CONSTRUCTION OF CWSN TOILET AT GOVT HS TAGOOD, ZONE INDERWAL, DISTRICT KISHTWAR (2nd call)

Amount

Earth work in excavation by manual means over areas(exceeding 30 cm in depth and up to 1.50m depth 1.50 m in width as well as 10 sqm on plan ) , including disposal of excavated earth upto I metre for cutting of edges ,disposal earth to be leveled and neatly dressed.All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All works up to plinth level in 1:4:8 ( 1 cement 4 fine sand 8 graded stone aggregates), with 40mm nominal size of (crushed stone aggregates). including all lead lift and carriages

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All works up to plinth level in 1:3:6 ( 1 cement 3 fine sand 6 graded stone aggregates), with 20mm nominal size of (crushed stone aggregates). including all lead lift and carriages

Providing and laying of damp proof course of 50 mm thick with cement concrete 1:2:4 ( 1 cement 2 coarse sand 4 graded stone aggregates),mix with 20 mm thick crushed stone aggregates. including all lead lift and carriages

Common burnt clay F.P.S (non modular bricks of class designation 75 in foundation & plinth cement mortar 1:6 (1 cement 6 fine sand) including all lead lift and carriages

Extra for brick work in superstructure above plinth level upto floor V level (by manual mean)

Providing and laying in position of specified grade of reinforced cement concrete, excluding the cost of centering and shuttering finishing and reinforcement. All work upto Plinth level 1:1.5:3 (1 cement 1.5 coarse sand 3 graded stone aggregates 20mm nominal size )including all lead lift and carriages

Reinforcement of R.C.C work including straightening cutting,bending,placing in position and binding all complete.thermo mechanically treated bars including all lead lift and carriages

Centring and shuttermg including strutting, propping etc. and removal of form for foundation

Centring and shuttermg including strutting, propping etc. and removal of form for suspended floors, roofs, landings, balconies and access platforms

Edges of slab and breaks in floors and walls(under 20 cms wide)

Steel work welded in built up section, trusses and framed works including cutting , hoising, fixing in position and applying a priming coat of approved steel primer all complete including all lead lift and carriages

15 mm thick. Cement plaster in 1:6 (1 cement:6 fine sand ) ,including all lead lift and carriages

12 mm thick plaster in 1:6 , 1 cement:4 fine sand )including all lead lift and carriages

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,al! complete as per direction of engineer- in charge.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.Float glass panes 4 mm thick glass panes

50 mm thick cement concrete flooring 1:2:4 ( 1 cement 2 coarse sand 4 graded stone aggregates 20 mm nominal size) finished with floating coat of neat cement slurry but excluding cost of nosing of steps etc complete crushed. including all lead lift and carriages

Applying priming coat:with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting of doors and windows with ready mixed synthetic enamel paint of approved brand and manufacture in all shades.

White washing with lime to give an even shade with three or more coats for new work.

Making plinth protection 50mm thick with cement conc .(1:3:6) ,20 mm nominal size of stone aggregates over 75mm bed of dry brick ballast,40mm nominal size of well rammed and consolidated and grouted with fine sand including finishing the top smooth.including all lead lift and carriages

Filling available excavated earth(excluding rock) in trenches ,plinth,sudes of foundation etc.Layers not exceeding 20 cm in depth,conslidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m.

Providing and fixing Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of1st quality conforming to IS: 13755 of NITC.O, ORIENT,SOMANY, KAJARIA or equivalent make in colour such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 ( 1 cement : 4 coa.rse sand) including pointing the joints with white cement and matching pigment etc., complete

Providing and fixing 1st quality ceramic glazed tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shades except begundy, bottle green, black of any size as approved by Eningeerin-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing white vitreous china pedestal type water closet ( European type) with seat and lid , 10 litre low level white vitreous china flushing cistern and CP flushwith fittings, C.I./M.S. brackets 40mm bend diameter flushbend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required:W.C. pan with lSI marked white solid plastic seat and lid. with white vitreous china flushing cistern & C. P. flush bend.

Providing and fixing wash basin with C. I./M.S. brackets,15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings andbrackets, cutting and making good the walls whereverrequired:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brasspillar taps

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 30x260x350mmand 340x41 Ox265 mm sizes respectively with automatic flushing cistern with C. I./M.S. brackets standard size of G. I. flush pipe and C.P. brass spreaders with brass unions and G. I. clamps complete, including painting of fittings and brakets, cutting and making good the wafls and floors wherever required:One urinal basin with 5 litre P.V.C white automatic flushing cistern of approved quality.

Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screwswith concealed fitting arrangement of approved quality andcolour 600 mm long towel rail with total length of 645 mm, 78 mm wide and effectiveheight of 88 mm, weighing not less than190 gms.

Providing and placing on terrace ( at all floor levels) polyethylene water storage tank lSI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank [Sintex, Electroplast, Star, Lotus or equivalent having valid lSI license].

Providing and fixing G.l. pipes complete with G.l. fittings and clamps, including cutting and making good the walls etc (INTERNAL WORK-Exposed on wall (15 mm dia. nominal bore) medium

Providing and fixing G.l. pipes complete with G.l. fittings excluding trenching and refilling etc. (external work) 20 mm dia. Gl pipe Medium)

Providing and fixing brass bib cock of approved quali1ty. 15 mm nominal bore

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighingnot less than 810 gms. 15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixerand gyser points of approved make conforming to IS : 8931 (15 mm nominal bore)

Providing and fixing PVC waste pipe of sink or wash basin including PVC waste fitting complete. 32 mm dia

Providing and fixing 100 mm sand cast iron grating for gully, floor or Nahani trap.

Providing and fixing PVC soil waste / rain water disposal pipe 100mm dia

Providing and fixing PVC Bend 100 MM dia

Steel work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.including all lead lift and carriages

Electric wiring with 1.5 sqm coppper cable including 20mm dia 2 mm thick PVC pipe 5 amp with socket box connnection to the main pole completed as dircted by the site engineer incharge

Anil Kumar

BILAL AHMED