PROVN OF 01 X STORAGE SHED (25M X 10M) AT FURNITURE YARD IN KHOJATOLI POCKET UNDER GE RANCHI.

Amount

Surface excavation n exceeding (not exceeding) 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil, complete all as specified and directed.

Excavation in trenches not exc 1.50m wide and not exc 1.50m depth for foundation etc and getting out in soft/loose soil, complete all as specified and directed.

Removing excavated materials n exc 50 mtrs and deposited where directed at a level n exc 50 mtr where directed n exc 1.50 m above the starting point, complete all as specified and directed.

Returning filling in including spreading levelling and well ramming in soft/loose soil, complete all as specified and directed.

M&L PCC 1:4:8 type D-2 (using 40mm graded stone aggregates) foundation fillings and mass concrete, complete all as specified and directed.

M&L Brick work with fly ash brick, straight or curved on plan exc 6 mtrs mean radius and built in cement mortar 1:6, complete all as specified and directed.

M&L 40mm thick DPC in cement concrete 1:2:4 type B-0 mixing with liquid water proofing admixture as per manufacturer instructiions including necessary form work (WPA shall be measured & paid seperateley)

Supply only Liquid water proofing compound

Material & labour 15mm thick rendering in CM 1:6 on fair fair faces of brick wall or concrete surfaces finished even and fair complete all as specified and directed.

M&L rendering 15 mm thick in CM 1:4 on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed

Filling of approved earth under floors, spreading, levelling in layers n exc 25cm and well raming including watering, complete all as specified and directed.

M&L Cement concrete 1:4:8 type D-2 using 40mm graded agg 75 mm thick as in sub base of floor etc complete all as specified and directed

Material & labour for 20 to 25mm thick machine cut kota stone slab flooring over and including 20 mm thick screed bed of cement mortar (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of slabs including grinding and mirror polishing complete all as specified and directed.

Material & labour for 20 to 25 mm thick machine cut kota stone slab on vertical surfaces over and including 10 mm thick backing plaster in cement mortar (1:4) complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/ridges etc, fixed with self tapping screws complete all as specified and directed.

Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F structural steel work Fe-290 (Gde -165) as in roof trusses (framed), trussesd, purlins, crane gantris, rails and fastnings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.

S&F of structural steel works for plates (plain or chequered) channel, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe 410-W (Gde-E-250) quality-A

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm but n. exc 10 cm long, dia of neck 5 to 10mm as specified and directed

S&F mild steel rag or lewis bolt, screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jaagged or lewised, length of bolt exc 30cm long and diameter of neck is 20mm

S&F Mild steel flat iron as in wind ties including cutting drilling holes and securing bolts confirming to FE 410-0 of 310-0 complete all as specified and directed.

M&L preparation of new or previously untreated steel surfaces over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel (ordinary tint) paints over a coat of red oxide priming paint complete all as specified and directed.

M&L RCC B-1 1:2:4 (using 20mm graded stone aggregate) for Foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc; basement slabs, under-reamed piles and mass concrete etc complete all as specified and directed

M&L RCC B-1 1:2:4 (using 20mm graded stone aggregate) for column, pillars, piers, post and struts etc complete all as specified and directed

Material and labour for reinforcement cement concretetype B1 1:2:4 (using 20mm graded stone aggregate) for Beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and directed

M&L RCC B-1 1:2:4 (using 20mm graded stone aggregate) for Chajjas complete all as specified and directed

Use and waste of formwork to side of concrete foundation, footing, base of column, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar works vertical or to batter etc for rough finished surfaces of concrete complete all as specified and directed.

Use and waste of formwork to side of pillars, post, struts, piers, columns and stanchions etc for rough finished surfaces of concrete complete all as specified and directed.

Use and waste of formwork to side of RCC/PCC bands in walls etc for rough finished surfaces of concrete complete all as specified and directed.

M&L TMT Bars 10mm dia and over cut to length bent to shape required inculding cranking bending spirally hooping for columns etc and binding with MS wire ennealed less than 0.9mm dia or securing with clip complete all as specified and directed.

All as per item No 30 above but 5 mm dia and over upto and including 10mm dia as in stirrups spacers and binders etc.

M&L 75mm thick PCC 1:3:6 type C-2 as in plinth protection, path etc finished the surface even & fair complete all as specified

Preparation of newly plaster surface of wall and applying three coats of white wash complete all as specified and directed.

Preparation of newly plaster surface of wall and applying two coats of cement base paint over one coat of primer complete all as specified and directed.

M&L Broken bricks hardcore of gauge 63mm deposited spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and directed.

S&F steel windows with side hung shutter including projecting type hinges with steel handle, tower bolt and steel peg stay, complete with glazing bars, dovetailed or welded.

All as per item no 36 above but without glazing bars.

Supply & fix Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staples complete all as specified and directed .

Supply & fix 3mm thick sheet glass, ordinary quality glazing with oil putty of make Shalimar Hardware or fixed with wooden beads or in steel windows in square n.exc. 0.50sqm each pane.

Supply & fix mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted forged into spikes, framed guard bars, railings and similar work complete conforming to Fe-410-0 or Fe-310-0.

S&F rolled MS framed work as in doors or gate of angle or other section with gusset plate, rail, brases etc ornamental and intricate design including either hooks and hinges or steel hanging door fitting to be prepared for hanging and also fastening conforming to Fe 410-0 or 310-o complete all as specified and directed

S&F mild steel plain black sheet 0.80 mm th. in steel gate and similar work,cut to size hole punched including round headed screw/welded with steel framing with 40mm lap joint with reveted or welded seams including bending or turning up ,mitred angles etc as required complete all as specified and directed.

M&L Sand filling under floors including watering and consolidation

M&L Machine pressed precast concrete coloured Inter locking paver block of any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment over sand cushion & laid over sub base all as specified and directed.

M&L PCC 1:3:6 type C-1 using 20 mm grade stone aggregate as in benching, coping, kerbs etc

Balaji Construction And Company

SHARDA CONSTRUCTIONS

united builders

M K Enterprises

J K CONSTRUCTION

JAYSHREE ENTERPRISES