REPAIR REPLACEMENT OF SANITARY FITTINGS LEAKAGE SEEPAGE CONNECTED AND MISC BR NATURE WORK IN MOHAN ENCLAVE IN THE AREA OF AGE BR II WEST UNDER GE WEST DELHI CANTT 10

Amount

NOTE FOR ALL ITEMS (READ CAREFULLY BEFORE QUOTING RATE):- 1. Work execute in multy storey buildings. 2. During the execution of work, In case of any damage to the GAS PIPE LINE or water supply pipe etc., the contractor will have to get it repaired/replaced at his own cost and nothing extra payble on this acount. S&F 110mm bore PVC (SWR) pipes single socketed, in any length including mild steel stack clamps (as per sample) fixed in cement concrete 1:2:4 blocks with rubber ring joints fixed to walls and including taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc removal rubbish beyond MOD land complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length including mild steel stack clamps (as per sample) fixed in cement concrete 1:2:4 blocks with rubber ring joints fixed to walls and including taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc removal rubbish beyond MOD land complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction single, (Single T) with access door equal or unequal complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends with rubber ring joints fixed to walls complete all as specified and directed.

S&F 110mm bore PVC (SWR) bends with access door with rubber ring joints fixed to walls complete all as specified and directed.

S&F 110mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F 75mm bore PVC (SWR) vent cowl complete all as specified and directed.

S&F 75mm bore PVC (SWR) bends with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repairs 100mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repairs 32mm bore brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed complete all as specified and directed.

S&F in repairs 15mm bore dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs 20mm bore dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs 32mm bore dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Taking up or down 15mm bore of galvanised iron steel tubing and connections including cleaning for refixing, cutting/chasing and making good in CM 1:3 in wall/floor complete all as specified and directed.

S&F 15mm bore dia of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete in all respect as specified.

Fixing only tubes 15mm bore any grade to walls and ceiling or laying in floors

Taking up or down 20mm bore of galvanised Iron steel tubing and connections including cleaning for refixing, cutting/chasing and making good in CM 1:3 in wall/floor complete all as specified and directed.

S&F 20mm bore of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete in all respect as specified.

Fixing only tubes 20mm any grade to walls and ceiling or laying in floors

S&F in repairs 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc. complete all as specified and directed.

S&F in repairs 1.00 mm thick plain black mild steel sheeting in as in door shutter covering including, welding or soldered joint complete all as specified and directed.

S&F in repairs 200 litres capacty Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete in all respect as specified.

S&F 15mm bore dia ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directred.

S&F in repairs Vitreous China wash down water closet pan semi-pedestal pattern (Anglo-Indian Type), white (excluding fixing bolts, flushing cistern and flush pipe) including seat cover complete all as specified and directed.

S&F in repairs 10 Ltrs capacity PVC low level flushing cistern complete with syphone handle lever including connecting to WC and fixing on walls with rawl plug, screws and including PVC Connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed. complete all as specified and directed.

S&F in repair 15mm bore brass CP angular stop cock 2 way complete all as specified and directed.

S&F in repairs health faucet of ABS body with wall hook and one meter stainless tube complete all as specified and directed.

S&F in repair Jet spray CP Brass incl flexible pipe 15mm complete all as specified and directed .

S&F in repair 15mm bore dia stop valves cast copper alloys, screwed down high pressure but fancy type chromium plated (Angle valve) with crutch, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs Vitreous China wash basin, white, flat back, size 550X400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets and PVC Connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F 32mm waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in repairs 15mm dia Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe including all necessary arrangement etc, complete all as specified and directed.

S&F in repairs 15mm dia Brass CP WHB mixer for mixing hot & cold water screwed down for iron pipe including all necessary arrangement etc, complete all as specified.

S&F in repairs 15mm dia Brass CP sink mixer for mixing hot & cold water screwed down for iron pipe including all necessary arrangement etc, complete all as specified.

S&F in repair brass CP shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union fixed in repairs complete all as specified and directed.

S&F in repair 15mm bore dia stop valves cast copper alloys, screwed down high pressure but fancy type chromium plated (Concealed type) with long shank and cup, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair 15mm bore dia bib taps chromium plated fancy type cast copper alloy with crutch or butterfly handles, screwed down, screwed for iron pipe or for brass ferrule & fixed for 15mm bore GI pipe complete all as specified and directed.

M&L preparetion of old decorated plastered surfaces of walls etc by complete removal of existing treatment including washing, rubbing down and stopping of surface and applying two coats of oil emulsion distemper on wall surfaces complete all as specified and dircted.

M&L for applying wall care putty not more than 1mm thick on wall / ceiling even and smooth surface complete all as specified and directed.

M&L for preparation of old plastered surface and applying a coat of oil bound distemper, complete all as specified and directed. .

M&L preparation old plastered surfaces of ceiling and applying one coats of white wash all as specified and directed.

M&L painting one coat of synthetic enamel paints on old wooden surfaces of girth exc 10cm, including preparation of surfaces. complete all as specified and directed.

M&L preparation of old steel and iron surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L 5mm thick rendering with ready mix mortar of approved make on ceiling surface finished even and smooth without using extra cement as whole or in patch including taking down cement plaster on brick walls etc including raking out joints hacking for key scrubbing down with water etc all as directed, rubbish of the premises beyond MOD land complete all as specified and directed.

M&L for 15mm thick rendering of ready mix mortar of approved make on brick work or concrete surfaces on wall, finish the surface even and smooth without using extra cement as whole or in patch etc including taking down cement plaster on brick walls etc including raking out joints hacking for key scrubbing down with water etc all as directed, rubbish of the premises beyond MOD land complete all as specified and directed.

M&L preparation of newly plastered surfaces of ceiling and applying two coats of white wash all as specified and directed.

M&L preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper complete all as specified and directed.

M&L preparation of surfaces and applying two coats of cement base paint over a coat of primer on external surfaces of walls complete all as specified and directed.

M&L preparation of surfaces by complete removal of existing treatment & applying two coats of cement base paint on walls over a coat of primer all as specified & directed.

M&L Non skid ceramic coloured tiles 300mm x 300mm, 6 to 7mm thick (square/ rectangular), in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles, laid over and including cement screed bed 15mm thick in cement mortar (1:6) and including dismantling floor, hearth or wall tiling including cement mortor bedding (including backing) removing of rubbish off the premishes of MOD land complete all as specified and directed.

M&L Non skid ceramic coloured tiles 400mm x 400mm, 6 to 7mm thick (square/ rectangular), in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles, laid over and including cement screed bed 15mm thick in cement mortar (1:6) and including dismantling floor, hearth or wall tiling including cement mortor bedding (including backing) removing of rubbish off the premishes of MOD land complete all as specified and directed.

M&L Glazed ceramic coloured tiles of size 200mmx300mm, 6 to 7mm thick on vertical surfaces of walls such as skirting dado etc and jointed in neat cement slurry and pointed in white cement to match laid over and including 10mm thick backing coat in CM 1:4 and including dismantling floor, hearth or wall tiling including cement mortor bedding (including backing) removing of rubbish off the premishes of MOD land complete all as specified and directed.

M&L 16-18mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. and including demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar and removal of rubbish beyond MOD land complete all as specified and directed.

M&L 16-18mm Udaipur Green marble stone slab machine cut, bedded jointed and pointed with white cement mixed with pigment to match the shade of stone including cutting, rubbing and polishing surface and rounding off edges match laid over and including 20mm thick screed bed in cement mortar 1:6 and including demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar and removal of rubbish beyond MOD land complete all as specified and directed.

M&L kota stone slab 18-20 mm thick as a one piece area not exc 1.00 sqm in tread and riser of steps, skirting, dado and pillers laid over 20mm thick screed bed in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shed of the slab including rubbing and polishing and including demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar and removal of rubbish beyond MOD land complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and paving not exc. 15cm thickness (below or above ground level) and removal of rubbish beyond MOD land complete all as specified.

M&L for Hard core, broken to gauge n exc 63mm using broken stone boulders complete all as specified and directed.

M&L 75mm thick PCC (1:3:6) type C2 (using 40mm stone aggregate) as in floors/pavings /plinth protection etc, finished even and fair with using extra cement grooves filled with bitumen mastic filling of mix (1:2) (bitumen and sand) complete all as specified and directed.

M&L for 75 mm thick PCC (1:4:8) type D2 (using 40mm stone aggregate) as in sub base of floor complete all as specified and directed.

M&L for 50mm thick sand cushion/Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L 60mm thick coloured & reflective type cement concrete interlocking paver blocks hydraulically pressed of compressive strength not less than M-35 grade complete all as specified and as directed.

S&F with 4mm thick ordinary sheet glass fixed with beads fixed with metal panel pins clips complete in squares not exc 0.50 sqm each pane including hacking out old broken glass from any type of frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones, complete all as specified and directed.

S&F in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L for framed work as in door/vent/CB chowkats of angle or other section, frame work for chajja with gusset plates, cooler stand, rails, braces etc complete drilled for fixing of steel sheeting or other covering and including cutting brick work for hold fast confirming to Fe 410-W (Gde-E-250) quality 'A' including necessary welding and including wrought iron or mild steel work of any description not otherwise provided for concerete all as specified and directed.

M&L painting two coats of synthetic enamel paints over a coat of red oxide primer on new steel surfaces exc 10mm girth including preparation of surfaces complete all as specified and directed.

Demolition of reinforced cement concrete of any description and in any position including removal of beyond MOD land complete all as specified and directed.

M&L RCC cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in manhole covers slab & similar articles with plain faces set in cement mortar 1:4 complete all as specified and directed.

S&F Mild Steel TMT bars upto 10mm dia, cut to length, bent to shape required, including cranking, bending, hooking etc and binding with MS wire 0.9mm dia(annealed).

S&F in repairs 19/20 mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination in cup boards / Kitchen Cabinats complete all as specified and directed.

S&F in repair hasp and staple size 100mm safety type, aluminium anodised, including bolt to hinge plate and fixed with screws all as specified.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc including rubbish off the premises beyond MOD land complete all as specified and directed.

M&L for brick work with sub class 'B' straight or curved on plan exc 6m mean radius and built in CM 1:6 complete all as specified and directed.

All as per srl item No 74 above but except brick.

M&L for 15mm thick rendering of ready mix mortar of approved make on brick work or concrete surfaces on wall, finish the surface even and smooth without using extra cement etc complete all as specified and directed.

M&L in repair welding to steel windows, handles, door springs, iron frame of doors, rolling shutter of garrage and other miscelanious welding works not exc 10cm in length, complete all as specified and directed.

Taking down and refixing the door of any size in same opening after repairing the door complete all as specified and directed.

S&F in repair 28mm dia MS drapery curtain rod with coloured PVC coated including bracket, holder etc all necessary fittings as per site requirement complete all as specified and directed.

S&F in repairs 600mm long tubular towel rails 20mm dia, D type between flanges of brass chromium plated complete all as specified and directed.

Deduct Credit: for demolished/dismantled material of (-) Rs 65531.00 (Minus) as listed in Schedule 'A' Part II (Credit Schedule) Note: Tenderer's shall not quote against this item. The amount of Credit Schedule is tentative, however the same shall be considered to arrive at the contract sum.

Vipul Construction

M/s M M BAHL

Chandramauli Engineers Pvt. Ltd.

MRITUNJYA ASSOCIATES

B. S BUILDERS