GE AF/AMB-39/2020-21 REPAIRS TO WOODEN FURNITURE AT SITES- II, III, IV, 260SU PATIALA AND AMBALA UNDER GE (AF) AMBALA

Amount

M&L for carrying out repair and replacement of the following under-mentioned parts of stool dressing by removing carefully the existing unserviceable / damaged parts and replacing with new parts/ components of required size and shape as under complete all as per drawing No. FD-382, as specified and as directed:

S&F of leg of size 45x45x370mm made out of 1st class hardwood teak

S&F of top long rail 50x25x450mm made out of 1st class hardwood teak

S&F of side rail bootom 50x25x300mm made out of 1st class hardwood teak

S&F of stiffiner 25x19x450mm made out of 1st class hardwood teak

M&L for carrying out repair and replacement of the following parts of chair dining cushioned by removing carefully the existing unserviceable / damaged parts and replacing with new parts/components of required size and shape as per drg to match with the existing including re-assembling as under complete all as per drawing No. FD-/E6/MAP/10, as specified and as directed:

S&F of cushion of standard size of 32 density covered with good quality tapestry cloth of approved tint, texture, type Note: Cost of tapestry cloth shall not be less than Rs. 210/m

S&F seat made out 12mm plywood commercial type of existing size

M&L for tightening of loose joints of complete chair with bamboo pins

S&F front legs of teak wood of existing size

S&F rear legs of teak wood of existing size

S&F side rails of teak wood of existing size

S&F stiffners of teak wood of existing size

M&L for carrying out repair/replacement of the following parts and supply & fix of new parts as under of trolly for TV as under complete all as per drawing No. FD-/E6/MAP/04(R), as specified and as directed:

S&F plain glass 5.5mm thick of standard size with good quality hinges and catcher

S&F swivel type caster wheel 50mm dia

S&F top of size 750x600mm made out of 18mm thick prelaminated particle board with 4mm thick PVC edging all around

M&L for carrying out repairs and replacement of the following parts of locker bed side wooden by removing carefully the existing unserviceable / damaged parts and replacing with new parts / components as per required size and shape to match with existing including re-assembling as under complete all as per drawing No. FD-222 & 54, as specified and as directed:

S&F door shutter made out of teak wood frame with 6mm thick one side teak veneer plywood duly french polished

S&F 6mm thick plywood commercial on back of existing size

S&F 6mm thick one side teak veneer plywood on both side duly french polished on sides of existing size

S&F 6mm thick one side teak veneer plywood on both side duly french ploish on top of existing size

Refixing of existing shelves using new hinges and screws of existing sizes

S&F in replacement of legs of size 50x50mm at top & 40mmx40mm at bottom of length made out of 1st HW (teak)

S&F aluminium hasp & staple 100mm size

S&F aluminium bow handle 150mm long

M&L for carrying out repair and replacement of the following parts of table 900x600x760mm (3x2') without drawer by removing carefully the existing unserviceable/damaged parts and replacing with new parts/components as per required size and shape to match with existing including re-assembling as under complete all as per drawing No. FD-233, 42, 231 & 55, as specified and as directed:

S&F leg of size 60x30x740mm high made out of 1st class HW (teak)

S&F stiffiner of size 25x40x600mm long made out of 1st class HW (teak)

S&F table top made out of 18/19mm thick plywood BRW grade of approved make confirming to IS with thick laminated sheet at top and 4mm thick teak wood edging all around the top and bottom side of the top shall be painted with a coat of white primer

S&F long rail of size 20x60x900mm long made out of 1st class HW (teak)

S&F short rail of size 20x60x600mm long made out of 1st class HW (teak)

M&L for removing carefully the existing unserviceable / damaged parts of chair writing and replacing with new parts/components as per required size and shape to match with existing including re-assembling as under complete all as per drawing No. FD-202 & 250, as specified and as directed:

S&F front leg of size 55x30x660mm long made out of 1st class HW (teak)

S&F rear leg of size 55x30x890mm long made out of 1st class HW (teak)

S&F rails of size 30x65x490mm long made out of 1st class HW (teak)

S&F arms of size 55x19x495mm long made out of 1st class HW (teak)

M&L for tightening of loose joints with bamboo pins

S&F back stiffiner of size 12x50x445mm made out of 1st class HW (teak)

M&L for removing carefully the existing unserviceable / damaged parts of chair dining and replacing with new parts/components with suitable sized bamboo pins as per required size and shape to match with existing including re-assembling as under complete all as per drawing No. FD-279 & 228, as specified and as directed:

S&F front leg of size 45mmx45mmx460mm high made out of 1st class HW (teak)

S&F rear leg of size 45mmx65mmx890mm high made out of 1st class HW (teak)

S&F front rail of size 30x65x400mm long made out of 1st class HW (teak)

M&L for tightening of loose joints with bamboo pins

S&F back stiffner of size 15x50x390mm long horizontal rest slightly curved U shaped made out of 1st class HW (teak)

M&L for removing carefully the existing unserviceable / damaged parts of chair easy and replacing with new parts/ components with suitable sized bamboo pins as per required size and shape to match with existing including re-assembling as under complete all as per drawing No. FD-201, 17 & 229, as specified and as directed:

S&F leg of size 55x25x535mm high made out of 1st class HW (teak)

S&F front rails of size 25x70x520mm long made out of 1st class HW (teak)

S&F side rails of size 25x70x520mm long made out of 1st class HW (teak)

S&F rear rail of size 50x25x500mm long made out of 1st class HW (teak)

S&F stiffners of teak wood of existing size

S&F of arms of size 65x25x610mm long made out of 1st class HW (teak)

M&L for carrying out repairs and replacement of the following parts of side board by removing carefully existing unserviceable/damaged parts and replacing with new parts/ components as per required size and shape to match with existing including re-assembling as under complete all as per drawing No. FD-241 & 26 as specified and as directed:

S&F top made out of 18mm thick prelaminated particle board exterior grade, phenyl formoldehyde bonded, flat pressed three layer BWR type-II with MS screws as per size and shape including 4mm thick teak wood beading all around

S&F back, 6mm thick plywood BWR of size 1220x625mm

S&F side 18mm thick plywood BWR of size 455x625mm

S&F drawer shape and size shall be as per shawn on drg.

S&F door of size 585x835x18mm BWR plywood

S&F partition of 18/19mm thick block board commercial type between shelves/drawers duly polished of existing size

S&F brass lock of size 40mm four lever with duplicate key

S&F shelves of size 455x835x18mm thick BWR plywood

S&F leg of size 45x45mm at top 25x25mm at bottom made out of 1st class HW (teak)

S&F side and back of drawers with 12mm thick plywood commercial type of existing size

M&L for carrying out repairs and replacement of the following parts of teapoy by removing carefully the existing unserviceable/damaged/broken parts and replacing with new parts/ components as per required size and shape to match with existing including re-assembling as under complete all as per drawing No. FD-232 & 34, as specified and as directed:

S&F leg of size 60x30x532mm high made out of 1st class HW (teak)

S&F long rail of size 20x60x600mm long made out of 1st class HW (teak)

S&F short rail frame of size 20x60x450mm long made out of 1st class HW (teak)

S&F top of size 600x450mm made out of 18/19mm thick ply wood BRW grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around the top and bottom side of the top shall be painted with a coat of white primer

S&F stiffeners of teak wood of existing size

Tightening existing joints using new bamboo pins of existing size

M&L for carrying out repairs and replacement of peg table by removing carefully existing unserviceable/damaged parts and replacing with new parts/ components as per required size and shape to match with existing including re-assembling as under complete all as per drawing No. FD-236 & FD-277, as specified and as directed:

S&F leg of size 30x50x370mm high made out of 1st class HW (teak) as per existing size & shape

S&F top long rail of size 20x40x450mm long made out of 1st class HW (teak)

S&F top short rail of size 20x40x300mm long made out of 1st class HW (teak)

S&F top of size 450x300mm made out of 18/19mm thick ply wood BRW grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around the top and bottom side of the top shall be painted with a coat of white primer

S&F in replacement of stiffiner 2Nos. on bottom section to connecting legs in short side

Tightening existing joints using new bamboo pins

M&L for carrying out repairs and replacement of the following parts of table bed side by removing carefully the existing unserviceable/damaged parts and replacing with new parts/ components as per required size and shape to match with existing including re-assembling as under complete all as per drawing No. FD-276, as specified and as directed:

S&F top 18mm thick BWR grade plywood of size 230x450mm fixed with 1mm thick laminated sheet at top

S&F backply 6mm thick BWR grade of size 510x450mm

S&F 12mm thick ply wood comercial type at bottom of existing size

S&F shelves 12mm thick BWR grade plywood teak face of size 230x450mm

S&F top 18mm thick BWR grade plywood of size 230x450mm fixed with 1mm thick laminated sheet at top

M&L for carrying out repairs and replacement of the following parts of table bed side by removing carefully the existing unserviceable/damaged parts and replacing with new parts/ components as per required size and shape to match with existing including re-assembling as under complete all as per drawing No. FD/E6/MAP/15(R), as specified and as directed:

S&F leg made out of 18/19mm MS square pipe of 18 guage as per existing shape and size duly painted with black synthetic enamel paint

S&F Top made out of 18/19mm thick prelaminated partical board of size 450mmx450mm including PVC edeging alround

S&F side made out of 18/19mm thick prelaminated partical board of size 500mmx450mm

S&F front shutter made out of 18/19mm thick prelaminated partical board of size 400mmx300mm

S&F bottom made out of 18/19mm thick prelaminated partical board of size 450mmx450mm

S&F back made out of 18/19mm thick prelaminated partical board of size600mmx450mm

S&F telescopic channel for drawer as per exsiting size and shape

S&F front Shutter made out of 18/19mm thick prelaminated partical board of size 400mmx450mm

S&F handle CP for drawer and shutter as per shown on drg.

M&L for carrying out repair and replacement of the following parts of table 900x600x760mm by removing carefully the existing unserviceable /damaged parts and replacing with new parts/ components as per required size and shape to match with existing including re-assembling as under complete all as per drawing No. FD-283, as specified and as directed:

S&F leg of size 60x30x740mm high made out of 1st class HW (teak)

S&F long rail of size 20x60x900mm long made out of 1st class HW (teak)

S&F short rail of size 20x60x600mm long made out of 1st class HW (teak)

Tightening existing joints with new bamboo pins

S&F drawer as per existing shape & size made out of 1st class HW (teak)

S&F plywood 6mm thick, commercial type at bottom and sides of drawer

S&F table top made out of 18/19mm thick ply wood BRW grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around the top and bottom side of the top shall be painted with a coat of white primer

S&F stiffiner of size 25x40x600mm long made out of 1st class HW (teak)

M&L for carrying out repairs and replacement of the following parts of table writing by removing carefully the existing unserviceable/damaged/broken parts and replacing with new parts/ components as per required size and shape to match with existing including re-assembling as under complete all as per drawing No. FD-275, as specified and as directed:

S&F leg (35 x 55x732)mm high made out of 1st class HW (teak)

S&F drawer as per existing shape and size

S&F bottom rail (side stiffener) (20x50x355mm) long made out of 1st class HW (teak)

S&F table top of size 1175x600mm made out of 18/19mm thick ply wood BRW grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around the top and bottom side of the top shall be painted with a coat of white primer

M&L for removing carefully the existing unserviceable/damaged parts of chair wooden bottom without arm and replacing with new parts/ components as per required size and shape to match with existing including re-assembling as under complete all as per drawing No. FD-56(M) & FD-285, as specified and as directed:

S&F front leg of size 50x50x445mm high made out of 1st class HW (teak)

S&F rear leg of size 40x65x840mm high made out of 1st class HW (teak)

S&F front rail of size 25x65x415mm long made out of 1st class HW (teak)

S&F side rail of size 25x65x400mm long made out of 1st class HW (teak)

S&F back stiffner 15x50x375mm long (slightly curved) made out of 1st class HW (teak)

S&F in replacement of seat made out of 6mm thick plywood BWR grade ISI marked with 6mm dia preparations to be provided to plywood seat

M&L for carrying out repairs and replacement of the following parts of bed plywood top as per required size and shape to match with existing including re-assembling as under complete all as per drawing No. FD-246, 247, 21, 215, as specified and as directed:

S&F plytop made out of 12mm thick commercial plywood of size 1800x900mm BWR ISI marked IS-303

S&F stiffiner to support made out of 1st class Hard Wood (teak) of size (40x60x880)mm

S&F seasoned teak wood supports of size 50x50x900mm of existing size

S&F long rail frame of size 35x90x1980mm long made out of 1st class HW (teak)

S&F short rail frame of size 60x60x900mm made out of 1st class HW (teak)

S&F head board frame made out of 1st class HW with 4mm thick OST plywood (teak) as per existing shape & size

S&F foot board frame made out of 1st class HW with 4mm thick OST plywood (teak) as per existing shape & size

M&L for carrying out repair and replacement of the following parts of bed hard MAP as per required size and shape to match with existing including re-assembling as under complete all as per drawing No. FD-E6/MAP/8(R), as specified and as directed:

S&F plywood top 12mm thick in one piece BWR grade commercial type as per IS-303 fixed on fame of existing size.

S&F head rest made out of 18/19mm pre-laminated particle board interior grade

S&F foot rest made out of 18/19mm pre-laminated particle board interior grade

M&L for welding works on loose/broken joints

M&L for repairs to Charpoy Folding IP by replacing the following parts as per required size and shape to match with existing including re-assembling as under complete all as per drawing No. FD-388(R), as specified and as directed:

S&F plywood top 12mm thick in two piece BWR grade commercial type as per IS-303, fixed on wooden frame of existing size

S&F rubber shoes of best quality

M&L for repairs to table dining 1200x900mm by removing carefully existing unserviceable/damaged parts and replacing with new parts/ components as per required size and shape to match with existing including re-assembling as under complete all as per drawing No. FD-272/FD-273, as specified and as directed:

S&F leg of size 90x45x750mm high made out of 1st class HW (teak)

S&F top of size 1200x900mm made out of 18/19mm thick ply wood BRW grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around the top and bottom side of the top shall be painted with a coat of white primer

S&F long rail of size 45x90x1200mm long made out of 1st class HW (teak)

S&F short rail of size 45x90x900mm long made out of 1st class HW (teak)

M&L for repairs and replacement to Table dinning 6/8 persons by removing carefully the existing unserviceable/damaged parts and replacing with new parts/ components as per required size and shape to match with existing including re-assembling as under complete all as per drawing No. FD-273, as specified and as directed:

S&F leg of size 40x75x732mm made out of 1st class HW (teak)

S&F table top of size 1800x900mm made out of 18/19mm thick ply wood BRW grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around the top and bottom side of the top shall be painted with a coat of white primer

S&F triangular bracket (as support) made out of 2nd class HW (teak) as per required shape & size

S&F long rail 25x100x1800mm made out of 1st class HW (teak)

S&F short rail 25x100x900mm made out of 1st class HW (teak)

M&L for carrying out repairs / replacement to of Table Dressing Ladies by removing carefully the existing unserviceable/damaged parts and replacing with new parts/ components as per required size and shape to match with existing including re-assembling as under complete all as per drawing No. FD-251, as specified and as directed:

S&F 6mm thick plywood one side teak face, BWR grade ISI marked in backs of box

S&F 6mm thick plywood one side teak face, BWR grade ISI marked in sides of box

S&F in replacement of old defaced of mirror of size 360x1220mm with 1st class hard wood (teak) frame all around

S&F drawer as per existing shape and size

S&F glass stud with aluminium frame

S&F leg of size 45x45x75mm made out of 1st class hard wood (teak)

M&L for carrying out repairs / replacement to of Book case wooden by removing carefully the existing unserviceable/damaged parts and replacing with new parts/ components as per required size and shape to match with existing including re-assembling as under complete all as per drawing No. FD-237, as specified and as directed:

S&F 18/19mm thick pre laminated particle board interior grade one side decorative choice lamination and other side balancing white lamination shade and 4mm thick teak wood edging alround

S&F 6mm thick ply wood commercial type on back of existing size

S&F 18mm thick pre laminated particle board interior grade one side decorative choice lamination and other side balancing white lamination on sides of existing size

S&F 12mm thick ply wood commercial type in shelves of existing size

S&F legs of teak wood of existing size

S&F chromium plated knob, best quality, of approved design and type

M&L for carrying out repairs and replacement to table centre by removing carefully the existing unserviceable/damaged/boken parts and replacing with new parts/ components as per required size and shape to match with existing including re-assembling as under complete all as per drawing No. FD-235 & 274, as specified and as directed:

S&F leg of size 45x45mm at top and 30x30mm at bottom and 372mm high made out of 1st class HW (teak)

S&F long rail of size 40x19x900mm long made out of 1st class HW (teak)

S&F short rail of size 40x19x450mm long made out of 1st class HW (teak)

S&F table top of size 900x450mm made out of 18/19mm thick ply wood BRW grade of approved make confirming to IS with 1mm thick laminated sheet at top and 4mm thick teak wood edging all around the top and bottom side of the top shall be painted with a coat of white primer

S&F stiffeners of teak wood of existing size

Tightening existing joints with new bamboo pins

Note for serial item Nos 1 to 24: Replacement of wooden parts/components shall be deemed to include for French polishing all as specified & directed

M&L for re-canning of furniture article except verandah chair with plastic cane (oval shaped), light coloured, 2mm wide in Godrej or as approved pattern complete all as shown on drawings, as specified and as directed

M&L for re-canning of verandah chair with 4mm wide plastic cane (oval shaped), light coloured as per existing pattern as approved complete all as shown on drawings, as specified and as directed

Daya Nand Jindal

singh traders