CA NO. GE AF NO.1/GUR-20/2023-24 SPECIAL REPAIR TO ROOF, IMPROVEMENT TO GATE AND CERTAIN OTHER SANCTIONED WORK AT AF STATION PALAM UNDER GE (AF) GURGAON NO.1 .

Amount

Dismantling of existing roof treatment of any description/ thickness including demolition of water proofing plaster etc complete all as specified and as directed by Engr-in charge.

M&L for 15 mm thick cement plastering in CM 1:4 on brick/concrete surfaces of roof and parapet, mixed with water proofing compound, finished even and smooth without using extra cement (Including 4 Story building) complete all as specified and as directed by Engineer-in-Charge. Note :- Water proofing compound shall be measured & paid separately under respective item of schedule.

Supply only liquid water proofing compound complete all as specified and as directed by Engr-in charge.

Cleaning top surfaces by brooming, wire brushing, removing grass, raking out joints to receive plaster and removing debris, grass etc outside the defence land complete all as specified and directed by Engineer-in-Charge. Note :- 1. Plaster shall be measured and separately under appropriate item of Sch ‘A’. 2.Rate of this item is inclusive of diconnect fitment at water tank, electrical LA, earthing strip or solar heater etc and refixing in the same position after compeleting of roof treatment.

M&L for applying 3.00mm thick APP based polymer membrane by torch application for sealing joint over 85/25 industrial bituminous coat @ 1.20Kg/Sqm over bituminous primer @ 0.30 Ltr/Sqm on newly plastered clean and dry roof surface complete all as specified & directed by Engr-in-charge.

Taking down plain / corrugated roof sheet of any description including removing from site complete all as specified and directed.

M&L for prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screw including rubber washer complete all as specified and directed by Engr-in-Charge. (Note :- Rate included for taking out and re-fixing of existing electric wire with all necessury fittings, four storey building including scaffolding work and all safety measures)

M&L for pre painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in Ridge and Valley/Gutter fixed with self tapping screw including rubber washer complete all as specified and directed by Engr-in-Charge. (Note :- Rate included for taking out and re-fixing of existing electric wire with all necessury fittings, four storey building including scaffolding work and all safety measures)

Dismantling wought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-Charge.

M&L Structural steel work as in roof trusses (framed) trussed,purlines,crane,gantries,rails and fastening and heavy bracket framing beams,tee,angle, channel or flat sections) including distance pieces etc confirming to Fe 410-W(GdeE-250) quality 'A' complete all as specified and as directed.

M & L Preparing newly untreated steel surfaces of any descripton over 10 cm wiidth or girth and applying two coat of synthetic enamel paints over a coat of red oxide primer complete all as specified and as directed.

Taking down Cement Plaster/Grit plaster from wall and ceiling of any description from Brick/concrete surfaces including raking out Joints, hacking for Key, scrubbing down with Water, etc., and removing same from the Site(s), complete all as specified and as directed. (Note :- Rate included for four storey building including scaffolding and all safety measures)

M&L for 15mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces including finishing even and smooth without using extra cement all as specified and as directed by Engineer in Charge.

M&L for 5mm thick rendering in CM 1:3 on concrete/gunniting surface as in ceiling finished even and smooth without using extra complete all as specified and directed by Engr-in-charge

M&L for 15mm thick rendering on brick or concrete surfaces in internal surfaces in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand: 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified (Payment for providing grooves shall be made separately) complete all as specified and as directed.

M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge.

M&L for preparing new plastered walls surface and applying two coat of exterior emulsion paint 100% acrylic of approved colour over a coat of primer including 1 to 2 mm thick birla putty punning including necessary scaffolding upto 4th floor complete all as specified and as directed by Engineer-in-charge. .

M&L for preparation of plastered or un plastered new decorated surfaces of ceiling by Vacuum based sanding machine all as specified, filling cracks/hole by applying wall care putty and applying two coat oil emulsion distemper white or coloured by auto roller complete all as specified & directed by Engineer-in-Charge.

M&L for preparation of newly plastered surfaces of walls by Vacuum based sanding machine and applying cement based wall care putty 1 to 2mm thick as required (multi purpose mixer shall be used for uniform and proper mixing of putty) and applying two coats oil emulsion distemper white or coloured over one coat of approved wall primer by auto roller complete all as specified & directed by Engineer-in-Charge.

M&L for plain cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in coping, benching, bed block, window cills, hold fast etc complete all as specified and as directed by Engr-in-charge

Demolition of Cement Concrete (un-reinforced) of any description, not exc. 150mm thickness (above or below Ground Level) and removing the same from Site(s), complete all as specified and as directed.

M&L for 75mm thick PCC 1:3:6 Type C2 (using 40mm graded stone aggregate)as in plinth protection and courtyard, finished even and smooth/fair with out using extra cement complete all as specified

Dismantling of wall and ceiling boards (Fibre, pulp, insulation, wooden etc.) or insulation board / slabs any thickness including cover fillets complete all as specified and as directed.

M&L for GI frame work for seamless ceiling comprising of GI perimeter chennel 0.55mm thick with two unequal flanges of 20 and 30 mm web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intrmediate channel 0.90 mm thick having two equal flanges of 15mm each and web of 45mm seuspended from sofits at approx 900 mm centre to centre with and including ceiling section (not exc 1.2m length) of 0.55 thickness having kurld web of 50mm and flange of 26mm ech with lips of 10.5 mm fixed to the intermediate chennel with connecting clip across the intermediate chennel at 457 mm centre to centre, completed all as specified. (Note :- Rate included for taking out and re fixing of existing electric wire, ceiling light, ceiling light Fan with all necessury fittings, four storey building including scaffolding and all safety measures)

M&L for providing and fixing Glass Reinforced Gypsum Board (GRG) 12mm thick in ceiling fixed with screw as per manufacturer's instructions, applying wall care putty and applying two coat oil emulsion distemper white or coloured by auto roller complete all as specified & directed by Engineer-in-Charge. complete all as specified and directed. (Note :- Rate included for taking out and re fixing of existing electric wire, ceiling light, ceiling light Fan with all necessury fittings, four storey building including scaffolding and all safety measures)

Galvanised Steel Water Tubing 20mm Bore (dia), ‘Medium Grade’ with all ISI marked Fittings, fixed to concealed or on walls, ceiling or laid in floors or any other situation including taking up down unserviceable steel water tubing with fittings and connections, etc. complete all as specified and as directed.

Galvanised Steel Water Tubing 25mm Bore (dia), ‘Medium Grade’ with all ISI marked Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation including Taking up or down unserviceable Steel Water Tubing with Fittings and Connections, etc. complete all as specified and as directed.

Removal of debris/malwa/ excavated surplus earth to a distance exc 10 Km but n exc 15.00 Km out side MD land and depositing complete all as specified and as directed.

M&L for preparation of newely plastered ceiling surface and applying three coats of white wash complete all as specified and directed.

M&L for preparing new plastered walls surface and applying two coat of exterior acrylic emulsion paint (100% acrylic) of approved colour over one coat of wall primer including 1 to 2 mm thick cement based wall putty punning including necessary scaffolding upto 4th floor complete all as specified and directed by Engineer-in-charge.

Demolition of brick work or stone/boulders masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etac but excluding ashlars facings, dressed stone work and precast concrete articles complete all as specified and directed by Engineer-in-Charge.

M&L for brick work with sub class 'B' old size bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4, complete all as specified and as directed by Engr-in-charge

S&F Galvanised Steel Water Tubing 15mm Bore (dia), ‘Medium Grade’ with all fittings, fixed to concealed or on walls, ceiling or laid in floors or any other situation including taking up down unserviceable steel water tubing with fittings and connections, etc. complete all as specified and as directed.

Taking down existing water tank of capacity 500 to1000 ltrs and refixing after necessary water proofing treatment on roof including all fitting as reqiured complete all as specified and as directed

S&F in repair 1000 ltrs rotational moulded polyethylene three layered with EPI coated water storage tanks (cylindrical vertical with closed top) hoisted and fixed with all necessary fittings i in position including taking down existing water tank of 500 to 1000ltrs and removing of existing RCC old tank from site complete all as specified and directed by Engr-in-charge .

S&F in repair stack clamp made out of GI angle and 10mm dia U bolt and nut with washer for 75 and 100 mm dia pipe complete all as specified and directed by Engr-in-charge .

S&F in repairs ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 25 mm bore complete all as specified and directed by Engineer in charge.

S&F in repairs, 20 mm Bore gun metal Gate/Globe half turn valves with iron wheel/Lever fixed-in-repairs complete all as specified and directed by Engineer in charge.

M&L for gunniting RCC works in coloum, beams, slabs, ceiling,Chajjas,Facia, landing, balconies etc by remiving loose concrete including plaster, cleaning of surfaces with wire brushes and supply and fixing welded steel wire mesh 75 mm x 75 mm with 3 mm dia steel wire as facias/drops amd similar works etc and applying an epoxy resin concrete bonding agent treatment over the old concrete surface to bond with the new concrete with Nitobond EP of M/s Pidilite/M/s BASF (as per manufacurers instruction) to bond old and new concrete, gunniting with minimum pressure of 2.5 Kg per Sqcm in two layers of total avg thickness shall be 40 mm thich with cement mortor (1:2) using ordinay portland cement of 53 grade mixing with waterproofing admixture polycrete @ 2% by weight of cement complete all as specified and directed by Engr-in-Charge. Note:- The following itemw shall be deemed to be included in quoted rate.1) Reinforcement required shall be deemed to be included in this item . 2) After placing the reinforcement all concrete surface shall be throughly scrubbed with brush, washed with water and allowed to dry for plastering. 3) Work is to carried out in patches. 4) Rate for scaffolding etc shall be deemed to be included in quoted rate. 5) Gunniting at Ground floor to 4 th story. 6) Anti-corrosive protective coating for reinforced bars 7) 15 mm plaster in CM 1:4 shall be done on Gunniting area (8) All demolished material removed from MOD land completely

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers n exc 25 cm complete all as specified and as directed.

Removal of excavated material/surplus soil to a distanceexc 1.5 KM but not exc 15 KM and depositing where directed at a level n exc 50m above the starting point complete all as specified and as directed.

M&L for plain cement concrete 1:4:8 type B-2 ( using 40 mm graded stone aggregate) as in foudations, filling and mass concrete complete all as specified and directed by Engr-in-charge

M&L RCC M-20, A-1 (1:1.5:3 using 20mm graded crushed stone aggregate ) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basementslabs, under-reamed pilesand mass concrete,complete all as specified and directed.

M&L RCC M20 A-1 (1:1.5:3 using 20mm graded crushed stone aggregate ) for columns, pillars,piers,posts and struts complete all as specified and directed.

M&L formwork to rough finish surface of flat sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

Ditto All as per item No 47 as above but to sides of rectangular pillars, posts, columns etc. all as specified

M&L for MS TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and incl MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Ditto as per item as above 6mm to 8 mm as in stirrups, spacers & binders for cutting complete all as specified and directed by Engr-in-Charge.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6 metre mean radius built in cement motor 1:6 for motor foundation complete all as specified and directed.

M&L Rendering 15mm thick in cement mortar in 1:4 in two layers with backing coat 10 mm thick and second coat 5 mm thick with WPC on fare face of brick work or concrete surfaces even and smooth without using extra cement. Note WPC shall be measured and paid separatly.

BLANK

M&L preapring newly plasetered surfaces of wall and applying two coat of cement base paint complete all as specified and directed.

S&F framed work as in gates manufactured out of angle or other section with gusset plate grills, braces etc complete. FE -410 W Gde E 250 QUALITY 'A' complete all as specified and directed.

M & L preparation of new steel surfaces of any description exc 10 cm width or girth and applying two coat of synthetic enamel paint over red oxide complete all as specified and directed

M&L Marble work 18 to 20mm coloured (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as spd and directed by Engg-in-charge.

M & L for 100mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base complete all as specified and directed.

M&L sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for 60mm thick machine pressed precast concrete interlocking paver blocks any tiles any size and shape factory casted with grey cement and pigment and conforming to IS 15658-2006 of M-35 Grade and joints filled inclding dismantling of tile complete etc complete all as specified.

M&L chequred cement concrete tiles 30 cm x 30 cm x 25 cm thick glossi finish set and jointed and pointed in neat cement slurry with grey cement and pigment in floors including 20 mm screed bed in CM 1:6 complete all as specified.

M&L for precast cement concrete block type B1, 1:2:4 (size 900x300x125mm) as in Kerb stone, etc and set in CM 1:4 complete all as specified and directed.

M&L hardcore below sub base of guage n. exc. 63mm with broken stone or boulders complete all as specified and directed.

M&L for stainless steel as in railing and studs using hollow tubes of grade 304 for posts including all necessary fittings and similar works complete all as specified and directed.

M&L for providing Plain Alluminium plain sheets0.56mm thickness alloy of 31000H4 in rectangular plates for board and frames and similar work as required shape and including provision of letters SS with hight of 300mm including all necessary fittings complete al as specified and directed

M&L for plain cement concrete 1:4:8 type B-2 ( 40 mm graded stone aggregate) as in foudations filling and mass concrete complete all as specified and directed by Engr-in-charge.

M&L reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, and similar work complete all as specified and directed by Engr-in-charge.

M&L reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in slabs supported on walls, beam and column and shelves etc complete all as specified and directed by Engr-in-charge.

M&L reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate)) as in chajjas and shelves etccomplete all as specified and directed by Engr-in-charge.

M& L for form work to soffits of suspended slab such as roof slabs etc complete all as specified and directed by Engr-in-charge.

M&L for Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed by Engr-in-charge.

M&L Rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement

M&L preparing new surfaces of walls and applying two coat of Oil bound distemper on new surface all as specified.

S&F for anodised powder coated aluminium frame (minimum 50 micron powder coating) for doors, windows, ventilators with one or more rebates including cleat for fixing etc . Complete all as specified.

S&F anodised aluminium powder coated (thickness or powder coating not less than 50 micron)three track window ,ventilator shutters aluminium section weighing 0.55 Kg/m including neccsary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each shutter,including all fittings anodised aluminium snap beading screws etc complete all as specified

S&F 4mm thick sheet glass for window/ventilators ordinary quality and glazing with rubber beading in square exc 0.50 Sq.m in each pane complete all as specified and as directed.

S&F for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all s specified

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube in opening as per specification & drawing mentioned in SSR complete all as specified and directed by Engr-in-charge.

S & F of factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' chanel having PVC sheet strips of 20mm width stuck inside with solvent cement for style and plain colour PVC sheet for top rail,bottom, lock rails on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet, beading, and joined together with solvent cement, suppliing and fixing in the frame at site as per specification , complete all as specified and directed.

S&F for stainless steel butt hinges with stainless steel pins 100mm size complete all as specified and directed.

S&F for aluminium anodised barrel tower bolts of extructed section of size 150mm length complete all as specified and directed.

S&F for 150mm extrded aluminium alloy handles, fabricated type anodised complete all as specified and directed.

S&F Aluminium anodised tubular towel rail 20mm dia D type 60cm long between flange complete all as specified and as directed.

S&F for aluminium alloy anoidised 300mm long sliding door bolts with hasp and stap(bolt type) and fixing clip of sheet cast or extruded section and fixing bolts and sliding bolts od extruded section or cast aluminium alloy length of boltt 300mm complete all as specified and directed.

Removing excavated material (soil) not exceeding 50 M and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and as directed.

M&L for 15mm thick cement plaster in CM (1 : 4) with a mixture ofwater proofing compound @ 3 % by weight of cement on driedconcrete surface finished fair and even without using extra cement .Note :- Water Proofing Compound shall be measured seperately

BLANK

M&L PCC (1:2:4) type B-2 (using 40mm graded agg) 75mm thick as in plinth protection complete all as specified and directed.

E/M Portion

Supply and fixing LED post top lantern LED type of capacity 40 watts , 230 volt AC outdoor tye with decorative post top for 360 degree indirect light IP65 protection with impact and corrosion resistant comlete with drivers and lamp and all accessories and making all necessary connection including fixing a pillar post/wall of any type and size with GI pipe as suitable size for fixing in pillar including necessary PCC wall and electrical connection complete with wire of size 1.5 sqmm 03 core as directed

Supply and fixing 150 watt energy , saving environmental friendly, long life exclusive innovative die-cast aluminium IP65 flood light with high power LEDs as light source, suitable for highlighting architectural features or retail spaces, prewired upto connector including 4 Sqmm 3 Core PVC insulated cable for making connection on pole/truss/wall with clamps made out of MS flat iron of size 25mm x 5mm with nuts & bolts all as specified and directed

Material and labour for XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade with cross sectional area of the following size 10 Sqmm 2 core complete all as specified and directed by Engineer-in-Charge.

M&L for cable PVC insulated FRLS unsheathed copper conductor cable of size 2.5 Sqmm 2 single core phase and neutral including 1.5 sqmm earth continuty conductor complete all as specified and directed. NOTE : PVC caping/conduit will be measured separately

Supply and fix in repair PVC conduit 20mm width size including all fittings and fixtures complete all as specified and directed by Engineer-in-Charge.

Earthing complete with galvanised steel earth plate electrode 60 cm x 60cmx 6 mm thick buried directly in ground vertically to a depth not less than 2.25 mtrs below ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level connected to galvanised iron strips 32 x 6 mm by means of nuts both check nuts and washers made of galvanised iron or steel earth strip protected by galvanised iron pipe 40 mm bore medium grade upto ground level as directed and including concrete pit in PCC ( 1 : 3 : 6) type C1 pre cast RCC cover slab 30 cm x 30 cm x 10 cm thick including reinforcement with 8 mm dia steel deformed bars at the rate of 10 cm both ways with one lifting handle made of 8 mm dia MS bar funnel, wire mesh 20 mm bore galvanised iron or steel pipe medium grade for watering charcoal on coke and salt in alternate layers, necessary excavation and earth work in any type of soil complete all as shown in electrical plate No 5 of MES schedule Pt-I and testing on completion

Supply and fixing non transparent looping SMC kiosks pole box 2 phase of suittable size made out of engineering plastic one piece moulding siemens gray colour with hold fast including 2 Nos aluminium strips 60 amp of requird size fixed on unbrakable insulator necessary electrical connection with proper lugs, glands, etc and fixing on wall/pole/truss with clamps made out of MS flat iron of size 25mm x 5mm with nuts & bolts complete all as specified and directed

Material and labour in replacement for point wiring (concealed) in and including rigid non metallic PVC heavy duty conduit, 19/20 mm dia/suitable size as per site reqmt including cutting chases for conduits, sinking for boxes for concealed conduit wiring with 1.5 sqmm FRLS PVC insulated unsheathed multi stranded copper conductor cable in and including flush type metal boxes modular type suitable for fixing modular switches, sockets, fan regulators etc with brass screw, cup washer and including PVC insulated unsheathed multi stranded copper conductor cable of 1.5 sqmm as earth wire connected to common earth and earth dolly as per IS specification and as specified for the One light/fan/bell point controlled by one switch.

All as per item No 97 here-in-before but for one 3 pin socket outlet 5 Amps, independent board.

All as per item No 97 here-in-before but for one 3 pin socket outlet 5 Amps,on the same board.

All as per item No 97 here-in-before but for one 3 pin socket outlet, 15 Amps, on the independent board with cables 4.0 Sqmm.

M&L for concealed sub main wiring alongwith earth wire,concealed in walls/ floors or fixed in wall/ceiling, including the cutting of chases and provision of PVC conduit (heavy grade), and making good to surface to match the original surface, with the following sizes of FRLSH PVC insulated unsheathed copper conductor, single core cable in PVC conduit (Heavy grade) of size 2 x 4.0 Sqmm + 1 x 4.0 Sqmm earth wire complete all as specified and directed by Engineer-in-Charge.

M&L LED box channel luminarie made out of CRCA sheet suitable for 1 x 20 Watt LED T8 including LED T8 tube, IP 20 complete all as specified and as directed.

M&L for modular switch 1 way, 6A, 1 module complete all as specified and directed.

M&L for modular switch 1 way, 16A, 1 module complete all as specified and directed.

M&L for socket, modular, 6A-2/3 pin combined, 2 module complete all as specified and directed.

M&L for socket, modular, 6A/16A -2/3 pin combined, 2 module complete all as specified and directed.

M&L for ceiling rose 63.5x23.5 mm 3 terminals, PVC/Polycarbonate, isolated body complete all as specified and directed.

M&L for modular white cover plate with frame, 6 module complete all as specified and directed.

M&L for modular white cover plate with frame, 3 module complete all as specified and directed.

M&L for modular metal flush box, 6 module complete all as specified and directed.

M&L for modular metal flush box, 3 module complete all as specified and directed.

S&F sheet metal eoclosure for DBs when MCBs to be used single pole neutral 8 way, double door 415 V rating complete all as specified and directed.

S&F MCB, islolator , breaking capacity min 10KA,'C' curve 230V, 40 Amps complete all as specified and directed.

S&F MCB, SP, breaking capacity min 10KA,'C' curve 230V, 6 to 32 Amps complete all as specified and directed.

Note:- The amount of Rs 149350/- against Schedule of Credit on Page No 147 shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance

SM CONSTRUCTION COMPANY

M/S Parshant Associates

M/S RK Builders

kailash chawla