Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.9 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹41.2 L+₹4.5 L (12.3%)Rejected-Finance FLAT NO F2 BLOCK A FIRST FLOOR THE LEGACY APARTMENT AIRPORT ROAD GOLA KA MANDIR GWALIOR MP 474005 | GWALIOR | GWALIOR | MADHYA PRADESH | 474005 | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹41.2 L+₹4.5 L (12.3%)Rejected-Finance | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹42.5 L+₹5.8 L (15.9%)Rejected-Finance | L4 | Rejected-Finance Not Lowest |
Tender Value
₹49.5 L
EMD Value
₹99,000
Closing Date
12 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Gwalior
Garrison Engineer Gwalior Morar Cantt
8921/GWL/E8 COMPREHENSIVE MAINT OF TPT LINES AT MORAR CANTT GWALIOR
2023_MES_632999_1
8921/GWL/E8
Open Tender
Civil Works
Works
335 days
Garrison Engineer Gwalior
Please refer tender documents
9 documents required · 9 mandatory
₹500
Garrison Engineer Gwalior
₹99,000
Yes
12 Feb 2024
15 Dec 2023
16 Jan 2024
15 Dec 2023
12 Jan 2024
30 Dec 2023
Amount
Dismantiling of stone slabs and tiles (Kota stone etc.) of any discription or any thickness in floors, aprons, skirting, dado etc. laid bedded and pointed in any mortar complete all as specified and directed.
Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) complete all as specified and directed.
Demolition of cement concrete of any description and in any position (reinforced) in ground floors and paving not exceeding 15 cm thick (below or above GL) complete all as specified and directed Note:Demolition material throughout MOD Land rate include above item .
Demolition of cement concrete of any description and in any position reinforced concrete (re-inforcement cut to facilitate demolition) including disposal of unserviceable of mateial complete all as specified and directed. Note:Demolition material throughout MOD Land rate include above item
M&L for vitrified ,coloured and printed tiles of 8 to 10 mm thick (Square / Rectangular ) polished area of Each tiles not exceeding 0.36 Sqm as in flooring over and including 15 mm thick cement screed in CM (1:4 ) set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.
M&L for vitrified ,coloured and printed tiles of width as directed and 8 to 9 mm thick as in skirting fixed over and including 10 mm thick cement screed in CM (1:4 ) set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.
M&L for non skid ceramic tiles, joint free, coloured tiles 7mm to 8 mm thick (Square or rectangular) area of Each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set over and including 15 mm thick cement screed in (1:4) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.
M&L for ceramic tiles, joint free, coloured tiles 7mm to 8 mm thick as in skirting fixed over and including 10 mm thick cement screed in (1:3) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.
M&L for digital glazed ceramic coloured tiles of size 300mm x 450mm x 7mm thick on vertical faces ie. as in skirting/dado etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles fix over and including 10 mm thick backing coat in cement mortar (1:3) complete all as specified and directed.
M&L for non skid ceramic Coloured tiles of size 300mmx300mmx 6 mm to 7mm thick, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match with the colour of tiles, over and including 15 mm thick screed bed or bedding layer of cement mortar( 1:6) complete all as specified and directed.
M&L Granite slab 18 mm to 20 mm thick machine cut, bedded and joined with cement and pointed with white cement with admixture of pigment to match over and including 20 mm thick screed bed CM (1:3) .the shade of granite stone including cutting and polishing type as in cill and jamb/skirting, steps cooking plateforms including rounding off the exposed edges and polishing complete all as specified and directed.
M&L for machine cut Kota stone slab 20mm to 25 mm thick , as in flooring , laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing , over and including screed bed or bedding layer of mortar 20 mm thick in cement mortar (1:3 ) complete all as specified and directed.
M&L for machine cut kota stone slab 10mm -15 mm thick as in riser / steps, skirting, dado,cills and pillars laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and polishing over and including 10 mm thick backing coat in CM (1:3) complete all as specified and directed.
Demolition of brick work /stone work built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.
M&L for Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:6).complete all as specified and as directed.
M& L for Brick work with sub-class `B' bricks, straight or curved on plan to any radius, in half brick work built in cement mortar 1:4 complete all as specified and as directed.
M&L for 75mm thick PCC (1:3:6) Type C2 (using 40mm graded stone aggregate) as in plinth protection surface even and fair without using extra cement including forming & filling expension joints 65 mm deep x 10 mm wide filled with sealing compound grade A complete all as specified and as diected
M&L for PCC (1:4:8) Type D2 (using 40mm graded stone aggregate) as in foundation filling mass concrete, complete all as specified and directed.
M & L for 40 mm thick PCC (1:2:4) Type B1 (using 20 mm graded stone aggregate) as in floor surfaces concrete complete all as specified and directed.
M & L PCC (1:2:4) Type B0 (using 12.5 mm graded stone aggregate) as in levelling course/mass concrete complete all as specified and directed.
Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with aproved colour, design & pattern as in foothpath, parks, lawns, drive ways or light traffic parking etc. of required strenght, thickness & size / shape, made by table vibrating method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding / laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra cement complete all as specified and directed.
M&L for cement concrete (1:2:4) type B-1 (using 20mm graded stone agrregate) as in lintels upto 1.5m clear span, cills, stes, seimic and other similar bands, plinth course, string course, lacing course, parapets and railings upto 60cm in height, coping, kneelers, apex stones, bed plates, kerbs, water througs and the like including wheathering slightly rounded or chamfered angle and throating complete all as specified and directed.
M&L for vitrified paver color tiles of size 30 cmx30cmx9 to 10 mm thick, moulded set jointed and pointed in neat cement slurry with grey cement and pigment, in floors, over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed.
Demolition of wall and ceiling boards fibre pulp insulation etc or insulation boards/slabs/blankets any thickness including cover fillets, complete all as specified and directed.
S&F of False ceiling 4 mm thick HPSC pre-prime non asbestos fibre cement building board (E-classic of size 600mm x 600 mm/ 595 mm x595 mm ) decorative finish fixed with clips and screw including powder coated galvanised MS grid frame work false ceiling of ( Main Tee of size 32mmx24mmx0.65mm cross, tee 24mmx24mmx0.45mm ) and with slot for fixing including suspended with 2mm dia. GI wire hangers fixed with steel dash through fasteners from purline of the roof complete all as specified and as directed
S&F in repair for E- grid false ceiling 4 mm thick HPSC pre-prime non asbestos fibre cement building board (E-classic size 600mm x 600 mm / 595mm x 595 mm) decorative finish and fixed with from purline of the roof, complete all as specified and directed.
S&F in repair vitreous china urinals, Half stall type ,white with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal againest wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement mortor 1:2 complete all as specified and directed.
S&F in repair vitreous china urinals, bowl type ,white with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement mortor 1:2 complete all as specified and directed.
S&F in repair 5mm thick PVC sheet fillet of width 35mm for wall panelling (At the spacing of 1 feet centre to centre) inclusive of fixing on to wall to make PVC Frame as per secification and drawing comlplete all as specified and directed.
S&F in repair Solid PVC Wall Lining consisting of 5mm thick Plain wood grain printed PVC sheet inclusive of solvent cement and fixing at site on to wall to make PVC Frame as per specification and drawing comlplete all as specified and directed.
S&F 12mm thick tuffended designer glass fixed on steel pivot all as approved sample with engravings/ designs/ symbols to the pattern and style as approved and apporved by Engineer-in-Charge comlplete all as specified and directed.
S&F 'D' type stanless steel handle decorative type 300mm long bright finished all as per design/ pattern approved by Engineer-in-Charge comlplete all as specified and directed.
S&F 3mm thick, plain glass pin head type and glazing with oil putty,silicone or wooden beads, in square not exceeding 0.5 sqm in Each pane including hacking out old broken glass of any thickness and any description from wooden/ steel frame/ stone,concrete or brick surrounds complete all as specified and directed.
S&F in repair galvanised wire cloth, 0.48 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised staples complete all as specified and directed
Taking down cement or cement lime plaster on brick or stone walls etc. including racking out joints hacking for key scrubbing down with water etc.comlplete all as specified and directed.
M&L for 15 mm thick rendering in cement mortar (1:4) on brick / concrete/ stone surfaces finished even and smooth without using extra cement complete all as specified and as directed. Note : Water proofing compound shall be measured and paid separately under appropriate item of BOQ as "supply only "
M&L for 15 mm thick rendering in cement mortar (1:6) on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.
M&L for 5 mm thick rendering in Cement Mortar (1:3) on ceiling finished even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of the newly plastered surfaces of wall & applying 3 coats of white wash on wall surfaces complete all as specified and directed.
M & L for two coats of oil bound emulsion paint over a coat of Birla wall care putty on plastered surfaces on wall incl. preparation of surfaces complete all as specified and directed. .
M&L for preparation of the newly plastered surfaces of ceiling & applying 3 coats of white wash on ceiling surfaces complete all as specified and directed.
Supply only Liquid water proofing compound complete.
M&L for 10 mm thick rendering in CM (1:3) over floor/wall ,surface finished even and Smooth mixed with water proofing compound complete all as speceified and as directed. Note : Water proofing compound shall be measured and paid separately under appropriate item of BOQ as "supply only "
M&L Plain cement concrete (1:5:10) type D2 (using 40 mm graded stone aggregate) as in foundations / mass concrete complete all as specified and directed.
M&L for Two or more coats of Epoxy (hardener and raisner ) Coating over primer over new prepared wall/ floor surfaces complete as in sunken portion complete all as specified and as diected.
Material and labour for Preparation of old decorated surface of walls of plastered or unplastered surfaces by brooming down or steel wire brushing, scarping down smoke soot, moulds, moss and efflorescent salts treating oil and greasy spots and applying two coats of white wash complete all as specified and directed.
Material and labour for Preparing of old decorated surface of Ceilings of plastered or unplastered surfaces by brooming down or steel wire brushing, scarping down smoke soot, moulds, moss and efflorescent salts treating oil and greasy spots and applying one coat of white wash complete all as specified and directed.
Material and labour for Preparing of old decorated surface of walls of plastered or unplastered surfaces by brooming down or steel wire brushing, scarping down smoke soot, moulds, moss and efflorescent salts treating oil and greasy spots and applying one coat of oil emulsion complete all as specified and directed.
M&L for Complete removal of existing treatment (internal and external suraces) on walls by scrapping with steel wire brush or any other means including one coat of wall care putty on wall and applying two coats of oil emulsion complete all as specified and directed.
Complete removal of existing treatment from external wall preparation of old plastered surface and applying two coats of premium acrylic exterior anti algal fungal emulsion paint over one coat of weather coat exterier primer on wall complete all as specified and direced.
M&L for complete removal of exiting treatment from external wall preparation of old plastered surface and applying one coat of premium acrylic exterior anti algal fungal emulsion paint over one coat of weather coat exterier primer on wall complete all as specified and directed.
Material and labour for prepration of old or untreated surfaces of wood or wood based surfaces and applying one coat of synthetic enamel paint over a prime coat of pink primer on surfaces of any desription, not otherwise described, over 10 cm width or girth complete all as specified and directed.
M&L for preparation of wall surface and aplying one coat of wall putty on wall surface finished even and smooth including rubbing complete all as spefied and directed
Material and labour for applying one coat of synthetic enamel paint on steel or iron surfaces of any decription, over 10 cm in width or grith, not othewise described including preparation of surfaces and over a coat of red oxide primer complete all as specified and directed.
Taking up or down steel tubing and connetion including cleaning for refixing or removing to store of 15mm bore of pipe, complete all as specified and directed.
Taking up or down steel tubing and connetion including cleaning for refixing or removing to store of 20mm bore of pipe, complete all as specified and directed.
Taking up or down steel tubing and connection including cleaning for refixing or removing to store of 25mm bore of pipe, complete all as specified and directed.
Supply and laying 20 mm dia CPVC pipe SDR11 and Plain CPVC SDR11 fittings (ISI ) marked ,concealed or fixed to wall or laid in floors complete all as specified and as directed
supply and laying 25 mm dia CPVC pipe SDR11 and Plain CPVC SDR11 fittings (ISI ) marked ,concealed or fixed to wall or laid in floors complete all as specified and directed.
S & F 15 mm dia steel tubing and connection galvanized with all fittings medium grade tube in floors, walls and ceiling etc complete all as specified and directed.
S & F 20 mm dia steel tubing and connection galvanized with all fittings medium grade tube in floors, walls and ceiling etc complete all as specified and directed.
S & F 25 mm dia steel tubing and connection galvanized with all fittings medium grade tube in floors, walls and ceiling etc complete all as specified and directed.
Taking down eaves gutters and rain water pipes (any size 75mm to 110mm of any pattern) ,of any description and in any position, including all fittings , heads, shoes, bends, swan necks, etc., (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.
S&F for 110mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls complete all as specified and directed.
S&F for 75 mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls complete all as specified and directed.
S&F for 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints,laid in trenches or in floors complete all as specified and directed.
S&F for 110mm dia PVC (SWR) pipes bends any radious complete all as specified and directed.
S&F for 75 mm dia PVC (SWR) pipes bends any radious complete all as specified and directed.
S&F for 110mm dia PVC (SWR) pipes bends any radious complete all as specified and directed.
S&F for 75 mm dia PVC (SWR) pipes bends any radious complete all as specified and directed.
S&F for 110mm dia PVC (SWR) pipes junction,single (single T/Y ) equal or unequal any radious with access door, complete all as specified and directed.
S&F for 110mm dia PVC(SWR) vent cowl, complete all as specified and directed.
M&L for 75 mm dia of out let PVC (SWR) floor trap plain with CP grating including jointing with solvent cement as in repair complete all specified.
S&F in repair 15mm, pillar taps Fancy type long body chromium plated,cast copper alloy, with brass ceramic disc spindle and capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe complete all as specified and directed.
S&F in repair 15mm angle cock chromium plated,cast copper alloy, with brass ceramic disc spindle and capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe fixed and complete all as specified and directed.
S&F in repair full Brass urinal Spreader chromium plated,cast copper alloy, with brass ceramic disc spindle and capston heads,scewed down high pressure for iron pipe fixed and complete all as specified and directed .
S&F in repair for 15mm ,bib tap Fancy type long body chromium plated,cast copper alloy, with brass ceramic disc spindle and capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe complete all as specified and directed.
S&F in repair for shower rose brass chromium plated without swivel joints, 100 mm in size including fixing to steel pipe complete all as specified and directed.
S&F in repair for 15 mm Stop valve cast copper alloy screwed down high pressure with CAPSTON HEAD handle chromium plated with long shank and cup (concealed type) screwed both ends for iron pipe 15mm bore or for unions complete all as specified and directed.
S&F in repair Brass CP WHB mixer for mixing hot & cold water screwed down for 15mm bore iron pipe complete all as specified and directed.
S&F in repair Heatth Faucet with one meter PVC flexible body pipe of CP including fixing bracket, complete all as specified and directed.
S&F in repair for wall mixer with Three in one pattern in of brass CP, complete all as specified and directed.
S&F in repair for wall mixer with Two in one pattern in of brass CP, complete all as specified and directed.
S&F Single Lever Sink Mixer With Swinging Spout on Upper Side (Wall Mounted Model) With Connecting Legs & Wall Flanges complete all as specified and directed.
S&F in repair Soap dish of CP fixed with PVC rawal plugs and screw complete all as specified and directed.
S&F in repair CP tubular towel rail D type 20mm dia and 60cm long complete all as specified and directed.
S&F for peg set of six S.S. fixed to wall with PVC plugs and screw, complete all as specified and directed.
Supply only 15mm dia PVC connection with PTMT nuts of length 450 mm, complete all as specified and directed.
S&F in repair Flushing jet Spray (chromium plated) for padestral pattern EWC including 1.00 metre tube flexible pipe and brass chromium plated nuts completed all as specfied and directed
S&F in repair 2 Way Chromium plated angle cock with flange Complete all as specified and directed
S&F in repair 2 Way Double handle Bib cock with flange Complete all as specified and directed .
S&F in repair mild steel Chromium plated grating 100 mm dia complete all as specified and directed.
S & F in repair Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 500 litres capacity, triplr layer in construction white in colour hoisted and fixed in position complete all as specified and directed.
S & F in repair Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 1000 litres capacity, triplr layer in construction white in colour hoisted and fixed in position complete all as specified and directed.
S&F for 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 m m - 210 gms / 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.
S&F as in repair 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed 20mm dia of pipe . (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.
S&F in repair gun metal globe /valve with iron wheel head screwed both ends for iron pipe of 20mm bore, complete all as specified and directed.
S&F in repair gun metal globe / valve with iron wheel head screwed both ends for iron pipe of 25mm bore complete all as specified and directed.
Disconnecting existing water tanks, setting aside (or lowering if required) for repairs, cleaning etc and reconnecting and refixing in position capacity of tank exc 500 and n.exc 1000 ltr. (cleaning, repairing etc measured separately) complete all as specified and directed.
Cleaning and removing all scale and dirt etc. from tanks and from mouths of circulating pipes etc capacity of tank exc 250 ltrs but n.exc 500 Ltrs complete all as specified and as directed.
Cleaning and removing all scale and dirt etc. from tanks and from mouths of circulating pipes etc capacity of tank exc 500 ltrs but n.exc 1000 Ltrs complete all as specified and as directed.
S&F in repair sinks with drainage board made out of stainless steel 0.90 mm thick kitchen or laboratory with ;plugs, washers, and waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, and connecting union to pipe overall size 915 mm x 460 mm with bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed .
S & F in repair for plate rack made out of stainless steel of wire type / sheet pattern size and type as directed by Engineer In Charge and approved by GE fixed to wall with necessary fitting arrangement Complete all as specified and directed.
S & F in repair for SS Railing made out of stainless steel any type of pattern size and type as directed by Engineer In Charge and approved by GE fixed to wall with necessary fitting arrangement Complete all as specified and directed.
S&F for sinks made out of stainless steel 0.90 mm thick kitchen or laboratory with ;plugs, washers, and waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, and connecting union to pipe overall size 495 mm x 420 mm with bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed fixed in repair.
S&F for PVC bath room cabinate mirror of Size 500mmx400 mm complete all as specified and directed.
S&F in repair viterous china wash down water closet pan (pedestal pattern) white excluding fixing bolts,flushing cistern and flush pipe including connection to drain and to flushing pipe syphonage pipe etc and mild steel chromium plated or aluminised hinges device & on CP Jet complete all as specified and directed.
S&F in reapir plastic water closet seat cover white coloured closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging devise complete all as specified and directed.
M&L in repair for vitreous china squatting pan, orissa pattern of size 580x440mm white with integral foot rest (excluding flushing cistern) including vitreous china ‘P’ or ‘S’ traps connection to trap and to flushing pipe and making good to floor, complete all as specified and directed.
S&F in repair of vitreous china wash basin, white, flat back of size 550 x 400mm Including waste coupling ,waste pipe and labour for fixing pillar tap, PVC connection but including cutting for and pinning in ends of and including brackets complete all as specified and directed. . Note : Pillar tap and PVC connection will be measured paid separetly under appropriate item.
S&F in repair of vitreous china wash basin, white, oval type of size 550 x 400mm Including waste coupling ,waste pipe and labour for fixing pillar tap ,PVC connection but including cutting for and pinning in ends of and including brackets complete all as specified and directed. . Note : Pillar tap and PVC connection will be measured paid separetly.
S&F in repair PVC valveless syphonic action type flushing cistern low level white with inlet ball valve,float end handle handle including bracket complete of capacity 10 litres, complete all as specified and directed.
Dismantling boarding any description fixed with nails in any position (including cup board shutter/shelve upto 25mm thick) complete all as specified and directed.
S&F for 18 mm thick PVC Celuka ply of one side prelaminated and other side plain white colour fixed with screws ,solvent cement /adehesive complete all as specified and directed.
S&F for 12 mm thick PVC Celuka ply of both side prelaminated and other side plain white colour fixed with screws ,solvent cement /adehesive complete all as specified and directed.
S&F for aluminium anodised barrel tower bolts of extruded section of 100mm size, complete all as specified and directed.
S&F for continuous (piano) hinges mild steel bright finish or electro galvanised width of width of flaps nexc 30 mm (when open), complete all as specified and directed.
S&F for extruded aluminium alloy handle of 100 mm size fabricated type, anodised complete all as specified and directed.
S&F for Haps and staple safety type Aluminium anodised with MS hinge pin including bolt to hinge pin of 100 mm size fixed with screw complete all as specified and directed.
S&F for magnate catcher of metal body and striking plate heavy duty includind fixed with screw, complete all as specified and directed.
S&f corner glass shelf 300mm size (with ABS Bracket) complete all as specified and directed.
S&F sheet glass shelf assembly consisting of 5.5mm thick glass shelf 12cm wide with chromium plated bracket and guard and railing 60cm long completed all as specified and directed
S&F in repair curtain rod stainless steel decorative type 25 mm dia including fixing bracket and end knobs complete all as specified and directed.
Taking down chowkhat or frame (without taking off shutter from the frame) not exceeding 1.5 Square Metre Each , removing from the site Cutting holes exc 150 Sq.cm but n.exc 400 Sq.cm in super facia area into or through brick walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l (Using 20mm graded stone aggregate) as required complete all as specified and as directed.
Taking down chowkhat or frame (without taking off shutter from the frame) exceeding 1.5 sqm and not exc 4.00 sqm Each , removing from the site Cutting holes exc 150 Sq.cm but n.exc 400 Sq.cm in super facia area into or through brick walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l (Using 20mm graded stone aggregate) as required complete all as specified and as directed.
Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm Each complete all as specified and as directed.
Supply & Fixing solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube fixed in opening as per specification & drawings complete all as specified and as directed.
S &F for factory made solid panel PVC door shutter 30mm thick ( style) consisting to frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Penelling of plain colour PVC sheet to be fitted in the MS. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and as directed.
All as per item No 132.00 but wire gauge panel i.e panel should be wire gauge in lieu of PVC sheet panel .wire gauge shall be wraped on a additional squre tube 8 mm M.S. solid tube shall be welded to M.S tube and wire guage shall be strechtd tightly fiRMed complete all as specified and as directed
S&F 30 mm thick Flush shutters ,soild core construction ,with particle board core and plywood face panels , commercial type both face is covered with decorative face veneer with lipping /frame to match and complete all as specified and directed.
M&L for New surface of wood and wood based material any description and in any position over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.
S&F in repair for floor door stopper of brass body and tongue, overall length of cover plate of size 150 mm , anodized, with hard drawn steel spring , fixed to shutters complete all as specified and as directed.
S&F for stainless steel butt hinges of 100mm size complete all as specified
S&F for Extruded aluminium alloy handle of 150 mm size fabricated type, anodised complete all as specified..
S&F for aluminium anodised barrel tower bolt of 150mm of extruded section complete all as specified.
M & L for Powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors , windows , ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
M & L for Powder coated (minimum thickness of powder coating 50 micron) aluminium window and ventilator (adequate track) without sash, aluminium section weighing 0.55 kg/m including joining cleats, glazing clips, rubber neoprene packing, necessary powder coated hardware ie. handles, barrel tower bolts, hinges etc, powder coated aluminum snap beading, screws etc. complete all as specified and directed Note : Panel filling ie. glass, fibre sheet, board, wire mesh etc. shall be measured and paid for separately.
M & L for Powder coated (minimum thickness of powder coating 50 micron) aluminium door shutters of aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing, powder coated aluminium handles 150mm size 2 Nos, 3 Nos powder coated aluminium hinges heavy duty and 02 Nos 150mm long powder coated aluminium tower bolts in Each door shutter with powder coated aluminum snap beading, screws etc. complete all as specified and directed Note : Panel filling ie. glass, fibre sheet, board etc. shall be measure and paid for separately.
M & L for Powder coated (minimum thickness of powder coating 50 micron) aluminium window and ventilator (adequate track(sliding ) without sash, aluminium section weighing 0.25 kg/m including joining cleats, glazing clips, rubber neoprene packing, necessary powder coated hardware ie. handles, barrel tower bolts, hinges, lock, clips as required on site etc, powder coated aluminum snap beading, screws etc. complete all as specified and directed Note : Panel filling ie. glass, fibre sheet, board, wire mesh etc. shall be measured and paid for separately.
S&F for 12 mm thick prelaminated particle board exterior grade prelamilated one side with decorative choice lamination and other side balancing white lamination fixed with screws complete all as specified and directed.
BLANK
S&F in repair door closer hydraulically regulated, designation No. 3, universal type, aluminium die-cast body (ISI Marked), suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed
S&F in repair of double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed
S&F galvanised wire cloth, 0.48mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised staples complete all as specified and directed
S&F for framed work such as grills gratings, etc, with ends of bars shouldered and or riveted , or forged into spikes, framed guard bars , barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290,E-165 , complete all as specified and directed.
M&L for applying two coats of synthetic enamel paint including Preparation of new Steel surface over 10 cm width or girth comlete all as specified and directed .
Dismantling of AC (corrugated / semi-corrugated) sheets in roof covering including any type of ridges complete all as specified and as directed.
S&F Pre painted galvalume sheet 0.50 mm thick having aluminum zinc coating 150 gsm/ sqm steel sheet any colour having tensile strength of 550 Mpa as in Roof covering /cladding to wall fixed with self tapping screws complete all as specified and directed
S&F Pre painted galvalume sheet 0.50 mm thick having aluminum zinc coating 150 gsm/ sqm plain steel sheet any colour having tensile strength of 550 Mpa as in Roof covering /cladding (ridge) to wall fixed with self tapping screws complete all as specified and directed .
S&F rolled section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates confiRMing to Fe-290 ( Gde E-165) complete all as specified and directed
Dismantling of wrought iron or mild steel work of any description not other wise provided for complete all as specified and as directed.
Removing excavated material nexc 50m and depositing where directed at a level nexc 1.5 m above the starting point with soil complete all as specified and as directed.
M&L for reinforced cement concrete nominal mix (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in salb supported in wall, beams and columns in floor, roof , landings etc . complete all as specified and directed.
Use and waste for formwork to soffits of suspended slabs such as roof slabs , floor slabs , landings and similar works , not exceeding 200 mm thick ( horizontal or sloping ) including slab edges for rough finished surfaces of concrete complete all as specified and directed.
S&F mild steel TMT bars 10 mm dia and over cut to length bent to shape required including cracking,bending spirally for hooping ends and binding with and including mild steel wire not less than 0.90 mm dia quality of steel conforming to Fe-410-0 or Fe-410-S complete all as specified and directed.
S&F TMT bars 6 to 8 mm dia cut to length bent to shape required including cracking,bending spirally for hooping ends and binding with and including mild steel wire not less than 0.90 mm dia quality of steel conforming to Fe-410-0 or Fe-410-S complete all as specified and directed.
Taking down existing tarfelt and plaster from roof and removing from site complete all as specified and directed.
M&L for 10 mm thick rendering in CM (1:4) over roof ,surface finished even and Smooth mixed with water proofing compond complete all as speceified and as directed. Note : Water proofing compound shall be measured and paid separately under appropriate item of BOQ as "supply only "
M&L for applying water proofing treatment with the following coats :- (a) First coat of bitumen primer conforming to IS -3384 @ 0.3 Kg/sqm (b) Second Layer of APP based polymectric membrane minimum weighing 3kg /sqm and minimum 3 mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms /sqm ) land on primed surface by torch application complete all as specified and as directed.
M&L for one coat of aluminium bituminous paint over polymetric membrane complete all as specified and as directed.
M & L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed.
Taking down carefully existing aluminum / copper point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, ceiling fan with regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc to match with existing surfaces complete all as specified and directed.
Taking down submain wiring of any size any type and in any position metalic/non metallic PVC conduit of wooden batten complete all as specified and directed.
Taking down unserviceable Sheet metal box & MCB DB SPN with MCB's of any make/capacity, complete all as specified and directed.
M&L for concealed point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH confiRMing to IS 694:2010 having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area (ISI marked with valid CML No) drawn in and including concealed non metallic rigid PVC conduit medium grade( ISI marked with valid CML No) not less than 20 mm dia with all fitting and fixing accessories and 1.5 Sqmm FRLSH confiRMing to IS 14930 (Part-I) 2001, PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to common earth dolly by providing suitable lugs with & including pressed steel sunken teRMinal boxes factory made for mounting switch, regulators etc with and including 2.8 mm thick plastic laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint inside for mounting switches. sockets etc complete for the following:-
One light point controlled by one switch.
One Ceiling fan point controlled by one switch.
One Exhaust fan point controlled by one switch.
One Bell/Buzzer point controlled by one way 5 Amp push button switch.
One 5 pin multipurpose socket out let 5/6 Amps on the same board with other switch.
One 3 pin/5 pin switch socket outlet, 5 Amps on independent board.
For one light point controlled by 2- two way switch
Description all as per item No 170.00 here in before but point wiring with 2.5 sqmm FRLSH confiRMing to IS 694:2010, multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sqmm FRLSH PVC insulated multi strand copper conductor cable as continous earth wire.
S&F switch piano, flush button single pole one way 5 Amp complete all as specified and directed.
S&F socket out let, multipurpose, 2 in 1 5 pin, 5 Amp complete all as specified and directed.
S&F switch piano, flush button single pole one way 15 Amp complete all as specified and directed.
S&F socket out let multipurpose flush type, 2 in 1 6 Pin 5/15 amps complete all as specified and directed.
S&F switch piano, flush button single pole two way 5 Amp complete all as specified and directed.
S&F bell push flush type, 5 Amps complete all as specified and directed.
S&F of buzzer Ding Dong, AC, 230 Volts, single pole complete all as specified and directed.
S&F ceiling rose surface bakelite 63.5 mm dia three teRMinal complete all as specified and directed.
S&F electronic step rotary type fan regulator of two module capacity 80 to 100 Watt, 240 volts, AC 50Hz complete all as specified and directed.
S&F Lamp holder with metal ring, PVC/Polycarbonate type with back plate suitable for batten fittings non ISI Marked complete all as specified and directed.
S&F LED 'T' Type Mirror light fitting 09/10 watt with provision of fixed in Lamp holder complete all as specified and directed.
M&L, sub main wiring with two single core PVC insulated unsheathed FRLSH confiRMing to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 6 sqmm size drawn in and including non metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 25 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 6 Sqmm FRLSH confiRMing to IS 14930 (Part-I) 2001, copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. (NOTE: (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface.
S&F MCB DB, sheet metal enclosures double door SPN 12 way with bus bar 240 volts 2 in 1 shutter type (METAL DOOR) type with blanking plates where required and IP 43 degree protection complete all as specified and directed.
S&F MCB DB, sheet metal enclosures double door SPN 8 way with bus bar 240 volts 2 in 1 shutter type (METAL DOOR) type with blanking plates where required and IP 43 degree protection complete all as specified and directed.
S&F, MCB SPN 63 Amps, 240 volts 'C' series 16 KA ,including connection with suitable size copper lugs complete all as specified and directed.
S&F, MCB SP 240 volts, 6 to 32 Amps, 'C' series 10 KA including connection with suitable size copper lugs. complete all as specified and directed.
Taking down unserviceable Sheet metal box & MCCB DB TPN with MCB's of any make/capacity complete all as specified and directed.
S&F sheet metal enclosure double door for distribution board factory made for MCB DB load link VTPN 4 way suitable for MCCB as incomer, 100 Amp,4 pole & Including MCCB 100 amps 4 pole 16 KA complete. (when MCB's are to be used) with suitable size of busbar complete,fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces to match with existing specification including taking down complete all as specified and directed.
Supply, laying and testing of cable XLPE insulated, aRMoured,heavy duty, electric LT UG cable with multi stranded aluminium conductor, 1100 Volts grade including taking out existing cable of following size complete all as specified and directed.:-
25 Sqmm 3.5 core.
35 Sqmm 3.5 core.
M & L for GI Pipe light grade complete with fittings laid in floor/ trenches/ wall as cable protection of 80 mm dia complete all as specified and directed.
Excavation in tenches not exceeding 1.5m wide and not exc 1.5m depth and getting out in hard/dense soil complete all as specified and as directed.
Returning, filling, including spreading, leveling, watering and well ramming in layers not exc. 25cm in soft/loose soil complete all as specified and as directed.
M&L for sand cushioning in trenches for cable protection including consolidation complete all as specified and directed.
Supplying and laying reinforced precast concrete cable cover, class EHV, type 1 with peak Class LV, Type I, flat, size 250mm x 150mm x 40mm complete all as specified and directed
Boring of holes under road, pavement, hard standing by trenches technology up to size 100mm complete all as specified and directed
M&L Cable joining kit for LT cable for outdoor teRMination in repair heat shrink type joint complete with joining material and accessories suitable for 3.5 core XLPE aRMoured aluminium conductor cable of size 25 sqmm to 50 sqmm complete all as specified and directed.
M & L for cross arms, bracing, supports, clamps and back plated fabricated from structural steel sections including nuts, bolts, washers, welding bending cold or hot drilling holes for bolts in any shape or size as directed inclusive of 2 coats of aluminium paint over a coat of red oxide primer after dismantling old unserviceable cross aRMs complete all as specified and as directed.
Dismantling cross-arms of M.S. channel or angle sections etc. complete all as specified and directed.
Taking out old unserviceable pipe line alongwith fittings from existing connections of size 80 mm dia complete all as specified and directed.
All as per item No. 200.00 above but of size 50mm dia.
All as per item No. 200.00 above but of size 25mm dia.
All as per item No. 200.00 above but of size 20mm dia.
Supply & Laying in trenches galvanised steel water tubing of medium grade with all fittings such as bends, elbows, tees, unions, nipples, short pieces etc as required at site of size 80 mm dia complete all as specified and directed. Note :- (i) Excavation and earth work shall be measured and paid seperately under relevant item of Sch A (ii) The rates quoted inclusive of cutting, jointing and testing of the pipe.
All as per item No. 204.00 above but of size 50mm dia.
All as per item No. 204.00 above but of size 25mm dia.
Supply & Fixing galvanised steel water tubing of medium grade with all fittings such as bends, elbows, tees, unions, nipples, short pieces etc and fixed complete to walls and ceilings or laid in floors all as directed of size 25 mm dia complete all as specified and directed. Note:- (i) The rates quoted inclusive of cutting, jointing and testing of the pipe.
All as per item No. 207.00 above but of size 20mm dia.
Excavation in trenches not exceeding 1.5M width and not exceeding 1.5M depth and getting out for laying of pipe etc in soft/loose soil complete all as specified and directed.
S&F gun metal gate valves with iron wheel head screwed at both ends for iron pipes complete including dismantling of old unserviceable gate valve fixed at any location of Size 50 mm dia complete all as specified and directed.
All as per item No. 210.00 above but of size 40mm dia.
M & L for rectification of joint leakage of CI/DI pipeline incl excavation, return filling, leadwool, lead pig, tyton Joint, 'D' Joint, MS Clamp and short piece of CI/DI pipes as required at site etc of size 300 to 400 mm dia pipe all as required complete all as specified and directed. Note:- Contractor will have to make arrangement for T&P, drain out/ pump out water. cutting of road/ path/culvert shall be make good as per original existing without any extra cost.
All as per item No. 212.00 above but of size 200 to 250 mm dia pipe.
All as per item No. 212.00 above but of size 100 to 150 mm dia pipe.
Repair to leakage of existing GI pipe line 15 mm to 20 mm bore in any positions (joints, fittings etc) on wall ,roof, floor etc including renewal of GI fittings such as tee ,sockets elbows,unions nipples,reducers etc incl necessary excavation and earth work complete all as specified and directed. Note:- (i) GI Pipe off size and Earth work for renewal of GI Pipe shall be measured and Paid separately under relevant items of this schedule.
All as per item No 215.00 above but GI Pipe of dia 25 mm to 50 mm dia
All as per item No 215.00 above but GI Pipe of dia 80 mm to 100 mm dia
M&L for 10mm thick rendering on the ‘other than fair faces' side of lathing in cement mortar 1:6 over brick/concrete surfaces complete all as specified and as directed.
M&L for 10mm thick rendering in cement mortar 1:4 over brick/concrete surfaces with water proofing compound as per manufacturer instruction, finished fair and even complete all as specified and as directed. Note:- Integral water proofing compound shall be measured and paid for separately under respective items.
M&L, precast reinforcement cement concrete 1:2:4 type B1 (using 20mm graded BT stone aggregate) including necessary form work as in manholes cover slab etc, set in cement mortar 1:4 complete all as specified and as directed.(Note:-Reinforecement shall be measured separetly)
M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out etc as in any type of soil complete all as specified and as directed.
Excavation in trenches n exc. 1.5 m wide and exc 1.5m deep and n.exc 3.0 m deep for foundation,etc.or for shafts, wells cesspits, manholes, pier holes,etc.n' exc.10 sq m on plan and getting out in any type of soil complete all as specified and directed.
Returning, filling in ,including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in any type of soil complete all as specified and directed.
Demolition and breaking up drain pipes of 150 mm internal dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.
M&L for cement concrete bed 1:4:8 type D2 (Using 40mm graded stone aggregate) for 150 mm dia drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; including use and waste of necessary form work complete all as specified and directed.
M&L for 150 mm dia internal bore Reinforced concrete pipes, class NP3, laid and jointed complete all as specified and as directed.
Demolition and breaking up drain pipes of 200 mm internal dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.
M&L for cement concrete bed 1:4:8 type D2 (Using 40mm graded stone aggregate) for 200mm dia drain pipes including forming cradles; in complete all as specified and directed.
M&L for 200 mm dia internal bore Reinforced concrete pipes, class NP3, laid and jointed complete all as specified and as directed.
Demolition/dismatling and breaking up drain pipes of any dia (Salt glazed ware, AC or Reinforced concrete ect ) set in cement mortar or fixed to wall etc complete all as specified and directed.
S&F, 110 mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
S&F, 75 mm bore, PVC (SWR) junction single (single T), equal or unequal, provided with access door complete all as specified and directed.
S&F, 110mm bore, PVC (SWR) junction single (single T), equal or unequal, provided with access door complete all as specified and directed.
S&F for PVC (SWR) vent cowl, 75 mm bore complete all as specified and directed.
M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.
Taking of liquid/solid content from sump/septic tank either manually or by pumping clearing thoroughly including disposal of liquid/solid content out of the Cantt Area ,depositing in pit and covering with layers of earth complete all as specified and directed .
M&L Surface dressing n.exc 15 cm deep and getting out in soft/loose soil complete all as specified and directed.
Excavation in post holes (or similar holes) n. exc 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm watering and removing surplus soil to a distance n. exc 50 and making good surface in soft/loose soil all as specified and as directed.
M&L for angle iron posts and struts in fencing including cutting tops to shape (swan neck) or as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work including 40x6mm flat iron for holding chain link fencing conforming to Fe-290 Gde E-165 complete all as specified and as directed.
M&L, preparation or new steel and iron surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Fixing only galvanised chain link fencing of 4mm dia GI wire including line wire standards rails straining bolts etc including provision of binding wire and mesh size as per direction of GE Gwalior & complete all as specified and as directed.
Supply only galvanised chain link fencing of 4mm dia GI wire including line wire standards rails straining bolts etc including provision of binding wire and mesh size as per direction of GE Gwalior & complete all as specified and as directed.
S&F, Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (Each line wire to be measured) complete all as specified and as directed.
M&L for PCC 1:3:6 type C2 (using 20 mm graded stone aggregate) for coping complete all as specified and as directed.
M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 surface finished even & rough for laying of wall tiles complete all as specified and as directed.
M&L two coats of cement base paint on new plastered surfaces complete all as specified and as directed.
M& L for preparation of new steel surface of any description exc 10 cm width or girth not otherwise described and applying Two coats of black enamelled paint over a coat of red oxide complete all as specified and as directed.
Dismantling stone slab, stone beams and type of any description or thickness laid bedded and pointed in any mortar in roof,floor etc. complete all as specified and directed.
M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed
M&L 60 mm thickness machine pressed precast concrete interlocking paver block M-35 any shape and size confiRMing to IS 15658-2006 in grey cement glossy finish rubber mould casted laid dry over sand cushioning complete all as specified and directed
Work will be executed inside Barrack Store yard of GE Gwalior and Officer/JCO/ORs Md accns /OTM building/ Office area as per requirement. It is the responsibility of the contractor to lift the furniture from store godowns/sites/accommodations for painting/polishing and to keep it back in store godowns/ sheds/office/Govt. Md accn/OTM and at any other location in a systematic manner as directed by Eng in Charge. It is the part of CA and to be included in the quoted rates by contractor.
Wooden Furniture:-Materials and labours for carrying out polishing one coat to wooden surfaces with french polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts. Complete all as specified & directed by Engr-in Charge/GE.
BED PLY : FD-213, FD-246
CHAIR DINING (JCO/ORS) : FD/MAP-II/05
CHAIR DINING : FD-16, FD-203, FD-228, FD-279, FD-1105
CHAIR EASY : FD-17(M), FD-201, FD-229, FD-281, FD-1108
CHAIR WRITING : FD-20(M), FD-202, FD-280
PEG TABLE : FD-25(M), FD-236, FD-277, FD-384
TABLE 900 MM X 600 MM OR (3' x 2') (WOODEN) W/O DRAWER : FD-42, FD-55, FD-223, FD-231, FD-284
TABLE 900 MM X 600 MM WITH DRAWER (3' x 2') (WOODEN) : FD-41, FD-224, FD-283
TABLE BED SIDE : FD-28, FD- 210, FD- 248, FD-276
TABLE CENTER : FD-29(M), FD-235, FD-274
TABLE DINING 4 PERSONS: FD/MAP-II/03, FD- 30(M), FD-239, FD-273, FD- 376
TABLE DRESSING GENTS : FD/E6/MAP/16, FD- 31(M), FD-230, FD- 379
TABLE DRESSING LADIES : FD/MAP-II/07, FD- 32(M), FD-251
Steel Furniture:-Materials and labours for carrying out painting (internally & externally) to steel surfaces with one coat of synthetic enamel paint of approve shade and quality over a coat of red-oxide primer after cleaning, dusting and scratching the entire metal surface with sand paper, taking out dents & filling with putty, making surface neat and smooth with standard workmanship. Complete all as specified & directed by Engr-in Charge/GE.
BED PLY TOP STEEL : FD/E6/MAP/08 ( R)
CHAIR VERANDAH : FD-19, FD-256, FD-359, FD/MAP-II/06, FD/E6/MAP/11
CHARPOY IP HARD TOP : FD/MAP-II/01
STEEL ALMIRAH MED : FD-243
Steel Furniture with some wooden parts :- Materials and labours for carrying out painting (internally & externally) to steel surfaces with one coat of synthetic enamel paint of approve shade and quality over a coat of red-oxide primer after cleaning, dusting and scratching the entire metal surface with sand paper, taking out dents & filling with putty, making surface neat and smooth with standard workmanship. Materials and labours for carrying out polishing one coat to wooden surfaces with french polish of approved make and brand after cleaning, dusting and scratching the entire wooden surface with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship. The polishing shall be carried out after making the article intact by tightening all parts. Complete all as specified & directed by Engr-in Charge/GE.
TABLE BED SIDE STEEL : FD/E6/MAP/15 ( R)
Jai Mahakaal Construction
SREE BABA TRADERS
M/s J.B. Construction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .