SPL REPAIRS TO INTERNAL ROADS AT 11 GRRC UNDER GE (WEST) LUCKNOW.

M&L for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with broom and and finally fanning the cleaned surface with gunny bags to remove all loose dirt/ dust etc and applying evenly a priming / tack coat with bituminous primer using paving bitumen VG 10 @ 5Kg /10 sqm complete all as directed

M & L for 30 mm thick consolidated thickness bituminous premix semi dense asphaltic concrete with 5.50 % binder content (bitumen of grade VG-30) by weight of total mix, laid by mechanical paver, rolled and compactad to required camber and gradient complete all as specified and as directed.

M&L for Premix Bituminous macadam, (consolidated thickness not more than 75 mm) with 4% paving bitumen binder of VG 30, by weight of total mix, rolled and compacted to required camber and gradient with power roller to a uniform smooth surface as specified and as directed

Providing & fixing as in repair of "Cat Eyes " of size not more than 130 mm and height not more than 20 mm made out of strong engineering high impact resistant polymer with electronic welded lenses for retro reflective in dry and wet weather conditions along road complete all as specified and directed.

Supply and Fixing in repair Solar road studs having 3 LEDs of colour red/yellow to a side (total 6 Nos) housed in a tough pressure casted aluminium alloy of size 125 x 125mm with built in stem of suitable length for fixing with epoxy. LEDs, solar -cells, 1600MAH battery & light sensor well protected inside under tough unbreakable polycarbonate transparent sheet roof, system workable for 2-3 days (nights) after full charge in 8-10hours complete all as specified and directed.

M & L for providing and laying 2.5 mm thick hot applied thermo plastic road marking paint on roads, pavements and the like not exc 10cm wide in uniform thickness with glass beads as per clause no 803 of MORTH specification including cleaning of roads surface, heating the materials with in specified tempreture limits for marking with all necessary arrangements required complete all as specified and directed.

M & L for providing and laying 2.5 mm thick hot applied thermo plastic road marking paint on roads, pavements and the like exc 10cm wide in uniform thickness with glass beads as per clause no 803 of MORTH specification including cleaning of roads surface, heating the materials with in specified tempreture limits for marking with all necessary arrangements required complete all as specified and directed.

Demolition of brickwork built in cement mortar or cement lime mortar complete all as specified and directed

M&L for old size brick work with fly ash brick straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

M & L for brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick wall in CM 1:4 complete all as specified and directed.