CONSTRUCTION OF ANGANAVADI NO-02 AT GHATTIGANUR VILLAGE IN HUNGUND TALUK OF BAGALAKOTE DIST

CONSTRUCTION OF ANGANAVADI NO-02 AT GHATTIGANUR VILLAGE IN HUNGUND TALUK OF BAGALAKOTE DIST

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/ trap/basalt crushed graded coarse aggregates and fne aggregates as per relevant IS...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fne sand) including rounding off corners wherever required smooth rendering, providing and removin...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) fnished with a top layer 6 mm thick cement plaster with cement mort...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Providing and laying Polished Glazed Vitrified tiles with thickness 10

mm in floor with different sizes with water absorption less than 0.08%

and conforming to IS:15622, of approved brand & manufactur...

Providing flooring with 25mm thick polished Cuddapah slabs using cement

mortar 1:6, 25mm thick over existing cement concrete bed or top of roof

laid to line and level and jointed with cement slurry mi...

Providing and laying Polished Granite stone flooring in required design

and patterns, in linear as well as curvilinear portions of the building all

complete as per the architectural drawings with 18 m...

Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed ti...

Providing and fixing M.S. grills of required pattern in frames of windows

etc. with M.S. flats, square or round bars etc. including priming coat with

approved steel primer all complete. Fixed to openi...

PProviding & fixing of 2-track x 2-panel sliding windows made out of multi

chambered UPVC(Matching to RAL-9016) sections and with minimum

TiO2(Titanium Dioxide) at 6 PHR with TPE (Thermo Plastic Elast...

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...

Providing and fixing stainless steel ( Grade 304) railing made of Hollow

tubes, channels, plates etc., including welding, grinding, buffing, polishing

and making curvature (wherever required) and fitt...

Providing Sal wood wrought and putup for purlins, common rafters and similar work including cost of materials, labour, usage charges complete as per specifications(PWDSR 2023-24 Vol-2 P.No.99 I.No.12....

Fixing of door frame in an existing opening including embedding frame in

floor and walls after cutting masonry for holdfasts for embedding holdfast

in cement concrete 1:3:6 of 20mm and down size grani...

Providing and fixing in position fully panelled Honne wood shutters for

doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm

wide top rail and stiles 100mm wide as per drawing a...

Providing & fixing factory made PVC Door frame of size 50x47mm with

a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam

sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...

Providing & fixing 30mm thick factory made rigid foam Panelled Door

Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for

stiles and 15x15mm for top & bottom rails, covered with heat mo...

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...

Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 ltr/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an eve...

Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give...

Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matt...

Providing and placing on terrace(at floor levels) polyethylene water storage tank, IS:12701 marked, with over and suitable locking arrangement and making necessary holes for inlet, outlet and overflow...

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually co...

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the wa...

Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak p...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

providing and fixing on wall surface 2.5kg/sq cm HDPE rain down water pipes 110mm outer dia approved make and brand with neccessary specials like shoes bends and offsets fixed with iron clamps

Providing and fixing brass stop cock of approved quality :(PWDSR 2023-24 Vol-2 P.No.115.I.No.13.3.2)

Providing and fixing gun metal non- return valve of approved quality (screwed end) :(PWDSR 2023-24 Vol-2 P.No.115.I.No.13.6.2.1)25mm nominal bore

Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, screws at an interval of 300mm …. etc. as required. 25mm

Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPERconductor flexible multistrand FRLS PVC insul...

Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box

Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293 GROUP A6 Amps one way Switch

Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293 GROUP A.6Amps 3 way Socket

Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293 GROUP A.Stepped fan Regulator

Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293 GROUP A32 Amps Dp switch

Supplying & Fixing of 70-150 W lamp holder 2 Pin

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 16Amps

Supplying and fixing of Shunt trip suitable for MCCB.CBCT.

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross3 with Short circuit breaking cap...

Supplying and fixing of 5'-80 W of T8 Fluorescent Tube with

54W power consumption with low 3mg Mercury content less

phosphor coating Operating voltage range from 180V to 265V,

50Hz AC power Supply.

Supplying of Ceiling Fan with Capacitor rating As per guideline of

BEE 5 star rating and IS:374/19 and also comply with IS: 1709/1984

with latest amendment, Rated voltage 220 V/50 Hz, Rated power upto...

SFixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076”...

Wiring for lighting/power circuit using one of FRLS PVC

insulated 1100V grade, multistrand copper wire with low

conductor resistance single core in open or concealed system ofwiring with specified IS-...

Supplying and fixing 32Amps security and energy saving DP switch with key tag suitable to operate on 230 Volts, 50Hz AC supply & completely wired on existing box

LT AC Single Phase 2 Wire, 5-30 Amps Smart Energy

Meter, Class 1.0 Accuracy with RF Communication