Construction of conference hall and record room along with provision of furnishing for ADO office, Nilgiri

Dismantling and removing R.C.C. columns beams slab staircase landing lintels including stacking the useful materials for reuse and removing the debris within 50m lead.

(a) First Floor

Dismantling brick or stone masonry in cement mortar above 3m. height including stacking the useful materials for reuse and removing the debris within 50m. Lead

(a) First Floor

R.C.C. work M20 grade using 20mm.and down grade HBG crusher broken chips including hoisting,laying, cost,conveyance and royality of materials curing including centering and shuttering etc. complete as per direction of Engg-in-Charge in first floor.

(a) Lintel

(b) Column and beam

(c) Sun shade, loft and Chajja

(d) Roof Slab

(e) Stair

Supplying,fitting and placing uncoated HYSD bar reinforcement as per drawing and technical specification including cost,conveyance and all taxes of steel and binding wire etc.complete as per direction of Engg-in-Charge .

(a) First Floor

Brick work with Fly Ash .Bricks having crushing strength between 100kg/sq.cm to 149kg/sq.cm in c.m. 1:6 in Sup.Str. including cost conveyance and royality of materials curing etc. complete as per direction of Engg-in-Charge.

(a) First Floor

6mm. thick cement plaster (1:4) to R.C.C. surfaces finished smooth including closed deep chipping and slury treatment, cost , conveyance and royality of materials curing etc. complete as per direction of Engg-in-Charge.

(a) First Floor

16mm. thick cement plaster in c.m. 1:6 over brick masonry including cost conveyance and royality of materials curing etc. complete as per direction of Engg-in-Charge.

(a) First Floor

12mm. thick cement plaster in c.m. 1:6 over brick masonry including cost conveyance and royality of materials curing etc. complete as per direction of Engg-in-Charge.

(a) First Floor

2.5 cm thick grading concrete [1:2:2 ] on roof slab with 6 mm size chips including rubbing and polishing etc. complete including watering and curing with cost, conveyance, royaltiesand excluding GST of all materials with all labour and T&P required for the work etc. complete in all respect.

(a) First Floor

Fixing colour Vitrified tiles in floors (Printed Series) of size 600mm x600 mm of approved make conforming IS:13755 laid on 20 mm thick cement mortar (1:1)and filling joints with white cement of approved quality including cost of all materials, labour T&P etc rrequired for the work all completeas per direction of Engineer-in-charge.

(a) First Floor

Fixing Ceramic Glazed floor tiles in floors,treads or steps and landings on 25 mm thick CM (1:1) jointed with neat cement slurry mixed with pigments to match the shades includind cost for rubbing, polishing & cost of marbel tiles etc. complete as per direction of Engg-in-Charge.

(a) First Floor

Fixing Ceramic Glazed wall tiles in dados skirting and risers of steps on 12 mm thick cement plaster(1:3) jointed with neat cement slurry mixed with pigments to matche shade of the tiles including rubbing and polishing complete as per direction of Engineer-in-charge.

(a) First Floor

Finishing wall surface of walls with Acrylic wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials excluding GST, labour T&P etc complete.

(a) First Floor

Priming one coat to wall surface with water bound primer including cost, conveyance, excluding GST of all materials, labour and T&P etc. complete as per direction of Engg-in-Charge.

(a) First Floor

Finishing inside walls with Distemper of approved shade on new work two coats to give an even shade including watering and curing with cost, conveyance, royalties and excluding GST of all materials with all labour and T&P required for the work etc. complete in all respect.

(a) First Floor

Painting two coats with weather seal coat paint over a coat of primer with water bound cement paint including cost, conveyance, excluding GST of all materials, labour and T&P etc. complete.

(a) First Floor

Supplying ,fitting, fixing of factory made single leaf rigid FRP composite door shutter of 32mm thick,laminated with to GRP skins with wood grain finished fabricated using UV stabilized Isopthalic gal coat and one layer of 450 gsm E-glass chopped strand m

(a) First Floor

Supplying ,fitting, fixing of FRP door frame of size 75x100mm including drilling holes in masonary wall

(a) First Floor

Providing fitting fixing of decorative flushdoor made up of with 32mm thick phenol bounded BWR grade with decorative laminates of approved shade on both side fixed by synthetic adhesive & headless pins with all door accessory etc.

(a) First Floor

Supplying, fitting, fixing of window (sliding type) made of aluminum section 151-154, 151-55 as windows frame section No.151-155, 151-153 & 151-167 as shutter frame with 5mm thick black glass as panel fitted with rubber bending including locking arrangement including all fitting including cost of all materials excluding GST, labour, T&P etc. complete as per direction of Engineer-in-charge.

(a) First Floor

Supplying, fitting and fixing of powder coated M.S. collapsible gate/Window grill/Ventilator etc made out of M.S. square bar / M.S. flats / M.S. angles as per approved drawing and design, cutting to required size and welding properly, finished smooth and sand papering, including cost, conveyance, taxes of all materials, required screws, cost of all labour, T&P etc. as required for the work complete as per direction in all floors.

(a) First Floor

Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @0.90mtr. C/C and stainless square pipe barracking of size 32mm x 32mm x 2m min 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost, conveyance, excluding GST of all materials, labour, T&P etc. required for the complete in all respect.

(a) First Floor

Providing fitting and fixing at all height false ceilng of 12mm thick tapered edge gypsum board including providing and fixing of frame work made of from M.S sheet and galvanised in accordance with zinc coating 600 and consisting of angle cleats of sixe including fixing the gypsum board with ceiling sectional perimeter channels 0.5 mm thick 27mm high having flanges of 20mm and 30mm long. The primete of ceiling fixed to walkl/ partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive all screws 2230 mm interval including joinbting and fixing to a flush ficish of tapered and square edge of the gypsum board with recommended filler,paper tapes ficisher and two coats of primer suitable for gypsum board including the cost of painting.( No deductions have to be made for light opening.) complete in all respect as per directon of engineer in charge.

(a) First Floor

Providing fitting and fixing of decorative Gypsum cornice complete in all respect as per direction of engineer in charge.

(a) First Floor

Providing fitting and fixing of letters of signage for provision of display of office name with stainless steel letter head of size 6" complete in all respect.

Supply, fitting & fixing of window roller blinds by fixing power coated top channel,bottom channel with bottom end cap,control unit and good quality of 0.6mm thick fabric of approved design and quality complete as per direction of Engineer-in-charge.

(a) First Floor

Providing,fitting,fixing of conference table made up with 19 mm thick phenol bounded BWR grade ply wood & subsequently finished with 1 mm thick BWR grade decorative laminates of approved shade on required size/side over weeden frame fixed with raw plug including drilling of necessary holes fixed by synthetic adhesive and headless pins with all accessories etc. complete as per direction of engineer in charge.

(a) First Floor

Fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position etc all complete as per specification and direction of the Engineer in charge.

Fixing water closet, squatting pan (Indian type WC pan) conforming IS 2556: Part 3-2004 duly embedded in CC (1:4:8) using hard granite metal 40mm nominal size all complete as per specification

Providing and fixing PVC low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete.

Supplying all materils,labour, T&P fitting,fixing of Virtious China flat Wash basin over sizes 550 mm x 400 mm with hole for pillar taps conformoing to IS 2556 : Part 4-2004 with cast iron or M.S Brackets painted white cement including cutting holes in walls and making good the damages etc. All complite as per specificationand direction of the Engineer-in-charge.

Fixing PVC waste pipe of following nominal diameter for wash basin including brass check nut complete as per specification

Fixing Chromium Plated brass soap dish complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws as per specification

Fixing of pillar taps capstan head scew down high pressure lettered 'Hot' and 'Cold' with long screws, shanks and back nuts of following nominal sizes as per specification complete.

Fixing of Brass Screw-down Stop Cocks conforming to IS :781-1995 of the following nominal sizes as per specification complete.

Fixing of Brass Screw-down Bib Cocks (Taps) polished bright conforming to IS:781-1995 of the following nominal sizes as per specification complete.

Short body

Providing and fixing to wall or ceiling and floor pvc pipes class conforming to ASTM-D- 1785/89 (S-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification complete.

A. 15mm dia.

B. 20 mm dia.

C. 25 mm dia.

Fixing glazed squatting plate urinal conforming to IS:2556-part-6-1995 with integral logitudinal flushing pipe including embedding the plate in 25 mm CM (1:8) laid over 150 mm CC (1:4:8) using 40 mm hard granite metal all complete as per specification.

Fixing bowl pattern urinal conforming to IS 2556 : Part 6-1996 including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp etc all complete as per specification.

Supplying and fixing of following sizes of PVC conduit along with accessories in recessed wiring including cutting the wall and making good the same in case of recessed conduit as required.

Recessed wiring to submain in different sq. mm FR PVC insulated single core multistrand copper conductor of ISI marked in 20mm dia non-metallic PVC flexible conduit along with FR PVC insulated single core multistrand copper conductor as earth wire as required as per direction of Engg-in-charge. (Finolex/L&T/Anchor/Havels/V-Guard)

1 x 0.75 sq.mm

2 x 1.5 sq.mm

2 x 4 sq.mm

Supplying and fixing of 18 SWG modular GI box of following sizes (nominal size) on surface / recess with suitable size of phenolic laminated sheet cover in front including cutting the wall and making good the same in case of recessed conduit as required.

2 module 18 SWG

4 module 18 SWG

6 module 18 SWG

8 module 18 SWG

Supplying and fixing batten holder / BK angle holder ISI marked including connection etc. as required.

Supplying, fitting and fixing of modular switch of following types with ISI marked etc. complete in all respect as per direction of EIC.

5/6 amp one way modular switch

15/16 amp one way modular switch

Supplying and fixing of following 3 pin 5 /6 amps, modular socket outlet, ISI marked including connections etc as required.

Supplying and fixing of following 6 pin 15 /16 amps, modular socket outlet, ISI marked including connections etc as required.

Supplying and fixing of single pole MCB with sheet steel enclosure, distribution board on surface/recess complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, inter connection etc. complete as required.

Installation,testing and commissioning 15 w LED tube light including connection with 1.5 sqmm FR PVC insulated copper conductor and earthing as required as per direction of engineer in charge.( make of wire Finolex/ L & T /Anchor/Havels/V Guard.

Supply, fitting, testing & commissioning of 48'' A.C ceiling fan without reguletor incuging numbering of reputed mark incluging all connection(Make:-Usha-Striker Millenium/Crompton -jura/ Havells-Velopcity/ Spark/Anchor-XL/ Orient -Summer Pride/Polycab -Vital)

Supply & fitting of modular type ceiling fan regulator on the existing switch box including connetion with all complete as required.

Installation,testing and commissioning of Exhaust fan in the existing opening including making the holes to the size of the above fan,making good the damage complete connection etc. as required as per direction of engineer in charge. (make of wire Finolex/ L & T /Anchor/Havels/V Guard).

Installation,testing and commissioning of wall mounted fan including ,making good the damage complete connection etc. as required as per direction of engineer in charge.( make of wire Finolex/ L & T /Anchor/Havels/V Guard)

Installation,testing and commissioning 10 w LED ceiling light directly, as required as per direction of engineer in charge.( make of wire Finolex/ L & T /Anchor/Havels/V Guard)