COMPREHENSIVE MAINT OF AIR ENCLAVE AND MAINT OF INTERNAL AND EXTERNAL FINISHES TO MD/OTM ACCN IN SOUTH CAMP UNDER AGE BR-II AT AF STN BAMRAULI

Amount

Resecuring or easing & adjusting, without taking down, shutters of any description not exceeding 1 Sqm complete.

Refixing shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each in the same opening after taking down, easing and adjusting including refixing builders hardware as required and renewal of unserviceable screws complete.

Demolition of unreinforced cement Concrete of any description and in any position not otherwise specifically provided for etc complete all as specified and directed.

M&L for plain cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in any position etc complete all as specified and directed.

M&L for Anti-termite treatment at along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron etc all as specified and directed.

M&L for Anti-termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same etc all as specified and directed.

M&L for Anti-termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors etc all as specified and directed

M&L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sq. m but not exc 4 sq. m each complete all as specified and as directed by the Engineer-in-Charge

Taking down chowkats or frames with shutters (without taking off shutters from the frames) n exc. 1.5 sq. m each complete all as specified and as directed by the Engineer-in-Charge

S&F 2nd Hard wood, Plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue painted at joints.

S&F 40mm thick 1st class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides(feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats etc complete all as specified and directed

S&F 35mm thick 1st hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats including wire cloth etc complete all as specified and directed

S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and directed.

S&F 300mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed etc complete all as specified and directed

S&F 125mm size Butt hinges, extruded brass, with brass hinge pin, bright pol ished and fixed, type B-11 etc complete all as specified and directed

S&F 200mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed etc complete all as specified and directed

S&F 150mm long floor door stopper of ,brass body and tongue with hard drawn steel spring fixed in floor etc complete all as specified and directed

S&F 150mm long Extruded brass handles, fabricated type polished etc complete all as specified and directed

S&F for powder coated aluminium anodised window openable/fixed type/three track sliding type weighing not less than 1.35 Kg/RM including 5mm thick glass and wiremesh fixed with beading & rubber gasket. The aluminium member of shutter is 65x40mm alongwith aluminium handle & tower bolt / locking device for sliding shutters etc complete in all as specified and directed.

S&F for powder coated anodised aluminium frame partition including 5mm thick glass with door shutters with rubber gasket, joining cleat for fixing etc complete all as specified.

S&F Mortice lock, brass 4 lever vertical type, size 65 mm etc complete all as specified

M&L for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats

M&L for preparing new or previously untreated surfaces of wood or wood based materials of any description exc 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparing old surfaces of wood or wood based materials of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint etc complete all as specified and directed.

Dismantling floor hearth or wall tilling including cement mortar bedding , removing serviceable tiles to stack and rubbish off the premises complete all as specified.

M&L for 25mm thick cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in leveling course etc complete all as specified and directed.

M&L for Screed bed or bedding layer of mortar (1:4) 20 mm thick for laying floor finishes

M&L for 10 mm thick vitrified anti skid Endura max grip with pavement tiles each tile not exceeding 0.36 Sqm in floors etc coloured for floor / pavement etc & jointed in neat cement slurry and pointed with white cement mixed with colour pigment to match colour of tiles complete all as specified and directed.

M&L for Virified Ceramic tiles dark shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.34 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed layer in CM (1:4) for lying floor finished complete all as specified.

M&L for Non Skid ceramic tiles coloured (square/ rectagular) area of each tile exceeding 0.09 Sqm but not exceeding 0.38 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed layer in CM (1:4) for lying floor finished complete all as specified.

M&L for Glazed ceramic coloured tiles size 600mm x 300mm x 7mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade tile over and inclduing 10mm thick rendering in CM (1:4) complete all as specified.

S&F in repair shower pannel made of anti-finger print stainless steel body, in-built ABS top shower with 60 nozzles+ water fall, 2 movable ABS body top shower with 60 nozzles+water fall, 2 moveable ABS body massage Jet, head shower with flexible hose, shelf, brass faucet body with thermostat mixer and 40 cm stainless steel barbed hose, multifunction water diverter for top shower, 1.5cm stainless steel double locked flexible hoses complete all as specified and directed.

S&F in repair One piece Vitreous china wash down water closet (Pedestal Pattern) size 645mmx35mmx730mm 'white' with soft close seat cover & twin flush fittings, etc all as specified in Particular specifications.

S&F in repair vitreous china counter wash hand basin snow white miniumum size 560mmx470mm fixed in grante slab including angle iron brackets below granite slabs & chromium plated brass coupling, complete all as specified in particular specifications.

M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified.

S&F in repair bottle trap with necessary assembly etc complete all as specified and directed.

S&F chromium plated brass centre hole hot and cold mixer fixed in wash hand basin etc complete all as specifed.

S&F PVC braided connection, complete all as specified.

S&F Chromium plated toilet paper holder

S&F Toughned glass as in hinged / sliding doors, partitions automatic doors and similar work including cutting to shape, drilling holes and reqd fixing accessories like clamps cleat, fixing channel / Rod & Handle for door required etc complete all as specified and directed

S&F in repair Chromium plated Towel rail 600mm all as specified

S&F in repair Chromium plated Towel ring all as specified

S&F in repair SOAP DISH holder all as specified

S&F in repair Towel rack with lower hanger 600mm all as specified

S&F in repair Chromium plated SOAP dispenser with glass bottle holder all as specified

S&F in repair two way bib taps chromium plated cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe of bore 15mm complete

S&F Mild steel chromium plated grating 100 mm dia, fixed in repairs to Nahani traps complete.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified

S&F Chromium plated angular stop cock (valve) with flange etc

S&F long neck bib tap etc

S&F in repair fancy type glass corner shelf with CP brackets etc complete all as specifed and directed.

S&F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete

S&F in repair curtain rods 20 mm bore, mild steel, chromium plated with fixing brackets, stops, rollers, knobs/finials etc complete all as specified

S&F in repair venation blinds vertical type, level or ultima 100mm width of strip with necessary pulling threads aluminium channel along with all arrangement fixed to wall complete all as directed

Taking down existing aluminium windows/door/partition and re-fixing the same after minor repairs replacement of rubber beading , aluminium strips and windows shutter side locking arrangementetccomplete all as specified and directed.

Hacking out old broken glass (any thickness and size or quality) from any frames glazed with putty or fixed with beads .

S&F sheet glass 4.8 mm, ordinary quality and glazing with oil putty/aluminium beading in any shape exc 0.5 sq. m in each pane fixed with rubber beeding complete.

Dismantling boarding, like wall paneling or false ceiling in any description, fixed in any position with nails

S&F 605mm x 605mm size anodised aluminium snap grid frame work for false ceiling all as specified

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

S&F 12mm thickness gipsum board pannel including aluminium false ceinling snap grid frame work size 605 x 605 mm with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. etc all as specified and directed

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing

S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing duly fitted into the wall etc all as specified and directed

S&F Solar control film 50 micron reflective type sticked to glass panels as per manufacturer’s instructions complete all as specified and directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging of Fe-410-W(Gde-E250 quality B) also fastening and fixing complete

M&L for fixing Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6M mean radius, built in cement mortar 1:6 etc complete all as specified and directed

M&L for rendering 15mm thick in cement mortar (1:4), on fair faces or brick work or concrete surfaces, finished even and other than fair face complete all as specified and directed.

S&F in repair Stainless steel plate rack of size 780x900x250mm fixed in repair complete.

Taking down 15 mm dia steel tubing and connections including accessary etc all as specified and directed.

S&F 15 mm bore galvanised steel water tubing 'medium grade' with all fittings and fixed to walls, ceiling or laid in floors etc. complete all as specified and directed.

Taking down 20 mm dia steel tubing and connections including accessary etc all as specified and directed complete.

S&F 20 mm bore galvanised steel water tubing 'medium grade' with all fittings and fixed to walls, ceiling or laid in floors etc. complete all as specified and directed.

S&F Fibre glass reinforced translucent sheeting plain/corrugated fixed with coach screw and washer in roof, wall etc

S&F of 18 mm thick Celuka ply of prelaminated/ Rigid laminated of desired colour one side and other side plain colour fixed with screws/ solvent cement/adhesive to make kitchen cabinet sides, top and bottom and shelves inside the cabinets incl taking down of old unserviceable board complete as per specifications and as directed complete all as specified. (Note: Fabrication and installation work to be carried out by authorised Fabricator only.)

S&F of 18 mm thick Celuka ply one side prelam/rigid laminated and other side plain white colour to make kitchen cabinet Shutter/drawer front shutter incl taking down of old unserviceable board complete as per specifications and as directed complete all as specified. (Note: Fabrication and installation work to be carried out by authorised Fabricator only.)

S&F of 150mm wide for frames for fishing of shutters with 36 mm thick (18mm thick back to back sticked) Celuka ply of prelaminated/ Rigid laminated of desired colour one side and other side plain colour fixed with screws , solvent cement/adhesive to make wall mounted kitchen cabinet back and pull out drawer sides incl taking down of old unserviceable board complete as per specifications and as directed complete all as specified. (Note: Fabrication and installation work to be carried out by authorised Fabricator only.)

S&F in repair stainless steel (Grade S-304) basket (plain) of minimum size 50cm x 37cm x 10cm made of 4mm minimum dia S.S.Wire approved quality with suitable arrangement for fixing telescope channel complete all as specified and directed.

S&F in repair stainless steel (Grade S-304) thali basket (11-13 division) of minimum size 50cm x 37cm x 20cm made of 4mm minium S.S.Wire approved quality with suitable arrangement for fixing telescope basket Channel complete all as specified and directed.

S&F in repair stainless steel (Grade S-304) plate basket (11-13 division) of minimum size 50cm x 37cm x 16cm made of 4mm minimum dia S.S.Wire approved quality with suitable arrangement for fixing telescope Channel complete all as specified and directed.

S&F in repair stainless steel (Grade S-304) Partition basket of minimum size 50cm x 37cm x 16cm made of 4mm minimum thick S.S.Wire approved quality with suitable arrangement for fixing Telescope channel complete all as specified and directed..

S&F in repair stainless steel (grade S-304) Cutlary basket of minimum size 50cm x 37cm x 10cm made of 4mm minimum dia S.S.Wire and bottom of S S Perforated sheet approved quality with suitable arrangement for fixing Telescope channel complete all as specified and directed.

S&F in repair stainless steel (grade S-304) basket (plain) of minimum size 50cm x 37cm x 16cm made of minimum 4mm dia S.S.Wire approved quality with suitable arrangement for fixing telescope Channel complete all as specified and directed.

S&F in repair stainless steel (Grade S-304) bottle pullout of minimum size 50cm x 40cm x 16cm in two tier made of 4mm minimum dia S.S.Wire approved quality with suitable arrangement for fixing telescope Channel complete all as specified and directed.

S&F in repair stainless steel (Grade S-304) ball bearing telescope channel 20'' length (full extension mechanism) complete all as specified and directed.

S&F in repair Autocut Hydrolic (soft closing) stainless steel hinges openable at 0 degree for kitchen cabinet shutters complete all as specified and directed.

S&F in repair 75 mm dia oval shape SS handle fancy type polished bright finish for kitchen cabinet shutter complete all as specified and directed.

S&F in repair 150 mm dia oval shape SS handle fancy type polished bright finish for kitchen cabinet shutter complete all as specified and directed.

M&L for preparation of old treated steel surface of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint using Mechanical means complete all as specified

M&L for preparation of old decorated plastered/unplastered surface of walls and applying one coat of plastic emulsion paint complete all as specified and directed by mechnical mean.

M&L for Preparing old decorated plastered or unplastered surfaces of wall including cornices, pilasters etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and treating oil and greasy spots and applying one coat of weather proof paint (Exterior emulsion paint) Using Mechanical means complete all as specified and directed.

M&L for preparing old plastered or unplastered surfaces of walls and applying one coats of cement paint white or tinted Using Mechanical means complete.

Dismantling of plain or corrugated steel sheeting any gauge thickness including nainital or similar pattern all as specifed and directed

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensil strength of 550 Mpa as in roof covering to wall fixed with self tapping screws as specified.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames, glazed with putty or fixed with beads complete.

S&F sheet glass 4.8 mm, ordinary quality and glazing with oil putty in square & fixed with rubber beeding complete.

M&L for sheet glass ordinary quality3.0 mm thick and glazing with oil putty not exe 0.50 sqm in each pane complete all as specified and directed.

M&L for in repair for rubber bead/seal 40mm wide and 3-4mm thick to cover doors/window gap fixed with nails and make good to doors as in repair complete all as specified and directed.

S&F in repair floor door stopper 140mm, of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete.

S&F in repair pillar taps chromium plated cast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe of bore 15mm complete

Repair only to CP long body bib taps , pillar tab etc of any make by replacing spindle,nippule ,washer etc at any size etc complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including supply & fixing cantilever brackets of mild steel angle 35 x 35 x 5 mm and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete.

S&F in repair PVC waste pipe of 32mm dia suitable for WHB/kitchen sink complete all as specifed and directed.

S&F rotational moulded polythene water storage tanks, hoisted and fixed in position 500 ltrs capacity including 2 Nos GI union, checked nut and 25mm PTMT float Valve, overflow and washout GI medium grade pipe 15mm dia,Nippule complete all as specified and directed including Dismantling of old PVC tank and removing to store

S&F rotational moulded polythene water storage tanks, hoisted and fixed in position 1000 ltrs capacity including 2 Nos GI union, checked nut and 25mm PTMT float Valve, overflow and washout GI medium grade pipe 15mm dia,Nippule complete all as specified and directed including Dismantling of old PVC tank and removing to store

Cleaning and removing all scale and dirt, etc from water tanks of capacity exceeding 250 litres but not exceeding 500 litres and from mouth of circulating pipes and mention date of cleaning etc complete.

Cleaning and removing all scale and dirt, etc from water tanks of capacity exceeding 500 litres but not exceeding 1000 litres and from mouth of circulating pipes and mention date of cleaning etc complete.

S&F in repair ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 25 mm bore (minimum weight 455 gms) complete.

S&F in repair PVC cover (Lid) for OHT of capacity 500 Ltr complete.

S&F in repair PVC cover (Lid) for OHT of capacity 1000 Ltr complete.

S&F frame work such as guard bars etc with ends of bars shouldered and or welded or forged into spikes etc and similar works conforming to Fe-310-0 .complete all as specified

Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete.

M&L for rendering 15mm thick in cement mortar 1:6 on faces of brick work or concrete surfaces, finished fair and even complete.

M&L for rendering 15mm thick in cement mortar 1:4 on faces of brick work or concrete surfaces, finished fair and even using water proofing compound @3% by weight of 50 kg cement as per manufacturer instructions complete all as specified and directed. (Note: water proofing compound shall be measured and paid seperately under respective item).

M&L for rendering 10 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished fair & even complete.

Supply only Integral waterproofing compound complete all as specified.

M&L for applying three coats of white wash on ceiling incl preparation of new plastered surfaces complete all as specified.

M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion, white or tinted over 1 mm thick wall care putty complete. (Note: wall surface made smooth and application of distemper through Mechanical mean)

M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of cement base paint white or tinted complete. (Note wall surface made smooth and application of distemper through Mechanical mean)

M&L for brooming down plastered/unplastered old decorated surface of wall incl cornice etc and applying one coat of white wash complete all as specified and directed. (Note wall surface made smooth and application of distemper through Mechanical mean)

All as per item No 122 above but on ceiling

M&L for Preparation of old decorated surface of wall incl cornice etc and applying one coat of oil bound distemper in any colour complete all as specified and directed. (Note wall surface made smooth and application of distemper through Mechanical mean)

All as per item No 124 above but two coats of oil bound distemper in any colour on wall complete all as specified and directed.

M&L for complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, applying two coats of distemper, oil emulsion white or tinted over and including 1 mm thick wall care putty complete all as specified and directed. (Note wall surface made smooth and application of distemper through Mechanical mean)

All as per item No 126 above but on ceiling complete all as specified and directed.

M&L for preparation of old treated wooden surface of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified using mechnical mean

M&L for brooming down plastered/unplastered old decorated surface of walls and applying two coat of cement base paint complete all as specified using mechnical mean

M&L for Preparation of old decorated concrete/brick/stone or plastered surface of any description over 10 cm width or girth not otherwise described and applyhing one coat of synthetic enamel paint complete all as specified using mechnical mean

M&L for Preparing old decorated plastered or unplastered surfaces of wall including cornices, pilasters etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and treating oil and greasy spots and applying one coat of weather proof paint (Exterior emulsion paint) complete all as specified and directed. (Note: wall surface made smooth and application of weather proof paint through Mechanical mean)

M&L for preparation of old surfaces of wall any type applying two coat of exterior emulsion paint over 1 mm thick putty complete all as specified and directed. (Note: wall surface made smooth and application of exterior emulsion paint through Mechanical mean)

M&L for preparation of old surfaces of wall projection,face of chajja,projected face of roof slab and face and sides of sunshade etc by brooming down or steel wire brushing, scrapping down any type applying one coat of exterior emulsion paint complete all as specified and directed. (Note: wall surface made smooth and application of exterior emulsion paint through Mechanical mean)

M&L for complete removal of existing treatment and applying 1 mm thick wall care putty with two coat plastic emulsion paint complete all as specified and directed. (Note: wall surface made smooth and application of plastic emulsion paint through Mechanical mean)

M&L for preparation of existing old cement concrete surface applying one coat of whether proof coat (Exterior emulsion paint) complete all as specified and directed.on all exposed surface of concrete/plastered surface of RCC over head tank with staging, column, beam dome & tank ceiling dome area (RCC staging 12 mtr to 16 mtr height from ground level) etc complete all as specified and directed by mechnical mean

M&L for preparation of existing old plastered/ concrete surface of RCC over head tank with staging, column, beam dome & tank ceiling dome area (RCC staging 12 mtr to 16 mtr height from ground level) and applying two coat of whether proof coat (Exterior emulsion paint) complete all as specified and directed by mechnical mean

M&L for writing letters or figures (Block, Roman, Italic or Indian) not exceeding 30cm height complete all as specified and directed.

Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material.

M.R. ENTERPRISES (BID ID -3078917)

bharat construction (BID ID -3079509)