MP1/COPPER SLAG FOUNDATION/YARD/CMSRU

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil ,backfilling the same soil or disposal of surplus excavated soil as directed.Rate is inclusive of demolishing bituminous surface/ concrete/ rubble/ solingstone etc if any.complete.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Surface dressing of the ground in all kinds of soil including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish and debris within a lead of 3km including all labour, other incidentals etc. complete.

Providing and laying plain cement concrete 1:4:8 using 40mm down graded IS nominal size hard broken metal including cost and conveyance of all materials,labour for mixing, laying, consolidating curing as per IS.456 etc.complete but excluding cost of cement and cost of formwork.

Providing Form work,Centering and shuttering including strutting, propping using shuttering sheet , supporting beams, supporting jacks,wooden planks and other incidentals etc. including removal of formwork after completion of work and clearing all materials and cost and conveyance of all materials labour etc

Providing and laying reinforced cement concrete 1:2:4 using 20mm down graded broken granite metal in ground floor upto 5m height including cost and conveyance of all materials, labour for mixing, laying, consolidating, curing,cost of dewatering etc.complete but excluding cost of cement,cost of formwork and cost of reinforcement.

Providing and laying reinforced cement concrete 1:11/2:3 using 20mm down graded broken granite metal for columns , beams and slabs including cost and conveyance of all materials, labour for mixing, laying, consolidating, curing, cost of dewatering etc.complete but excluding cost of cement, cost of formwork and cost of reinforcement. (formwork and reinforcement which will be measured separately).

Reinforcement for RCC work including cost and conveyance of all materials, labour for, uncoiling ,straightening, cutting,bending, laying & tying with 22G binding wire etc.complete but excluding cost of steel (mild steel or tor steel) but including cost of binding wire.

Brick work with common burnt clay machine moulded modular bricks of class designation 12.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand). Rate for foundation and basement

Brick work in CM 1:4 for half brick wall using class designation 7.5 for superstructure including cost and conveyance of all materials, labour, other incidentals etc complete, excluding cost of cement.Up to second floor level

Supplying and fixing 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, with approved accesories such as 100mm SS hinges 4 nos., 100mm Anodised aluminium tower bolt 1no., 150mm aluminium aldrop 1no., Chromium plated Brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever handles and necessary screws including cost of labour and all other incidentals etc. complete. .With Frame of section 90 x 45 mm

Providing and fixing in position louvre type ventilator using powder coated Aluminium frames of approved quality and shade using 63.5x38.1x2mm size or nearest available sections, louvres made with 4mm thk glass, and providing and fixing mosquito proof nets made of SS net to the ventilator frames using aluminium beading, screws, nails etc including cost and conveyance of all materials,all labour etc.complete as directed by the Engineer in charge.

Supplying and laying non-slippery/anti-skid ceramic flooring tiles of approved brand ,quality and colour set in CM 1:4 20mm thick and Jointing with grey cement slurry @ 3.3 kg/sqm for the proper binding of the tiles to line and level, pointing the joints with coloured cement to match with the tiles including cost and conveyance of all materials, labour other incidentals (size 300mm x 300mm), excluding cost of cement.(Basic rate of tile Rs.410/m2 Excl.GST )etc. complete

Supplying and laying ceramic glazed tiles of approved brand ,quality and colour for dadoing by pasting with Cement and pointing the joints with coloured cement to match with the tiles in line and level including cleaning the existing surface properly, cost and conveyance of all materials, labour other incidentals etc. quantity of cement shall be measured in relevant item. complete (Basic rate of tile Coloured Tiles Rs. 210/m2 Excl.GST)

Plastering with CM floated hard and trowelled smooth including cost and conveyance of all materials, labour, curing etc.complete as directed by the Engineer-in- charge but excluding cost of cement. 1:4, 12mm thk.(1cement : 4Fine sand)

Painting with primer of approved quality and shade after rubbing and cleaning the surface including cost and conveyance of all materials,labour, scaffolding other incidentals, curing (wherever required) etc.complete.One coat cement primer on plastered surface

Painting with ready mixed interior quality plastic emulsion paint of approved quality and colour after rubbing and cleaning the surface using wire brush, sand paper etc. wherever required including cost and conveyance of all materials, labour, scaffolding other incidentals etc. complete.One or more coats on old work

Dismantling, clearing away and carefully stacking materials useful for reuse for any thickness of wall of brick, laterite or rubble in cement mortar including disposal of debris within as per directed by EIC etc. complete.

Demolishing PCC/RCC work manually/ by mechanical means including separately removing and stacking the available reinforcement and clearing away the debris as per directed by EIC etc. complete.

Disposal of building rubbish/ brick/AAC/tiles/soil/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for all lead and lifts, complete as per directions of Engineer-in-charge.

Suppying and stacking at site OPC/PPC/PSC conforming to relevant IS.

Supplying and stacking at site TOR steel reinforcement bars of different diameters conforming to relevant IS1786 .

Supplying and fixing the following water supply fittings approved by the Engineer-in-charge, including cost and conveyance of all materials, all labour for fitting, all other incidental charges etc. complete for all levels. Brazz ball valve 15mm

Supplying and fixing the following water supply fittings approved by the Engineer-in-charge, including cost and conveyance of all materials, all labour for fitting, all other incidental charges etc. complete for all levels.PVC Float v/v with polythene floats 15 mm size

Supplying and fixing the following water supply fittings approved by the Engineer-in-charge, including cost and conveyance of all materials, all labour for fitting, all other incidental charges etc. complete for all levels.PVC Float v/v with polythene floats 15 mm CP short body tap (stainless steel)

Providing and fixing White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:

Supplying, fixing, laying and jointing the following dia PVC pipes with pasted type joints of approved quality using solvent cement including all cost and conveyance of all materials, sundries etc. complete. The rate shall be inclusive of supplying and fixing necessary specials etc. as per the direction of the Engineer-in-charge. (Pipe pieces of length below 50cm used for leak rectification works will not be measured under this item).20mm dia PVC pipe (10kg/cm2)

Supplying, fixing, laying and jointing the following dia PVC pipes with pasted type joints of approved quality using solvent cement including all cost and conveyance of all materials, sundries etc. complete. The rate shall be inclusive of supplying and fixing necessary specials etc. as per the direction of the Engineer-in-charge. (Pipe pieces of length below 50cm used for leak rectification works will not be measured under this item)63mm dia (6kg/cm2)

Supplying, fixing, laying and jointing the following dia PVC pipes with pasted type joints of approved quality using solvent cement including all cost and conveyance of all materials, sundries etc. complete. The rate shall be inclusive of supplying and fixing necessary specials etc. as per the direction of the Engineer-in-charge. (Pipe pieces of length below 50cm used for leak rectification works will not be measured under this item).110mm dia (4kg/cm2)

Supplying and fixing ISI marked / best quality approved brand 110 mm PVC specials at all heights including cost and conveyance, all labour and all other incidentals etc. Tees, door tees, bends etc.

Supplying and fixing ISI marked / best quality approved brand 110 mm PVC specials at all heights including cost and conveyance, all labour and all other incidentals etc. Adapters, reducers, offsets, vent cowl etc.

Supplying & fixing HDPE (sintex or equivalent) water tank connecting using necessary fittings such as connectors, adapters, and testing of pipe lines etc. including cost and conveyance of all materials, labour, other incidentals etc. complete.

Supply and Installation of 2000Ltr Biodigester septic tank madeup of 8mm thick FRP(Fibre reinforce plastic) flat bottom shaped with 4"inlet Connection with the existing toilet and necessary outlet connection to the near by Sewage line with all Connections,fittings, filling the tank with innoculam, including cost and conveyance of all materials, labour, clearing the site after work, other incidentals etc. complete.

Fabrication & erection of Structural steel work, using Tees, angles, channels, plates,Tubes & Pipes etc. at all heights, fixed with or without connecting plate, including cutting, bending/straightening, welding/ bolting, fabrication, erecting in position, aligning the erected structure, cost of all accessories, hire for tools and plants and applying a priming coat with zinc chromate primer after mechanical buffing, etc complete. all as directed by the Engineer-in-charge.(all miscellaneous items made of steel shall be measured in the same item) complete.Using Steel procured by the contractor

M/s Roy Infra and Developers