neat cement 50 mm thick.

Providing and fixing 10mm thick anti skid water proof stain and impact resistent heavy duty vetrified tiles Nitco or equivalent 600x600mmx10mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete.

Providing and laying Duro stone vetrified tiles (300x300mmx8mm) in grey/coloured of required shade in skirting risers of steps and dados on 12mm thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete.

Providing and fixing anodised aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/paneling C.P. brass/stainless steel screws. All complete as per architectural drawings and the directions of Engineer-In-Charge. For doors windows and ventilatiors and glazed partitions frames.

Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete.

Providing and fixing vitreous china water closet squatting pan ( Indian type W.C. pan) size 580 mm (earth work, bed concrete, foot rest and trap to be measured and paid for separately : Orissa pattern

Providing and fixing 100 mm size ‘P’ or ‘S’ trap for water closet ( squatting pan ) including jointing the trap with pan and soil pipe in cement mortar 1:1 (1cement :1 sand ) Vitreous cina

Providing and fixing 10.0/12.50/15.00 litres PVC low level flushing cistern with a pair of C.I. or mild steel brackets complete with fitting such as lead valve less siphon, 15 mm nominal size brass valve with polythene float, CP brass handle unions and couplings for connection with inlet, out let and over flow pipe, 40mm dia. PVC flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet ( overflow pipe to be measured and paid for separately).

Providing and fixing vitreous china bowl pattern urinal including connection with the urinal with waste pipe by means of white lead mixed with chopped hemp ( waste pipe to be measured and paid for separately) : Flat back type of size 430 mm X 260 mm X 350 mm

Providing and fixing automatic flushing cistern with a pair of CI or MS brackets complete with fittings including CI symphonic apparatus, mosquito proof lid, CP brass unions and coupling for connections with inlet out let and over flow pipe including cutting holes and making good the same (over flow pipe to be measured and paid for separately) : PVC 5 litres capacity.

Providing and fixing PVC waste pipe for wash basin 32 mm dia.

Providing and fixing vitreous china wash basin with single hole for pillar tap with CI or MS brackets painted white including cutting holes and making good the same but excluding fittings : Flat Back 550 mm X 400 mm

Providing and fixing 600 mm X 450 mm beveled edge mirror of superior glass mounted on 6 mm thick AC sheet or ply wood sheet and fixed to wooden plugs with Cp brass screws and washers.

Providing and fixing CP brass bib tap (superior or heavy type ) 15 mm dia.

Providing and fixing CP brass pillar tap with capstan head : 15 mm dia.

Providing and fixing CP brass angle valve : 15 mm dia.

Providing and fixing PVC connection pipe with brass unions: 300mm length 15 mm nominal.

Providing and fixing brass full way valve with wheel : 15 mm nominal bore

Providing and fixing MI union for wash basin 32mm dia.

Providing and fixing to wall ceiling and floor GI pipe 15mm nominal dia with accessories. B class

Providing and fixing PVC pipe 4.50 kg /cm2 pressure 100 mm dia.

Providing and fixing PVC pipe 4.50 kg /cm2 pressure 75 mm dia.

Providing and fixing PVC water storage tank 500 lts. Capacity. SINTEX

Providing and fixing PVC floor trap 75mm dia.

Providing and fixing CP Jali 75mm

Sahil Choudhary

MAHESH ANGRA

sachin ohri govt contractor

RAKESH SINGH