Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
| 2 | Admitted-Fee/PreQual/Technical/Finance 01 SOURA NEAR J K BANK NOWSHERA SRINAGAR JAMMU AND KASHMIR 190011 | SRINAGAR | JAMMU AND KASHMIR | 190011 | Admitted-Fee/PreQual/Technical/Finance |
| 3 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
| 4 | Admitted-Fee/PreQual/Technical/Finance | Admitted-Fee/PreQual/Technical/Finance |
Tender Value
₹35.4 L
EMD Value
₹70,800
Closing Date
19 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Wildlife Warden Central Division Srinagar
Office of the Wildlife Warden Central Division Srinagar, New Theed Harwan, Dachigam, Srinagar, Kashmir, Jammu and Kashmir PIN-191123
Construction of Prefabricated staff quarter at Sarbal Sonmarg including stone filling of plinth/ soakage pits/ Septic tank/ flooring/ DPC and wooden flooring
2023_FD_202394_1
E-NIT No. 36 OF 2022-23 Dated 11/01/2023
Open Tender
Civil Works
Item Rate
35 days
Sarbal Sonmarg
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,000
Government Treasury under Account Head 0406-Forest
₹70,800
20 Jan 2023
13 Jan 2023
20 Jan 2023
13 Jan 2023
19 Jan 2023
13 Jan 2023
Amount
Earthwork in bulk excavation by mech. means (hydraulic excavations) over areas exceeding 30 cm in depth 1.5mtr in width including disposal of excavated soil. All kinds of soil
Providing and Laying stone soling in excavated trenches duly hand packed on level including carriage up to site of work
Providing and Laying in position cement concrete of specified grade including curing in
1:4:8 (1cement :4sand: 8stone)(agg 40 mm size)
1:3:6 (1cement :3sand : 6stone agg 20mm)
Supply & filling of GSB (Granular Subbase) in layers not exceeding 22cm in thickness and the aggregate size does not exceed 90mm including carriage upto site of work complete
Providing & laying DPC 50mm thick with cement concrete 1:2:4 1cement:2sand:4stone agg 20mm nominal size) and curing complete
Cement concrete flooring in 1:2:4 (1 cement:2 sand:4 stone agg 20mm) finished with a floating coat of neat cement including cement slurry (50mm thick)
Brick work with common burnt clay bricks of class designation in foundation and plinth including curing in 1:6mix(1cement:6sand)
Dry random rubble masonary with hard stones in foundation and plinth with band stones(nallah) including carriage upto site of work
Reinforced cement concrete work in beams suspended floor upto floor v level including curing in 1:1.5:3 (1cement:1.5sand:3stone agg 20mm size)
Mild steel reinforcement in position including necessary cutting, bending and placing in position including cost of binding wire
12mm thick cement plaster in 1:4mix (1cement:4sand)
Centering , shuttering, strutting and propping etc and removal of form work in foundation footings
In Suspended floor, soffits etc
Providing and laying of 100mm PVC pipes with all fittings complete
Construction of brick masonary mainholes in cement mortor 1:4mix with R.C.C slab(top) in 1:1.5:3 (stone agg. 20mm) with foundation concrete in 1:4:8 inside plastering 12mm thick in 1:3mix (1cement :3sand) finished with a floating coat of neat cement complete with dia insidesiz 90x80cm and 45cm deep incld C.I cover complete
Wooden flooring
Carriage of different material by mechanical transport
Sand and bajri for an average lead = 30Km's
Cement for avg lead = 10Kms
Carriage of bricks for an average lead =50Km
Civil Part (A)
Technical specification: Details of structural members. The steel structure will be designed for the designed parameters for the dimensions as indicated above, all structural steel will be ISI marked with manufacture's test certificate for raw material and strctural properties.
a) Columns. The main columns will be made out of RH steel sections of size 122x61x3.60mm conforming to IS 4923: 1997 MS base plate of size 250x250x8mm and top plate of size 200x150x8mm will be welded to the columns, base plates will be pre-drilled with 4No's 18mm dia holes base plates will be provided with 4Nos 16mm dia 450mm long holding down bolts each, while top plates will be providd with 4Nos 16mm dia normal bolts
b) Kitchen: The kitchen will be provided with 20mm thick black granite counter over 19mm thick water proof ply board incl. Pull out drawer's under neath of 19mm water proof ply board frame work incl. providing and fixing of stainless steel sink waste pipe with sink mixer of approved quality etc with G.I and PVC fittings including its complete disposal system
c) Bathroom: The bathroom will be fixed with glazed ceramic floor tiles and glazed ceramic wall tiles upto 5'-6" in height, an European type W.C 50 litres geyser, 03No. C.P bib cock, 04No. C.P wall mixer, 03 No. C.P wash basin mixer, angle valves, one No. wash basin, one No. C.P soap case, one glass shelf, mirror, towel rod and other allied accessories of approved quality incl. G.I and PVC fittings of required dia and length incl. one water storage tank (1000litres) and its fittings of approved quality to be fitted on roof top (all the ceramic C.P.G I fittings shall be of approved quality) incl. its complete disposal system
d) Electrification: The Electrification comprising of 10No. Heating points, 15 no. Lighting points, 04 no. Fan points incl. Required multi stranded wire, switches, sockets , holder pair of MCB of required capacity including main board with necessary item fixtuers required for electrification complete (all the itmes shall be ISI standard)
e) Truss: The Principal rafter and the bottom chord will be fabricated out of RH steel sections of size 96x48x4mm of required slope. All other strut members will be fabricated out of RH steel sections of size 66x33x2.90mm
f) Purlins: The purlins will be fabricated out of RH steel sections of size of 96x48x4mm with 6mm thick cleats welded at both the ends
g) The roof will be provided with 0.63mm thick green colour coated steel corrigated sheets. Sheet covering will be fixed with using hot dip zinc coated self drilling hexagonal wahser head fasteners. Ridges shall be covered by 0.63mm thick colour coated steel sheet. the sheets shall be laid with minimum end and side lap of 150mm
h) Gable End: Gable end will be covered with same panels as of wall upto bottom chord of truss. The triangular truss portion will be covered with 0.53mm wider than the width of the opening
i) Roof projection: the roof will have minimum projections 450mm all around purlins. Purlins will also be extended in the roof at the eaves and gable roof extension (outside the structure) The eaves boarding and soffit shall be of 0.63mm thick colour coated steel sheetss.
Wall panels:
a) The main and paritition walls will be made up of 60mm thick wall panels of make Lioyd panel system/Modern panels will be made of 0.63mm thick hot dipped galvanized steel sheets on both sides with 60mm thick layers of rigid CFC free close cell polyurethane foam (density 40Kg+2Kg/cum) insulation. The wall panels will be provided with tongue and groove joint and will be with cam lock system for interlocking. all materials required for the manufacture of shelter will be new and shall comply with relevant Bureau of Indian standard specificatins. Base channel of size 30x65x1.25mm thick will be provided for walls
b) The PUF insulation material in the panel will have fire retarding and self extinguishing properties as per any international standard B2 DIN 4102 part-I/BS-4735 Self Ext.
c) GI metal Skin PUF panels
g) Thickness of skin 0.63mm thick hot dipped galvanized steel sheets on inner and outer side with 50-micron thick PVC guard film on the finished surface only for protection agaisnt scratches during handling and transportation . Base metal of GI skin CRCA as per IS-513. Galvanized as per 120, SI-277.
i) The panels will be insulated with PUF foam (Density 40Kg + 2KG/Cum)
ii) These panels are to be manufactured using high pressure dispensing machine of required capacity to inject specified amount of PUF chemical into the cavity of full panel in one shot not exceeding 25sec. Duration. This is to ensure that the liquid PUF mixture is sprayed into the cavity before the foaming reaction starts so that the insulation core of the panel is formed in one piece and provides desired structural and physical properties. The bulk density of insulation sould be 40Kg/cum and the impending machinery should be equipped wit a PLC controlled panel for monitoring and controlling te injection rate to assure specified uniform density requirements.
d) The pre coated GI sheet should have minimum coating of 4-5 micron epoxy primer and 25micron polyester top coat on the finished surface and 7-8 micron primer alkyd backer on backside, which is bounded to the polyurethane foam. The pre coated GI sheet should conform to IS 14246-1995 with manufacture test certificates conforming above specifications
vii)Close cell content = 90-95%
viii) Temperature range = (180oC to 110oC)
ix) Thermal conductivity at 10oC = (0.018K-cal/M-HR Degree C)
(Design value 0.020Kcal/M-hr C or 0.023 W/m-K)
x) Fire resistant = (horizontal Extent of burn BS 4735) < 125mm)
xi) Self extinguishing ASTMD 1692 = Passes (Fire retarded foam chemical) not easily ignitable as per B.S: 476 PT 5 class - I as per BS: 476 Pt
xii) Water absorption = 0.20% volume at 100% RH
xiii) Water vapour permeability = 0.08- 0.12gms/hr/m2
e) The PUF insulated core of these composite panel will have the following properties:
i) Density = 40+2Kg per cum
ii) Compressive strength at 10% deformation = 2-10Kg/cm2
iii) Tensile strength = 3.7Kg/Cm2
iv) Donding strength = 4.0Kg/Cm2
v) Adhesion strength = 2.90Kg/Cm2
vi)Dimensional stability (48hrs)
ab) + 38 C & 90% RH = 0.10%
f) The ISO-cyanide and polyol liqui components used for in situ process of polyurethane foam for panels should be accompanied with correlating manufacture test certificate indicating batch nos, date of manufacture and expiry dates
g) All panels will be moulded in place using the above in situ prices after placing them in a hydraulic press with heated aluminium pattern and corner moulding so as to attain the desire finish bounding and structural properties . All panels will be manufacture in a single piece as per approved panel layout drawings using the above materials and manufacturing process.
h)The consignee can carry out inspection of any panel from the lot at manufacture premises to ensure the above chemical and physical properties.
i)The colour of panels shall be appliance white colour on bot internal and external face. False ceiling. The false ceiling of rooms, toilets will be made up of 40mm thcik PUF insulated panels of make Llyod panel system/modern panels/jindal Mectechno/PSL Engineering of equivalent. the panels will be made of 0.63mm thick hot dipped galvanized steel sheets on both side with 40mm thick layer of rigid CFC free close cell polyurethane foam (Density 40Kg+ 2Kg/cum) insulation. The false ceiling panles will be provided with tongue and groove or lip locking joint for interlocking . False ceiling will be supported with the help of inverted CRC Tee section 50x50x5mm thick and L section of 50x50x5mm thick fixed appropriately to the truss.
Openings
a) Windows Aluminium profile windows with all fitments will be provided of required size & section. The window frame and window shutter will be manufactured using suitable Aluminium sections. The window shutter will be of three leaves of which two shall be proved with glazing of 6mm clear grade LTED 62RS 1.3 polycarbonate sheet make CE structured product and one leaf will be provided with fixed by proofing using stainless steel mesh of 1.5mm aperture.
b) Doors: Door frames and shutters will be made up of suitable Aluminium profile sections. Main shutter will be provided with flush both sides teak ply inserts of appropriate thickness and fly proof shutter provided on outside of the door using stainless steel mesh of average 1.50mm aperture. The main door shall be provided with built in locking system of make Godrej/ Harrison. Two no,s Aluminium tower bolts of 200mm size from inside ad one sliding bolt 300mm long and one bow handle 150mm size to be provided on both in and outside of each shutter. Fly proof shutters will be provided with hydrualic door closers.
a) Various Fasteners and fittings: Fastener and fittings of mild steel shall be supplied unless otherwise specified in and shall be fixed where required fastening means will be provided for the items to be fitted at the time of erection 10% spare nuts, bolts and washers will be provided. The fasteners supplied shall conform to relevant BIS specification.
Finishers : All steel work will be given two coats of red oxide zinc chromate primer and all exposed timber parts will be given two coats of wood primer by the manufacturer in the factory. Eight liters of red oxide zinc chromate primer and twenty litres white colour paint with appropriate colour strainer per shelter will be provided in sealed containers for retouching and painting after erection. All paint material will be of Jonson and Nicholsonn Berger/Asian make
Technical specification for pre-fab shutter: Pre-fabricated structure made up of steel structure and PUF panels in walls and technical specification given below. The main and partition walls will be made up of 60mm thick PUF insulated panels. The false ceiling will be provided with PUF insulated panels as spaced below. Roof covering will be provided with 0.63mm thick colour coated Hi-rib sheets
Design parameters
i) Seismic Zone v
ii) Snow load 1mt standing on roof
iii) Wind speed 55m/s (as per IS - 875)
iv) Temperature range = (40oC to 50oC)
Internal Dimensions
i) Room: 2x12'-0"x16'-0"= 384sft
ii) B/R: 2x5'-0"x6'-0"= 60sft
iii) Lobby: 1x23'-0"x10'-0"= 230sft internal height 10`-0"
iv) Kitchen: 1x10'-0"x+9'-0"= 90sft
v) Veranda: 1x10'-0"x5'-0"=50ft
vi) Store: 1x5'-3"x10'-9"= 56.43sft
Total plinth area = 1x37'-0"x25'-0"
M/S SAMEER MAJID BHAT
M/S BURLINGTON STEEL INDUSTRIES
M/S ABID AHMAD NAQASHBANDI
stage.html
html • 0.02 MB
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .