REPAIRS TO COMPOUND WALLS AND FENCING INCLUDING PAINTING AT DIGLIPUR

Amount

Dismantling posts or struts (wood, steel or R.C.C.) any section embedded in concrete, brick work, masonry, etc., including taking out embedded portion and making good disturbed ground.

M&L for PCC Type D2, 1:4:8 (using 40mm graded granite stone aggregate) as in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and as directed.

M&L for providing reinforced cement concrete type B-1, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area not exceeding 100 Sq. cm, with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed.

M&L for high yield strength deformed TMT steel bars 10 mm dia and over as in reinforcement for concrete, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

M&L for high yield strength deformed TMT steel bars 5 mm to 10 mm dia cut to length, bent to shape required, as in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips.

S&F 10 mm dia mild steel round bars and cut to length, bend to shape fixing in flat angles with bolt conforming to Fe-410-W (Gde.E-250) quality-A.

S&F Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) including taking down old barbed wire complete.

S&F mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165.

S&F mild steel bolts of length not exceeding 15 cm and diameter of neck 10 mm, purpose made, with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut.

M&L preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified.

M&L for preparation of new or previously untreated steel surfaces of any description, not exceeding 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified.

Dismantling of brickwork or stone/ boulder masonry or PCC block masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removal of debris to a distance exceeding 500 mtrs and depositing where directed.

Demolition of RCC of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) and removal of debris to a distance exceeding 500 mts and depositing where directed.

M&L for RCC M-30 (design mix) (using 20mm graded crushed granite stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete.

M&L for RCC M-30 (design mix) (using 20mm graded crushed granite stone aggregate) as in columns, pillars, piers, posts and struts.

M&L for RCC M-30 (design mix) (using 20mm graded crushed granite stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span.

M&L for providing steel formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, for flat rough finished surfaces of concrete all as specified.

M&L for providing steel formwork to sides of pillars, posts, struts, piers, columns and stanchions, for flat fair finished surfaces of concrete all as specified.

M&L for providing steel formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for flat fair finished surfaces of concrete all as specified.

M&L Pre-cast cement concrete Type C1, 1:3:6 (using 20mm graded crushed granite stone aggregate), block masonry with solid blocks, exceeding 10 cm in width with minimum compressive strength of 50 Kg/ Sqcm and setting in cement mortar 1:6 complete.

M&L PCC Type B1, 1:2:4 (using 20 mm graded granite stone aggregate) as in copings, kneelers, apex stones, bed plates, levelling course, kerbs water troughs and the like including use of formwork, weathering, slightly rounded or chamfered angles and throating.

Taking down cement plaster on brick or stone walls, concrete surfaces etc. including raking out joints, hacking for key, scrubbing down with water, etc. and removal of debris to a distance exceeding 500 mtrs and depositing where directed.

M&L for rendering 15 mm thickness in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished fair and even complete.

M&L for preparing plastered or unplastered new surfaces of walls and applying three coats of white wash complete.

Dismantling fencing wire mesh, any type complete all as directed.

S&F 4mm dia, 75x75 mm size MS galvanised chain link fencing wire mesh with 1 mm thick PVC coating, including line wires, rails, straining bolts, etc. including provision of binding wire all as specified and directed. Note: Rails, straining bolts shall be measured and paid separately.

Dismantling structural steel work including doors, gates but excluding framed truss etc.

S&F mild steel framed work such as grills, gratings, hold fasts, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe290 Gde-E-165 including portions framed and hung as gate, pintle hinges, stops, hand-made sliding bolts etc complete all as specified.

MOHAMMED SAFIQUE

M/s Mohammed Shamim

RADHA GOVIND CONSTRUCTION

kakolil trade agencies

M/s S U Enterprises

LANDMARK ENGINEERS & CONSULTANTS