PROVN OF PARKING SHED FOR 6AFH SOLAR REFLECTIVE FLIMS TO ADM FACULITY WASH BASIN AND INTERLOCKING TILES FOR SMC

Amount

S&F for Solar control film 50 micron thk reflective type sticked to glass panes as per instructions of manufacturers, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) to stone and rubbish off the premises complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified.

M&L for Cement concrete type B-1,1:2:4 (20mm graded aggregate) 25mm thick for sub base of floors complete all as specified and directed.

M&L for Screed bed or bedding layer of mortor 20 mm thick in CM 1:4 for laying floor finishes all as specified and directed.

M & L for Non-skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 Sqm but exceeding 0.11 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface all as specified and as directed by Engr-in-charge..

M&L for brick work with flyash bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:6 complete all as specified and directed.

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces with CM 1:4 as in backing coat of skirting /dado all as specified and directed.

M&L Rendering 15 mm thick in CM 1:4 with WPC on fair faces of brick work or concrete surfaces, finished even & smooth without using extra cement. all as specified and directed. (Note: WPC shall be measured and paid separately)

Supply only Intergral waterproofing compound

M & L Glazed coloured ceramic tiles in vertical surface 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface all as specified and as directed by Engr-in-charge..

M&L for 20mm thk Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) us?ing marble dust with admixture of pigment to match with shade of granite. complete all as specified.

M&L for Providing Rounding to edges of stone slabs one edge,such as in steps, cooking platform, and other similar situations, complete all as specified as directed.

S& F for Vitreous China wash basin, white, flat back, size 630x450mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specifed and directed.

S&F for Pillar taps clinical fancy type cast copper alloy, with capstain head, chromium plated screwed down high pressure, with long shanks and fly nuts screwed for iron pipe and fixed 20 mm bore. Make : CERA, Model : F-9030101. complete all as specified & directed.

S & F PVC connections 15 mm size with PTMT nuts of length 450 mm

S&F for chromium plated fency type stop valves, cast copper alloy, screwed down high pressure with crutch or butterfly handles screwed both ends for iron pipes or for unions and fixed. 20 mm size.

S&F Unplasticised PVC of 20mm dia pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type, complete all as specified.

S & F in towel rail 60cm long of aluminuim anodised fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 190 gms).

S&F in sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated brackets guard and raling 60 cm long complete all as specified and directed

S&F 32mm thk Waste fittings, brass, chromium plated for glazed ware sinks, basins,etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and directed.

M & L 75mm dia for PVC (SWR) multi floor trap of with grating including jointing with solvent cement etc complete,

S & F 75mm dia PVC (SWR) pipe single sockted in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed.

S&F 75mm radius PVC (SWR) bends complete all as specified and directed.

S&F 50mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors,complete all as specified.

M&L for applying two coats of cement base paint over primer on newly plastered surfaces of walls including preparation of surfaces all as specified and directed.

Demolition of (Unreinforcement) Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M&L for plain cement concrete 50 mm thick of 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) as in levelling course of sub floors, sub-base, floors and paving etc., complete all as specified and directed.

M&L for 50 mm thick sand felling under floors or in foundation including watering and consolidation, complete ,all as specified.

M&L for 60mm thick M-35 grade machine pressed concrete interlocking paver block any shape and size confirming to IS 15658-2006, jointed with grey cement and no pigment, complete, all as specified.

M&L for Providing cement concrete of 1:2:4, type B1 (20mm greaded aggregate) in coping, roof kerbs or mud stops, rounded or chamfered on edges, complete, all as specified and directed.

Removal of debris/building material out side the campus including loading and unloading, etc to a distance exc 5Km but n exc 10 km out side the MD land complete all as specified and directed. Note:- Location and permission of depositing the building materials/debris disposal outside the MD land shall rest with contractor at his own arrangement.

M&L for Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in any type of soil.

M&L for cement concrete Type B2 1:2:4 (40mm graded aggregates) in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases), complete all as specified.

S&F for plates Fe 410-W (Gde?E- 250) quality A (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes,with riveted, bolted or welded attachment, complete all as specified.

Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161 1979 grade St.-240, complete all as specified.

M&L for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified..

S & F Plain, galvanised, mild steel sheeting 1 mm thick, in valley gutters (length and girth as fixed) with grade of zinc coating 275, complete all as specified.

M&L preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.

S & F in repairs 110mm dia PVC (SWR) pipe single sockted in any length with rubber ring joints fixed to wall with clamp complete all as specified and directed.

S&F 110mm radius PVC (SWR) bends complete all as specified and directed.

Surface excavation not exc 30 cm and averaging 15 cm deep and getting out in any type of soil, all as specified.

M&L for 100mm thick broken stone or boulder,Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified.

M&L for Providing cement concrete of 1:2:4, type B1 (20mm greaded aggregate) in coping, roof kerbs or mud stops, rounded or chamfered on edges, complete, all as specified and directed.

Removing excavated soil not exc 50m and depositing where directed at a level not exc 1.50m above the starting point, complete all as specified.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;, complete all as specified.

TECKXPERT ENTERPRISES (BID ID -3358888)

NAVEEN ENTERPRISES (BID ID -3362459)

SEMBA ELECTRICALS (BID ID -3362322)

K C ASSOCIATES (BID ID -3361842)

joepowercorporation (BID ID -3361770)

RISHAN INFRA ENTERPRISES (BID ID -3361133)