Construction of Community hall cum Work Shed under Simariya Bhindi Panchayat (Thana no-59, Khata no-585, khesra-2340, Rakwa- 11 D.) ( Block-Kalyanpur, Dist-Samastipur)

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m

All kinds of soil.

Earth work in excavation in foundtion trenches or drains (not exceeding 1.5m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m.

All kinds of soil

providing designation 100A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per specification and direction of E/I

1:2:4(1 Cement:3 coarse sand: 6 graded stone aggregate 20mm nominal size)

Reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete.

Thermo-Mechanically Treated bars TMTC-500-12mm dia

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type,core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:

30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Steel work welded in built up sections/framed worK including cutting hoisting, rixing in position and applying a priming coat of approved steel primer using structural steel, etc. as required.

In gratings, frames, guard bar, ladders,

Providing and fixing aluminium handles anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc. complete:

Twin rubber stopper

Windows

Steel windows

Providing and fixing circular cast iron box for ceiling fan clamp 140 mm internal dia, 73 mm height, 5 mm thick rim bottom and top lids, 1.5 mm thick M.S sheet with its top surface hacked for proper bonding top lid shall be screwed into the cast iron box by means of 3.3 mm dia round headed screws, one ;pcf at the corners. Clamps shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing.

Providing and fixing hand rail by welding etc. to steel ladder railings & staircases railing including applying apriming coat of approved steel primer

Cement concrete flooring 1:2:4(1 cement:2 coarse:sand:4 graded stone agregate) finished with a floating coat of neat cement including cement slurry, etc. but excluding the cost of nosing of steps etc. complete.

40 mm thick with 20 mm nominal size stone aggregate

Cement plaster skirting (upto 30 cm hieght) with cement mortar 1:3 (1 cement:3 coarse sand) finished with a floating coat of neat cement

18 mm thick

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:15622(thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12mm thick bed of cement Mortar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

12mm cement plaster of mix:

15mm cement plaster on the rough side of single or half brick wall of mix:

1:6(1 cement: 6 course sand)

6mm cement plaster to ceiling of mix:

1:4( 1 cement: 4 coarse sand)

Two or more coats on new work

Cement primer

Distempering with dry distemper of approved brand and manufacture (two or more coats ) and of required shade on new work , over and including priming coat of whiting to give an even shade.

Applying priming coat:

With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:

Two or more coats on new work over an under coat of suitable shade with ordinary pain+ of approved brand and manufacture

Carriage of Materials:-

Bricks

Stone chips 30 km

Coarse sand 30 km

Local Sand - 3 KM( Lead 1K+2P)

Bricks

Cement

C/sand for royality

Providing & fixing information board E/I

Providing & fixing inaugration board E/I

Seigniorage Fee

Stone chips

Coarse Sand

Local Sand

Brick

Boundary

Providing designation 100A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/I.

Steel work welded in built up sections/framed worK including cutting hoisting, rixing in position and applying a priming coat of approved steel primer using structural steel, etc. as required.

In gratings, frames, guard bar, ladders,

15mm cement plaster on the rough side of single or half brick wall of mix:

1:6(1 cement: 6 course sand)

Carriage of Materials:-

Bricks

Stone chips 30 km

Coarse sand 30 km

Local Sand - 3 KM( Lead 1K+2P)

Bricks

Cement

C/sand for royality

Seigniorage Fee

Stone chips

Coarse Sand

Local Sand

Brick

Group-A

Supplying and fixing metal/pvc box of 180mm X 100mm X 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connections, painting etc. as required.

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

Supplying and fixing batten/ angle holder including connection etc. as required.

Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 6/32 amps, Single pole

6/32 amps, Single pole

6/32 amps, Double pole

Providing and fixing following capacity double pole/ four pole OFF-load changeover switches with side handle operation, in sheet enclosure in existing metal board, including drilling holes in metal panel, making connections etc. as required.

63 Amp, double pole

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc with charcoal/coke and salt as required.

Supplying and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.I. pipe from earth electrode including connecion with copper thimble excavation and refilling etc. as required.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall

15 mm nominal outer dia Pipes

20 mm nominal outer dia Pipes

25 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

15 mm dia

25 mm nominal bore

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work)

20 mm nominal bore

25 mm nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

White Vitreous china Orissa pattern W.C. pan of size 580 x 440 mm with integral type foot rests.

Providing and fixing on wall face unplasticised-PVC (working pressure 4 Kgf per sqm) rain water pipes conforming to IS:4985including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion

110mm diameter

Providing and fixing on wall face unplasticised -PVC moulded fittings/ accessories for unplasticised PVC rainwater pipes conforming to IS:4985 including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion.

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised-PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S screws of required length including cutting brick work and fixing in cement mortar 1:4( 1 cement: 4 coarse sand) and making good the wall etc. complete.

Provision for eletric Moter with all accessories and fitting

Providing all tools and doing boring suitable for lowering 40 mm dia pipe by jet or Dhekhi process and lowering 40 mm dia G.I. Pipes and strainer with shoe plug all complete.

Providing all tools and labour and fixing hand pump no.6 etc. all complete including leather flap valve and bucket nuts and bolts if necessary.

Developing and testing of tube well till the discharge is free from sand.

Carriage by bullock cart or any suitable means including loading, unloading of one set of Tube Well, materials to work site including bamboo, rope, T & P, etc including returning back surplus materials from work site to store as per direction of E/I. (average lead 25 km has been considered for payment )

Providing 40 mm dia light quality, galvanized mild steel pipes conforming Io relevant ISS.

Supplying 40mm dia blue casting P.V.C pipe of approved quality with shoe plug.

Providing 40 mm × 2 m long P.V.C. ribbed Strainer of approved quality with shoe plug conforming to relevant ISS.

Supplying shallow well hand pump…(Singur)

Supplying all materials and labours of brick masornary palteform of size 1.20 X 1.20m with top and side finished with 12 mm CP (1:3) with beat cement pinning for the funish all around as per specification and direction of E/I.