BALANCE WORK OF INCOMPLETE RESIDENTIAL UNITS AND DEVELOPMENT OF ASSOCIATED INFRASTRUCTURE AT PANWASA, UJJAIN

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 meter including removal and disposal of top organic soil not exceeding 150 mm in thickness if required and as per relevant clauses of section-200. In area of light jungle

Excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location with all lifts and lead upto 1000m as per relevent clauses of section-300 of specification.

Construction of Embankment/Sub grade/ earth shoulders, as per clause 305 & its sub-clauses, Where required but with approved materials/soil like morrum CBR value not less then 7% i/c all lead & lifts i/c excavation, cost of watering, compaction by vibratory roller/ heavy pneumatic type roller and maintenance of surface during construction to ensure shedding & preventing ponding of water (clause 305.3.6) shaping & dressing (clause 305.3.7), finishing etc. complete but excluding scarifying existing granular/bituminous road surface vide clause 305.6.

Construction of granular sub-base by providing Coarse graded material (CBR>30), spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method at OMC and compacting with vibratory roller of 80-100 KN Static weight to achieve the desired density, complete in all respect as per relevant clauses of section-400.

Construction of Dry lean cement concrete Sub-base over a prepared subgrade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 26.5mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per MORTH Specifications Table 600-1, cement content not to be less than 150 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with paver with electronic sensor/mechanical paver, compacting with 8-10 tonnes vibratory roller, finishing and curing and as per relevant clauses of section- 601.

Construction of dowel jointed, plain cement concrete pavement in M-30 grade concrete over a prepared sub base with 43 or higher grade cement, coarse and fine aggregate conforming to IS:383 maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver with spreading the concrete by shovels, rakes compacted using needle, screed and plate vibrator and finished in a continuous operation including provision of contraction, expansion, and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, placing of dowel bar,tie rod admixtures as approved, curing compound, finishing to lines and grades as per approved drawings as per IRC-15 2011 and as per relevant clauses of section-602 of specifications complete excluding cost of steel in dowel ber & tie rod etc.

Construction of cement concrete mountable/ barrier type kerb / kerb with channel in M 20 grade laid with kerb laying machine, all complete as per design approved by Engineer-in-Charge..

Transportation of metal for a lead upto 2.0 Km. Lime, moorum, building, rubbish,Fly Ash

Providing and laying factory made Coloured Chamfered Edge Cement Concrete Paver Blocks of required strength, thickness and size/shape, made by table vibratory method using PU mould, laid in required colour and pattern over 50mm thick compacted bed of stone dust, compacting and proper embedding/laying of inter locking paver blocks into the bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand including locking edges with M 15 Cement Concrete in in footpath, light traffic parking etc. complete as per direction of Engineer-in-Charge. 80mm thick C.C. paver block of M-35 grade with approved colour, design and pattern.

Earth work in excavation for foundation,trenches for pipes/cables or drains etc.by mechanical means/ manual means(exceeding 30 cm indepth.)including ramming of bottom,dressing of sides,disposal of excavated earth including of all lift and lead upto 50m.Disposed earth to be levelled and neatly dressed. All kinds of soil

Filling by available excavated earth (excluding rock) in trenches,plinth,sides of foundations etc.in layers not exceeding 20 cm in depth,consolidating each deposited layer by ramming and watering,lead upto 50 m and lift upto 1.5 m.

Providing, laying, Jointing & field testing of High Density Polyethylene pipes, (HDPE) confirming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector or jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jacks/Hydraulic Jacks/ But fusion machine. (50mm & above fusion jointed & below 50mm mechanical jointed) PE-100 8 Kg/sq.cm 110 mm dia

Providing & fixing of Cast iron double flanged sluice valves as per I.S.:14846-2000 fitted with cast iron cap including jointing & testing with cost of jointing material such as bolts, nuts, rubber insertions etc. all complete PN-1 100mm dia

Providing & fixing cast iron single air valves, small orifice with screwed end as per IS : 14845-2000 including jointing & testing with cost of jointing material and rubber insertion all complete PN-1 40mm dia

Providing and laying Bend 90 confirming to IS specifications.8 Kg/sq.cm 110 mm dia

Providing and laying in position all socketed cast iron crosses (all sizes in millimeter).Medium Class 100 mm

Providing laying and jointing of galvanised Iron Pipes with specials (such as bends, elbows, tees etc) class light, medium & heavy including testing of joints, cost of pipes, specials and jointing materials all complete. Medium 50mm dia

Providing and laying at or near ground level Pre-cast kerb stone of M-25 grade in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement:3 coarse sand) thickness of joints except at sharp curve shall not to more than 5 mm) including making drainage opening wherever required completeas per direction of Engineer-in-Charge.

Chamber 110 x 50 x 77.5cm with 500x450 mm horizontal and 450x100 mm vertical gratings both.

R.C.C. Ground Service Reservoirs & Sumps Cost of 75,000 Litres Capacity

Earth work in excavation for foundation,trenches for pipes/cables or drains etc.by mechanical means/ manual means(exceeding 30 cm indepth.)including ramming of bottom,dressing of sides,disposal of excavated earth including of all lift and lead upto 50m.Disposed earth to be levelled and neatly dressed.All kinds of soil 250 mm, 300 mm

Filling by available excavated earth (excluding rock) in trenches,plinth,sides of foundations etc.in layers not exceeding 20 cm in depth,consolidating each deposited layer by ramming and watering,lead upto 50 m and lift upto 1.5 m.

Providing, Laying & Jointing of DWC (double wall corrugated) PE Pipes of renowned duly tested inclusive of all cost of inspection charges, transpotation charges, transit insuranse, loading/ unloading and stacking at site/ store etc, complete. 250 mm / 295 mm

Providing, Laying & Jointing of DWC (double wall corrugated) PE Pipes of renowned duly tested inclusive of all cost of inspection charges, transpotation charges, transit insuranse, loading/ unloading and stacking at site/ store etc, complete 300 mm / 345 mm

Construction of circular type manhole 900 mm internal dia. at bottom, 560 mm dia at top, depth of manhole 900 mm,common Burnt Clay Bricks or fly ash bricks of compressivestrength not less than 75 Kgf/ cm2 with 1:4 cement mortar (1cement : 4 coarse sand), inside & outside plastering minimum12 mm thick with cement mortar 1:3 (1 cement:3 coarse sand) finished with a floating coat of neat cement. 20 cm thick foundation in cement concrete 1:3:6 (Nominal Mix) with stone aggregate 40mm nominal size, and making channel in cement concrete 1:2:4 (Nominal Mix) with stone aggregate 20mm nominal size including finishing the channel to shape, including providing and fixing footrest, manhole cover and frame etc. complete. (only excavation as per actual shall be paid separately) fixing of heavy duty (HD-20) SFRC cover and frame as per IS 12592 fixed in Cement concrete 1:2:4 (nominal mix) with stone aggregate 20mm nominal size including centering and shuttering etc. complete as per standard drawing. Depth of manhole shall be considered as the vertical distance from top of the manhole cover to the outgoing invert of main drain channel. (as per Drawing No. - 13-A)

Earth work in excavation for foundation,trenches for pipes/cables or drains etc.by mechanical means/ manual means(exceeding 30 cm indepth.)including ramming of bottom,dressing of sides,disposal of excavated earth including of all lift and lead upto 50m.Disposed earth to be levelled and neatly dressed.All kinds of soil

Filling by available excavated earth (excluding rock) in trenches,plinth,sides of foundations etc.in layers not exceeding 20 cm in depth,consolidating each deposited layer by ramming and watering,lead upto 50 m and lift upto 1.5 m.

Filling with moorum for pipe bedding or over the pipe including supply of moorum/sand

Providing and Laying non-pressure (NP3) RCC socket & spigot pipes with rubber gasket joint including testing of joints. 450 mm dia

Construction of circular type manhole 900 mm internal dia. at bottom, 560 mm dia at top, depth of manhole 900 mm, common Burnt Clay Bricks or fly ash bricks of compressive strength not less than 75 Kgf/ cm2 with 1:4 cement mortar (1cement : 4 coarse sand), inside & outside plastering minimum12 mm thick with cement mortar 1:3 (1 cement:3 coarse sand) finished with a floating coat of neat cement. 20 cm thick foundation in cement concrete 1:3:6 (Nominal Mix) with stone aggregate 40mm nominal size, and making channel in cement concrete 1:2:4 (Nominal Mix) with stone aggregate 20mm nominal size including finishing the channel to shape, including providing and fixing footrest, manhole cover and frame etc. complete. (only excavation as per actual shall be paid separately) fixing of heavy duty (HD-20) SFRC cover and frame as per IS 12592 fixed in Cement concrete 1:2:4 (nominal mix) with stone aggregate 20mm nominal size including centering and shuttering etc. complete as per standard drawing. Depth of manhole shall be considered as the vertical distance from top of the manhole cover to the outgoing invert of main drain channel. (as per Drawing No. - 13-A)

Earth work in excavation for foundation, trenches for pipes / cables or drains etc. by mechanical means /manual means (exceeding 30cm in depth.) including ramming of bottom, dressing of sides, disposal of excavated earth including of all lift and lead upto 50m. Disposed earth to be levelled and neatly dressed. All kinds of soil

Filling by available excavated earth (excluding Filling by available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.Total excavation Deduct PCC Deduct RCC

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level.Raft( PCC)

Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site on work in transit mixer for all leads, having continous aggitated mixer, manufactuer as per mix design of specified grade for reinforced cement work, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement. including Admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding upto floor level including cost of binding wire, wastage and over laps upto 12mm horizontal/ inclined position of reinforcement bars in slab and beams, plinth, chajjas, lintels, upto 4.5m vertical length of reinforcement in wall columns (over laps shall be provided as per requirement of IS : 13920; IS 456 & SP : 34) etc. complete.Thermo-Mechanically Treated bars. (Fe 500 D or more) @135 kg/cu.m. of RCC

Centering and shuttering including strutting, propping stretching etc. complete for and removal of form work by sheet plate or ply wood shuttering for :Foundations, footings, bases of columns, etc. For mass concrete.

Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc

Suspended floors, roofs, landings, balconies and access platform

12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement: 4 sand)

20mm cement plaster 1:3( 1 cement : coarse sand) finished with coat of neat cement

Extra for providing and mixing water proofing material as per IS Standard in cement concrete work. Qty as prescribed by the manufacturer.In cement mortar 1:4 internal plaster

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :300 mm dia. R.C.C. pipe

Providing & fixing of precast reinforced cement concrete manhole cover and frame including cost of transporting at site and all material etc. complete600 mm dia. heavy duty

Providing MS/CI foot rests and fixing in manhole with CC blocks of Cement concrete grade 1:2:4 (Nominal Mix) with stone aggregate 20 mm nominal size of size 30cm x 20cm x15cm With 20mm round bar foot rest

Constructing Brick masonry rectangular manhole in cement mortar 1:4 (1cement:4 fine sand) common Burnt Clay Brick or fly ash bricks, of compressive strength not less than 75 Kgf/cm2 RCC top slab Cement Concrete 1:2:4 (Nominal Mix) with stone aggregate 20mm nominal size, 20 cm thick foundation in cement concrete 1:3:6 (Nominal Mix) with stone aggregate 40mm nominal size, inside & outside plastering minimum 12 mm thick with cement mortar 1:3 (1 cement:3 coarse sand) finished with a floating coat of neat cement and making channels in Cement Concrete 1:2:4 (Nominal Mix) with stone aggregate 20mm nominal size including finishing the channel to shape, including providing and fixing footrest, manhole cover and frame etc. complete. (only excavation as per actual shall be paid separately), Depth of manhole shall be considered as the vertical distance from top of the manhole cover to the outgoing invert of main drain channel. (for reference purpose use Drawing No. 11)

Providing and laying below ground unplasticised PVC pipe to with stand working pressure of 4 kg/cm2 soild waste pipes confirming to IS:13592 and IS:4985 including jointing with seal ring confirming to IS :5282 leaving 10mm gap for thermal expansion all necessary fittings etc. complete. Excavation to be paid seperataly.110 mm diameter OD

Making soak pit 2.5 m diameter 3.0 meter deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 40 and S.W. drain pip 100 mm diameter, 1.8 m long complete. Over the filling shall be placed single matting which shall be covered with minimum layer of 7.5 cm earth. The shaft be covered with 7.5 cm thick stone or R.C.C. slab 10 cm wide and 10 cm deep brick edging with bricks of class designation 40 shall be provided round the pit. The connection of the open surface drain to the soak pit shall be made by means of 100 mm diameter S.W. pipe with open joints, as per standard design. (Fig 2.25).

Supplying of ISI Marked and approved make of Moulded Case Circuit Breaker (MCCB) suitable for 3 phase,3 pole, 50 Hz, 415 Volts, AC supply with respective interrupting capacity (KA) at 415 Volts cited against their range standard conforming to IS - 8828 MCCB with Breaking Capacity 25 KA at 415 V Current Rating -25 to100 Amps & 70% -100% adjustable

Supplying of ISI Marked and approved make of Moulded Case Circuit Breaker (MCCB) suitable for 3 phase,3 pole, 50 Hz, 415 Volts, AC supply with respective interrupting capacity (KA) at 415 Volts cited against their range standard conforming to IS - 8828 MCCB with Breaking Capacity 25 KA at 415 V Current Rating -125 Amps & 70% -100% adjustable

MCCB with Breaking Capacity 35 KA at 415 V Current Rating -400 Amps & Adjustable: 70% -100% thermal & 4-10 times magnetic setting

Supplying of ISI Marked and accepted standard of Miniature Circuit Breaker (MCB) of 'C' series suitable for 240/415 Volts, 50 Cycle , 10 kA Value AC supply confirming to IS : 8828 : 1996, IEC : 60898:2002 but without enclosures :-SINGLE POLE (SP) 6 Amp to 32 Amp Rating

DOUBLE POLE (DP) 6 Amp to 32 Amp Rating

DOUBLE POLE (DP) For 40 Amps. Rating only.

FOR TRIPLE POLE & NEUTRAL(TPN) 6 Amp to 32 Amp Rating

FOR TRIPLE POLE & NEUTRAL(TPN) For 40 Amps. Rating only.

FOR TRIPLE POLE & NEUTRAL(TPN) 50 Amp to 63 Amp Rating

FOUR POLE(FP) 6 Amp to 32 Amp Rating

FOUR POLE(FP) For 40 Amps. Rating only.

FOUR POLE(FP) 50 Amp to 63 Amp Rating

Supplying and fixing of multi core round HRFR / FR PVC insulated copper (flexible) conductor & PVC sheathed cables 1100 Volts as per IS:694-1990 of approved make.(23/.0076) Three core

Aluminium bus bar strips with PVC sleeves

LED lamps

Earthing with G.I. Earth plate 600mm X 600mm X6mm thick including accessories and providing masonary encloser in cement mortor, cover plate having locking arrangment on the top and G.I. watering pipe 20mm dia 2.7 Meter long etc. (but without charcoal or coke and salt ) complete as required.

Add Extra for using salt and charcoal / coke for G.I. Plate or Copper plate earth electrode as required including excavation & refilling.

Supplying and laying 8 SWG copper wire at 0.5 Meter below ground level as conductor earth electrode including soldering etc. as required.

Supplying and laying 6 SWG G.I. wire at 0.5 Meter below ground level as conductor earth electrode including soldering etc. as required.

Supplying and laying 25mm X 5mm G.I. strip at 0.5 Meter below ground level as strip earth electrode including soldering etc. as required.

Supplying and laying 25mm X 6mm G.I. strip at 0.5 meter below ground level as strip earth electrode including soldering etc. as required.

Providing and fixing 25mm X 4mm G.I. strip on surface or in recessed/concealed for connection etc. as required.

Supply of support for overhead line RS joist / H-beam of I.S. standard including welding, drilling of required hole etc. complete as required. H-Beam 152x152mm , Std weight 37.1 kg per meter

Supply of steel tubular pole swaged type as per IS:2713-1980 Complete with baseplate and top Canopy 410 SP-8 - 7.50 meter

Supply of steel tubular pole swaged type as per IS:2713-1980 Complete with baseplate and top Canopy 410 SP-29 - 9.00 meter

Supplying and drawing All Aluminium Alloy conductor (AAAC) of approved make confirming to IS 398-1979 Pt. IV, including binding at existing insulator, jointing, jumpering, tearing off, connecting etc. as required including clearing of obstacles (if any) 0.075 sq.inch / 48 sq.mm Alloy Aluminium Conductor

Supplying and drawing of stranded Aluminium Conductor Steel Reinforced (ACSR) confirming to IS:398-1976 of approved make, stringing, making off complete with binding at existing insulator, jointing, jumpering, tearing off, connecting etc. as required and clearing of obstacles (if any) etc. ACSR 6/1 - 4.09mm dia (Raccoon) with equivalent copper area 48 Sqmm (0.075 sq inch) equivalent calculated Aluminium area 77.83 Sq.mm.

Supplying and erection of water tight terminal box of 14 SWG M.S. Sheet 4mm thick box of required size to erect the suitable kit kat/ MCB/Switch with Top & bottom folded fitted with rubber ring to make it water tight with pole clamp made from 40x3mm M.S. flat iron with 2 Nos. Nut and Bolts duly painted with 2 coat of Red Oxide paint and 2 coat of Aluminium silver paint erected with cable gland but excluding the cost of the Kit Kat/MCB/Switch complete as per specification: 20x15x15Cms.

Supplying and erection of water tight terminal box of 14 SWG M.S. Sheet 4mm thick box of required size to erect the suitable kit kat/ MCB/Switch with Top & bottom folded fitted with rubber ring to make it water tight with pole clamp made from 40x3mm M.S. flat iron with 2 Nos. Nut and Bolts duly painted with 2 coat of Red Oxide paint and 2 coat of Aluminium silver paint erected with cable gland but excluding the cost of the Kit Kat/MCB/Switch complete as per specification: 30x20x15 Cms

Erection of steel tubular or steel rail pole or H-Beam of length exceeding 8 meters but not exceeding 10 meters in cement concrete 1:3:6 (1 cement : 3 coarse sand: 6 graded stone aggregate 40mm nominal size) foundation, base padding & muffing including exacavation and refilling etc. as required.(4.55 bags of cement/cmt.)

Erection of steel tubular or steel rail pole or H-Beam of length exceeding 10 meters but not exceeding 13 meters in cement concrete 1:3:6 (1 cement :3 coarse sand: 6 graded stone aggregate 40mm nominal size) foundation , base padding & muffing including excavation and refilling etc. as required.(4.55 bags of cement/cmt.)

Supplying and erection of bow stay set complete (galvanized) with 19mm dia x 1.8m long stay rod, anchor plate of size 300mmx300mm x 6.4mm thimble stay clamps, turn buckle 19mmx60cm, 7/4.00mm dia G.I. stay wire and strain insulator etc. in cement concrete 1:3:6 ( 1 Cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) foundation including excavation and refilling and also with 0.6m long brace of size 50mmx 50mmx6mm angle iron with 50mm dia pulley fixed at one end of the brace as required.

Supplying and fixing of 20mm dia. G.I. pipe A class 2 mtrs. Long for street light water tight bracket including bending to shape and wiring with 1.5sqmm W.P./PVC wire alongwith water proof controlling switch etc. as required.

Supplying and erection of galvanised stay set for 11kV overhead line complete with 19/20mm dia x 1.8 meters long stay rod, anchor plate of size 45cm x 45cm x 7.5mm thick, thimble, stay clamps, turn buckle (20mmx 600mm), 7/4.00mm dia G.I. stay wire and 11kV strain insulator etc. in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm. nominal size) foundation including excavation and refilling etc. as required.

Supplying and erection of 11kV pin insulator complete with large steel head G.I. pin, nut, washer etc. as required.

Supplying and erection of 11kV disc insulator for 11kV overhead lines with galvanised insulator fittings, ball and socket type, and complete with galvanised strain clamp, bolts, nuts washer etc. as required.

Painting of pole bracket cable protecting pipe and its clamps in two coatings of All. enamel based primer as directed by Engineer-in-Charge.Upto 5 mtr.

Supply of XLPE Insulated power cable (conforming IS-7098) 1100 Volt grade/Heavy duty power cable conforming to IS 1554-1100 Volts grade , 2 core /3½ core/4 coreISI MARKED with Alu. Stranded /solid conductor.ARMOURED 3½ CORE 70 Sq.mm(XLPE)

Supply of XLPE insulated power cable (conforming IS-7098 Part-I) 1100 Volt grade, 1 core/2 core/3½ core/4 core ISI marked with alu. stranded /solid conductor Unarmoured 1 core 70 sq. mm.

Supply of XLPE insulated power cable (conforming IS-7098 Part-I) 1100 Volt grade, 1 core/2 core/3½ core/4 core ISI marked with alu. stranded /solid conductor Unarmoured 1 core 150 sq. mm.

Supply of XLPE insulated power cable (conforming IS-7098 Part-I) 1100 Volt grade, 1 core/2 core/3½ core/4 core ISI marked with alu. stranded /solid conductor Unarmoured 1 core 300 Sq. Mm.

Unarmoured 2 core 2.5 sq. mm.

CABLE LAYING Laying of one number PVC insulated and PVC sheathed power cable of 1:1 kV grade of size not exceeding 25 Sq.mm in the existing RCC Hume/Stone/Ware/G.I. pipe as required.

Laying of one number PVC insulated and PVC sheathed power cable of 1.1 kV grade of size exceeding 25 Sq.mm but not exceeding 400 Sq mm in the existing RCC/Hume Stoneware/G.I. Pipe as required.

Copper wound 200 kva

Supplying installing and testing of AB isolating switch assembly set gang operated suitable for 11/0.4 KV, DP structure with brass part contacts, operating rod with required GI pipe, handle locking arrangement on On-Off position conforming to IS complete with required material and installing on existing structure to complete the job as required as per specification.11 kv

Supplying, installing ,testing of 11 KV D.O. fuse assembly with brass part contact for 11/0.4 KV DP Structure set of 3 with fuse with barrel with required fuse element & other materials as per specification on existing D.P. structure as required.(set of 3nos.)11kv

Supplying, installing, testing and commissioning of Lightning Arrestors(i) 11 KV Gapless, line type

Supplying, installing, testing of earth Coil (coil of 115 turns of 50mm dia, and 2.5 Mtrs. Lead of 4 mm G.I wire.

Supplying and installing Double wall corrugated pipes (DWC) of HDPE ( IS 14930 Part II -marked ) for cable laid under ground with necessary connecting sockets/ couplings,tees of same material and at required depth upto 90cm. below road/ground surface,including excavation, back filling with excavated material with ramming and making the surface good. 63.00mm outside dia.

Supplying and installing Double wall corrugated pipes (DWC) of HDPE ( IS 14930 Part II -marked ) for cable laid under ground with necessary connecting sockets/ couplings,tees of same material and at required depth upto 90cm. below road/ground surface,including excavation, back filling with excavated material with ramming and making the surface good. 200.00mm outside dia.

Supplying of street light with high power LED of 1 to 3 W each assembled on single MCPCB, system lumens output with efficacy>110 lm/W. luminiare having color temp 6500K & 50000 burning hrs life with minimum @ L 70, The colour rendering index of LED light should be more than 70. Luminiare comprises of driver, PF 0.95 & surge protection 4KV. Housing made of pressure die cast aluminium with heat resistant flat glass / Lens type, IP66 protection. Submission LM 80-08 Form LED Source Manufacturer & LM79- 08 / IS16106 from NABL approved lab. Manufacturer manadatory i/c 50mm.dia G.I. Pipe bracket upto 2 mtr. long in required angle/shape, connection lead, testing etc to complete the job. 2 Yrs Guarantee certificate from manufacturer.40W / 48W

Supplying of flood light with high power LED of 1 to3 W each assembled on single MCPCB, system lumens output with efficacy>110 lm/W. luminiare having color temp 6500K & 50000 burning hrs life with minimum @ L 70, The colour rendering index of LED light should be more than 70. Luminiare comprises of driver, PF 0.95 & surge protection 4 KV. Housing made of pressure die castaluminium with heat resistant flat glass, IP66 protection.Submission LM 80-08 Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer manadatory i/c connection lead, testing etc to complete the job. 2 Yrs Guarantee certificate from manufacturer.60W

Supplying of ISI Marked Automatic Star-Delta Starters confirming to IS : 13947-4 with suitable over load relay range and contactor size & timer 415 V , 3 -Phase with two earthing terminals 10.0 HP

Supplying &installation of approved make required capacity 3 phase, 50 Hz, 415V, open well submersible pump, with control panel starter with dry run protection, single phase preventer, connections, etc. as required as per specifications but excluding pipe and connection cable. 10.0 HP head metre 18-40, discharge LPM 1620-570

Painting of poles Prima coat over new steel and other metallic surface with red oxide zinc chromide paint complete with supply of material labour etc. including preparation of surface.

Prima coat with aluminium paint, brushing complete with material and labour including preparation of surface

Supply, fabrication and erection of angle/channel/flat iron fitting for overhead line & sub-station etc such as 'D' bracket, cross arms, top clamp, 'V' cross arms, back/support clamp or other similar work etc. including nut bolts of required size, making holes, fabrication, welding, cutting, etc. and painting with one coat of red oxide paint & two coat of aluminium paint as required as per specification.

Supplying and fixing of analog time switch for automatic ON - OFF street light of approved make in existing LT panel including connections etc. as required as per specification

Supplying and fixing of contractor 2 Pole rating 240/415V :for ON - OFF street light of approved make in existing LT panel including connections etc. as required as per specification 25 A

Supplying and fixing of contractor 2 Pole rating 240/415V :for ON - OFF street light of approved make in existing LT panel including connections etc. as required as per specification 40 A

Supply, installation, testing & commissioning of LT trivector energy meter, DLMS compliant category-A (for substation/feeder metering) , 3 phase 4 wire, 440 Volts, 5 Amp, accuracy class 0.5S with GSM(GPRS compatible) modem suitable for required C.T. 5A duly tested from electricity board with uPVC box .

Supplying and fixing of MCB/Connector mounting Corrosion proof mild steel DIN Rail of thickness 2.5mm to 4mm in existing box as required as per specification:

Supply and fixing of single pole connector DIN Rail mounted Insulating body made from Polyamide 6.6 conforms to UL 94 standard, IEC 60947-7-1, 1000Volt in existing box as required as per specification:Suitable for 6sqmm-16sq mm cable

Providing and layingin position specified grade of reinforced cement concrete excluding the cost of centering,shuttering, finishing and reinforcement - All work up to plinth level : Cement concrete grade M-20 (Nominal Mix)with 20mm maximum size of stone aggregate.

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding upto floor level including cost of binding wire, wastage and over laps upto 12mm horizontal/ inclined position of reinforcement bars in slab and beams, plinth, chajjas, lintels, upto 4.5m vertical length of reinforcement in wall columns (over laps shall be provided as per requirement of IS : 13920; IS 456 & SP : 34) etc. complete.Thermo-Mechanically Treated bars. (Fe 500 D or more)

Centering and shuttering including strutting, propping stretching etc. complete for and removal of form work by sheet plate or ply wood shuttering for : Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc

Centering and shuttering including strutting, propping stretching etc. complete for and removal of form work by sheet plate or ply wood shuttering for : Columns, Pillars, Piers, Abutments, Posts and Struts.

Brick work will well burn topen bhatta bricks crushing strength not less than 25kg/cm² and water absoption not more than20%in above plinth level upto floor two level in cm 1:6 including the cost of scaffholding etc.

Providing and fixing ISI marked flush door shutters conforming to IS: 2202(Part I) decorative type,core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or crossbands and face veneers on both faces of shutters using following hinges. 25mm thick (for cup board) including ISI marked nickel plated bright finished M.S.Piano hinges IS:3818 fixed with necessary screws.

Providing and fixing ISI marked oxidised M.S.door latches conforming to IS:5930 with screws etc. complete :300 x 20 x 6mm

Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :150 x 10mm

Providing and fixing ISI marked oxidised M.S.handles conforming to IS:4992 with necessary screws etc. complete : 125mm

Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Twin rubber stopper

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 300x16 mm

Providing and fixing 1mm thick M.S.sheet sliding-shutters with frame and diagonal braces of 40x40x6mm angle iron, 3mm M.S. gusset plates at the junction and corners 25mm dia pulley, 40x40x6mm angle and T-iron guide at the top and bottom respectively including applying a priming coat of approved steel primer.

Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Fixing chowkhats ine xisting opening including embedding chowkhats in floors or walls cutting masonry for holdfasts embedding hold fasts in cement concrete blocks with cement concrete grade M-10 (Nominal Mix with 20 mm maximum size of stone aggregate)painting two coats of approved wood preservative to sides of chowkhats and making good the damages to wall sand floors as required complete including disposa of rubbish to the dumping ground within 50 meter lead :Door chowkhats

Precast terrazo tiles18-20mm thick with graded marble chips of size upto 12mm laid in floors,and landings,jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete with precast tiles on 20mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) Dark shade using ordinary cement.

12 mm cement plaster of mix : 1:4 (1 cement: 4 sand)

6 mm cement plaster of mix : 1:3 (1 cement: 3 fine sand)

20 mm cement plaster of mix :1:4 (1 cement: 4 sand)

Painting on G.S.sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Newwork (two or more coats)including a coat of approved steel primer but excluding a coat of mordant solution.

Wall painting with plastic emulsion paint of approved brandand manufacture to give an even shade: Two or more coats on new work

Applying one coat of cement primer of approved brand and manufacture on wall surface : Cement primer.

Finishing walls with Acrylic Smooth exterior paint of required shade: New work (Two or more coat applied @1.67ltr/10sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)

Providing precast cement concrete Jali of cement concrete grade M-15(NominalMix with 6mm maximum size of stone aggregate reinforced with 1.6 mm dia mildsteel wire including centering and shuttering,roughening cleaning,fixing and finishing in cement mortar1:3(1cement:3 fine sand) etc.complete excluding plastering of the jambs, sills and soffits.40mm thick

Clearing jungle including uprooting of rank vegetation,grass, brushwood,trees and saplings of girth upto30cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 meter outside the periphery of the area cleared.

Clearing grass and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared

Repairs to plaster of thickness12mm to 20mm in patches of area 2.5sq.meter and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground with in 50 meters lead :With cement mortar 1:4 (1 cement : 4 fine sand)

Providing and fixing Float glass panes 4mm thick glass panes

Extra for Providing frosted glass panes 4mm thick instead of ordinary float glass panes 4mm thick in doors,windows and clerestory window shutters.(Area of opening for glass panes excluding portion inside rebateshall be measured).

Raking out joints in lime o rcement mortar and preparing the surface for re-pointing or replastering including disposal of rubbish to the dumping ground within 50 meters lead.

Removing dry or oil bound distemper,water proofing cement paint and the like by scrapping,sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Dismantling old plaster or skirting upto 15mm thickness,raking out joint sand cleaning the surface for plaster upto two floor level including disposal of rubbish within 50 meters lead and including scaffolding etc.

Demolishing cement concrete manually /by mechanical means including disposal of material with in 50meters lead as per direction of Engineer-in-charge.1:3:6 or richer mix

Demolishing brick work manually /by mechanical means including stacking of serviceable material and disposal of unserviceable material with in 50 meters lead as per direction of Engineer-in-charge In cement mortar

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead. Of area 3 sq. meters and below

Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: (a)after surface preparation,first layer of slurry of cement @0.488 kg/sqm mixed with water proofing cement compound @0.253 kg/sqm. (b)laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c)third layerof 1.5mm thickness consisting of slurry of cement @ 1.289kg/sqm mixed with water proofing cement compound @0.670 kg/sqm and coarse sand @1.289kg/sqm.This will be allowed to air cure for 4 hours followed by water curing for 48 hours.The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around.

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C.,kitchen and the like consisting of : a) Ist course of applying cement slurry @4.4Kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. b) IInd course of 20 mm cement plaster 1:3 (1cement:3sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. c) IIIrd course of applying blown or residual bitumen applied hot at 1.7Kg. per sqm of area. d) IVth course of 400 micron thick PVC sheet.(Overlaps at joints of PVC sheet should be100mm wide and pasted to each other with bitumen @ 1.7 Kg/sqm.) (with 5 years service guarantee)

Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.

Providing and fixing in position collapsible steel shutters (Channel Gate) with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6 mm with 40 mm dia,steel pulleys complete with bolts,nuts,locking arrangement,stoppers,handles,including applying a priming coat of approved steel primer.Rates includes recess cutting in floor and making good the same where ever required.

Providing and laying Ceramic glazed floor tiles 300x300 mm or more ( 6 to 7 mm thick)of 1st quality conforming to IS:15622 of approved make in colours such as White,Ivory,Grey,Fume Red Brown,laid on 20 mm thick Cement Mortar1:4 (1Cement:4Coarse sand) including pointing the joints with whitec ement and matching pigmentetc.,complete.

Floor polishing on masonry or concrete floors with wax polish of approved brand and manufacture.

Providing and fixing chicken mesh as per ISI specification and in the required width with 50mm long Bombay nails on vertical and horizontal junctions of RCC and brick wall including scaffolding and all lead and lift etc. complete before plastering upt 10 meter height.

Providing and fixing white vitreous china water closet squatting pan (Indian type) P or S trap,complete including cutting and making good the walls and floors wherever required :Orissa pattern W.C. pan of size 580x440 mm

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete,including cost of cutting and making good the walls and floors : 100 mm inlet and 100 mm outlet Spun cast iron S&S as per IS: 3989.

Providing and fixing on wall face unplasticised PVC moulded fittings / accessories for unplasticised (PVC-u)soil and waste pipes conforming to IS:13592 Type B including jointing with sealring conforming to IS : 5382 leaving 10 mm gap for thermal expansion Vent Cowl (Self Fit) 75 mm

Providing and fixing on wall face unplasticised PVC moulded fittings / accessories for unplasticised (PVC-u)soil and waste pipes conforming to IS:13592 Type B including jointing with sealring conforming to IS : 5382 leaving 10 mm gap for thermal expansion Vent Cowl (Self Fit) 110 mm

Single Y with Door 75 mm

Single Y with Door 110 mm

Providing and fixing square-mouth S.W.gully trap grade 'A'’ complete with C.I.grating brick masonry chamber with water tight C.I.cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70kg as per standard design:With Modular Bricks class designation 40.150 x 100 mm size P type.

Providing and placing on terrace at all floor polyethylene water storage tank ISI:12701 marked with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. External work 15 mm nominal outer dia .Pipes.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. External work 25 mm nominal outer dia .Pipes.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. External work 40 mm nominal outer dia .Pipes.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. External work 50 mm nominal outer dia .Pipes.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 - 15 mm nominal bore.

Providing, laying, jointing & testing of following P.V.C. pipes with solvent cement joint for 6, 8 and 10 kg/ sq.cm. pressures including testing of joints, cost of jointing materials etc. complete in all respect.6Kg/Cm2 90 mm dia

Providing, laying, jointing & testing of following P.V.C. pipes with solvent cement joint for 6, 8 and 10 kg/ sq.cm. pressures including testing of joints, cost of jointing materials etc. complete in all respect.6Kg/Cm2110 mm dia

Providing and laying in position following PVC Tees, suitable for 6, 8 and 10 Kg/Sqcm. Pressure pipes.6Kg/Cm2 90 mm dia

Providing and laying in position following PVC Tees, suitable for 6, 8 and 10 Kg/Sqcm. Pressure pipes.6Kg/Cm2 100 mm dia

Providing and laying in position of following PVC Reducers suitable for 6, 8 and 10 Kg/Sq cm. Pressure pipes.6Kg/Cm2 110 x 90 mm

Providing and laying in position of following PVC Reducers suitable for 6, 8 and 10 Kg/Sq cm. Pressure pipes.6Kg/Cm2 160 x 110 mm

Providing and laying in position PVC coupler suitable for 6, 8 and 10 Kg/Sq. cm. Pressure pipes.6Kg/Cm2 90 mm dia.

Providing and laying in position PVC coupler suitable for 6, 8 and 10 Kg/Sq. cm. Pressure pipes.6Kg/Cm2 110 mm dia.

Providing and laying in position following PVC bends suitable for 6, 8 and 10 Kg/Sq. cm. pressure pipes. 90 mm dia.

Providing and laying in position following PVC bends suitable for 6, 8 and 10 Kg/Sq. cm. pressure pipes. 110 mm dia.

Providing, Supplying and fixing of PVC Ball Valves in PN16 rating with one end compression using Blue colour compression nut in polypropylene material & other end with female threads conforming to ISO:4422-4, certified from certified agencies suitable for food products & drinking water, female threads in accordance with ISO:7/BS:21/ IS: 554 and shall be inclusive of all cost of testing of all materials, inspection charges, transportation upto site, transit insurance, loading, unloading, stacking etc. complete PVC Ball Valve with Compression & Female Threads 20x15mm

Providing, Supplying and fixing of PVC Ball Valves in PN16 rating with one end compression using Blue colour compression nut in polypropylene material & other end with female threads conforming to ISO:4422-4, certified from certified agencies suitable for food products & drinking water, female threads in accordance with ISO:7/BS:21/ IS: 554 and shall be inclusive of all cost of testing of all materials, inspection charges, transportation upto site, transit insurance, loading, unloading, stacking etc. complete PVC Ball Valve with Compression & Female Threads 25x20mm

Providing, Supplying and fixing of PVC Ball Valves in PN16 rating with one end compression using Blue colour compression nut in polypropylene material & other end with female threads conforming to ISO:4422-4, certified from certified agencies suitable for food products & drinking water, female threads in accordance with ISO:7/BS:21/ IS: 554 and shall be inclusive of all cost of testing of all materials, inspection charges, transportation upto site, transit insurance, loading, unloading, stacking etc. complete PVC Ball Valve with Compression & Female Threads 50x40mm

Circuit Wiring Wiring for circuit wiring with PVC insulated cable FR with copper multi strand conductor ISI marked in Surface rigid P.V.C. CASING AND CAPPING of ISI marked suitable size including painting etc. as required as per specificationa) 2x2.5 Sq.mm.

Light Point/Fan Points. a) Short point

Light Point/Fan Points. b) Medium point

Light Point/Fan Points. c) Long point

3 Pin 6 Amp socket outlet on Separate Boarda) Short point

3 Pin 6 Amp socket outlet on Separate Board b) Medium point

3 Pin 6 Amp socket outlet on Separate Board c) Long point

Point wiring including metallic switch box, sheet, switche, socket for 3 pin 6 Amp. Socket outlet point with 1.5 Sq. mm. PVC insulated cable FR with copper multi strand conductor ISI marked in Surface rigid P.V.C. CASING AND CAPPING ISI marked of suitable size and 1.5 Sq. mm. PVC insulated copper earth continuity conductor of green colour inside casing & caping with required materials as per specification on same board

CIRCUIT WIRING IN EXISTING CONDUIT / PVC CASING CAPPING Supplying and drawing single core PVC insulated cable FR with copper multi strand conductor ISI marked in existing rigid conduit in surface or concealed as per specification.4.00 Sq mm cable (Sub main) 3 X 4.00 sq mm

Suppyling of ISI Marked Switch Fuse Unit (rewirable type ) triple pole with neutral link ,415 Volt having conduit / cable gland entry with two earthing terminals confirming to IS : 13947(Part I & III) .63 Amps.

Supplying of ISI Marked and accepted standard of Miniature Circuit Breaker (MCB) of 'C' series suitable for 240/415 Volts, 50 Cycle , 10 kA Value AC supply confirming to IS : 8828 : 1996, IEC : 60898:2002 but without enclosures :-SINGLE POLE (SP) 6 Amp to 32 Amp Rating

DOUBLE POLE (DP)6 Amp to 32 Amp Rating

Supply of approved make powder coated sheet steel encloser SPN MCB DB inclusive of Busbar, Neutral bar, Earth bar & two earth terminals etc. complete as per IS:13032 (exclusive of MCB & isolator)- 4 way single door

Fixing of MCB / Isolator SP/DP in sheet steel enclosure as required as per accepted practice, including mounting on busbar and cable connection etc. complete (Labour only )

Labour charges for fixing sheet steel enclosure, MCB DB surface mounting type, as per accepted practice on 25x5mm flat iron clamps duly embedded in wall,cable connection etc. complete.FOR S.No :-8.5 (1) to 8.5 (4)

Supplying and fixing as per specification Bulk Head fitting of approved make suitable for 100 Watt lamp with necessary materials complete.

Supplying and fixing of LT Panel accessaries of approved make in existing LT Panel including connections etc.as required as per spececification Aluminium bus bar strips with PVC sleeves

Supplying and fixing of LT Panel accessaries of approved make in existing LT Panel including connections etc.as required as per spececification LED lamps

Suppling and fixing of approved make step type electronic Fan regulator including connection etc. as required on existing board 450 Watt

Earthing with G.I. Earth plate 600mm X 600mm X6mm thick including accessories and providing masonary encloser in cement mortor, cover plate having locking arrangment on the top and G.I. watering pipe 20mm dia 2.7 Meter long etc. (but without charcoal or coke and salt ) complete as required.

Add Extra for using salt and charcoal / coke for G.I. Plate or Copper plate earth electrode as required including excavation & refilling.

Supplying and laying 8 SWG copper wire at 0.5 Meter below ground level as conductor earth electrode including soldering etc. as required.

Supplying and laying 6 SWG G.I. wire at 0.5 Meter below ground level as conductor earth electrode including soldering etc. as required.

Supplying and laying 25mm X 5mm G.I. strip at 0.5 Meter below ground level as strip earth electrode including soldering etc. as required.

Providing back filling compund suitable for safe earthing device.

Supply of XLPE Insulated power cable (conforming IS-7098) 1100 Volt grade/Heavy duty power cable conforming to IS 1554-1100 Volts grade , 2 core /3½ core/4 coreISI MARKED with Alu. Stranded /solid conductor ARMOURED 4 CORE 35 Sq.mm(XLPE)

CABLE LAYING Laying of underground cable armoured./ unarmoured as per specification in air with approved type of iron clamps complete. 3 / 3½ / 4 Core cable 25 Sq.mm to 120 Sq.mm

Supply and fixing of LED tube rod comprising of LED tube with non integral / integral driver, 6500K color temp having 40000 burning hrs life with minimum @ L 70, system lumen output should be minimum with efficacy > 80 lm/W. LED driver PF 0.95 & THD < 20%. The colour rendering index of LED light should be more than 70.Submission LM 80-08 Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer mandatory i/c connection wire, testing etc.to complete the job. 2 Yrs Guarantee certificate from manufacturer. 1 X 5/8W Integral Tube fitting complete

Supply and fixing of LED tube rod comprising of LED tube with non integral / integral driver, 6500K color temp having 40000 burning hrs life with minimum @ L 70, system lumen output should be minimum with efficacy > 80 lm/W. LED driver PF 0.95 & THD < 20%. The colour rendering index of LED light should be more than 70.Submission LM 80-08 Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer mandatory i/c connection wire, testing etc.to complete the job. 2 Yrs Guarantee certificate from manufacturer. 1 X 18/20/22W, Integral

Supplying and fixing PVC conduit ISI marked FRLS along with accessories on surface etc. as required PVC conduit 20 mm. (MMS)

Supplying and fixing fan clamps of 16 mm dia steel bar as per specification complete :-For existing old R.C.C. Slabs / Beams

Supply, fabrication and erection of angle/channel/flat iron fitting for overhead line & sub-station etc such as 'D' bracket, cross arms, top clamp, 'V' cross arms, back/support clamp or other similar work etc. including nut bolts of required size, making holes, fabrication, welding, cutting, etc. and painting with one coat of red oxide paint & two coat of aluminium paint as required as per specification.