Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.5 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹30.2 L+₹1.5 L (5.20%)Rejected-Finance 21 JHAMRI 151 JHAMRI JHAMRI ROHTAK HARYANA 124142 UDYAM HR 07 0030314 | JHAJJAR | HARYANA | 124142 | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹31.4 L+₹2.7 L (9.36%)Rejected-Finance | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹32.7 L+₹4.1 L (14.1%)Rejected-Finance OLD HASIMARA PO HASIMARA DISTT ALIIPURDUAR WB PIN 735215 | HASIMARA | ALIPURDUAR | WEST BENGAL | 735215 | L4 | Rejected-Finance Other than L1 | |
| 5 | L5₹35.6 L+₹7.0 L (24.3%)Rejected-Finance NEAR DON BOSCO SCHOOL MORE NA ATALIKA APARTMENT SEVOKE ROAD SILIGURI PIN 734001 WB | SILIGURI | DARJEELING | WEST BENGAL | 734001 | L5 | Rejected-Finance Other than L1 |
Tender Value
₹43.2 L
EMD Value
₹86,400
Closing Date
28 Jun 2024, 6:00 pmClosed
CWE (AF) BAGDOGRA
Commander Works Engineers (AF) Bagdogra Bagdogra Airport (WB) Pin- 734 421 Tele 0353 - 2698308
ADDN/ALTN OF HT/UG CABLE CONNECTING MAFI PS2 TO HVDB (NGHAS HANGAR) ALONG WITH ALLIED WORKS AT AF STN HASIMARA.
2024_MES_656787_1
8576/HAS/2024-25/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
Hasimara
MES Contractor enlisted as Class D category b(ii) having deposited Standing Security of Rs 1,00,000.00 with dept. Contractors not enlisted in MES should meet the MES enlistment criteria corresponding to appropriate class and category.
10 documents required · 10 mandatory
₹500
GE (AF) HASIMARA
₹86,400
Yes
22 Oct 2024
30 May 2024
5 Jul 2024
30 May 2024
28 Jun 2024
14 Jun 2024
Amount
Note 1:- (Applicable for all parts/items) : The biidders/contractors are advised to read tender documents & all corrigendum/amendments and general condition of contracts before entry/quoting the rates. Note 2:- Attention to bidder is hereby invited to upload revised BOQ if published during their bid submission. Uploading of incorrect/ pre-revised BOQ shall be treated as non bonafide and rejected. Fixed credit has been given in technical documents which shall be taken into account during acceptance of bid/tender.
Supply, laying, jointing and commissioning of cable XLPE insulated circular aluminium conductor, conductor screen with extruded semi conducting compound, insulation screening with extruded semi conducting compound in combination with copper tape (0.3KA for 1 sec) cores laid up, innersheath of PVC tape, galvanised steel flat strip armoured and overall PVC sheathed cable conforming to IS 7098/ Part II 1985, ,11000 volts (E), grade cross sectional area 95 sq. mm 3 core including insertion of cable carefully into existing runway /PTT duct complete all as specified and directed.
Excavation in trenches not exceeding 1.5 metre wide and not exc 1.5 metre in depth for foundation of pole / stay, or cable trenches and getting out in soft/loose soil complete all as specified and as directed by the Engineer in charge.
Returning filling in incl spreading, leveling watering and well ramming in layers not exceeding 25 cm in soft loose soil complete all as specified and as directed by the Engineer in charge.
Removing excavated materials to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point all as specified and as directed by the engineer –in- charge.
M&L clean and dry sand (unwashed) in trenches around the cable for cushioning complete all as specified & directed. Note :- Sand cushioning 8cm before laying the cable and 15cm after laying the cable & punned down 18cm,and punned thickness shall be measured and paid.
Supplying and laying un-reinforced precast concrete cable cover, class HVP,type 1 with peak, size 300mm x 180mm x 40mm with marking top of the cover "ELECTRIC" complete all as specified and directed.
Laying only precast concrete cable cover size 300mm x 180mm x 40mm or as per obtained from existing cable complete all as specified and directed.
M & L for power cable route marker pre-cast RCC of size 1500mm x 300mm x 50 mm with top curved portion, 8 mm dia round bar reinforcement, emboshing of letter (MES-POWER- CABLE) both faces of pre-cast during casting of RCC pre-cast, applying two coats of external emulsion paint with primer approved colour and painting of emboshed surface with black colour including earth work for fixing of route marker complete all as specified and as directed.
S & F cable jointing kit for 11 KV (Earthed) grade cable for indoor end termination cold shrink type joint complete with jointing material and accessories suitable for 3 Core XLPE armoured aluminium conductor cable of size 95 Sqmm complete all as specified and directed.
Supply and fixing HT Bus Bar factory made CPRI approved made out of 3.15mm thick MS sheet on angle iron framing 50X50X6 mm MS with cannopy on top spread out 15 cm from top, HT resin cast moulded bushing fitted on 12 mm glass fibre inside top plate suitable for 11KV with 3 Nos copper bus bar 400 amp current capacity separeted with fire returdent seperator mounted on HT Insulator 06, duly powder coated painted externaly and internaly and danger marking of 11000 volt complete of size 1.5X1.5X1.0 metre including all cable jointing nuts bolts made of brass/ HS steel of sutable size and PCC for grouting of Joint Box to be fixed 02 feet height from ground lebel all as directed by the engineer –in- charge. NOte: HT Indoor Joint cable jointing KIt shall be measured and sepearely.
M & L for earthing complete with galvanised steel earth plate 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanised steel strip of size 32 x 6 mmas earthing lead upto equipment/ pole/panel by means of bolts, nuts, check nut and washers of galvanised iron or steel as shown in electrical plate No-3 of SSR Part I, incl excavation and earth work in any type of soil, GI pipe 40 mm dia light grade as protection pipe, charcoal filling, common salt ,PCC 1:3:6 type CI using 20 mm graded stone aggregate as in chamber, MS angle iron frame 40x40x6mm and RCC precast cover 40mm thick (1:2:4) type B-1 using 20mm dia graded stone aggregate reinforced with 8mm dia TMT bars @ 75 mm c/c both ways with MS handle 12mm dia, CI funnel and wire mesh, 20mm dia GI pipe medium grade for watering, connected to earth test point incl testing complete all as specified and directed. Note : GI Strip of size 32 x 6 mm from earthing to HT Panel box alongwith protection GI Pipe 40 mm dia shall be included in the quoted rates.
M & L for taking down existing damaged HT UG cable 11000 volts (E), grade cross sectional area 95 sq. mm to 120 sqmm 3 core including insertion of cable carefully into existing runway /PTT duct complete all as specified and directed.carefully from trenches and keeping the HT UG Cable and cable cover properly in safe custody for relaying complete all as specified and directed by Engr-in-Charge. Note : Earth work will be measured and paid seperately in the respecitive items of schedule.
Re-laying/Re-routing of serviceable HT UG Cable carefully 11000 volts (E), grade cross sectional area 95 sq. mm to 120 sqmm 3 core including insertion of cable carefully into existing runway /PTT duct complete all as specified and directed. Note for item No 12 & 13 :- Earth work and re-laying of cable cover will be measured and paid seperately in the respective item of schedule.
M/S. KUMAR CONSTRUCTION CO. (BID ID -3036103)
M/S P K AGARWALA (BID ID -3035422)
M/S BIJAY KUMAR SHIVA (BID ID -3036081)
M/S AHUJA TRADING (BID ID -3036107)
CONSTRUCTION SHELTER (BID ID -3042816)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .