REPAIR/ MAINT OF CERTAIN E/M FITTINGS/ FIXTURES AND INTERNAL WIRINGS AS WELL AS SUBMAIN WIRING, LT PANEL AT CERTAIN BLDGS OF MD OFFRS ACCN AT SP MARG, ABH MESS AND TPT UNIT ASC UNDER GE NEW DELHI

Amount

Taking down copper/aluminium point wiring ( fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, Light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc. complete all as specified and as directed.

M&L for point wiring with PVC FRLS insulated unsheathed multi stranded copper conductor of size 1.5 Sqmm 1100 V grade including one run of PVC insulated unsheathed multi stranded copper conductor of size 1.5 sqmm as earth continuity conductor connected to common earth dolly, in existing conduits and its accessories, including replacement of factory made steel boxes suitable for modular switch/sockets including modular plates of suitable size as per site requirement complete all as specified and as directed for the following items as mentioned in item no. 2.01 to 2.05:- Note:Cutting & chasing if required shall be measured/paid under relevant items. Make:-Polycab/Havells/RR

One light/ceiling fan/exhaust fan point controlled by one no. one way switch 5 amps.

One light point controlled by one nos, two way switch.

One bell / buzzer point controlled by one bell push

One 3 pin 5 Amps socket outlet point controlled by one way switch on independent board.

One 3 pin 5 Amps socket outlet point controlled by one way switch on same board.

All as per item No 2.00 above but for point wiring with 2.5 Sqmm single core copper cable and earth continuity wire with 2.5 Sqmm single core cable for one three pin 15 socket outlet point on independent board complete all as specified and as directed.

All as per item No 2.00 above but for point wiring with 4 Sqmm single core copper cable and earth continuity wire with 4Sqmm single core cable on independent circuit complete all as specified and as directed.

M&L for point wiring with PVC FRLS insulated unsheathed multi stranded copper conductor of size 1.5 Sqmm 1100 V grade including one run of PVC insulated unsheathed multi stranded copper conductor of size 1.5 sqmm as earth continuity conductor connected to common earth dolly, in and including PVC conduit of suitable sizes of medium grade ISI marked for surface wiring and its accessories, including MS sunken box and hylem sheet of suitable size, ISI marked for housing the switches and sockets, for the following items as mentioned in item no. 5.01 to 5.04 :- Make:-Polycab/Havells/RR :-

One light/fan/exhaust fan point controlled by one nos, one way switch.

One three pin 5 Amp socket outlet point controlled by one no, one way switch on independent board

One bell / buzzer point controlled by one bell push

One three pin 5 Amp socket outlet point controlled by one no, one way switch on same board

All as per item No. 5.00 here in before but with 2.5 sqmm (for phase, neutral) and 2.5 sqmm (for continuous earth wire) cable for one 15/16 amp socket out let point on independent board complete all as specified and as directed.

M&L for point wiring with PVC insulated unsheathed multi stranded copper conductor of size 1.5 Sqmm 1100 V grade including one run of PVC insulated unsheathed multi stranded copper conductor of size 1.5 sqmm as earth continuity conductor connected to common earth dolly, in and including PVC casing caping medium grade ISI marked and its accessories, provn of new gang box for fixing of one 5A one way switch , ISI marked for housing the switches, complete all as specified and as directed for the following items as mentioned in item no. 7.01:- Make:-RR/Havells/Polycab.

One light/fan/exhaust fan point controlled by one nos, one way switch.

S&F in replacement lamp holder, PVC /polycarbonate type with cord grip cap suitable for pendant fittings complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed conduit wiring, etc., and making good, cutting not exc. 10 cm girth on brick walls complete all as specified and as directed.

Taking down submain wiring including taking out conduit pipe of any description and of any size complete all as specified and as directed.

S&F submain wiring alongwith earth wire with 2 run of 4 Sqmm (Main Cable and neutral) and one run of 4 Sqmm as earth wire of FRLS PVC insulated copper conductor, single core cable drawn through and including rigid PVC conduit of 20 mm dia bore with all fittings accessories complete all as specified and as directed. Make:-Polycab/Havells/RR

S&F submain wiring alongwith earth wire with 2 run of 6 Sqmm (Main Cable and neutral) and one run of 6 Sqmm as earth wire of FRLS PVC insulated copper conductor, single core cable drawn through and including rigid PVC conduit of 20 mm bore with all fittings accessories complete all as specified and as directed. Make:-Polycab/Havells/RR

S&F submain wiring alongwith earth wire with 2 run of 10 Sqmm (Main Cable and neutral) and one run of 10 Sqmm as earth wire of FRLS PVC insulated copper conductor, single core cable drawn through and including rigid PVC conduit of 20 mm bore with all fittings accessories all as directed.Make:-Polycab/Havells/RR

S&F of Modular switch 6 amps 250 V AC one way with ISI mark including 6 amps switch frame complete all as specified and as directed. Make:-Indoasian/Havells/Legrand

S&F of Modular switch 6 amps 250 V AC two way with ISI mark including 6 amps switch frame complete all as specified and as directed. Make:-Indoasian/Havells/Legrand

S&F of modular switch Socket combined 6 A , 3pin flush type universal 240 volts complete all as specified and as directed. Make:-Indoasian/Havells/Legrand

S&F of modular switch socket combined 16 A SP 5 pin one way 240 volts complete all as specified and as directed. Make:-Indoasian/Havells/Legrand

S&F of modular switch 16 A SP one way 240 volts complete all as specified and as directed. Make:-Indoasian/Havells/Legrand

S&F modular socket 6 A Multi socket for 2/ 3 pin 240 volts complete all as specified and as directed. Make:-Indoasian/Havells/Legrand

S&F of modular socket outlet 16 A-2/3 pin combined 240 volts complete all as specified and as directed. Make:-Indoasian/Havells/Legrand

S&F bell push ,flush type 5 A 240 volts complete all as specified and as directed. Make:-Indoasian/Havells/Legrand

S&F modular bell push 6A with Neon 1 module 240 volts complete all as specified and as directed. Make:-Indoasian/Havells/Legrand

S&F electronic fan regulator modular type 100Watt step type Double Modular as per existing complete all as specified and as directed. Make:-Indoasian/Havells/Legrand

S&F in replacement switch piano flush button single pole one way 6 amps complete all as specified and as directed. Make:-Indoasian/Havells/Legrand

S&F in replacement switch piano flush type 15 amps single pole one way complete all as specified and as directed. Make:-Indoasian/ANCHOR/Havells

S&F in replacement of socket outlet 5/6 amps 2 in 1, 3 pin flush type complete all as specified and as directed. Make:-Indoasian/ANCHOR/Havells

S&F in replacement socket outlet 2 in 1, 3 pin 5 and 15 amp, flush type complete all as specified and as directed. Make:-Indoasian/ANCHOR/Havells

S&F in repair STEP type electronic fan regulator flush type 230 volts complete all as specified and as directed. Make:-Indoasian/ANCHOR/Havells

S&F in repair electric bell Ding-Dong AC 230 Volt complete all as specified and as directed. Make:-Indoasian/ANCHOR/Havells

S&F ceiling rose, 3 phase/ PVC/ polycarbonate isolated body complete all as specified and as directed.

Taking down DB of SPN 4/8/12 way type removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls etc. complete all as specified and as directed.

S&F sheet metal enclosures for DB's when MCB to be used, SPN double door 240 volt, 12 way with 200 amps rated bus bar complete all as specified and as directed. MAKE:-Legrand/Havells/HPL

S&F sheet metal enclosures for DB's when MCB to be used, SPN double door 240 volt, 8 way with 200 amps rated bus bar complete all as specified and as directed. MAKE:-Legrand/Havells/HPL

S&F sheet metal enclosures for DB's when MCB to be used, SPN double door 240 volt, 4 way with 200 amps rated bus bar complete all as specified and as directed. MAKE:-Legrand/Havells/HPL

Taking down MCB, any type, removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls etc.

S&F of MCB TPN 40 to 63 Amps, 415 V complete all as specified and as directed. MAKE:-Legrand/Havells,Indoasian-

S&F of MCB SPN 40 to 63 Amp 240 volt 10 KA complete all as specified and as directed. MAKE:-Legrand/Havells/HPL

S&F of MCB SPN 6 to 32 Amp 240 volt 10 KA complete all as specified and as directed. MAKE:-Legrand/Havells/HPL

S&F MCB SP 40 Amp to 63 Amp 10 KA.240 volts complete all as specified and as directed. MAKE:-Legrand/Havells/HPL

S&F MCB SP 6 Amp to 32 Amp 10 KA.240 volts complete all as specified and as directed. MAKE:-Legrand/Havells/HPL

Taking down Metal clad enclosure with plug and socket 10/20 Amps removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls etc. complete all as specified and as directed.

S&F sheet Metal enclosure with plug and socket 10 Amp 240 volts with one MCB single pole, complete all as specified and as directed. Make Legrand/Havells/HPL

S&F sheet Metal enclosure with plug and socket 20 Amp 240 volts with one MCB single pole. all as specified.Make:Legrand/Havells/HPL

S&F in replacement LED batten of 18 Watt 230Volt(size 4 ft) , box type complete with LED Tube Light 18 Watt & all accessories internally prewired including connecting up with three core sheathed flexible copper conductor cable of suitable complete all as specified and as directed. Make:- product Code LCTL-18-CDL of crompton or equivalent in Havells/Phillips

S&F in replacement LED Tube Light of 20 Watt 230Volt(size 4 ft) , box type complete with LED Tube Light 20 Watt & all accessories internally prewired including connecting up with three core sheathed flexible copper conductor cable of suitable size complete all as specified and as directed. Make:- product Code CAT NO-HLB-33-20-CW-IP of HALONIX or equivalent in Havells/Phillips.

S&F in replacement of Endura Linear LED batten of 9 W (2 ft.),extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver in AC complete all as specified and as directed. Make: CG make cat part No. LCTL-9-CDL or equivalent in Havells/Phillips

S&F in replacement aesthetically designed circular shaped Recess & surface /PENDANT MOUNTING designer LED light of 24 W fixture with PMMA diffuser to give glare free light complete all as specified and as directed. Make:HALONIX CAT NO-HLDLR-31-12-CW or Equivalent of Phillips

Supply & fix in replacement aesthetically designed Wall mounted decorative wall LED light of 8 W fixture with opal diffuser to give glare free light including suitable LED lamp of 8 W having Lamp base E27 complete all as specified and as directed. Make:CG cat No-37934/06 or Equivalent of Phillips/Havells

Supply & fix in replacement aesthetically designed Wall mounted decorative mirror LED light of 3.6 W fixture with opal diffuser to give glare free light including suitable LED lamp of 3.6 W having Lamp base E27 complete all as specified and as directed. Make:Philips cat No-34034/14/86 or Equivalent of CG/Havells

Supply & fix in replacement aesthetically designed recessed/surface mounted decorative downlighter LED light of 8 W fixture with opal diffuser to give glare free light including suitable LED lamp of 8 W complete all as specified and as directed. MAKE:HALONIX CAT NO:-HLDLS-R06-08-CW /HLDLR-R06-08-CW or Equivalent of CG/Havells

Supply & fix in replacement aesthetically designed recessed/surface mounted decorative downlighter LED light of 12 W fixture with opal diffuser to give glare free light including suitable LED lamp of 12 W complete all as specified and as directed. MAKE:HALONIX CAT NO:-HLDLS-R06-12-CW/HLDLR-R06-12-CW or Equivalent of CG/Havells

Supply & fix in replacement aesthetically designed recessed/surface mounted decorative downlighter LED light of 15 W fixture with opal diffuser to give glare free light including suitable LED lamp of 15 W complete all as specified and as directed. MAKE:HALONIX CAT NO:-HLDLS-R06-15-CW/HLDLR-R06-15-CW or Equivalent of CG/Havells

Supply & fix in replacement aesthetically designed recessed mounted decorative downlighter LED light of 18 W fixture with opal diffuser to give glare free light including suitable LED lamp of 18 W complete all as specified and as directed. MAKE:HALONIX CAT NO:-HLDLR-R06-18-CW or Equivalent of CG/Havells

Supply & fix in replacement 2x2 Panel light surface mounted LED light of 36 W fixture with opal diffuser to give glare free light including suitable LED light of 36 W complete all as specified and as directed. Make:CG cat no-LCTLSN-36-CDL or Equivalent of philips/Havells

Supply and fix in replacement circular recessed ceiling secure led light ,ultra sleek recessed downlight for low height false ceiling in round profile 16 W warm white including suitable LED light of 16W complete all as specified and as directed. MAKE:PHILIPS CAT NO:-SM251C LED 16 S-6500 PSU WH or Equivalent of philips/havells

Supply & fix in replacement 1x4 Panel light surface mounted LED light of 36 W fixture with opal diffuser to give glare free light including suitable LED light of 36 W complete all as specified and as directed. Make:CG cat no-LCTLSN-36-CDL or Equivalent of philips/Havells

S&F in replacement of Building security light fitting 25 watt outside the building including GI bracket of suitable size, fixing with clamp complete all as specified and as directed. Meke:-CG Cat No-LSTS-25-CDL or equivalent in Havells/Philips.

S&F in replacement of cast aluminium housing, powder coated LED bulkheads light fitting 10watts with frosted diffuser complete with suitable driver complete all as specified and as directed. Make:CG Cat Part No LBHE-10-CDL, Halonix cat-HLBH-02-10-CW, Bajaj Cat Part No B1BWP10LED

S&F in replacement of factory made load line DB's double door made out of CRCA mild steel sheet with insulating materials like polyester epoxy coated surface mounting 4 way TPN 415 Volts, IP 43 with suitable busbar, neutral link & earth link suitable for MCCB TP as incomer & MCB SP/TP as out going complete all as specified and as directed. MAKE-INDOASIAN CAT PART NO-811888 or equivalent in Havells/legrand

S&F in replacement of factory made load line DB's double door made out of CRCA mild steel sheet with insulating materials like polyester epoxy coated surface mounting 8 way TPN 415 Volts, IP 43 with suitable busbar, neutral link & earth link suitable for MCCB TP as incomer & MCB SP/TP as out going complete all as specified and as directed. MAKE-INDOASIAN CAT PART NO-811890 or equivalent in Havells/legrand

Supply and fix in replacement Metal clad plug top of capacity 20 Amp, 240 volts complete all as specified and as directed. Make : Legrand/ Indoasian/Havells/ HPL

Supply and fix in replacement Metal clad socket of capacity 20 Amp, 240 volts complete all as specified and as directed. Make : Legrand/ Havells/ HPL/Indoasian

Supply and fix only decorative laminated sheet 3mm thick of size 8'' X 12'' including necessary cutting of sheet for fixing switch / socket complete all as specified and as directed.

Supply and fix in replacement decorative laminated sheet 3mm thick of size 8'' X 5'' including necessary cutting of sheet for fixing switch / socket complete all as specified and as directed.

Supply and fix in replacement decorative laminated sheet 3mm thick of size 7'' X 4'' including necessary cutting of sheet for fixing switch / socket complete all as specified and as directed.

Supply and fix in replacement decorative laminated T cover sheet 3mm thick of size 2/3 inch dia complete all as specified and as directed.

Supply and fix in replacement fan capacitor of the following capacity complete all as specified and as directed. :- (Make : Epcos/ Anchor)

Supply and fix in replacement non metallic rigid PVC conduit medium grade 20 mm dia, ISI Mark complete all as specified and as directed. Make : Kalinga premium/ supreme/ finolex

Supply and fix in repair only non metallic rigid PVC casing caping, ISI Mark complete all as specified and as directed. Make : Kalinga premium/ supreme/ finolex

Taking down of ceiling fan/ exhaust fan dismantling of blades, transportation to work shop and carrying out for rewinding, transportation to site, reinstallation and testing complete all as specified and as directed.

M&L for Rewinding of ceiling fan 1200 mm sweep by dismantling of fan motor cutting and removing of burnt windings, cleaning, winding with super enameled copper wire of superior quality, same gauge of wire, same Nos of turns, provn of insulation paper applying of varnish drying of varnish and assembling of fan including replacement gun metal bush, ball bearing wherever required complete all as specified and as directed.

All as per ser item No 71.00 but exhaust fan 230/300 mm sweep

All as per ser item No 71.00 but exhaust fan 400 mm sweep

All as per ser item No 71.00 but exhaust fan 600 mm sweep

S&F ceiling fan Ball bearing of suitable size & model (as per sample), complete all as specified and as directed. Make:- NBC/ SKF

M&L for replacing U' clamps with rubber reel, bolts, nuts, washers and safety pin of ceiling fan of any size/ and as per existing make complete all as specified and as directed.

M&L in repair for Down rod of 1' height fabricated out of MS pipe 12mm dia heavy duty duly painted with one coat of white paint complete all as specified and as directed.

S&F in repair Canopy of Ceiling fans of 1200/1400mm swipe size heavy duty duly painted with one coat of white paint complete all as specified and as directed.

M&L for spray painting (white colour) with synthetic enamel paint to Ceiling fans/Exhaust fan of any capacity to reach upto satisfied finish of painting after cleaning and preparation of surface and marking MES No with black paint complete all as specified and as directed.

Supply & fixing flat ceiling fan blade of aluminium, 1mm thickness suitable for 1200mm sweep ceiling fan,12-15 deg tilted, having 3 Nos in each set complete all as specified and as directed.

Supply & fixing flat exhaust fan blade of aluminium, 1mm thickness suitable for 230/250/300mm sweep exhaust fan,12-15 deg tilted, having each set complete all as specified and as directed.

S&F of metallic Frame of 230/250/300 mm exhaust fan including taking down of old frame complete all as specified and as directed.

Supply & fixing in repair flat ventilation fan blade of PVC , 1mm thickness suitable for 230/250/300mm sweep exhaust fan,12-15 deg tilted, having each set complete all as specified and as directed.

S&F ventilation fan motor of size 230/250/300 including taking down of old ventilation fan motor complete all as specified and directed.

S&F of Frame of 230/250/300 mm ventilation fan including taking down of old frame complete all as specified & directed.

Taking down carefully Geysers 25/50 Ltr capacity, opening for inspection, , cleaning, descaling, reassembling and refixing in position after carrying out repairs like soldering/ brazing etc including replacement of pressed rubber gasket, Nuts, bolts, neon indicator lamp 1 Amp etc. complete all as specified and as directed.

M&L for spray painting (white colour) with synthetic enamel paint to Geysers 25/50 Liters capacity to reach upto satisfied finish of painting after cleaning and preparation of surface and marking MES No with black paint complete all as specified and as directed.

M&L in repair heating element of 2.0 KW (Circular) as required at site including rubber washers (ISI marked) etc complete all as specified and directed (As per sample).

M&L in repair heating element of 2.0 KW (triangular) as required at site including rubber washers (ISI marked) etc complete all as specified and directed Make Venus or As per sample.

S&F in repair storage tank made out of copper sheet of appropriate thickness and confirming to IS 208 (1974) for 50 litre capacity geysers with collar complete duly tested at required pressure as per IT I of 1986 of steel storage tank complete all as specified and as directed.

S&F in repair storage tank made out of copper sheet of appropriate thickness and confirming to IS 208 (1974) for 25 litre capacity geysers with collar complete duly tested at required pressure as per IT I of 1986 of steel storage tank complete all as specified and as directed.

M&L for replacement of insulating material (Glass wool) for 25/ 50 litre capacity Geysers complete all as specified and as directed.

S&F in repair base plate assembly 20 SWG heavy duty suitable for 50 litre capacity copper tank geyser with inlet, outlet and thermostat pipe with drain plug and screw for fixing the element including clamps for holding the element with nuts, bolts and safety valves suitable for all type of geysers installed at site (As per sample) complete all as specified and as directed.

S&F in repair base plate assembly 20 SWG heavy duty suitable for 25 litre capacity copper tank geyser with inlet, outlet and thermostat pipe with drain plug and screw for fixing the element including clamps for holding the element with nuts, bolts and safety valves suitable for all type of geysers installed at site (As per sample) complete all as specified and as directed.

M&L in repair chromium plated copper connection pipe 600mm long with two brass adopters washers and connecting up complete all as specified and directed.

M&L in reapir PVC connection pipe 450mm long with two brass adopters washers and connecting up complete ISI marked complete all as specified and as directed.

M&L in repair safety nut for high pressure release (As per sample) complete all as specified and as directed.

S&F in repair non return valves 15mm dia and connecting up complete all as specified and as directed. (ISI marked) as per sample complete all as specified and as directed.

M&L in repair top cover for geysers of 25/50 ltrs capacity any make as required at site duly painted with two coats of Synthetic enamel spray paint (first quality) complete all as specified and as directed.

S&F in repair bottom cover for geysers of 25/50 ltr any make required at site duly painted with synthetic enamel spray paint (first quality) with inspection plate in two pieces complete all as specified and as directed.

S&F in repair outer cover for geyser made out of MS sheet suitable for 50 ltrs capacity geyser vertical/horizontal type complete all as specified and as directed.

S&F in repair outer cover for geyser made out of MS sheet suitable for 25 ltrs capacity geyser vertical/horizontal type complete all as specified and as directed.

S&F in repair thermostat (ISI Marked) for 25/50 Liters capacity Geyser complete all as specified and as directed. Make : Daspass/Theeta/TTE

S&F in repair indicator lamp (Red & Green) 230 volts suitable for Geyser (as per sample) complete all as specified and as directed.

Supply and fix only mild steel hole fastener 10mm dia, 100mm long including nut and washer complete all as specified and as directed.

Supply and Fix only gun metal gate valve 15 mm bore, ISI marked with iron wheel head, screwed both ends for GI pipe complete all as specified and as directed. Make : Upadhyay/ Leader/ Zoloto

Taking down MCCBs type removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls/panel etc. complete all as specified and as directed.

Supply and fixing MCCB, 3 pole, 415 volt of capacity 40/63 Amp, breaking capacity not less than 25 KA , Icu=100% Ics thermal magnetic type adjustable type 80 to 100 % confirming to IEC-60947-II, IS-13947-II , including thimbles, nuts, bolts ,washers etc and connections, replacement of thimbles, minor parts like nuts bolts washer etc. complete all as specified and as directed. Make : Legrand/Havells/Indoasian cat part No 4200 43

Supply and fixing MCCB, 4 pole, 415 volt of capacity 125A breaking capacity not less than 25KA, Icu=100% Ics thermal magnetic type adjustable type 80 to 100 % confirming to IEC-60947-II, IS-13947-II , including thimbles, nuts, bolts ,washers etc and connections, replacement of thimbles, minor parts like nuts bolts washer etc. complete all as specified and as directed. Make : Legrand/Schnieder/L&T cat part No 4200 56

Supply and fixing MCCB, 4 pole, 415 volt of capacity 250 Amp, breaking capacity not less than 36 KA , Icu=100% Ics thermal magnetic type adjustable type 80 to 100 % confirming to IEC-60947-II, IS-13947-II , including thimbles, nuts, bolts ,washers etc and connections, replacement of thimbles, minor parts like nuts bolts washer etc. complete all as specified and as directed. Make : Legrand/Schnieder/L&T cat part No 4202 49

S&F in repair indicator light 3 Nos in each set having three colours Red, Blue, Yellow complete all as specified and as directed.

M&L in repair for earthing complete with galvanized mild steel plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (in earth pit not less than 2.25 meter deep below ground level) with the top edge of earth plate at a depth not less than 1.5 meter below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and including GI strip 32x6 mm bolted (with GI nuts, bolts & check nuts) and riveted to earth (Plate) electrode at one end and connected to main switch board test point at the other and watering GI pipe (medium grade) 20 mm bore from bottom of earth pit to top of electrode and 40 mm GI pipe light grade for earth strip protection complete with earth pit in PCC 1:2:4 type B0 using 12 mm graded crushed stone aggregate, RCC cover etc. including excavation complete all as specified and as directed.

M&L in replacement earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/ pipe or fixed to poles or any other indicated situation for loop earthing etc as required 32X6 mm galvanised iron strip complete all as specified and as directed.

Disconnecting, dismantling the existing LT panel Meter board of size 1500mmX1800mmX350mm,415 Volt, 3 phase, 4 wire with bus bar 400 amp capacity from existing foundation after taking proper shut down and restoration of electric supply to quarters by necessary arrangements as directed and keeping safe custody for refixing back including connecting up all connections, new foundation, connecting up all dismantled connection and ensure proper electric supply distribution to users DB after carry out the following repair works in panel and necessary PCC work of grade 1:2:4 in meter room to make sure all panels fitted properly and all soil is cover by PCC work complete all as specified and as directed.

Complete painting with two coats of enamel paint of approved colour with writing/marking of connection details including Qtr no., danger sign board, working voltage etc

Provisioning of additional Din rail for MCB SPN including MCB SPN 63 amps 10 KA,230 V. 'C' curve of 1 Nos.

Cutting the rusted out portion of the LT panel board and Welding with new sheets of thickness 2 mm including necessary fabrication at site and neccessary painting etc.

Replacement of view glass for meter compartment.

Reconnecting the submains to the MCBs and MCCBs terminal with the help of copper lugs and thimbles and tightening properly in such a way that no leakage current found during site inspection

Disconnecting, dismantling the existing LT panel Meter board for LIFT of size 600mmX1400mmX300mm with angle frame 50mmX50mmX6mm ,415 Volt,3 phase,4 wire with bus bar 400 amp capacity from existing foundation after taking proper shut down and restoration of electric supply to quarters by necessary arrangements as directed and keeping safe custody for refixing back including connecting up all connections, new foundation, connecting up all dismantled connection and ensure proper electric supply distribution to users DB after carry out the following repair works in panel and necceassary PCC work of grade 1:2:4 in meter room to make sure all panels fitted properly and all soil is cover by PCC work as directed by Engineer-in-charge. (a) Complete painting with two coats of synthetic enamel paint of approved colour with writing/make logo of connection details including Bldg no., danger sign board etc. (b) Welding of rusted out sheets with new sheets of thickness 2 mm. (c) Replacement of view glass for meter compartment.

M/S ANIL KUMAR

RUCHIKA ENGG.WORKS

S.R. Constructions

Surjit and Sons

RUHI ASSOCIATES

ramveer Singh