Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹46.9 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹49.9 L+₹3.0 L (6.33%)Rejected-Finance | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹49.9 L+₹3.0 L (6.38%)Rejected-Finance | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹50 L+₹3.1 L (6.50%)Rejected-Finance | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹51.5 L+₹4.5 L (9.62%)Rejected-Finance | L5 | Rejected-Finance Not Lowest |
Tender Value
₹46.6 L
EMD Value
₹93,220
Closing Date
12 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE I R and D Kanchanbagh
GE I R and D Kanchanbagh Kanchanbagh Post Hyderabad 500058
PROVN OF RCC FOUNDATION WITH EXTERNAL POLE HIGH BAY LUMINARIES INCLUDING CONNECTED EXTERNAL SERVICES IN DRDO TOWNSHIP AREA UNDER GE(I) RND KANCHANBAGH HYDERABAD
2024_MES_645485_2
8746/E8
Open Tender
Electrical and Maintenance Works
Item Rate
240 days
GE I R and D Kanchanbagh
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
GE I R and D Kanchanbagh
₹93,220
Yes
6 Jun 2024
29 Mar 2024
15 Apr 2024
29 Mar 2024
12 Apr 2024
5 Apr 2024
29 Mar 2024 - 3 Apr 2024
Amount
Design, Supply, installation, testing at site and comissioning 16 metre high mast suitable for 180 KM/hr wind speed and suitable for mounting maximum 8 Nos of 1x200 Watt LED flood lights symmetrically fitted consisting of the following : (a) Hot dip galvanised (internally and externally) Mast 16meter high having top diameter 150mm and bottom diameter 410mm continuously tapered, in two sections, 20 side polygon made out of high tensile steel plates S 355 grade as per BS-EN 10 025 having only one longitudinal weld and no circumferential weld joint for each section, bottom section 10.980 mtr long made of 4mm thick sheet and top section 5.47 mtr long made of 3mm thick sheet, both sections jointed at site by slip stress fit method with min overlap. (b) Hot dip galvanised Base plate having dia 570mm made out of 25mm thick galvanised high tensile steel plates S 355 grade as per BS-EN 10 025, drilled holes for and including 8 Nos 30mm dia 850mm long TS 600 type foundation bolts. (c) Luminaires carriage 710mm internal dia, made out of Hot Dip galvanised 50mm ERW class 'B' MS pipe galvanised, 08 arm two sections having welded flanges and jointed at site by means of steel bolts etc, suitable for maximum 08 luminaires including holes for cable crossing and cast aluminium weather proof junction box for cable connections. (d) Winch for raising and lowering of luminaires with carriage having safe working load 750 kg, double drum having oil bath type self lubricating worm gear, with two continuous steel wire ropes 7/19 construction 6mm dia, AISI 316 grade having breaking cap 2350 Kg, operated with single speed three phase electric motor of appropriate capacity and manually by means of handle in case motor is faulty or failure of electric supply, complete with ratchet, limit switches etc as per standard engineering practice to avoid falling of carrirer during raising or lowering.
(e) Single trailing cable 1100 volts grade with flexible copper conductor EPR insulated PCP sheathed min 6.00 Sqmm, 10 cores suitable for 08 luminares or independent electric connection for each luminaire all as required and directed. (f) Weather proof hinged opening with locking arrangement at bottom of the mast for installation of winch and electric panel as per manufacturer recommendations. (g) Provision of PCC/RCC foundation including design (M 30 grade concrete) as per manufacturer's recommendations suitable for 16 metres high mast with accessories as detailed in respective item and casting at site including necessary earth work as required for foundation complete all as directed by the Engineer in charge. Note : High mast shall be installed under guidance of Company's engineer. Flood Light fittings shall be measured and paid separately).
Supply and fixing LED flood light 170 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp. Make: Havells/Polycab/Crompton/Shakti
Material and labour for earthing complete with galvanized steel earth plate electrode 60×60cm× 6mm thick, buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less'than 1.5 meters below normal ground level, connected to galvanized earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion.
Material & labor for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sq. mm 4 core. Make:- Gloster/KEI/Havells/Polycab
Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5metre in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, tubular poles or laying of pipes, or for removal / laying of cables etc., not exceeding 10 sq m on plan and not exceeding 1.5 m in depth and getting out in hard/dense soil, including trimming sides of foundations and forming bottom surface to required level, complete all as specified and directed by Engr in charge.
M & L Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed . NOTE:- Punned thickness shall only be measured and paid.
Supply and laying common burnt clay building bricks, sub-class grade "B" designation 75 Old size bricks all as specified and directed by Engr in charge.
Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm all as specified and directed by Engr in charge.
Removing excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point all as specified and directed by Engr in charge.
S&F automatic timer switch distribution board, factory assembled in powder coated sheet steel enclosure, 3 Phase, suitable for 6KW load, comprising of 32 Amps, 3 Pole, MCB, 32A power contactor and 230V digital timer switch for controlling street lights outdoor type, including angle iron base and stand for fixing the panel with suitable PCC foundation as per site requirement . Make: Havells/L&T/C&S/Legrand
M/S PAVANI ENTERPRISES
Anjana corporation
Venkat Sai Enterprises
ELEVATORS MAINTENANCE ENGINEER WORKS
Maruthi international
SUN LIGHT HOUSE
BHAGYARAM ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .