PROVISION OF OTM ACCOMMODATION (PH-I) AT LOHITPUR

Amount

Grubbing up tree trunk of girth exc 30cm and n exc. 100 cm including cutting of trunk portion protruding over ground, digging out roots, filling holes and leveling off ground, stacking of serviceable material and removing of unserviceable material to a distance n exc. 50 m and clearing site(Dudlali, Paspathe, Halak, T-Siris, Shimal, Conckal, Phaledha, Muretu, Bange, Badatat, Muleta, Khokan, Lalepuma, Retha, Parare, Chepale, Lapse, Bagena, Dabdae, Mekai etc) complete all as specified and directed.

Grubbing up tree trunk of girth exc 100cm and n exc. 150 cm including cutting of trunk portion protruding over ground, digging out roots, filling holes and leveling off ground, stacking of serviceable material and removing of unserviceable material to a distance n exc. 50 m and clearing site(Dudlali, Paspathe, Halak, T-Siris, Shimal, Conckal, Phaledha, Muretu, Bange, Badatat, Muleta, Khokan, Lalepuma, Retha, Parare, Chepale, Lapse, Bagena, Dabdae, Mekai etc) complete all as specified and directed.

Grubbing up tree trunk exc of girth 150cm and n exc. 200 cm including cutting of trunk portion protruding over ground, digging out roots, filling holes and leveling off ground, stacking of serviceable material and removing of unserviceable material to a distance n exc. 50 m and clearing site(Dudlali, Paspathe, Halak, T-Siris, Shimal, Conckal, Phaledha, Muretu, Bange, Badatat, Muleta, Khokan, Lalepuma, Retha, Parare, Chepale, Lapse, Bagena, Dabdae, Mekai etc) complete all as specified and directed.

Grubbing up tree trunk of girth exc 200cm and n exc. 250 cm including cutting of trunk portion protruding over ground, digging out roots, filling holes and leveling off ground, stacking of serviceable material and removing of unserviceable material to a distance n exc. 50 m and clearing site(Dudlali, Paspathe, Halak, T-Siris, Shimal, Conckal, Phaledha, Muretu, Bange, Badatat, Muleta, Khokan, Lalepuma, Retha, Parare, Chepale, Lapse, Bagena, Dabdae, Mekai etc) complete all as specified and directed.

Grubbing up tree trunk of girth exc 250cm and n exc. 300 cm including cutting of trunk portion protruding over ground, digging out roots, filling holes and leveling off ground, stacking of serviceable material and removing of unserviceable material to a distance n exc. 50 m and clearing site(Dudlali, Paspathe, Halak, T-Siris, Shimal, Conckal, Phaledha, Muretu, Bange, Badatat, Muleta, Khokan, Lalepuma, Retha, Parare, Chepale, Lapse, Bagena, Dabdae, Mekai etc) complete all as specified and directed.

Surface excavation in soft/loose soil n exc 30 cm deep and averaging 15 cm deep and getting out complete all as specified and directed.

Surface dressing n exc 15cm deep in soft/loose soil complete all as specified and directed.

Surface dressing n exc 15cm deep in hard/dense soil complete all as specified and directed.

Rough excavation n exc 1.5m deep and getting out in hard/dense soil complete all as specified and directed.

Rough excavation n exc 1.5 m deep in soft/ loose soil and getting out complete all as specified and directed.

Excavation over areas not exc 1.5m deep and getting out in soft and loose soil complete all as specified and directed.

Excavation over areas not exc 1.5m deep and getting out in hard/dense soil complete all as specified and directed..

Add to item No 12 for each additional 1.5m or part thereof beyond 1.5m in hard/dense soil complete all as specified and directed

Excavation over areas exc 1.5m but not exc 3.0m deep in soft and loose soil

Add to item No 14 for each additional 1.5m or part thereof beyond 3.0m in loose/soft soil complete all as specified and directed

Earth work in excavation by mechanical means (Hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-incharge

Excavation in trenches n exc 1.5 m wide n exc 1.5 m deep in soft/ loose soil for foundation etc or for shaft, wells, manholes etc n exc 10 sqm on plan and not exc 1.5 m in depth and getting out complete all as specified and directed.

Excavation in trenches n exc 1.5 m wide , exc 1.5 m deep but n exc 3.00 m deep in soft/ loose soil for foundation etc or for shaft, wells, manholes etc n exc 10 sqm on plan and exc 1.5 m deep but n exc 3.00 m deep and getting out complete all as specified and directed.

Excavation in trenches n exc 1.5 m wide n exc 1.5 m deep in hard/dense soil for foundation etc or for shaft, wells, manholes etc n exc 10 sqm on plan and not exc 1.5 m in depth and getting out complete all as specified and directed.

Excavation in trenches n exc 1.5 m wide , exc 1.5 m deep but n exc 3.00 m deep in hard/dense soil for foundation etc or for shaft, wells, manholes etc n exc 10 sqm on plan and exc 1.5 m deep but n exc 3.00 m deep and getting out complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed

Returning ,filling in including spreading ,levelling watering and well ramming in soft/loose soil in layers n exc 25 cm thick complete all as specified and directed

M&L for earth filling under floors including spreading, levelling and watering and well ramming complete all as specified and directed. Note: Earth obtained from excavation shall be re-used under this item.

M&L for sand filling under floors or in foundation including spreading, levelling watering and well ramming in layers complete all as specified and directed.

Supply and spreading sand cushioning for under ground cable protection with dry fine river sand complete all as specified and directed. Note: Punned thickness shall be measured and paid.

Material and labour for filling of coarse sand as in filter media along Retaining wall complete all as specified and directed

Forming embankments including raising or lowering earth spreading in layers not exc 30 cm thick watering ,ramming and rolling and finished to required size and shape etc n exc 1.5 m high from base by using soil complete all as specified and directed

Forming embankments including raising or lowering earth spreading in layers not exc 30 cm thick watering ,ramming and rolling and finished to required size and shape etc exc 1.5 m high and not exc 3.00 from base by using soil complete all as specified and directed

Forming embankments including raising or lowering earth spreading in layers not exc 30 cm thick watering ,ramming and rolling and finished to required size and shape etc exc 3.00 m high and not exc 4.50 from base by using soil complete all as specified and directed

Forming embankments including raising or lowering earth spreading in layers not exc 30 cm thick watering ,ramming and rolling and finished to required size and shape etc exc 4.5m high and not exc 6.00 from base by using soil complete all as specified and directed

Forming embankments including raising or lowering earth spreading in layers not exc 30 cm thick watering ,ramming and rolling and finished to required size and shape etc exc 6.0m high and not exc 7.50 from base by using soil complete all as specified and directed

Forming embankments including raising or lowering earth spreading in layers not exc 30 cm thick watering ,ramming and rolling and finished to required size and shape etc exc 7.5m high and not exc 9.00 from base by using soil complete all as specified and directed

Removing excavated soil not exceeding 50 m distance and depositing where directed at a level n exc 1.5 metre above the starting point complete all as specified and directed .

Removing excavated soil exc 50 m and n. Exc 250 m and depositing where directed at a level n. exc 1.50 m above the starting point complete all as specified and directed .

Removing excavated soil exc 250 m and n. Exc 500 m and depositing where directed at al level n. exc 1.50 m above the starting point complete all as specified and directed .

Add to item No 35 for each additional 500m or part thereof beyond 500m and upto a total distance of 1.5km. complete all as specified and directed

M&L for hardcore of broken stones of gauge n exc 63 mm , deposited, spread and levelled in layers n exc 15 cm thick watered and rolled/ rammed to a true surface complete all as specified and directed.

M&L hardcore of broken stones of gauge exc 63 mm but n exc 100mm , deposited spread and levelled in layers n exc 15 cm thick watered and rolled/ rammed to a true surface complete all as specified and directed

M&L for treating the bottom and sides of excavation with anti termite treatment at the rate of 5 litres of emulsion per sqm of surface area complete all as specified and directed

M&L for treating the back fill in contact with foundation with anti termite treatment at the rate of 7.5 litres of emulsion per sqm of vertical surface complete all as specified and directed.

M&L for treating the top surface of filled earth with anti termite treatment at the rate of 5 litres of emulsion per sqm of surface area all as specified complete all as specified and directed

M&L for treating the soil alongwith external perimeter of the building with anti termite treatment at the rate of 2.25 litres of emulsion per meter of the perimeter wall all as specified complete all as specified and directed

M& L Cement concrete 1:4:8 Type D 2 (using 40 mm graded stone aggregate) ,in foundations, filling and mass concrete complete all as specified and directed

M& L Cement concrete 1:3:6 Type C-2 (using 40 mm graded stone aggregate) as in kerb stone, copings complete all as specified and directed

M& L Cement concrete 1:2:4 Type B 2 (using 40 mm graded stone aggregate) ,as in foundations, filling and mass concrete complete all as specified and directed

Cement concrete 1:2:4 Type B 2 (using 40 mm graded stone aggregate) as in suface channels and drains complete all as specified and directed

Cement concrete 1:3:6 Type C 2 (using 40 mm graded stone aggregate) as in suface channels and drains complete all as specified and directed

Providing cement concrete 1:2:4 Type B-1 (using 20 mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, including weathering, slightly rounded or chamfered angles and throating, as directedcomplete all as specified and directed

Providing cement concrete 1:3:6 Type C 1 (using 20 mm graded stone aggregate) as in, cills, steps; seismic and other similar bands, plinth courses, copings and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed

Providing Precast RCC M-25 (Design Mix ) using 20mm graded stone aggregate as in dunnage block of size 0.30M x 0.30M x 0.20M, set in CM 1:6 complete all as specified and directed. Note: Reinforcement shall be measured and paid separately.

Providing, precast M-20 cement concrete in manhole cover slab (for use with masonry), with plain fair faces, including chamfers weatherings, throating etc. and setting in mortar complete with joints to match complete all as specified and directed. Note: Reinforcement shall be measured and paid separately.

Providing, precast cement concrete type B-1 (1:2:4) (using 20mm graded stone aggregate) in manhole cover slab set in cement mortar 1:4 complete all as specified and directed. Note: Reinforcement shall be measured and paid separately.

Reinforced cement concrete design mix M-25 (using 20 mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed

Reinforced cement concrete design mix M-30 (using 20 mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed

Reinforced cement concrete design mix M-20 (using 20 mm graded stone aggregate) as in walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed

Reinforced cement concrete design mix M-25 (using 20 mm graded stone aggregate) as in walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed.

Reinforced cement concrete design mix M-30 (using 20 mm graded stone aggregate) as in walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed.

Reinforced cement concrete design mix M-25 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like

Reinforced cement concrete design mix M-30 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed

Reinforced Cement Concrete M-25 (Design mix) using 20 mm graded stone aggregate as in chajja complete all as specified and directed

Reinforced cement concrete design mix M-25 (using 20 mm graded stone aggregate)as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed

Reinforced cement concrete design mix M-25 (using 20 mm graded stone aggregate)as in columns, pillars, piers, posts and struts complete all as specified and directed

M&L for precast RCC M-25 (Desig Mix) (using 20 mm graded stone aggregate)as in wall panel jointing with other panels with cement mortar 1:3 and finished etc complete all as specified and directed. Note: Reinforcement shall be measured and paid separately.

M&L for precast cement concrete louvers and jallies 40mm thick 1:2:4 type B0 (using 12.5 mm graded stone aggregate) set in CM 1:6 complete all as specified and directed

Extra for forming fair finished drain or channel 30CM inner girth in cement concrete using extra cement, including forms, moulds, mitred/ stopped ends etc. complete all as specified and directed

Supply only Integral Water Proofing Compound

M &L Brickwork with subclass 'B' old size bricks, straight or curved on plan exc 6m mean radius built in Cement mortar 1:6 complete all as specified and directed

M &L Brickwork with subclass 'B' old size bricks, straight or curved on plan exc 6m mean radius built in Cement mortar 1:4 complete all as specified and directed

M&L Brickwork with subclass 'B' bricks, old size brick straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed

M&L 40 mm thick Damp proof course to horizontal or vertical surfaces including necessary formwork in cement concrete 1:2:4 Type B 0 using (12.5 mm graded stone aggregate) complete all as specified and directed

M&L Firebrick work in linings to fire places, flues etc. (other than in chimney shafts) , set, jointed and pointed in fireclay complete all as specified and directed

M&L Continuous brick edging; using sub class 'B' brick (old size) with width equal to the width of the brick; laid dry on end vertically complete all as specified and directed

M&L for boulder filling dry, handpacked tightly, as in wire crate apron bunds (wire crate measured separately) complete all as specified and directed

S&F 4mm dia galvanised steel wire, 150x100mm mesh, made up into mattresses or cages, lapped, wired and laid in position, including closing after filling complete all as specified and directed

M&L Boulder pitching, laid dry, hand packed tightly complete all as specified and directed

M&L 25mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; rough finished surfaces of concrete flat complete all as specified and directed

Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter finished flat surfaces complete all as specified and directed

Formwork to soffits of suspended slabs such as roof slab , floor slabs , landing ; and similar work not exc 200mm (horizontal or sloping) thick; rough finished surfaces of concrete flat complete all as specified and directed

Formwork to chullah hoods, chajjas, troughs and similar items including edges, rough finished surfaces of concrete flat complete all as specified and directed

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc rough finished surfaces of concrete flat complete all as specified and directed

Formwork to sides of walls rough finished surfaces of concrete flat complete all as specified and directed

Formwork to sides of square ,rectangular or polygonal pillars, posts, struts, piers, columns and stanchions rough finished surfaces of concrete flat complete all as specified and directed

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide ,rough finished surfaces of concrete complete all as specified and directed

S&F 40mm thick flush shutters, solid core construction, with block board core and plywood face panels, both face is covered with decorative faces veneer with lipping/frame to match, complete all as specified and directed

S&F 2nd class HW small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours; articles n exc 200 cu.cm each complete all as specified and directed

S&F Solid PVC Double door frame of size 50mm x 95mm made out of 5mm Plain colour PVC sheet reinforced with M.S tube, supplying & fixing in opening complete all as specified and as shown in drawing

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2,4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face with particle board core supplying & fixing in frame as per specification and drawing and directed.

S&F 200 mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed, complete all as specified and as directed

S&F 150 mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed, complete all as specified and directed

S&F 150mm long aluminium anodised barrel tower bolts of extruded section, complete all as specified and directed

S&F 300mm long mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed,complete all as specified and directed

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed.complete all as specified and directed

S&F Butt hinges of 100 mm size, medium weight, cold rolled mild steel and fixed, complete all as specified and directed

S&F 150mm mild steel pressed handles, oval type, stove enamelled black, complete all as specified and directed

S&F 125mm extruded aluminium alloy handles, fabricated type., anodised complete all as specified and directed

S&F tubular towel rail, 20mm dia, brass chromium plated, D type, 60cm long between flanges including brackets complete all as specified and directed

Supply and fix galvanised mild steel wire cloth of 0.56mm nominal dia of wire and average width of aperture and 1.18mm and fixed to angle iron frame with tinned faces or galvanised wire staples complete all as specified and directed

M&L Cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles complete all as specified and directed

M&L 1.25mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed

S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed

S&F framed work such as grills gratings, etc., with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed baluster; walk ways; railings; framed work or water tanks and similar work conforming to Fe 290 gde E 165 complete all as specified and directed

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed

M&L Mild steel TMT bars of Grade 500D 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L Mild steel TMT bars of Grade 500D 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Mild steel TMT bars of Grade 500D 5mm dia and over upto and including 10mm dia cut to length, bent to shape required in stirrups, spacers and binders and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed

Mild steel TMT bars of Grade 500D 10mm dia and over cut to length, bent to shape required in stirrups, spacers and binders and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed

S&F Joist, channel, angle, or tee sections fixed independentaly, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming to grade Fe-410-w or E -250 quality A complete all as specified and directed

M&L for mild steel anchor plate of any size and any thickness including welding to pipe complete all as specified and directed

S&F rolled mild steel as in Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to grade Fe-410-w or E -250 quality A complete all as specified and directed

S&F rolled mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming to grade Fe-410-w or E -250 quality A complete all as specified and directed

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hanging; also fastening conforming to grade Fe-410-W or E -250 quality A complete all as specified and directed

S&F Welded Steel Wire Fabric to wood or steel member not exc 4Kg per Sqm complete all as specified and directed

Fixing only PVC coated chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed

S&F Galvanised 2 strand steel barbed wire 2.24mm dia PVC coated steel barbed wire with 2mm dia barbs at 75mm spacing & straining & fixing to any type of standard rails straining bolt including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc.etc as directed (each line wire to be measured) complete all as specified and directed

M&L for providing and fixing 610mm hot dip Razor Concertina Coil fencing including required clips, pins etc as per specification fixed on the Y angle. Each concertina coil shall be fixed to MS angle with existing rows of barbed wire, on each Y angle. There shall be 80 circles in each 09 mtr length, no of clips in each 09 mtr-200Nos, central core wire 12 SWG hot galvanized hight stenciled wire, unit-145-160 kg/sqmm, razor strip-0.5mm thick hot dipped galvanized and lengh 19mm, clips 1.5mm thick made of SS AISI 410 all complete all as specified and directed. Note: Payment shall be made on length of security wall/fencing, not actual length of concertina coil

S&F 150mm high brass letter having width and depth not less than 20mm and thickness min 1mm with drilling and fixing in wall complete all as specified and directed by Engr-in Charge.

Supply and fixing Pressed Steel Windows/Ventilator using box type hinges, MS Spring Latch, MS tower Bolt and telescopic stay complete all as shown in drawing No CESZ/2015/TD/006 Sheet 1/3 to 3/3 dated 05 Jan 2015 and specified

S&F pressed steel frames for doors of size 105x60 mm, 1.6mm thick with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified,

S&F Mild steel in flat, round or square bars, in available lengths Fe 410-W (Gde E-250) quality A complete all as specified and directed

Supply only PVC coated chain link MS galvanised fencing, any size or type (size of mesh 100x100mm & 4mm dia.) complete all as specified and directed

S&F 8mm thick clip of Mild Steel around the pole to hold the pully duly finished with primer & paint complete all as specified and directed

S&F Galvanised, corrugated mild steel sheeting 0.63 mm thick with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275. complete all as specified and directed

S&F Galvanised, corrugated mild steel sheeting 0.8 mm thick with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275. complete all as specified and directed

M&L for 100mm thick PCC M20 Design Mix (using 40mm graded stone aggregate) mixed with non metallic floor hardener as in floor finished by vacuum dewatering including supply of non metallic floor hardener as per manufacturers instruction complete all as specified and directed

M&L for 200mm thick PCC M20 Design Mix (using 40mm graded stone aggregate) mixed with non metallic floor hardener finished by vacuum dewatering including supply of non metallic floor hardener as per manufacturers instruction complete all as specified and directed

M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed

M&L 100mm thick cement concrete type B-2 1:2:4 (using 40mm graded stone aggregate) laid in panels over hardcore including spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and directed

M&L for 100mm thick PCC M15 (using 40mm graded stone aggregate) with chequered finish as in floor complete all as specified and directed

M&L 50mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in drain bed complete all as specified and directed

M&L 80mm thick Cement concrete type B-2, 1:2:4 (40mm graded aggregate) as in drain walls complete all as specified and directed

M&L for 50mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in floor/plinth protection , finish even & smooth without using extra cement complete all as specified and directed

M&L for 100mm thick cement concrete 1:3:6 type-C2(using 40mm graded stone aggregate) as in floor finished even and smooth without extra cement complete all as specified and directed

M&L 75mm thick PCC 1:5:10 type E-2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed

M&L 40mm thick PCC (1:2:4) type B1(using 20mm graded stone aggregate) finish even and smooth using and including glass dividing strip over 75 mm thick PCC 1:5:10 type E2 over 75mm sand layer covering with polythene film over rammed earth complete all as specified and directed

M&L for 100mm thick PCC 1:4:8 type D-2(using 40mm graded stone aggregate) as in sub base complete all as specified and directed

M&L 25 mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) finished even & smooth using and including glass dividing strip over RCC slab complete all as specified and directed

M&L 30mm thick PCC(1:2:4) type B-0 (using 12.5mm graded stone aggregate)as in coping complete all as specified and directed

M&L 30mm thick PCC(1:2:4) type B-1 (using 20mm graded stone aggregate)as in coping complete all as specified and directed

M&L 50mm thick PCC(1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in coping complete all as specified and directed

M&L 150 mm thick PCC (1:2:4) type B2 (using 40mm graded stone aggregate), trimixed concrete over 100 mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate)over 100 mm thick hardcore over rammed earth, top layer shall be wear resistance using metallic hardner and provision of copper strip of size 50mmx3mm thick in panel of size 3.00mx4.00m, copper strip to be connected to earth lead complete all as specified and directed

M&L for 100mm Thick PCC M15 (using 40mm graded stone aggregate) nominal Mix as in sub base to floor complete all as specified and directed

M&L 75mm thick PCC (1:2:4) type B-2 (using 40mm graded stone aggregate) as in floor complete all as specified and directed

M&L for 15mm thick Wearproof topping as specified (incorporating an approved metallic floor hardner), laid on concrete floors and pavings, and finished even and smooth complete all as specified and directed. Note: Metallic hardner shall be measured and paid separately under relevant item.

M&L for 40mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate), as in floor finish even & smooth without using extra cement complete all as specified and directed

M&L for rendering 5 mm thick in CM 1:3 over 10mm thick CM 1:6 as in skirting complete all as specified and directed

M&L for rendering 5 mm thick in CM 1:3 over 10mm thick CM 1:3 as in skirting complete all as specified and directed

S&F glass dividing strips 38mm wide and 3mm thick as in floor complete all as specified and directed

M&L colured Glazed ceramic tiles in vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick screed bed in CM 1:3 complete all as specified and directed

M&L colured Glazed ceramic tiles in vertical surface 600x 600x 9-10 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick screed bed in CM 1:3 complete all as specified and directed

M&L colured Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1: 6 over 25mm thick PCC 1:2:4 type BO over 75 mm thick PCC 1:4:8 type D2 over 75 mm thick sand layer covering with polythene film over rammed earth complete all as specified and directed

M&L colured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM. 1:6 over 25 mm thick PCC 1: 2:4 type B0 over 75 mm thick PCC 1:5:10 type E2 over 75 mm thick sand layer covering with polythene film over rammed earth complete all as specified and directed

Supplied and fixed 600x600x9 to 10 mm thick vitrified floor tiles (light shade) over 15mm thick screed bed CM 1 : 6 over 25 mm thick PCC 1:2:4 type BO over 75 mm thick PCC 1:4:8 type D2 over 75 mm thick sand layer covering with polythene film over rammed earth complete all as specified and directed

Supplied and fixed colured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Supplied and fixed Vitrified Ceramic tiles (light shade )10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match on vertical surfaces such as skirtings, dados and risers to steps etc.complete all as specified and directed

S&F Polythene film 50 micron laid in floor complete all as specified and directed

Supply and laying 200 micron polythene film under floor in two layers as specified and directed. Note: Both the layers shall be measured and paid as one unit.

Supply and laying 200 micron polythene film under floor as specified and directed

Supply only sodium silicate, density 84 degrees twaddell (specific gravity 1.42) complete all as specified and directed

Supply only metallic floor hardener complete all as specified and directed

S& F Plastic dividing strips 98 x 1.5 mm laid and fixed in floors 2m x 2m grid complete all as specified and directed

M&L for rendering 10 mm thick in cement mortar 1:3 on fair faces of brick work or concrete surface, finished fair and even complete all as specified and directed.

M&L for 10 mm thick rendering in cement mortar 1:4 mixed with water proofing compound on fair faces of brick work or concrete surface, finished fair and even complete all as specified and directed. Note: WPC shall be measured and paid separately.

M&L for 10 mm thick rendering in cement mortar 1:4 mixed with water proofing compound over 10mm thick rendering in CM 1:4 on other than fair faces of brick work or concrete surface, finished fair and even complete all as specified and directed. Note: WPC shall be measured and paid separately.

M&L for 10 mm thick rendering in cement mortar 1:4 mixed with water proofing compound over 10mm thick rendering in CM 1:6 on fair faces of brick work or concrete surface, finished fair and even complete all as specified and directed. Note: WPC shall be measured and paid separately.

M&L for rendering 15 mm thick in cement mortar 1:6 on other than fair faces of brick work or concrete surface of walls finished even and fair complete all as specified and directed

M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surface of walls finished even and smooth without using extra cement complete all as specified and directed

M&L for rendering 15 mm thick in cement mortar 1:4 in two layers (10+5mm)on fair faces of brick work or concrete surface of walls with top layer mixed with water proofing compound and finished even and smooth and without using extra cement complete all as specified and directed. Note: WPC shall be measured and paid separately.

M&L for rendering 5 mm thick in cement mortar 1:3 on fair faces of concrete surface of walls, finished fair and even complete all as specified and directed

M&L for rendering 5 mm thick in cement mortar 1:3 on fair faces of ceiling of concrete surface, finished fair and even complete all as specified and directed

M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished fair and even complete all as specified and directed

Screed bed or bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes complete all as specified and directed

M&L for 5 mm thick rendering in cement mortar 1:3 over 10mm thick rendering in CM 1:6 on fair faces of brick work or concrete surface, finished even and smooth using extra cement complete all as specified and directed

M&L for 5 mm thick rendering in cement mortar 1:4 mixed with water proofing compound over 10mm thick rendering in CM 1:6 on fair faces of brick work or concrete surface, finished fair and even complete all as specified and directed. Note: WPC shall be measured and paid separately.

M&L Raised pointing to random or polygonal rubble, uncoursed or brought upto courses in cement mortart 1:4 complete all as specified and directed

M&L for preparing new plastered surfaces and applying two coats of colour wash over a coat of white wash on walls complete all as specified and directed

M&L for preparing the new plastered surfaces and applying three coats white wash on walls complete all as specified and directed

Material and labour for Two Coats of Cement Base Paint over a coat of primer in camoflauge pattern including preparation of newly plastered surfaces complete all as specified and directed

M&L for preparing the new plastered surfaces and applying two coats of oil bound distemper on walls all as specified and directed.

M&L for preparing the new plastered surfaces and applying two coats of Exterior emulsion paint over a coat of alkali resistant priming paint on walls as specified and directed.

M&L for preparing the new plastered surfaces and applying two coats of weather proof acrylic based exterior emulsion paint on walls in camoflauge pattern over a coat of acrylic primer complete as specified and directed. Note: Colour combination and design pattern shall be approved by GE.

Preparation of new surfaces and applying 3 coats white wash on ceiling surfaces complete all as specified and directed

M&L 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed

M&L 4 mm thick frosted glass, and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed

Material and Labour for two coats of fire retardant paint over a coat of red oxide primer to steel surfaces of doors complete all as specified and directed

M&L for preparing the new plastered surfaces and applying two coat of FIRE RETARDANT PAINT over a coat of priming paint on ceiling, complete all as specified and directed

Painting 2 coats of synthetic enamel paint on steel and iron surfaces of any description over 10 cm in width or girth including preparation and one coat of red oxide primer complete all as specified and directed

Material and Labour for 2 coats fire retardant paint over a coat of priming paint to walls including preparation of newly plastered surfaces.complete all as specified and directed

M&L for preparing new steel surface n.exc 10cm in width or girth and apply two coat of synthetic enamel paint over a coat of redoxide zinc chrome primer complete all as specified and directed

M&L for preparing the new surfaces of roof and applying two coats of eco friendly, heat reflective and insulation cool coating, with solar reflective index (SRI) value greater than 120, cools at least upto 20 degrees on surface and between 4-8 degrees inside, heat resistant upto 125 degrees and water resistant as well as per manufacturer instruction . Tested by NABL certified lab as per ASTM/LEEDS for green building complete all as specified and directed.

Preparing ,cleaning new concrete/plastered surface and providing APP based polymeric membrane minimum 3mm thick of weight not less than 3.6 Kg per Sqm re-inforced with polyester non-woven fabric over a coat of bitumen primer @ 0.30 liter/sqm and sealed with torch application and finish the surface with aluminium paint at top @ 0.2 kg/sqm as per manufacturer's instructions complete all as specified and directed.

Supplied and fixed 110mm dia PVC(SWR) pipes single soketed in any length with rubber ring jointed fixed to wall complete all as specified

M&L for reinforced concrete pipe, 600mm bore class NP-2 laid and jointed with collars complete all as specified and directed

M & L for Reinforced concrete pipes class NP-3 , 300 mm bore laid and jointed with collars for protection of cables under road crossing, in trenches etc complete all as specified and directed

M & L for Reinforced concrete pipes, 450 mm bore class NP-2 , laid and jointed with collars complete all as specified and directed

M&L for DWCPE(SN8) single hume pipe 150mm internal dia pipes laid over 100mm thick bed including all items and activities to execute and make sewer line functional complete all as specified and directed

M&L for Writing letters/ Signs/ Arrows with fluorescent paint as directed complete all as specified and directed

M&L 150mm thick soling (or sub base) spread thickness with broken boulders or quarried stones (90mm to 63mm size of boulders), inter stices filled surface formed and rolled and consolidate to required gradient and camber with 8 to 12 tonne power roller complete all as specified and directed.

M&L 200mm thick soling (or sub base) spread thickness with broken boulders or quarried stones (90mm to 63mm size of boulders), inter stices filled surface formed and rolled and consolidate to required gradient and camber with 8 to 12 tonnne power roller complete all as specified and directed

M&L 150mm thick (compacted thickness) WBM in two layers of 75mm each with broken stone aggregate of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size) using granite, trap or basalt, spread, rolled and conoslidated to required gradient, camber, level, super elevation with 8 to 12 tonne power roller complete all as specified and directed.

M&L 200mm thick (compacted thickness) WBM in two layers of 100mmm each with broken stone aggregate of grading 2 (63mm to 40mm size) or of grading 3 (50mm to 20mm size),using granite, trap or basalt, spread, rolled and consolidated to required gradient, camber, level, super elevation with 8 to 12 tonne power roller complete all as specified and directed.

M&L for preparation unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the clean surface with gunny bags to remove all loose dirt etc.complete all as specified and directed

M&L for applying evenly a priming/tack coat with bituminous primer of paving bitumen @ 10 kg per 10 sqm. complete all as specified and directed

Rolling and consolidating formation surfaces in cutting by 8 to 12 tonne power roller including filling depression which occurs during rolling complete all as specified and directed

M&L bituminous premix asphaltic semi dense concrete 40mm consolidated thickness with 5.5% binder (paving bitumen any penetration) content by weight of total mix, rolled and compacted to required camber and gradient with 8 to 12 tonne power roller complete all as specified and directed

Cement concrete work in pavement/hard standing of flexural strength 40 Kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25cm or less including necessary form work complete all as specified and directed.

Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound Grade A for 100mm thick slab complete all as specified and directed.

Add or deduct from item 210 above for every 3mm depth of joint over or under complete all as specified and directed

Forming 20mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound Grade A for 200mm thick slab complete all as specified and directed.

Forming construction joint 30mm deep x 10mm wide filled with sealing compound Grade A. complete all as specified and directed

RCC NP3 150 mm diameter Pipes laid over 150 mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) (cradle) bed including excavation in any type of soil, including manholes/drop manhole of standard size made of Brick masonry with SFRC ventilating cover and frame. Including all items and activities to execute and make sewer line functional. (Laying depth of pipe varies from 0.7m to 1.65m below original ground level)

Supply and erect/construction of LLDPE modular Vertical /Horizontal Septic Tank 5 users capacity, made out of polyethylene resins, designed to carry sewage and sludge water including inlet, outlet & vent shaft pipe, valve & all necessary civil works as required with all fittings, fixtures etc. complete all as specified Notes:-(i) PCC and earthwork shall be measured and paid separately.

Supply and erect/construction of LLDPE modular Vertical /Horizontal Septic Tank 10 users capacity, made out of polyethylene resins, designed to carry sewage and sludge water including inlet, outlet & vent shaft pipe, valve & all necessary civil works as required with all fittings, fixtures etc. complete all as specified Notes:-(i) PCC and earthwork shall be measured and paid separately.

Supply and erect/construction of LLDPE modular Vertical /Horizontal Septic Tank 20 users capacity, made out of polyethylene resins, designed to carry sewage and sludge water including inlet, outlet & vent shaft pipe, valve & all necessary civil works as required with all fittings, fixtures etc. complete all as specified Notes:-(i) PCC and earthwork shall be measured and paid separately.

Supply and erect/construction of LLDPE modular Vertical /Horizontal Septic Tank 25 users capacity, made out of polyethylene resins, designed to carry sewage and sludge water including inlet, outlet & vent shaft pipe, valve & all necessary civil works as required with all fittings, fixtures etc. complete all as specified Notes:-(i) PCC and earthwork shall be measured and paid separately.

Supply and erect/construction of LLDPE modular Vertical /Horizontal Septic Tank 35 users capacity, made out of polyethylene resins, designed to carry sewage and sludge water including inlet, outlet & vent shaft pipe, valve & all necessary civil works as required with all fittings, fixtures etc. complete all as specified Notes:-(i) PCC and earthwork shall be measured and paid separately.

Supply and erect/construction of LLDPE modular Vertical /Horizontal Septic Tank 100 users capacity, made out of polyethylene resins, designed to carry sewage and sludge water including inlet, outlet & vent shaft pipe, valve & all necessary civil works as required with all fittings, fixtures etc. complete all as specified Notes:-(i) PCC and earthwork shall be measured and paid separately.

M & L for Soakage wells of size 1.2x3.0m, with all fittings and fixtures complete all as specified and shown on drawing No. TD/SZ/502 sheet No 1/1

M & L for Soakage wells of size 1.8x3.0m, with all fittings and fixtures complete all as specified and shown on drawing No. TD/SZ/502 sheet No 1/1

M & L for Soakage wells of size 1.8x4.5m, with all fittings and fixtures complete all as specified and shown on drawing No. TD/SZ/502 sheet No 1/1

M & L for Soakage wells of size 2.4x4.5m, with all fittings and fixtures complete all as specified and shown on drawing No. TD/SZ/502 sheet No 1/1

Testing drains as specified to filling the pipes with water to a head of 1.5m at the highest point including temporarily fixing of bends, etc. as required not exceeding 150mm dia complete all as specified and directed

Testing manholes i.e either smoke test etc. as specified by filling with water complete all as specified and directed

S&F 15mm bore GI Pipe medium grade with all fitings and fixed to wall and ceiling or laid in floor complete all as specified and directed

Supply & laying galvanized steel tubing "Light grade" of size 100 mm bore with GI fittings and laid in trenches/ under roads/ along pole/ wall for cable protection complete all as specified and directed

Supply & laying galvanized steel tubing "Light grade" of size 80 mm bore with GI fittings and laid in trenches/ under roads/ along pole/ wall for cable protection complete all as specified and directed

Supply & laying galvanized steel tubing "Light grade" of size 50 mm bore with GI fittings and laid in trenches/ under roads/ along pole/ wall for cable protection complete all as specified and directed

Supply & laying galvanized steel tubing "Light grade" of size 40 mm bore with GI fittings and laid in trenches/ under roads/ along pole/ wall for cable protection complete all as specified and directed

Supply & laying galvanized steel tubing "Medium grade" with GI fittings and laid in trenches/ under roads size 40 mm bore complete all as specified and directed

Supply & laying galvanized steel tubing "Medium grade" with GI fittings and laid in trenches/ under roads size 25 mm bore complete all as specified and directed

Supply & laying galvanized steel tubing "Medium grade" with GI fittings and laid in trenches/ under roads size 20 mm bore complete all as specified and directed

Supply & laying galvanized steel tubing "Medium grade" of size 80 mm bore with GI fittings and fixtures for connection from borewell to UG sump complete all as specified and directed

S&F 40mmdia GI Pipe light grade, with GI fittings and fixtures and fixed in wall complete all as specified and directed

S&F 50mmdia GI Pipe light grade with GI fittings and fixtures and fixed in wall complete all as specified and directed

Supply and fix 40mm dia Tubes, 'Medium grade' galvanised, with all fitting and fixtures fixed complete to walls and roofs or laid in floor for supports while extending air termination rod complete all as specified and directed.

Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR-Part-I 500 Litres capacity complete all as specified and directed

Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR- Part-I 300 Litres capacity complete all as specified and directed

Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR- Part-I 1000 Litres capacity complete all as specified and directed

S&F bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete all as specified and directed

Pillar taps 15mm, cast copper alloy, with capstan heads, chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe and fixed complete all as specified and directed

Supply & fixed stop valves, 15mm dia, cast copper alloy,CP, fancy type screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed

Supplying and fixing Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 40 mm dia all inclusive complete all as specified and directed

Supplying and fixing Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 25 mm dia complete all as specified and directed

Supplying and fixing Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 20 mm dia complete all as specified and directed

Supply and Fix 75mm bore cast iron soil, waste and vent pipe, (spun) in any length with or without ears with cement joints laid in Floor complete all as specified and directed.

Supply and Fix 100mm bore cast-iron soil waste and vent pipe, (spun) in any length with or without ears with cement joints laid in trenches / floor complete all as specified and directed

Supply and Fix 75mm bore cast iron soil, waste and vent pipe in any length with or without ears with cement joints fixed to walls complete all as specified and directed

Supply and Fix 100mm bore cast iron bends or diminishing pieces or tapers( larger bore measured) complete all as specified and directed.

Supply and Fix 75mm bore cast iron bends or diminishing pieces or tapers( larger bore measured) complete all as specified and directed.

Supply and Fix 100mm bore cast iron branch pieces, single (equal or unequal), and ordinary or inverted or with parallel branches complete all as specified and directed.

S&F cast iron cowl 75 mm dia complete all as specified and directed

Supplyig and fixed 75mm cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4)(using 20mm graded stone) complete all as specified and directed

Supply and laying IS Marked un-reinforced precast concrete cable cover as per IS 5820-1970 class LV, Type - 1 flat size 250 mm x 150mm x 40mm thick, complete all as specified and directed. Note: All cable covers to be embossed with letters "LT CABLE' as specified

S&G Salt-glazed stoneware gully traps,150X150 mm square or round mouthed, type 'P' complete all as specified and directed

Supply and fix Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including seat cover complete all as specified and directed

S&F sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed

Supply and fix vitreous china squatting pan ‘Orissa pattern’ size 580 x 440 mm white, with integral foot rest (excluding flushing cistern and flush pipe) complete all as specified and directed .

Supply and fix vitreous china urinal flat back type of size of 465 x 355 x 265 mm white with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing of plugs, bedding against wall in cement mortar 1:2, securing urinal to plugs complete all as specified and directed.

Supply and fix , 10 litres capacity, PVC valve less, syphonic action type flushing cistern, low level, white with inlet ball valve float, handle and flush pipe including brackets complete all as specified and directed

Supply and fix vitreous china, wash hand basin, white, flat back, size 550 x 400 mm including brackets, brass chromium plated waste fitting complete all as specified and directed.

Supply and fix counter top WHB of size 560mmx410mm with 600mmx 900 high mirror cover plate all as specified including brass chromium plated waste fitting complete all as specified and directed.

Partition for Urinal with white vitreous china of size 310x700mm complete all as specified and directed

S&F 1.6mm thick PGI sheet as in chute for hose complete all as specified and directed

S&F Puddle Flange 100mm dia complete all as specified and directed

S&F PGI Sheet 18 gauge as water bar complete all as specified and directed

S&F SS peg set of 3 complete all as specified and directed

S&F Steel rolling shutters, (lath thickness 1.25) with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified and directed

Supply and install hot dip galvanized steel (IS 5986 Gr FeE 510E) octagonal pole 7.0 meters long, top dia 70mm, bottom dia 130mm having thickness 3mm having door opening of size 500mm above 500 mm from ground level, with CI base plate of size 240x240x16mm having PCD 220mm, foundation J bolts M20x700mm (570+130of J), nuts and screws and having hot dip galvanized single plain arm bracket 1000mm overhang fixed on top with bolts including connection cable from junction box to light fitting @ 6Rm/Each pole complete all as specified. Note:- (a)Earthwork and PCC will be measured and paid under appropriate items in of Schedule 'A'/BOQ. PCC for fundation of pole shall be as per manufactur's. (b) Volume occupied by Steel Pole shall be deducted to derive the quantity of PCC.

Steel Tubular Swaged Poles Type 410-SP-55 (11 Metre long) including cast iron base plate, finial taper plug, cap, mild steel bolts, screws, etc. including applying two coats of black bituminous paint internally and externally upto planting depth and applying two coats of aluminium paint over a coat of aluminium primer (externally from top of PCC copping) including writting MES Pole No. with synthetic enamel paint (first grade quality) complete all as specified. Note: (a) Earthwork and PCC will be measured and paid under appropriate items in of Schedule 'A'/BOQ (b) Volume occupied by Steel Pole shall be deducted to derive the quantity of PCC.

S & F Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat of red oxide zinc chrome primer and two coats of alluminium paint including preparation of surfaces complete all as specified and as directed.

M & L for Aluminium Conductor,Steel Reinforced of any size and type on HT, LT Poles including straining,binding with insulators with copper binding wire with insulators as in OH conductors, providing PVC Sleeves for jumper complete all as specified and as directed.

M & L for Anti-climbing device; spikes type fabricated out of M.S. bars (round, square and flat) including nuts, bolts, washers and welding in two halves made to shape to suit the cross section of the pole complete all as specified and as directed.

Danger notice plate of size 25 X 20 cm of 1.6 mm thick mild steel sheet vitreous enamelled white , with letters ,figures and conventional skull and bones in signal red colour and fixed with MS clamps , bolts and nuts of approved size for HT conforming to IS - 2551 complete all as specified and as directed .

M & L for Swing out expulsion fuse single pole (drop out fuse) for 11000 Volts of capacity up to 200 Amps complete all as specified and as directed.

Supply and fixing of Air break gang operated switch triple pole mechanically operated out door with all fitting/ accessories mounted on and including 11 KV porcelain insulator and steel channel frame GI operating rod 25 mm dia of suitable length with operating mechanism worked from ground level vertically operated as per site requirement including locking arrangement for operating handle complete suitable for current rating 200 Amps 11 KV working pressure with 15 Insulators complete all as specified and directed by Engr in charge.

Supply and fix lightning arresters metal oxide type, distribution class, discharge capacity 5 kilo amp, suitable for 11KV, confirming to IS -3070 complete all as specified and directed.

Supply, install, testing and commissioning of distribution Transformer out door, step down,copper wound having primary side for HT 11KV & secondary for 3 phase 433 Volts, 4 wire 50 Hz capacity of 160 KVA and Energy efficient Level -3 as per IS 1180 of 2014 Part-I with the following specification :- (i) No load voltage ratio-11/.433 KV. (ii) Nos of phase-three. (iii) Type of cooling- ONAN. (iv) Frequency 50 Hz. (v) Vector group-DYN 11. (vi) Two earthing terminals for body earthing and two additional for neutral brought out on a bushing. (vii) First fill of oil, oil level gauge indicating oil level minmum and maximum. (viii) Lifting lugs. (ix) Rating and terminal marking plates. (x) dehydrating breathing device which would not permit ingress of rain water and insects. (xi) Drain-cum-sampling valve (3/4" nominal size thread) preferably steel with plug. (xii) Thermometer pocket. (xiii) Oil filling hole( 1-1/4" Nominal size thread) with cover. (xiv) Connection-Delta/Star. (xv) Temperature rise in oil-45 deg Centigrade. (xvi) Temperature rise in windings- 55 deg Centigrade. (xvii) Material winding-Copper wound. (xviii) High voltage/low voltage-Bushing with box (xix) Service-Outdoor type. (xx) Neutral- Internally connected with earthing lead and bush. (xxi) Off load tap changing (+ or - 7.5% in step of + or - 2.5% or as per relevant IS)

Supply, install, testing and commissioning of distribution Transformer out door, step down,copper wound having primary side for HT 11KV & secondary for 3 phase 433 Volts, 4 wire 50 Hz capacity of 200 KVA and Energy efficient Level -3 as per IS 1180 of 2014 Part-I with the following specification :- (i) No load voltage ratio-11/.433 KV. (ii) Nos of phase-three. (iii) Type of cooling- ONAN. (iv) Frequency 50 Hz. (v) Vector group-DYN 11. (vi) Two earthing terminals for body earthing and two additional for neutral brought out on a bushing. (vii) First fill of oil, oil level gauge indicating oil level minmum and maximum. (viii) Lifting lugs. (ix) Rating and terminal marking plates. (x) dehydrating breathing device which would not permit ingress of rain water and insects. (xi) Drain-cum-sampling valve (3/4" nominal size thread) preferably steel with plug. (xii) Thermometer pocket. (xiii) Oil filling hole( 1-1/4" Nominal size thread) with cover. (xiv) Connection-Delta/Star. (xv) Temperature rise in oil-45 deg Centigrade. (xvi) Temperature rise in windings- 55 deg Centigrade. (xvii) Material winding-Copper wound. (xviii) High voltage/low voltage-Bushing with box (xix) Service-Outdoor type. (xx) Neutral- Internally connected with earthing lead and bush. (xxi) Off load tap changing (+ or - 7.5% in step of + or - 2.5% or as per relevant IS)

Supply, install, testing and commissioning of distribution Transformer out door, step down,copper wound having primary side for HT 11KV & secondary for 3 phase 433 Volts, 4 wire 50 Hz capacity of 315 KVA and Energy efficient Level -3 as per IS 1180 of 2014 Part-I with the following specification :- (i) No load voltage ratio-11/.433 KV. (ii) Nos of phase-three. (iii) Type of cooling- ONAN. (iv) Frequency 50 Hz. (v) Vector group-DYN 11. (vi) Two earthing terminals for body earthing and two additional for neutral brought out on a bushing. (vii) First fill of oil, oil level gauge indicating oil level minmum and maximum. (viii) Lifting lugs. (ix) Rating and terminal marking plates. (x) dehydrating breathing device which would not permit ingress of rain water and insects. (xi) Drain-cum-sampling valve (3/4" nominal size thread) preferably steel with plug. (xii) Thermometer pocket. (xiii) Oil filling hole( 1-1/4" Nominal size thread) with cover. (xiv) Connection-Delta/Star. (xv) Temperature rise in oil-45 deg Centigrade. (xvi) Temperature rise in windings- 55 deg Centigrade. (xvii) Material winding-Copper wound. (xviii) High voltage/low voltage-Bushing with box (xix) Service-Outdoor type. (xx) Neutral- Internally connected with earthing lead and bush. (xxi) Off load tap changing (+ or - 7.5% in step of + or - 2.5% or as per relevant IS)

Supply and fix cable jointing kit for 11 KV(Earthed) grade cable for indoor termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE, armoured, Aluminium conductor cable of size 95 sqmm complete all as specified and directed.

Supply and fix cable jointing kit for 11 KV(Earthed) grade cable for indoor termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE, armoured, Aluminium conductor cable of size 185 sqmm complete all as specified and directed

Supply and fix cable jointing kit for 11 KV(Earthed) grade cable for out door termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE, armoured, Aluminium conductor cable of size 95 sqmm complete all as specified and directed

Supply and fix cable jointing kit for 11 KV(Earthed) grade cable for out door termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE, armoured, Aluminium conductor cable of size 185 sqmm complete all as specified and directed

Supply and fix cable jointing kit for 11 KV(Earthed) grade cable for straight through cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE, armoured, Aluminium conductor cable of size 50 Sqmm to 95 sqmm complete all as specified and directed

Material and labour for laying IS Marked un-reinforced precast concrete cable cover as per IS 5820-1970, class HV, type 1 with peak, size 300x180x40 mm complete all as specified and directed. Note : All cable covers to be embossed with letters "HT CABLE" complete all as specified and directed

Supply, laying and testing for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 Sqmm 2 Core as per IS 1554 Part-I and IS 7098 Part-I all as specified and directed

Supply, laying and testing for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 Sqmm 4 core as per IS 1554 Part-I and IS 7098 Part-I all as specified and directed

Supply, laying and testing for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 Sqmm 4 core as per IS 1554 Part-I and IS 7098 Part-I all as specified and directed

Supply, laying and testing for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 Sqmm 4 core as per IS 1554 Part-I and IS 7098 Part-I all as specified and directed

Supply, laying and testing for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 35 Sqmm 3.5 core as per IS 1554 Part-I and IS 7098 Part-I all as specified and directed

Supply, laying and testing for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 50 Sqmm 3.5 core as per IS 1554 Part-I and IS 7098 Part-I all as specified and directed

Supply, laying and testing for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 70 Sqmm 3.5 core as per IS 1554 Part-I and IS 7098 Part-I all as specified and directed

Supply, laying and testing for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 120 Sqmm 3.5 core as per IS 1554 Part-I and IS 7098 Part-I all as specified and directed

Supply, laying and testing for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 150 Sqmm 3.5 core as per IS 1554 Part-I and IS 7098 Part-I all as specified and directed

Supply, laying and testing for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 185 Sqmm 3.5 core as per IS 1554 Part-I and IS 7098 Part-I all as specified and directed

Supply, laying and testing for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 240 Sqmm 3.5 core as per IS 1554 Part-I and IS 7098 Part-I all as specified and directed

Supply, laying and testing for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 300 Sqmm 3.5 core as per IS 1554 Part-I and IS 7098 Part-I all as specified and directed

Supply, laying & testing HT cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 11000 volts grade (Earthed), of size 3 core 95 sq mm complete as per IS 1554 Part-II and IS 7098 Part-II all as specified and directed

Supply, laying & testing HT cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 11000 volts grade (Earthed), of size 3 core 185 sq mm complete as per IS 1554 Part-II and IS 7098 Part-II all as specified and directed

M & L for Concealed Point wiring with 1.5 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 volts grade multi stranded copper conductor single core cable drawn through and including non-metallic rigid PVC conduit of adequate size with all fittings and accessories including mild steel terminal boxes with laminated sheet for mounting switches, socket, regulators etc complete including FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 1.5 Sqmm green in colour as earth continuity conductor connected to common earth dolly for One light point controlled by one,one way switch complete all as specified and directed

M & L for Concealed Point wiring with 1.5 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 volts grade multi stranded copper conductor single core cable drawn through and including non-metallic rigid PVC conduit of adequate size with all fittings and accessories including mild steel terminal boxes with laminated sheet for mounting switches, socket, regulators etc complete including FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 1.5 Sqmm green in colour as earth continuity conductor connected to common earth dolly for One Ceiling/Exhaust fan point controlled by one,one way switch complete all as specified and directed

M & L for Concealed Point wiring with 1.5 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 volts grade multi stranded copper conductor single core cable drawn through and including non-metallic rigid PVC conduit of adequate size with all fittings and accessories including mild steel terminal boxes with laminated sheet for mounting switches, socket, regulators etc complete including FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 1.5 Sqmm green in colour as earth continuity conductor connected to common earth dolly for One light point controlled by two, two way switches complete all as specified and directed

M & L for Concealed Point wiring with 1.5 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 volts grade multi stranded copper conductor single core cable drawn through and including non-metallic rigid PVC conduit of adequate size with all fittings and accessories including mild steel terminal boxes with laminated sheet for mounting switches, socket, regulators etc complete including FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 1.5 Sqmm green in colour as earth continuity conductor connected to common earth dolly for One 3 pin socket outlet 5 amps on the same board with other switches complete all as specified and directed

M & L for Concealed Point wiring with 1.5 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 volts grade multi stranded copper conductor single core cable drawn through and including non-metallic rigid PVC conduit of adequate size with all fittings and accessories including mild steel terminal boxes with laminated sheet for mounting switches, socket, regulators etc complete including FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 1.5 Sqmm green in colour as earth continuity conductor connected to common earth dolly for One socket outlet point 6 A on independent board complete all as specified and directed

M & L for Concealed Point wiring with 1.5 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 volts grade multi stranded copper conductor single core cable drawn through and including non-metallic rigid PVC conduit of adequate size with all fittings and accessories including mild steel terminal boxes with laminated sheet for mounting switches, socket, regulators etc complete including FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 1.5 Sqmm green in colour as earth continuity conductor connected to common earth dolly for One bell/buzzer point controlled by one push button on the same board with other switches complete all as specified and directed.

M & L for concealed Point wiring with 2.5 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 volts grade multi stranded copper conductor single core cable drawn through and including non-metallic rigid PVC conduit of adequate size with all fittings and accessories including mild steel terminal boxes with laminated sheet for mounting switches & socket, including one run of FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 2.5 Sqmm green in colour as earth continuity conductor connected to common earth dolly for one 16 Amp socket outlet on independent board complete all as specified and directed.

S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed

S & F Piano Switch single pole, one way flush type 6 Amp, 230 Volt complete all as specified and directed

S & F Piano Switch two way single pole flush type 6 Amp, 230 Volt complete all as specified and directed

S & F bell push single pole flush type 6 Amp, 230 Volt complete all as specified and directed

S & F Buzzer, Ding Dong AC. 230 volts, single pole complete all as specified and directed

S & F Switch Socket combination outlet flush type universal 2 in 1, 3 pin 6 and 16 Amps, 230 volt complete all as specified and directed

S & F Switch Socket Combination outlet flush type universal 2 in 1, 3 pin 6 Amps, 230 volt complete all as specified and directed

Supply and fix epoxy powder coated Distribution Board, double door SPN 8 way for MCBs with common bus-bar at incoming end of outgoing MCBs grouted/ flush to wall complete all as specified and directed

Supply and fix epoxy powder coated Distribution Board, double door SPN 4 way for MCBs with common bus-bar at incoming end of outgoing MCBs grouted/ flush to wall complete all as specified and directed

Supply and fix epoxy powder coated Distribution Board, double door TPN 4 way for MCBs with common bus-bar at incoming end of outgoing MCBs grouted/ flush to wall complete all as specified and directed

Supply and fix air termination, single pointed aluminium rod,12 mm dia, 300mm long complete all as specified and directed.

S&F test point terminal block made of gun metal or phosphorus bronze size 75x75x25 mm drilled and screwed including 3 nos 08 mm dia 25mm long hexagonal head screw complete all as specified and directed

Supply and fixing Aluminium strip 25 x 3.15mm DMC insulator and fixing screws etc. for roof conductors and down conductor above ground complete all as specified and directed.

S & F Ceiling rose surface bakelite three terminals complete all as specified and directed

Materials and labour for Earthing complete with GI earth plate electrode 60 cm X 60 cm X 6 mm thick, burried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.50 mtr below normal ground level connected to GI earth lead 4 mm dia by means of GI bolts, nuts, check nuts, washers made out of GI/steel, all as shown on electrical plate No 3 of MES schedule part-I, earth lead strip connected to indicated position including 7.5m long 15 mm bore GI pipe for earth wire protection and concrete pit in PCC(1:3:6, C1),Precast RCC cover slab 55 cm x 55 cm x 5 cm with reinforcement of 8 mm dia bar 100 mm c/c bothways including one handle made of 12 mm dia MS bar embedded in pre cast slab and 20 mm bore galvanised iron pipe"medium grade" for watering with GI funnel and wire mesh including charcoal and salt in alternate layers of 15 cm including necessary excavation and earth work in any type of soil and testing on completion complete all as specified and as directed by Engineer in Charge.

M&L Earthing with Galvanised Earth Plate Electrode 600x600x6.0mm thick burried directly in Ground (Earth Pit not less than 2.25 Metre below Ground Level) with Top edge of the Plate not less than 1.50 Metre below Ground Level, connected with and including Galvanised Earth Strip of size 32x6.0mm by means of Bolts, Nuts, Check nuts and Washers of GI or Steel and connected Earthing Testing Point/Bus-bar with GI 40mm bore (dia) Light grade Protection Pipe, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt in alternate layers of not exc. 150mm thick, PCC Pit in Cement Concrete 1:3:6 (20mm graded stone aggregate) and Pre-cast RCC Cover Slab of size 350x350x50mm in Cement Concrete 1:2:4 (20mm graded stone aggregate), reinforced with 10mm dia TMT Bars @ 100mm Centre to Centre in both ways, GI Wire Mesh, PGI Funnel with GI Watering Pipe 20mm bore (dia) Medium grade including necessary Excavation in Soft/Loose Soil, Returning, Filling in and Removal of surplus Spoil upto a distance of 50.00 Metre and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing on Completion complete all as per specified and as directed.

M & L for 4mm dia GI wire for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or any other indicated situation for loop earthing etc. as required complete all as specified and directed.

Supply and fixing Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required with Galvanized iron strip 32 x 6mm complete all as specified and directed

S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc as required and complete all as specified and directed

M & L for Concealed Sub main Wiring with two run of 1.5 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 volts grade multistranded copper conductor single core cable drawn through and including PVC Conduit of adequates size and fittings and accessories concealed in walls, floors and ceilings complete including one run of FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 1.5 Sqmm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed. Note:(Two single core cable and one No. earth wire and one run of conduit shall be measured together as one length)

M&L submain wiring with two single core PVC insulated (FRLSH) unsheathed multi stranded copper conductor cable confirming to IS-694-1990 of size 6 sqmm (nominal area) drawn through and including stove enamelled steel conduit with all accessories/fittings, fixed/laid concreate in wall/ceiling and continous PVC insulated single core copper conduit (FRLSH) stranded unsheathed 6 sqmm as earth wire complete all as specified and directed Note:(Two single core cable and one No. earth wire and one run of conduit shall be measured together as one length)

M & L for Concealed Sub main Wiring with two run of 6 Sqmm (nominal cross-sectional area) FRLSH PVC insulated & unsheathed 1100 volts grade multistranded copper conductor single core cable drawn through and including PVC Conduit of adequates size and fittings and accessories concealed in walls, floors and ceilings complete including one run of FRLSH PVC insulated & unsheathed single core multistranded copper conductor cable of size 6 Sqmm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed. Note:(Two single core cable and one No. earth wire and one run of conduit shall be measured together as one length)

Supply and fixing weather proof flat twin core 2.5 Sqmm aluminium conductor complete all as specified and directed.

S & F BEE star-rated energy efficient LED retrofit bulb 12W CDL (6500K) B22 ball lamp complete all as specified and directed.

S & F TPN MCB, 10KA, 'C' curve 10 Amps complete all as specified and directed.

S & F TPN MCB, 10KA, 'C' curve 25 Amps complete all as specified and directed. .

S & F TPN MCB, 10KA, 'C' curve 40 Amps complete all as specified and directed.

S & F TPN MCB, 10KA, 'C' curve 63 Amps complete all as specified and directed. .

S & F SPN MCB, 10KA, 'C' curve 10 Amps complete all as specified and directed. .

S & F SPN MCB, 10KA, 'C' curve 25 Amps complete all as specified and directed. .

S & F SPN MCB, 10KA, 'C' curve 40 Amps complete all as specified and directed. .

S & F Single pole MCB, rupturing capacity 10 kA, 'C' curve , 6 to 32 Amp complete all as specified and directed.

S & F Blanking plate complete all as specified and directed. .

S & F ceiling fan complete with blades, down rods, electronic regulator, 230V, 1200mm sweep min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) and suspended from fan hook and electrically connecting with twisted three core PVC insulated unsheated flexible cord of 0.70 Sqmm copper conductor cable from ceiling rose to fan complete all as specified and directed. .

Supply and fixing Exhaust fan 225 mm sweep metal body AC single phase 230V with self closing louvers, electrically connecting with twisted three core PVC insulated unsheated flexible cord of 0.70 Sqmm copper conductor cable from ceiling rose to Exhaust fan complete all as specified and directed. .

S & F of LED batten with inbuilt driver made out of high quality aluminium extruded housing and aluminium heat sink for mounting LEDs, mercury free and decorative end caps with maximum power consumption 24 Watts with min system luminous efficiency lumen/watt > 100, CCT not less than 6500K and CRI > 80, operating voltage of 140-270 volts AC, P.F. > 0.90, 2.5 KV surge protection and current THD < 15% complete and including all other standard accessories as per manufacturer's instructions, internally pre-wired including connecting up with twin core 0.75 Sqmm copper conductor flexible wire/cable complete all as specified.

S & F of LED batten with inbuilt driver made out of high quality aluminium extruded housing and aluminium heat sink for mounting LEDs, mercury free and decorative end caps with maximum power consumption 20 Watts with min system luminous efficiency lumen/watt > 100, CCT not less than 6500K and CRI > 80, operating voltage of 140-270 volts AC, P.F. > 0.90, 2.5 KV surge protection and current THD < 15% complete and including all other standard accessories as per manufacturer's instructions, internally pre-wired including connecting up with twin core 0.75 Sqmm copper conductor flexible wire/cable complete all as specified.

S & F of LED batten with inbuilt driver made out of high quality aluminium extruded housing and aluminium heat sink for mounting LEDs, mercury free and decorative end caps with maximum power consumption 9-10 Watts with min system luminous efficiency lumen/watt > 100, CCT not less than 6500K and CRI > 80, operating voltage of 140-270 volts AC, P.F. > 0.90, 2.5 KV surge protection and current THD < 15% complete and including all other standard accessories as per manufacturer's instructions, internally pre-wired including connecting up with twin core 0.75 Sqmm copper conductor flexible wire/cable complete all as specified.

S & F new generation energy saving and environmental friendly long life LED security light 20 watts made up of pressure die cast alluminium housing with high power LED as light source and lense embedded PC cover having TOP OPENING separate driver compartment with IP65 protection and impact resistance of IK07, with all accessories including suitable bracket with 25mm bore light grade GI pipe bend to shape, including MS clamp of required size and PVC cable 1.5 Sqmm twin core from ceiling rose to light fittings complete all as specified and directed

M&L for switch flame proof rotary type with termination box in LM6,16A, single pole 250V complete all as specified and directed. .

M&L for flame proof switch & plug combined in LM6 cable termination box in LM6, 16A,250V,2P+ earth. complete all as specified and directed.

S&F CIMFR certified 20W LED flameproof batten suitable and including single T8 tube of 20 Watts, IP 65 protected complete all as specified and directed. .

S&F CIMFR certified 30W LED flameproof Wellglass in die cast Aluminium housing with heat resistant toughened glass, IP 65 protected including lamp complete all as specified and directed.

S & F 09 watt LED Bulk head light fitting comprising of pressure die cast housing with acrylic diffuser (IP65 protection) including lamp complete all as specified and directed.

Single Phase Kwh meter with LCD display, base mounting type 1P LCD Meter 5-30A with BOX enclosed in Hot press moulded SMC Meter box of size 250x200x100mm with single door having viewing glass complete all as specified and directed. .

Supply , installation, testing and commissioning of Flame proof EOT Crane of 5 MT capacity, class M-5 indoor operation (without cabin) as per IS 807 & 3177 , Double Girder and having a span 18.00 metre and hook height 5.25meter, longitudinal travel 10mtr/min inside the shed area with electrically operated speed hoist 5meter/min & micro speed through pendent push button station floor operated type complete with supply of not less than 40mm sq bar rail at both side and trailing cables ( extra flexible having copper conductors only) should be travelling on rollers moving on separate I- beam parallel to Bridge Girder CT shall be supplied with ready chain system tongue and cross travel 5meter/min. For LT shrouded busbar 200 A rated GI type PVC insulated current collector system totally enclosed flame froof type to be provided, complete with an including main frame, bridge girder , end carriages, trolley with frame, crabs, buffers, gear with boxes , shafts, rope drum , rope sheaves/rope guides,wire rope, wheels, lifting hooks, brakes, bottom blocks induction motor ,variable voltage & variable frequency drive( VVVF drive), limit switches, emergency switches , wrong connection prevention device, protection pannel/ control gear , resistor pendent push button station,current collection,wiring earthing connection etc and including all other standard accessories and all as specified in particular specifiations, section 24 of SSR part-I and manufacturer's instruction and complete all as specified as directed. Note:- (a) The contractor shall measure the exact lenghts of span for cross travel (CT) and bay length for longitudinal travel (LT) before preparation of GA Drawings. The item shall be complete all as per manufacturer''s specifications including control panel (to be installed outside the room). (b) Gantry girder for LT travel and LT rail bar shall be provided by the EOT Crane manufacturer and rate is deemed to be included in above quated rate.

Supply and fix Detectors flame proof complying with and type certified to EN-45 Addressable type smoke detector Photoelectric / Optical with base with self built intelligence as per IS: 11360 complete all as specified and directed.

Supply and fix Fire Alarm sounders / Sirens electronic type horizontal double mounting single stage continuous normal operation for at least 50 minutes with sound level 65 DB to 120 DB measured at 1.5 meter with sound output variation of + 5 DB for not less than 3500 meter range (diameter) with DOL starter with addl auxillary control (NO+NC) complete. (to be fixed outside the building)

Wiring 2 runs of 1.5 sqmm PVC insulated copper cable HRFR-LSH with ISI mark drawn through surface type flame proof 16 SWG steel conduit including flame proof junction boxes and accessories complete all as specified.

Supplying and fixing valves, sluice, flanged of class 1.0PN of size 80 mm dia complete all as specified and directed.

Supplying and fixing valves, sluice, flanged of class 1.0PN of size 150 mm dia complete all as specified and directed.

Supplying and fixing valves, sluice, flanged of class 1.0PN of size 100 mm dia complete all as specified and directed.

Supplying and fixing Reflux Valves (NRV) with by pass arrangement supplied and installed complete of size 150 mm complete all as specified and directed.

Supplying and fixing Reflux Valves (NRV) with by pass arrangement supplied and installed complete of size 100 mm complete all as specified and directed.

Supplying and fixing Reflux Valves (NRV) with by pass arrangement supplied and installed complete of size 80 mm complete all as specified and directed.

Fire alarm control panel complying with BS EN 54 Single loop panel of capacity from 99 detectors & 99 modules upto 200 detector and modules all as specified in SSR Part-I. Note : (i)The panel shall be fixed outside the building. (ii) Earthing wire 4mm dia for Fire Alarm control panel shall be measured and paid in relevant item under Sch-A.

Supply and install Addressable control module complete all as specified and directed.

Supply and fix Addressable manual call point resettable type complete all as specified and directed.

Supply, installation, commissioning of 200 litres Glass Top Deep Freezer single phase 240 volt, 50 Hz complete all as specified and directed. .

Supply, installation, commis-sioning of Water cooler fully stainless steel, electric driven single phase having approximate storage and nominal cooling capacity of 40 litre and nominal cooling capacity of 40 Litres per hour complete all as specified and directed.

Supply, installation, commissioning of Water cooler fully stainless steel, electric driven single phase having approximate storage and nominal cooling capacity of 80 litre and nominal cooling capacity of 40 Litres per hour complete all as specified and directed. .

Supply, installation, commis-sioning of Water cooler fully stainless steel, electric driven single phase having approximate storage and nominal cooling capacity of 120 litre and nominal cooling capacity of 60 Litres per hour complete all as specified and directed. .

Supply and fix Voltage stabilizer IS marked (IS:8448 -1989)for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 1 KVA complete all as specified and directed.

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 2 KVA complete all as specified and directed.

Supply and fix refrigerator, electric driven (single phase), capacity 195 Litres .BEE 5 star rated complete all as specified and directed.

Supply and fix refrigerator, electric driven (single phase), capacity 310 Litres.BEE 5 star rated complete all as specified and directed.

Constructing brick masonary chamber 1250x1250x1100mm inside with 75 class designation brick work in cement mortar 1: 4 ( 1 cement : 4 coarse sand ) for sluice valve with 600x600mm internal dimension(10 Ton load bearing) FRP cover with frame and RCC top slab 1:2:4 mix(1 cement:2 coarse sand:4 graded stone aggregate 20mm nominal size) necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand:10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3(1 cement :3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design complete all as specified and shown in drawing

Constructing brick masonary Chamber 60x60x60 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for valve chamber, with FRP cover with frame 600x600mm internal dimensions (10 ton load bearing) i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design complete all as specified and shown in drawings .

Supply & laying and jointing 100mm dia Ductile Iron pipe, with spigot and socket ends suitable for push on rubber joint centrifugally cast Class “K-9” inner side cement lining and outer side black bitumen coating laid in trenches including push on rubber (EPDM) ring with ISI marked complete all as specified and directed. .

Supply & laying and jointing 150mm dia Ductile Iron pipe, with spigot and socket ends suitable for push on rubber joint centrifugally cast Class “K-9” inner side cement lining and outer side black bitumen coating laid in trenches including push on rubber (EPDM) ring with ISI marked complete all as specified and directed. .

Supply & fixing of ductile iron pipe fittings / special suitable for flange, spigot & socket ductile pipe as per IS 9523/2000 of class K-12, PN-10 upto 150 mm dia complete all as specified and directed.

Supplying and fixing flanged Cast Iron Air release Valves with two air Outlets, 150 mm dia bore and fixing Up in cast iron water supply mains complete all as specified and directed. .

Supplying and fixing flanged Cast Iron Air release Valves with two air Outlets, 100 mm dia bore and fixing Up in cast iron water supply mains complete all as specified and directed. .

Supply, install, testing and commissioning of centrifugal pump set mono block, electrically driven 3 ph, 415 volts, 'F' class insulation IP 55 protection completed with pumpset MS metal body, CI impeller with discharge 630 LPM & minimum head 100 mtr, suction and delivery size 100x100 mm including base frame and brass metal body footvalve 100 mm dia ISI mark dia, pressure guage 0 to 7 Kg/cm2, necessary electrical connections from starter to motor with 10 sqm copper conductor including foundations as per manufactures specifications complete all as specified and directed

Supply, install, testing and commissioning of centrifugal pump set mono block, electrically driven 3 ph, 415 volts, 'F' class insulation IP 55 protection completed with pumpset MS metal body, CI impeller with discharge 420 LPM & minimum head 100 mtr, suction and delivery size 100x100 mm including base frame and brass metal body footvalve 100 mm dia ISI mark dia, pressure guage 0 to 7 Kg/cm2, necessary electrical connections from starter to motor with 10 sqm copper conductor including foundations as per manufactures specifications complete all as specified and directed

Supply, install, testing and commissioning of booster pump set mono block type, electrically driven 3 ph, 415 volts, 'F' class insulation IP 55 protection completed with pumpset MS metal body, CI impeller with discharge 40 LPM & minimum head 160 mtr, including base frame and PVC/MS sheet to cover the pumpset from rain & dust, necessary electrical connections from starter to motor with 4 Sqmm PVC insulated and armoured copper conductor cable, including foundations as per manufactures specifications complete all as specified and directed.

Supply and fix PVC Tank of capacity 6000 Ltrs and laid on PCC staging 300mm above ground level complete all as specified and directed. Note: PCC shall be measured and paid separately.

Supply, install , testing and commissioning of Chemical Dozing System alongwith Injector with following specification with complete accessories like lead tubing, connecting ferrules, check valves etc all as specified and as directed with following specification:- (i) Preparation Tank: Capacity of not less than 170 Ltrs FRP dozing tank of size not less than 650mm x net height, 375mm + conical 300mm gross height with stand 100mm consisting of:- (a) Water inlet line. (b) Outlet with strainer, (c) Drain, (d) Overflow, (e) Conical bottom for sludge deposition, (f) Pot hole with cover, (g) Level gauge, (h) Agitator 120W, 900 RPM, 1 phase flange mounted motor with plastic shaft and impeller. (ii) Service Tank : Capacity of not less than 100 Ltr of FRP dozing tank of top dia not less than 540mm x bottom dia 480mm x height 575mm consisting of :- (a) Water inlet line, (b) Outlets with Y strainer, (c) Drain, (d) Overflow, (e) Level gauge, (f) Agitator 120W, 900 RPM, 1 Phase flange mounted motor with plastic shaft and impeller, (g) Inspection port, (h) Provision of mounting pump on lid/wall. (iii) Dozing Pump/Injector: Maximum pressure 4 Kg/cm² and max flow rate 6 litre/hr. (Note: (i) Dosing system suitable for sodium hypochlorite solution. (ii) The dosing will be accomplished at the settling tank before discharge of treated waste water to environment.

M&L for drilling of trail bore of size 250 mm dia upto 200mtr depth below ground at given site perfectly vertical with reverse rig circulation method by direct rotary mechanical system or any latest technology through any type of soil strata of the layers, including hard stone /boulders etc to the complete depth including submitting the strata details duly graphically recorded for injection well in any type of soil strata including hard stone/boulders including disposal of soil from the site complete all as specified & as directed.

M&L for drilling of trail bore of size 250 mm dia from 200mtr to 400mtr depth below ground at given site perfectly vertical with reverse rig circulation method by direct rotary mechanical system or any latest technology through any type of soil strata of the layers, including hard stone /boulders etc to the complete depth including submitting the strata details duly graphically recorded for injection well in any type of soil strata including hard stone/boulders including disposal of soil from the site complete all as specified & as directed.

Shifting of T&P to site and back for and including Electric logging of bore for precise delineation of granular zones & also the quality of ground water including report interpretation complete all as specified & as directed. NOTE:- Electric logging shall be carried out by any agency approved by Govt

Supplying and assembling including jointing, lowering & fixing in position ERW casing pipe fine cut of internal dia 200 mm bore of thickness 6.35mm conforming to IS 4270-2001 or IS 3589 (ISI marked), screwed, socketed including jointing of pipe by necessary electric arc welding with 04 Nos stiffners of flat iron 40 x 6mm thick, 300 mm long both sides. The pipe shall be duly painted with anti-corrosive paint suitable for drinking water purpose complete all as specified & directed by Engr-in-Charge.

Supplying and assembling including jointing, lowering & fixing in position ERW casing pipe fine cut of internal dia 150 mm bore of thickness 6.35mm conforming to IS 4270-2001 or IS 3589 (ISI marked), screwed, socketed including jointing of pipe by necessary electric arc welding with 04 Nos stiffners of flat iron 40 x 6mm thick, 300 mm long both sides. The pipe shall be duly painted with anti-corrosive paint suitable for drinking water purpose complete all as specified & directed by Engr-in-Charge.

Supply lowering and fixing/ jointing 150 mm bore low carbon galvanised (LCG) strainer min 6.35 mm thickness each conforming to IS 8110:2000 including mild steel socket threaded/ by electric arc welding both sides all as specified and directed with aperture 0.75 mm to 1 mm as per requirement. Note for item No 399 to 401: Pipes shall be of length ~ 6 m unless required in smaller lengths as per borewell requirement.

M&L for MS Taper reducer of 200 x 150 mm made out of 10 mm thick sheet with and including socket threaded as per IS 226: 1975 and by electric arc welding both sides complete all as specified and as directed.

Supply and fixing bail plug of 150 mm internal dia threaded of minimum thickness 6.35 mm and 3 mtr long made up of mild steel and continuous welded by electric arc welding at both ends complete all as specified as per IS 226: 1975 and directed.

Material and labour for packing pea graval 3 to 5 mm (or as per Geologist report) of size as per IS of natural shape brought directly from river bed duly screened and packing around the casing pipe of MS to entire depth of tubewell upto ground level complete all as specified & as directed.

Supply and fixing well cap as per IS 226 : 1975 suitable for 200 mm bore housing pipe made out of 6 mm thick steel plate complete all as specified and directed. NOTE : After completion of the work well cap will be used to keep the bore well closed until the submersible pumping set is installed.

M&L for development of tube well with air compressor as per IS 11189-1985 of suitable capacity till sand/mud free water of potable quality is obtained & to achieve minimum discharge capacity of 36000 LPH /max yield or as directed by GE (Compressor with accessories & tube etc. shall be arranged by the contractor) complete all as specified & as directed.

Development of tube well as per IS 11189: 1985 by over pumping 25% using suitable size/type pump after completion of item above, including yield testing for both tube well as per IS 2800-2 1979. NOTE :- Yield test of both bore well shall be carried out in the presence of rep of Accepting Officer.

Supply only strata sample box with glass cover 3mm thick having internal dimension 1000x600x100mm made out of 20mm thick wrought Ist class hard wood with hinges, hasp and staple including polishing complete with samples at various depth evenly 2 mtr interval met in boring including lithological log strata chart in duplicate all as directed and specified. Note : The contractor should also make and provide a record of discharge, draw down and depth to water level duly recorded in duplicate for official information and record.

M&L for sanitary sealing of tube well with PCC (1:2:4) type B1 of suitable size using 20 mm graded aggregate of size 1mx1mx1m with embedded gravel feed pipe of GI medium grade 80 mm bore, 2 m long with cap complete all as specified and as directed

Testing of raw water & treated water from approved Govt lab for potability by doing chemical (specially for iron (Fe, fluroide (F) and arsenic (As)) and bacteriological analysis as per norms of WHO and submission of test reports to the entire satisfaction of Engineer-in-Charge.

S&F mild steel well clamp suitable for 200 mm dia MS column pipe made out of 12 mm thick MS plate fabricated to shape, including drilling holes, nuts, bolts, washers etc complete all as specified as per IS 226: 1975 complete all as specified and as directed

S&F centering guide suitable for 150 mm dia screen pipe with sizes as per IS 2800 Part I complete all as specified and as directed

Material & Labour for PVC insulated sheathed waterproof flat submersible cable 3 core 6 Sqmm complete all as specified and as directed

Supply & laying galvanized steel tubing "Heavy grade" of size 50 mm bore with long GI sockets and GI fittings in borewell all as specified & directed by EIC.

Fixing cost for MS reducer , bail plug , well cap, MS strip for centering , MS Iron clamps, electric logging and sample strata box complete all as specified and as directed

Water test analysis (chemical & biological) for bore well instalation conforming to relevant IS Codes complete all as specified and as directed

Supply, installation, testing and commissioning of 2.0 Ton capacity chain pully block with 6 mt chain and all acessories all as per detailed specifications and direction of engineer in charge

Supply and installation,testing and commissioning of indoor type VCB panel board (with 01 Incomer + 2 Outgoing) motorised as well as manually charged fully interlocked, horizontal draw-out type with ingress protection rating IP4X, floor mounted, 11 KV, 3 Ph, 50 Hz AC supply system, indoor metal clad type, factory built fabricated out of 2mm thick CRCA sheet steel and extensible on either sides, free standing, floor mounted type VCB Switchgear panel shall be with horizontal isolation and horizontal draw out type Vaccum Circuit Breaker, Aluminium busbar capacity not less than 800 Amps, pre wired for controller & acessories using copper conductor, provision for cable entry / outgoing system complete and comprising of the following:- (i) HT Vacuum Circuit Breaker switch gear of working voltage 11 KV, Current rating 800 Amps, 3 Phase, 50 Hz Ac supply, breaking capacity 25 KA for 3 seconds at rated voltage making capacity 65.75 KA at rated voltage, impulse withstand voltage 75KVp, Min. power frequency withstand voltage 28 KV, closing & shunt trip coils suitable for 110V DC, etc from power pack of suitable capacity. (ii) Numerical relay REJ 601 or equivalent model for E/F, O/L and short circuit fault including antipumping operation and accordingly trip coil operations. (Make : Seimens/Alstom/ABB) (iii) Alarm annunciator for DC supply fail/trip. (iv) Multifunction meter 3 Ph, 4 wire, CL-1 with RS485 Port (digital flush mounted typy) to indicate various parameters incl Current, Voltage, KVA, Demand, KW, PF, Frequency, etc. (v) LED indicator lamp for RYB, phase healthy, breaker ON/OFF, trip circuit healthy, spring charged.Breaker control switch. (vi) Push button for check trip healthy & emergency trip. (vii) Switch for closing/tripping of VCB. (viii) CTs with ratio 200/100/5-5 Amps (Accuracy class-1, 10 VA for metering, 5 P10, 15 VA for protection. (ix) PTs (3P/3L Drawout, 11KV/RT3/110V/RT3 Core-1-50VA, CL-1) shall be provided on the incoming side and the PT shall be mounted independently on a seperatre drawout type trolley with HT fuses. (x) Inbuilt Power pack of suitable capacity with I/P voltage 220V AC & O/P voltage 110V DC for protection relay operation with capcity calculation details with min waranty of 2 years. (xii) Other standard accessories shall be of reputed make as specified by the manufacturer. Note: (i) CT and PT to be provided in incoming VCBs only. (ii) CT tobe provided in all the out going VCBs only. (iii) VCB and the HT Panel should be of the same Make.

Supply and fixing glass fibre reinforced UV protected polycabonate Cable junction box IP 66, weather proof for mounting on the street light pole of size 205x255x112mm including flat iron iron (25x4mm) clamps to fix with tubular pole complete alongwith bolts and nuts with 01 No 5 way ELMEX terminal suitable for 10 sqmm to 25 sqmm cable complete with knockouts for cable entry - Black colour complete all as specified and directed

Supply , fixing ,Testing and commisioning of 16M high mast shaft in two sections suitable for 55m/sec wind speed, with raising lowering system comprising, head frame, luminaries carriage suitable to install 08 Nos luminaries in symmetrical arrangement, drum winch, 5mm diameter SS wire rope, trailing cable,connector, integral power tool motor, manual handle, junction box, lightening finial including Supply & fixing of foundation bolts manufactured from special steel along with nuts, washers, anchor plate and common template. ERECTION PART : Construction of suitable foundation with M20 grade concrete for the highmast considering the safe soil bearing capacity at site as 10 T/sqm at 2 metre depth with all materials and labour. Erection of the high mast with the help of suitable tools and plants WIRING PART : wiring of luminaires with all wiring materials like PVC insulated PVC sheathed flexible cable of suitable copper conductor cores of 1.5 sqmm, lugs, MCB and labour. Provision of GI pipe earthing for High mast with 2.5 M long 40 mm dia GI Pipe including connection to High mast earth terminal with 25 x 3 mm GI flats with all materials and labour- 02 Nos. including Installation of the mast feeder pillar by grouting the stand in concrete. The Lightning Items as under (a) Supply of LED type single dome aviation obstruction light - 01 Nos. (b) Supply, Install and testing of outdoor stand mounted feeder pillar with 32A TPN MCB incomer, single dial time switch, 25A TP contactor for the automatic switching of luminaries, power tool control with 2 Nos 9A contactors and raise lower push button, Incoming 35 sqmm and out going 16 & 2.5 sqmm terminals including installation of the mast feeder pillar by grouting the stand in concrete. Specification For Item as under Height of mast : 16 Meter, No. of sections : Two Material construction : S 355 grade as per BS-EN10 025 Base dia. and top diameter (A/F) :360mm and 150mm Plate thickness :3mm Cross section of Mast : 20 side polygon.

ITEM NO 422 Cont... Standard for galvanisation : As per BS EN ISO 1461 Size of opening and door at base : 1050 x 225 mm Diameter of base plate : 520 mm Thickness of base plate : 25 mm Lightning protection finial : G.I single spike of length 1200 mm Max.wind speed : 55m/s as per IS : 875 (Part - III) Number of foundation bolts : 06 nos. PCD of foundation bolts : 445 mm Type / diameter / length of foundation bolts : TS 600 / 24 mm dia / 850 mm long LUMINAIRES CARRIAGE Material of construction : 40 NB ERW Class B - M. S. Pipe Diameter of carriage ring (mm) : 450 mm (ID) Construction : 8 Arm, Welded, 2 sections Load carrying capacity : 8 Luminaire TRAILING CABLE Conductor : Copper, 5 core, 2.5 sqmm Insulation : PVC flexible No. of circuits per mast : One no. cable per mast WINCH / POWER TOOL Type / SWL of winch : Double drum, SWL 350 Kg Method of operation : Integral Motor Motor capacity : 0.75 HP No of speeds : 6 Pole, Single speed STAINLESS STEEL WIRE ROPE Grade / construction : AISI 304, 7/19 construction, Number of ropes : Two continuous, Diameter (mm) : 5 mm, Breaking load capacity : 1450 kg x 2

Supplying & fixing of high mast light fixture 1x 120 W LED Flood light fitting suitable for highmast lighting with in built electronic driver with surge protection upto 4 KV , high grade extruded aluminium housing (IP66) with high grade corrosion resistence powder coating for excellent durability , high efficiency lense for excellent light distribution and its wiring with 2x2.5 sqmm PVC insulated copper wire and 14 gauge bare copper earth wire from junction box complete all as specified and as directed

Supply & fixing 45W LED street light fitting with pressure die-cast housing with toughened glass and individual LEDs with secondary optics and IP 66 protection. complete all as specified and as directed

Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4 core XLPE, armoured, aluminium conductor cable, Indoor/Outdoor type for the size 25 to 50 sqmm complete all as specified and as directed

Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4 core XLPE, armoured, aluminium conductor cable, Indoor/Outdoor type for the size 70 to 95 sqmm complete all as specified and as directed

Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4 core XLPE, armoured, aluminium conductor cable, Indoor/Outdoor type for the size120 to 150 sqmm complete all as specified and as directed.

Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4 core XLPE, armoured, aluminium conductor cable, Indoor/Outdoor type for the size 185 to 240 sqmm complete all as specified and as directed

Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4 core XLPE, armoured, aluminium conductor cable, Indoor/Outdoor type for the size 300 to 400 sqmm complete all as specified and as directed.

Supply and fix cable route indicator oval shaped of size 200x150x6mm thick made out of Cast Iron with letter embossed as "HT UG Cable" or "LT UG Cable" fixed to 25x25x6mm mild steel angle iron 450mm long embedded in PCC block of size 200x200x200mm in PCC 1:3:6 type C1 using 20mm graded stone aggregate and including painting two coats of synthetic enamel paint over a coat of redoxide zinc chrome primer on exposed steel surfaces complete all as specified and as directed

Supply, install, test and commisioning of factory fabricated LT panel, indoor type mounted on 50 mm x 50 mm x 6 mm thick angle iron frame, cubicle modular made out of 2.00 mm thick CRCA sheet with epoxy powder coated after dip coated primer manual type control, rust proof, structural RAL 7032, 6 mm thick fibre sheet for mounting MCB's/ MCCBs and other accessories, earth bus strip etc & connection with existing PVC/XLPE insulated cable with provision of joints, Lugs, glands etc all as specified & directed and consisting of the following including necessary PCC work for foundation excavation & earthwork etc complete, suitable for operation 3 Phase, 4 wire , 440 volt, 50 Hz AC system & consisting of following accessories complete all as specified & as directed.:-(a) Aluminium bus bar 600 Amps rating, 4 Pole, 415 volts, TPN, colour coated with PVC/epoxy insulation & mounted insulator - 1 set of TPN (RYBN) (b) RYB Phase indicator LED type with protection MCB - 1 set (c) CRCA sheet chamber for bus bar, MCCB/ MCB, and other accessories etc complete(d) MCCB 4 Pole with thermal-magnetic release, 250 Amps TPN, 25 KA, 415 volt, AC, 50 Hz with necessary connection control wiring & accessories etc complete all as specifed & directed -1 No (incoming) (e) MCCB, 415 Volts, 100 Amps, 16 KA, AC, 50 Hz, 3 Pole,TP with thermal & magnetic setting including necessary connections - 2 No's (outgoing)(f) MCCB, 63 Amps, 16 KA, TP, 3 Pole (relay range 30-63) complete with earth fault protection - 5 No's (outgoing) (g) MCCB, 32 Amps, 16 KA, TP, 3 Pole, (relay range 20-32) complete with earth fault protection - 2 No's (Outgoing) (h) Change Over Switch suitable for AMF Panel (Auto matic transfer switch) Rating 160 Amps - 01 No(j) Digital multifunction meter with all electrical parameters like V,A,F,PF,KW,KVA,KWh, etc. - 1 No.(k) Control wiring with FR grade PVC insulated copper cable of suitable rating with necessary CTs & locking arrangement with DC panel lock Note : Panel shall be IP 54 Class CPRI approved and contractor shall submit CPRI Test Certificate to the Engineer-in-Charge

Supply, install, test and commisioning of factory fabricated LT panel, outdoor type mounted on 50 mm x 50 mm x 6 mm thick angle iron frame, cubicle modular made out of 3.15 mm thick CRCA sheet with epoxy powder coated after dip coated primer manual type control, rust proof, structural RAL 7032, 6 mm thick fibre sheet for mounting MCB/MCCB's and other accessories, earth bus strip etc & connection with existing PVC/XLPE insulated cable with provision of joints Lugs gland etc all as specified & directed and consisting of the following including necessary PCC work for foundation excavation & earthwork etc complete, suitable for operation 3 Phase, 4 wire , 440 volt, 50 Hz AC system & consisting of following accessories complete all as specified & as directed.:-(a) Aluminium bus bar 800 Amps rating, 4 Pole, 415 volts, TPN, colour coated with PVC/epoxy insulation & mounted insulator - 1 set of TPN (RYBN) (b) RYB Phase indicator LED type with protection MCB - 1 set (c) CRCA sheet chamber for bus bar, MCCB/ MCB, and other accessories etc complete(d) MCCB 4 Pole with thermal-magnetic release, 400 Amps TPN, 36 KA, 415 volt, AC, 50 Hz with necessary connection control wiring & accessories etc complete all as specifed & directed -1 No (incoming) (e) MCCB, 415 Volts, 315 Amps, 25 KA, AC, 50 Hz, 3 Pole,TP with thermal & magnetic setting including necessary connections - 1 No (outgoing)(f) MCCB, 415 Volts, 125 Amps, 16 KA, AC, 50 Hz, 3 Pole,TP with thermal & magnetic setting including necessary connections - 1 No (outgoing)(g) MCCB, 415 Volts, 100 Amps, 16 KA, AC, 50 Hz, 3 Pole,TP with extended terminal with thermal & magnetic setting including necessary connections - 1 No (outgoing) (h) MCCB, 63 Amps, 16 KA, TPN, 4 Pole (relay range 30-63) complete with earth fault protection - 3 No's (outgoing) (i) Digital multifunction meter with all electrical parameters like V,A,F,PF,KW,KVA,KWh, etc. - 1 No.(k) Control wiring with FR grade PVC insulated copper cable of suitable rating with necessary CTs & locking arrangement with DC panel lock Note : Panel shall be IP 65 Class CPRI approved and contractor shall submit CPRI Test Certificate to the Engineer-in-Charge

Supply, install, test and commisioning of factory fabricated LT panel, outdoor type mounted on 50 mm x 50 mm x 6 mm thick angle iron frame, cubicle modular made out of 3.15 mm thick CRCA sheet with epoxy powder coated after dip coated primer manual type control, rust proof, structural RAL 7032, 6 mm thick fibre sheet for mounting MCB/MCCB's and other accessories, earth bus strip etc & connection with existing PVC/XLPE insulated cable with provision of joints Lugs gland etc all as specified & directed and consisting of the following including necessary PCC work for foundation excavation & earthwork etc complete, suitable for operation 3 Phase, 4 wire , 440 volt, 50 Hz AC system & consisting of following accessories complete all as specified & as directed.:-(a) Aluminium bus bar 800 Amps rating, 4 Pole, 415 volts, TPN, colour coated with PVC/epoxy insulation & mounted insulator - 1 set of TPN (RYBN) (b) RYB Phase indicator LED type with protection MCB - 1 set (c) CRCA sheet chamber for bus bar, MCCB/ MCB, and other accessories etc complete(d) MCCB 4 Pole with thermal magnetic release, 400 Amps TPN, 36 KA, 415 volt, AC, 50 Hz with necessary connection control wiring & accessories etc complete all as specifed & directed -1 No (incoming) (e) MCCB, 415 Volts, 200 Amps, 25 KA, AC, 50 Hz, 3 Pole,TP with thermal & magnetic setting including necessary connections - 1 No (outgoing) (f) MCCB, 415 Volts, 150 Amps, 16 KA, AC, 50 Hz, 3 Pole,TP with thermal & magnetic setting including necessary connections - 1 No (outgoing) (g) MCCB, 415 Volts, 125 Amps, 16 KA, AC, 50 Hz, 3 Pole,TP with thermal & magnetic setting including necessary connections - 1 No (outgoing)(h) MCCB, 415 Volts, 100 Amps, 16 KA, AC, 50 Hz, 3 Pole,TP with thermal & magnetic setting including necessary connections - 2 No (outgoing) (j) MCCB, 63 Amps, 16 KA, TP, 3 Pole (relay range 30-63) complete with earth fault protection - 3 No's (outgoing) (k) MCCB, 40 Amps, 16 KA, TP, 3 Pole (relay range 30-63) complete with earth fault protection - 1 No (outgoing) (l) Digital multifunction meter with all electrical parameters like V,A,F,PF,KW,KVA,KWh, etc. - 1 No.(m) Control wiring with FR grade PVC insulated copper cable of suitable rating with necessary CTs & locking arrangement with DC panel lock Note : Panel shall be IP 65 Class CPRI approved and contractor shall submit CPRI Test Certificate to the Engineer-in-Charge

Supply, install, test & commissioning of factory fabricated outdoor LT Feeder piller panel weather & vermin proof IP 65 Class double door totally enclosed on 40 mm x40 mmx 6 mm thick angle iron frame, Cubicle modular made out of 3.15 mm thick CRCA sheet with epoxy powder coated dip coated primer, manual type control rust proof structural RAL 7032, 6mm thick fiber sheet for mounting MCB/MCCB's and other accessories earth bus strip etc & with all interconnections, risers, internal wiring, labels, terminal blocks etc. complete as required and connection with existing PVC/XLPE insulated cable with provision of joints, lugs, gland, etc all as specified & directed and consisting of the following including necessary PCC work for foundation excavation & earthwork etc complete., suitable for operation 3 Phase, 4 wire, 440 volt, 50 Hz, AC system & consisting of following accessories:- Incoming: 1 No. of 100 Amp 4P MCCB of 16 KA Breaking capacity.Metering for incoming: Digital VAF + PF meter, Cl 1 flush mounting type with CTs as required.RYB Phase indicator LED type with protection MCB - 01 SetBus Bars:Electrolytic high conductivity Aluminium three phase and neutral busbars rated at 400 Amps, insulated with heat shrinkable coloured PVC sleeves & clip on shrouds for joints.Outgoing:06 Nos. 25 A TP MCCB of 16 KA breaking capacity 03 Nos. 16 A TP MCB of 10 KA breaking capacity.

Supply, install, test & commissioning of factory fabricated outdoor LT Feeder piller panel weather & vermin proof IP 65 Class double door totally enclosed on 40 mm x40 mmx 6 mm thick angle iron frame, Cubicle modular made out of 3.15 mm thick CRCA sheet with epoxy powder coated dip coated primer, manual type control rust proof structural RAL 7032, 6mm thick fiber sheet for mounting MCB/MCCB's and other accessories earth bus strip etc & with all interconnections, risers, internal wiring, labels, terminal blocks etc. complete as required and connection with existing PVC/XLPE insulated cable with provision of joints, lugs, gland, etc all as specified & directed and consisting of the following including necessary PCC work for foundation excavation & earthwork etc complete., suitable for operation 3 Phase, 4 wire, 440 volt, 50 Hz, AC system & consisting of following accessories:- Incoming:1 No. of 315 Amp 4P MCCB of 25 KA Breaking capacity.Metering for incoming:Digital VAF + PF meter, Cl 1 flush mounting type with CTs as required.RYB Phase indicator LED type with protection MCB - 01 Set Bus Bars:Electrolytic high conductivity Aluminium three phase and neutral busbars rated at 600 Amps, insulated with heat shrinkable coloured PVC sleeves & clip on shrouds for joints. Outgoing : (a)01 No. 200 A TP MCCB of 25 KA breaking capacity. (b)4 Nos 40 A TP MCCB of 16 KA breaking capacity (c)08 Nos. 25 A TP MCCB of 16 KA breaking capacity (d)03 Nos. 10 A TP MCCB of 16 KA breaking capacity

Supply, install, test & commissioning of factory fabricated outdoor LT Feeder piller panel weather & vermin proof IP 65 Class double door totally enclosed on 40 mm x40 mmx 6 mm thick angle iron frame, Cubicle modular made out of 3.15 mm thick CRCA sheet with epoxy powder coated dip coated primer, manual type control rust proof structural RAL 7032, 6mm thick fiber sheet for mounting MCB/MCCB's and other accessories earth bus strip etc & with all interconnections, risers, internal wiring, labels, terminal blocks etc. complete as required and connection with existing PVC/XLPE insulated cable with provision of joints, lugs, gland, etc all as specified & directed and consisting of the following including necessary PCC work for foundation excavation & earthwork etc complete., suitable for operation 3 Phase, 4 wire, 440 volt, 50 Hz, AC system & consisting of following accessories:-Incoming:1 No. of 150 Amp 4P MCCB of 16 KA Breaking capacity.Metering for incoming:(a) Digital VAF + PF meter, Cl 1 flush mounting type with CTs as required.(b)RYB Phase indicator LED type with protection MCB - 01 Set Bus Bars:Electrolytic high conductivity Aluminium three phase and neutral busbars rated at 400 Amps, insulated with heat shrinkable coloured PVC sleeves & clip on shrouds for joints. Outgoing :(a) 03 No. 63 A TP MCCB of 16 KA breaking capacity (b)05 Nos. 25 A TP MCCB of 16 KA breaking capacity (c) 13 Nos. 10 A TP MCB of 16 KA breaking capacity

Supply, install, test & commissioning of factory fabricated outdoor LT Feeder piller panel weather & vermin proof IP 65 Class double door totally enclosed on 40 mm x40 mmx 6 mm thick angle iron frame, Cubicle modular made out of 3.15 mm thick CRCA sheet with epoxy powder coated dip coated primer, manual type control rust proof structural RAL 7032, 6mm thick fiber sheet for mounting MCB/MCCB's and other accessories earth bus strip etc & with all interconnections, risers, internal wiring, labels, terminal blocks etc. complete as required and connection with existing PVC/XLPE insulated cable with provision of joints, lugs, gland, etc all as specified & directed and consisting of the following including necessary PCC work for foundation excavation & earthwork etc complete., suitable for operation 3 Phase, 4 wire, 440 volt, 50 Hz, AC system & consisting of following accessories:- Incoming:1 No. of 100 Amp 4P MCCB of 16 KA Breaking capacity.Metering for incoming:(a)Digital VAF + PF meter, Cl 1 flush mounting type with CTs as required.(b)RYB Phase indicator LED type with protection MCB - 01 Set Bus Bars:Electrolytic high conductivity Aluminium three phase and neutral busbars rated at 200 Amps, insulated with heat shrinkable coloured PVC sleeves & clip on shrouds for joints. Outgoing: (a)14 Nos. 10 A TP MCB of 16 KA breaking capacity (b)02 Nos. 32 A TP MCCB of 16 KA breaking capacity

Supply, install, test & commissioning of factory fabricated outdoor LT Feeder piller panel weather & vermin proof IP 65 Class double door totally enclosed on 40 mm x40 mmx 6 mm thick angle iron frame, Cubicle modular made out of 3.15 mm thick CRCA sheet with epoxy powder coated dip coated primer, manual type control rust proof structural RAL 7032, 6mm thick fiber sheet for mounting MCB/MCCB's and other accessories earth bus strip etc & with all interconnections, risers, internal wiring, labels, terminal blocks etc. complete as required and connection with existing PVC/XLPE insulated cable with provision of joints, lugs, gland, etc all as specified & directed and consisting of the following including necessary PCC work for foundation excavation & earthwork etc complete., suitable for operation 3 Phase, 4 wire, 440 volt, 50 Hz, AC system & consisting of following accessories:-Incoming (a)1 No 63 A FP MCCB, 16 KA service breaking capacity with heavy duty solid neutral link alongwith Earth fault relay and CBCT.(b)1 No ON Load Change over switch TPN 63 Amps,415 V. Metering for incoming:(a)Digital VAF + PF meter, Cl 1 flush mounting type with CTs as required.(b)RYB Phase indicator LED type with protection MCB - 01 Set Bus Bars 200 Amps TPN Aluminium Bus Bars of suitable length Bus bars shall be colour coded and insulated by heat shrinkable sleaves & clip on shrouds for joints.Outgoing : (a) 04 Nos. 25 A TP MCCB of 16 KA breaking capacity (b)04 Nos. 20 A TP MCB of 16 KA breaking capacity (c)01 No 3 Phase contactor (d)01 No Timer switch

Supply, install, test & commissioning of factory fabricated outdoor LT Feeder piller panel weather & vermin proof IP 65 Class double door totally enclosed on 40 mm x40 mmx 6 mm thick angle iron frame, Cubicle modular made out of 3.15 mm thick CRCA sheet with epoxy powder coated dip coated primer, manual type control rust proof structural RAL 7032, 6mm thick fiber sheet for mounting MCB/MCCB's and other accessories earth bus strip etc & with all interconnections, risers, internal wiring, labels, terminal blocks etc. complete as required and connection with existing PVC/XLPE insulated cable with provision of joints, lugs, gland, etc all as specified & directed and consisting of the following including necessary PCC work for foundation excavation & earthwork etc complete., suitable for operation 3 Phase, 4 wire, 440 volt, 50 Hz, AC system & consisting of following accessories:- Incoming (a)1 No 63 A FP MCCB, 16 KA service breaking capacity with heavy duty solid neutral link alongwith Earth fault relay and CBCT.(b)1 No ON Load Change over switch TPN 63 Amps,415 V. Metering for incoming:(a)Digital VAF + PF meter, Cl 1 flush mounting type with CTs as required.(b)RYB Phase indicator LED type with protection MCB - 01 Set Bus Bars 200 Amps TPN Aluminium Bus Bars of suitable length Bus bars shall be colour coded and insulated by heat shrinkable sleaves & clip on shrouds for joints.Outgoing : (a)02 Nos. 25 A TP MCCB of 16 KA breaking capacity (b)05 Nos. 20 A TP MCB of 16 KA breaking capacity (c)01 No 3 Phase contactor (d)01 No Timer switch

Supply, install, test & commissioning of factory fabricated outdoor LT Feeder piller panel weather & vermin proof IP 65 Class double door totally enclosed on 40 mm x40 mmx 6 mm thick angle iron frame, Cubicle modular made out of 3.15 mm thick CRCA sheet with epoxy powder coated dip coated primer, manual type control rust proof structural RAL 7032, 6mm thick fiber sheet for mounting MCB/MCCB's and other accessories earth bus strip etc & with all interconnections, risers, internal wiring, labels, terminal blocks etc. complete as required and connection with existing PVC/XLPE insulated cable with provision of joints, lugs, gland, etc all as specified & directed and consisting of the following including necessary PCC work for foundation excavation & earthwork etc complete., suitable for operation 3 Phase, 4 wire, 440 volt, 50 Hz, AC system & consisting of following accessories:- Incoming 1 No 63 A FP MCCB, 16 KA service breaking capacity with heavy duty solid neutral link alongwith Earth fault relay and CBCT.Metering for incoming:(a)Digital VAF + PF meter, Cl 1 flush mounting type with CTs as required.(b)RYB Phase indicator LED type with protection MCB - 01 Set Bus Bars 200 Amps TPN Aluminium Bus Bars of suitable length Bus bars shall be colour coded and insulated by heat shrinkable sleaves & clip on shrouds for joints.Outgoing :(a) 06 Nos. 20 A TP MCB of 16 KA breaking capacity (B)01 No 3 Phase contactor (c)01 No Timer switch

Supply, install, test & commissioning of factory fabricated Busbar panel out door type mounted on 40 mm x40 mmx 6 mm thick angle iron frame, Cubicle modular made out of 3.15 mm thick CRCA sheet with epoxy powder coated dip coated primer, manual type control rust proof, 400 Amps Aluminium busbar and other accessories & connection with existing PVC/XLPE insulated cable with provision of joints, lugs, gland, etc all as specified & directed and consisting of the following including necessary PCC work for foundation excavation & earthwork etc complete., suitable for operation 3 Phase, 4 wire, 440 volt, 50 Hz, AC system complete all as specified and as directed.

Supply and fix Microprocessor based three phase electrronic tamper proof HT metering with optical communication port, accuracy class 0.5 rating 3 x 110 V, 1/5A conforming to IS: 13779 enclosed in MS sheet enclosure made out of 3.15 mm thick CRCA sheet with epoxy powder coated after dip coated primer manual type control, rust proof and other accessories & connecting complete all as specified and as directed

Supply and installation of 11 KV, single phase, out door oil cooled CT/PT combination with CT of ratio 400/55 Amp, class 1.0 / 5P10, burden 15 VA and PT of ratio 11 KV/rt3/110V/rt3/110V/ rt3, class 0.5-3, Burden 50 VA - 50 VA including other accessories & connecting complete all as specified and as directed

Supply and fix LED Post Top Light fitting 40W, made in cast aluminium with decorative opal polycarbonate diffuser with IP65 protection complete all as specified and directed by Engr-in-charge.

Supply and installation of High intensity, energy saving, long range, directional controlled, manually swiveble, LED search light, beam range >700 meters, 1x300W in multi circuit SMD LED, Effciency > 100 lm/w, PF>0.95, CCT 5500K - 6500K, Optical grade PMMA-PC lens, anti-UVoxidation, narrow beam 8 degree, die cast LM6 body with air fins, fully powder coated, working voltage 100 - 300v, 50Hz, constant current, reflector / lens efficiency > 90%, minimum lux level at 10meter - 6000 with circle of approx 500mm,IP-66, conforming to LM79, LM80, IS:10322 / BIS. The above search - light to be installed on "UDCA" stand (1 Meter above from roof) & the operating lever (Hydraulic) of UDCA shall be in shoulder height to enable to rotate the luminaire easily from inside of the watch tower at 3600 horizontally & 450 vertically with built-in locking knob. All bushes of UDCA shall be made by gun metal, hardware shall be in stainless steel and other metal parts would be Zinc electroplated / powder coated for outdoor installations and having 3 fountain poles at bottom complete all as specified and as directed

Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure complete all as specified and as directed

Supply, install, test and commisioning of factory fabricated LT panel, outdoor type mounted on 50 mm x 50 mm x 6 mm thick angle iron frame, cubicle modular made out of 3.15 mm thick CRCA sheet with epoxy powder coated after dip coated primer manual type control, rust proof, structural RAL 7032, 6 mm thick fibre sheet for mounting MCB/MCCB's and other accessories, earth bus strip etc & connection with existing PVC/XLPE insulated cable with provision of joints Lugs gland etc all as specified & directed and consisting of the following including necessary PCC work for foundation excavation & earthwork etc complete, suitable for operation 3 Phase, 4 wire , 440 volt, 50 Hz AC system & consisting of following accessories complete all as specified & as directed.:-(a) Aluminium bus bar 1000 Amps rating, 4 Pole, 415 volts, TPN, colour coated with PVC/epoxy insulation & mounted insulator - 1 set of TPN (RYBN) (b) RYB Phase indicator LED type with protection MCB - 1 set (c) CRCA sheet chamber for bus bar, MCCB/ MCB, and other accessories etc complete(d) MCCB 4 Pole with thermal magnetic release, 630 Amps TPN, 36 KA, 415 volt, AC, 50 Hz with necessary connection control wiring & accessories etc complete all as specifed & directed -1 No (incoming) (e) MCCB 4 Pole with thermal magnetic release, 400 Amps TP, 36 KA, 415 volt, AC, 50 Hz with necessary connection control wiring & accessories etc complete all as specifed & directed -1 No (outgoing) (f) MCCB 4 Pole with thermal magnetic release, 200 Amps TP, 25 KA, 415 volt, AC, 50 Hz with necessary connection control wiring & accessories etc complete all as specifed & directed -1 No (incoming) (g) MCCB, 415 Volts, 150 Amps, 16 KA, AC, 50 Hz, 3 Pole,TP with thermal & magnetic setting including necessary connections - 1 No's (outgoing)(h) MCCB, 415 Volts, 100 Amps, 16 KA, AC, 50 Hz, 3 Pole,TP with thermal & magnetic setting including necessary connections - 1 No (outgoing)(j) MCCB, 63 Amps, 16 KA, TP, 3 Pole (relay range 30-63) complete with earth fault protection - 1 No (outgoing) (k) Digital multifunction meter with all electrical parameters like V,A,F,PF,KW,KVA,KWh, etc. - 1 No.(l) Control wiring with FR grade PVC insulated copper cable of suitable rating with necessary CTs & locking arrangement with DC panel lock Note : Panel shall be IP 65 Class CPRI approved and contractor shall submit CPRI Test Certificate to the Engineer-in-Charge

Supply, install, test & commissioning of factory fabricated outdoor LT Feeder piller panel weather & vermin proof IP 65 Class double door totally enclosed on 40 mm x40 mmx 6 mm thick angle iron frame, Cubicle modular made out of 3.15 mm thick CRCA sheet with epoxy powder coated dip coated primer, manual type control rust proof structural RAL 7032, 6mm thick fiber sheet for mounting MCB/MCCB's and other accessories earth bus strip etc & with all interconnections, risers, internal wiring, labels, terminal blocks etc. complete as required and connection with existing PVC/XLPE insulated cable with provision of joints, lugs, gland, etc all as specified & directed and consisting of the following including necessary PCC work for foundation excavation & earthwork etc complete., suitable for operation 3 Phase, 4 wire, 440 volt, 50 Hz, AC system & consisting of following accessories:-Incoming:1 No. of 150 Amp 4P MCCB of 16 KA Breaking capacity.Metering for incoming:(a)Digital VAF + PF meter, Cl 1 flush mounting type with CTs as required.(b)RYB Phase indicator LED type with protection MCB - 01 Set Bus Bars:Electrolytic high conductivity Aluminium three phase and neutral busbars rated at 400 Amps, insulated with heat shrinkable coloured PVC sleeves & clip on shrouds for joints. Outgoing : (a)02 Nos. 25 A TP MCB of 16 KA breaking capacity (b)06 Nos. 20 A TP MCB of 16 KA breaking capacity (c)04 Nos. 10 A TP MCB of 16 KA breaking capacity

Supply, install, test & commissioning of factory fabricated outdoor LT Feeder piller panel weather & vermin proof IP 65 Class double door totally enclosed on 40 mm x40 mmx 6 mm thick angle iron frame, Cubicle modular made out of 3.15 mm thick CRCA sheet with epoxy powder coated dip coated primer, manual type control rust proof structural RAL 7032, 6mm thick fiber sheet for mounting MCB/MCCB's and other accessories earth bus strip etc & with all interconnections, risers, internal wiring, labels, terminal blocks etc. complete as required and connection with existing PVC/XLPE insulated cable with provision of joints, lugs, gland, etc all as specified & directed and consisting of the following including necessary PCC work for foundation excavation & earthwork etc complete., suitable for operation 3 Phase, 4 wire, 440 volt, 50 Hz, AC system & consisting of following accessories:- Incoming:1 No. of 400 Amp 4P MCCB of 36 KA Breaking capacity and other accessories for incoming:(a)Digital VAF + PF meter, Cl 1 flush mounting type with CTs as required.(b)RYB Phase indicator LED type with protection MCB - 01 Set Bus Bars:Electrolytic high conductivity Aluminium three phase and neutral busbars rated at 600 Amps, insulated with heat shrinkable coloured PVC sleeves & clip on shrouds for joints. Outgoing : (a)04 No. 63 A TP MCCB of 16 KA breaking capacity (b)10 Nos. 40 A TP MCCB of 16 KA breaking capacity(c)02 Nos. 20 A TP MCB of 16 KA breaking capacity (d)3 Nos. 10 A TP MCB of 16 KA breaking capacity

S & F GI 50mm dia medium grade for fixing post top lantern not less than 1.8mtr height including all accessories complete all as specified and as directed

Supply, install, testing and commissioning of Submersible pumpset, electric driven 415 V, TP suitable for 150 mm dia bore well with discharge 125 LPM & minimum head 100 mtr, necessary electrical connections as per manufactures specifications complete all as specified and directed by Engr-in-Charge.

Shree Gautam Construction Co. Ltd.

NCC LIMITED

Varindera Constructions Limited