Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹66.1 LAccepted-AOC 25 13 1 AMBEGAON PATHAR PUNE 411046 | PUNE | MAHARASHTRA | 411046 | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹77.2 L+₹9.9 L (14.7%)Rejected-Finance | L2 | Rejected-Finance Other than being lowest | |
| 3 | L3₹79.7 L+₹12.4 L (18.4%)Rejected-Finance SHOP NO 10 BMC SHOPPING CENTRE MITHA NAGAR GOREGAON WEST MUMBAI 400 104 | MUMBAI | MUMBAI SUBURBAN | MAHARASHTRA | 400104 | L3 | Rejected-Finance Other than being lowest | |
| 4 | L4₹84.0 L+₹16.7 L (24.7%)Rejected-Finance | L4 | Rejected-Finance Other than being lowest | |
| 5 | L5₹87.0 L+₹19.6 L (29.1%)Rejected-Finance A 303 SHREE KRISHNA COMPLEX CO OP HSG SOC LTD WESTERN EXPRESS HIGHWAY OPP NATIONAL PARK BORIVALI E MUMBAI 400066 | MUMBAI SUBURBAN | MAHARASHTRA | 400066 | L5 | Rejected-Finance Other than being lowest |
Tender Value
Refer Docs
EMD Value
₹1.7 L
Closing Date
4 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (NW) Mumbai
Commander Works Engineer NW Dr Homi Bhabha Road Navy Nagar Colaba Mumbai 05
REPAIR MAINT OF MARINE INSTALLATION AT VARIOUS JETTY AT NAVAL DOCKYARD UNDER GE (NW) KUNJALI COLABA MUMBAI
2023_MES_607438_1
8561/CWE (NW) Mumbai/E8
Open Tender
Civil Works
Item Rate
180 days
GE (NW) Kunjali
Class C
7 documents required · 7 mandatory
₹1,000
Yes
GE (NW) Kunjali
₹1.7 L
Yes
23 Sept 2023
30 Jun 2023
7 Aug 2023
30 Jun 2023
4 Aug 2023
21 Jul 2023
30 Jun 2023 - 19 Jul 2023
Amount
Dismantling plain or corrugated steel sheeting, any gauge or thickness incl Nainital or similar pattern roof coverings complete all as specified and directed by Engineer-in-charge.
Dismantling of timber scantling 40 sq.cm and over in section in framed work, in any positon at any height etc complete all as specified and directed by Engineer-in-charge.
Dismantling wrought or mild steel work of any description complete all as specified and directed by Engineer-in-charge.
Supply & fixing mild steel Rolled section as in main and cross beams, hip and jack rafters; purlins, vertical post, plates, pipes where connected to common rafter and running rails and fixing with angle cleats or other connecting plates (Fe-410-W (Gde-E-250) quality -A, including necessary nut bolt, screw etc complete all as specified and directed by Engineer-in-charge.
Material & labour for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-charge.
Fixing only Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-charge.
Material & labour for Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-charge.
Material & labour for prepartion of new or previously untreated steel surfaces of any description over 10cm in width or girth not otherwise described and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed by Engineer-in-charge.
Material & labour for preparation of old painted surfaces of steel any description over 10 cms width or girth and applying one coat of synthetic enamel paint on steel surfaces complete all as specified and directed by Engineer-in-charge.
Taking down eaves gutters and rainwater pipes( any size or pattern) , including all fittings, heads, shoes, bends , swan necks, etc, removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed by Engineer-in-charge.
Supply & fixing 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed by Engineer-in-charge.
Supply & fixing 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed by Engineer-in-charge.
Supply & fixing for PVC (SWR) bends any radius 110mm bore complete all as specified and directed by Engineer-in-charge.
Supply & fixing for PVC (SWR) bends any radius 75mm bore complete all as specified and directed by Engineer-in-charge.
Material & labour for 100mm dia cast iron soil waste and vent pipes (sand cast pipes) in any length with or without ears with cement joints fixed to walls or laid in trenches etc complete all as specified and directed by Engineer-in-charge.
Material & labour for 75mm bore cast iron soil waste and vent pipes (sand cast pipes) in any length with or without ears with cement joints fixed to walls or laid in trenches etc complete all as specified and directed by Engineer-in-charge.
Supply & fixing CI bends 75 mm dia diminishing pieces or tapers (larger bore measured) fitted with oval access doors of following sizes complete all as specified and directed by Engineer-in-charge.
Supply & fixing CI bends 100 mm dia diminishing pieces or tapers (larger bore measured) fitted with oval access doors of complete all as specified and directed by Engineer-in-charge.
Demolition of Stone slabs and tiles/ Interlocking paver blocks of any description or thickness in floors, aprons laid, bedded and pointed in any mortar and removing and rubbish off the premises (outside MoD land) etc complete all as specified and directed by Engineer-in-charge.
Material & labour for 20-25mm thick, machine cut, Kota stone slab, as in floors, steps, landing etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of slab, including cutting, polishing etc. with and including 20mm thick screed bed in CM 1:4 complete all as specified and directed by Engineer-in-charge.
Material & labour for Hard wear stone (of any type) granite stone slab 20mm thick in flooring machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing and including 15mm thick screed bed in CM 1:4 complete all as specified and directed by Engineer-in-charge.
Material & labour for Hard wear stone 20mm thick (of any type) granite stone slab machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing and including 10 mm thick backing coat in CM 1:3 complete all as specified and directed by Engineer-in-charge.
Material & labour for machine pressed pre-cast concrete interlocking coloured paver block and shape and size conforming to IS-15658-2006 of 60mm thickness M-35 grade with grey cement and pigment over 50mm thick sand cushioning complete all as specified and directed by Engineer-in-charge.
Material & labour for PCC 75mm thick D-2 type (1:4:8), using 40 mm graded aggregate as in sub base complete all as specified and directed by Engineer-in-charge.
Taking down cement plaster or cement lime plaster on brick or stone walls etc including raking out joint, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-charge.
Material & labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth (with out using extra cement) including all safety and scaffolding complete all as specified and directed by Engineer-in-charge.
Material & labour for rendering 5mm thick in CM 1:3 on ceiling surface including all safety and scaffolding complete all as specified and directed by Engineer-in-charge.
Material & labour for rendering 20 mm thick on fair faces of brick/concrete surfaces with two coats i.e (15 mm thick backing coat in CM (1:6) and 5mm thick finishing coat in CM (1:4)) ,mixed with 3% integral water proofing compound as per manufacturers instructions, finished even and smooth without using extra cement including all safety and scaffolding complete all as specified and directed by Engineer-in-charge. (WPC Shall be measured and paid seperately)
Supply only integral water proofing compound complete all as specified and directed by Engineer-in-charge.
Material & labour for preparing new plastered surfaces of walls and applying two coats of oil bound distemper with priming plastered and other surfaces with alkali resistant primer with 3mm thick wall care putty on plastered surfaces complete all as specified and directed by Engineer-in-charge.
Material & labour for preparation of new plastered surface of ceiling and applying two coat of oil bound distemper on ceiling with alkali resistant primer including all safety and scaffolding complete all as specified and directed by Engineer-in-charge.
Material & labour for prepration of old plastered / decorated surfaces of walls and applying one coat of oil bound distemper on plastered/decorated wall surfaces complete all as specified and directed by Engineer-in-charge.
Material & labour for prepration of old plastered / decorated surfaces of walls and applying two coat of oil bound distemper on plastered/decorated wall surfaces complete all as specified and directed by Engineer-in-charge.
Material & labour for prepration of old plastered / decorated surfaces of walls and applying one coat of plastic emulsion paint on old plastered surfaces complete all as specified and directed by Engineer-in-charge.
Material & labour for new or previously untreated surfaces of any description & applying two coats of acrylic (antifungal) exterior grade paint of over one coat of primer on wall/roof at any height including scaffolding complete all as specified and directed by Engineer-in-charge.
Material & labour for preparation of old wall surfaces of any description & applying one coats of acrylic (antifungal) exterior grade paint on wall/roof including necessary scaffolding complete all as specified and directed by Engineer-in-charge.
Dismantling of wall and ceiling boards (fibre, pulp, insulation) or insulation boards, false ceiling, wall paneling & partition boards bonded wool, blanket slab incl aluminium grid frame work complete all as specified and directed by Engineer-in-charge.
Material & labour for Anodised aluminium snap grid frame work for false ceiling of grid size 605X605 mm with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm complete all as specified and directed by Engineer-in-charge.
Supply & fixing in repair solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification complete all as specified and directed by Engineer-in-charge.
Supply & fixing in repair hollow PVC wall paneling 6 to 8 mm thick colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification complete all as specified and directed by Engineer-in-charge.
Dismantling floor hearth or wall tiling, including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-charge.
Material & labour for Non skid coloured ceramic tiles 7 to 8 mm thick ( square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles with and including 15mm thick screed bed in CM 1:4 complete all as specified and directed by Engineer-in-charge.
Material & labour for Non skid coloured ceramic tiles 7 to 8 mm thick ( square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles with and including 15mm thick screed bed in CM 1:4 complete all as specified and directed by Engineer-in-charge.
Material & labour for Coloured glazed ceramic tiles in vertical surface 450 X 300 X 7 mm thick, set and jointed in neat cement paste and pointed in coloured cement to match the shade of the tiles with and including 10 mm thick backing coat in CM 1:3 complete all as specified and directed by Engineer-in-charge.
Supply, laying, connecting and testing GI Tubing 15mm dia , medium grade with all fittings and fixed complete to wall and ceiling or laid in floor complete including taking down of existing pipeline complete all as specified and directed by Engineer-in-charge.
Supply, laying, connecting and testing GI Tubing,20mm dia. medium grade with all fittings and fixed complete to wall and ceiling or laid in floor completeincluding taking down of existing pipeline complete all as specified and directed by Engineer-in-charge.
Supply & fixing Push type taps for urinals, cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15 mm dia iron pipe for brass ferrule and fixed in repairs complete all as specified and directed by Engineer-in-charge.
Supply & fixing in repairs fancy type angle Stop Cock valve chromium plated cast copper alloy 15mm bore with crutch or butter fly handle complete all as specified and directed by Engineer-in-charge.
Supply & fixing in repair for health faucet ( Jet) 1 m long PVC tube with wall hook chromium plated fitted to stopcock 15 mm bore complete all as specified and directed by Engineer-in-charge.
Supply & fixing white glazed earthen ware vitreous Oval type china wash hand basin of size 600x700 mm with and including CI brackets, with granite including 32mm bore brass CP waste coupling Inlet/ outlet PVC flexible pipe etc complete all as specified and directed by Engineer-in-charge.
Supply & fixing 32 mm thick flush shutter solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by Engineer-in-charge.
Supply & fixing in repair vitreous china urinal, half stall type complete including providing and fixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugs with and including 60 mm brass screws, pointing around urinal back in cement , flush pipes, inlet ,outlet etc complete all as specified and directed by Engineer-in-charge fixed in repairs.
Supply & fixing in repairs fancy type bib taps, chromium plated cast copper alloy 15mm bore with crutch or butter fly handle, screwed down, & fixed complete all as specified and directed by Engineer-in-charge.
Supply & fixing in repairs 32mm dia PVC waste pipe for WHB and urinals fixed in repairs complete all as specified and directed by Engineer-in-charge.
Supply & fixing white vitreous china washed down water closet pan, (pedestal pattern), white, with and including P/S Trap, PVC solid type seat cover, stainless steel hinging divice etc, fixed in repair complete all as specified and directed by Engineer-in-charge.
Supply & fixing fixed in repairs Wash hand basin vitreous china (flat back) size 550 x 400 mm including brackets for fixing purpose, waste brass chromium plated with long screwed shanks and fly nuts 32 mm size including bottle trap complete all as specified and directed by Engineer-in-charge.
Supply & fixing fancy type pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed in repairs of 15 mm bore pipe etc complete all as specified and directed by Engineer-in-charge.
Supply & fixing vitreous china water closet (Squatting pan) “Orissa” pattern of size 580 x 440 mm white with integral foot rest and ‘P’ trap (excluding flushing cistern) but including PVC flush pipe and provision of lime concrete bedding as fixed in repairs complete all as specified and directed by Engineer-in-charge.
Supply & fixing in repairs for 10 litre capacity PVC valveless syphonic action type flushing cistern high or low level (exclusive of brackets) white with inlet ball valve, float and handle inlcuidng brackets, PVC pipe for connecting with WC complete all as specified and directed by Engineer-in-charge.
Supply & fixing brass Chromium Plated towel rail, 20mm dia, D type , 60 cm long between flanges fixed in repairs complete all as specified and directed by Engineer-in-charge.
Supply & fixing in repairs for providing 15 mm dia PVC connection of length 450mm long complete all as specified and directed by Engineer-in-charge.
Erection & dismantling of MS tubular double scaffolding (H frames) upto height of 30 m & with necessary bracing, provision of necessary safety equipment to the skilled workers to carry out the work and covering with green cloth upto top of the scaffolding for carring out external facework of walls complete all as specified and directed by Engineer-in-charge.
Taking down chowkats or frame with shutter ( without taking off shutter from frame) , n exc 1.5 sqm each complete all as specified and directed by Engineer-in-charge.
Taking down chowkats or frame with shutter ( without taking off shutter from frame) exc 1.5 sqm but n exc 4 Sqm each complete all as specified and directed by Engineer-in-charge.
Supply & fixing 35mm thick second class hard wood, plain framed, panelled shutter of 9mm BWP comercial ply or 12mm veneered particle board with commercial veneering on both faces the size of rail land stile as per IS 1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and directed by Engineer-in-charge.
Supply & fixing Powder coated aluminium frame for doors, windows ventilators and partitions with one or more rebates including joining cleat for fixing etc complete all as specified and directed by Engineer-in-charge.
Material & labour for Sheet glass 4 mm thick, ordinary quality and glazing in aluminium beading with screws/ rebates in square exc 0.5 sq.m in each pane complete all as specified and directed by Engineer-in-charge.
Supply & fixing stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.4mm complete all as specified and directed by Engineer-in-charge.
Material & labour for aluminium anodized grill with suitable aluminium anodized frame of F/H section with suitable fixing screws/attachment etc complete all as per M/S Deco Grill Design No DG -102 , 7.5mm size grill i.e. made out of 75mm thick aluminium plate all as per manufacturer's specifications complete all as specified and directed by Engineer-in-charge.
Supply & fixing 100 mm Butt hinges, stainless steel, heavy duty, with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified and directed by Engineer-in-charge.
Supply & fixing Aluminium anodised sliding door bolt 300m long, with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy .
Supply & fixing aluminium anodised Barrel tower bolts of extruded section, length of bolt 200mm complete all as specified and directed by Engineer-in-charge.
Supply & fixing Extruded aluminium anodised alloy handles, fabricated type 200mm size complete all as specified and directed by Engineer-in-charge.
Supply & fixing aluminium (Die cast) body, door closer, hydraulically regulated, desig. No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed by Engineer-in-charge.
Material & labour for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as per manufacturer's instruction complete all as specified and directed by Engineer-in-charge.
Demolition of brick work or stone /boulder masonry built in cement mortar, including all quoins, arches, pillars, complete all as specified and directed by Engineer-in-charge.
Material & labour for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed by Engineer-in-charge.
Ditto all as per item no above but half brick thick wall built in CM 1:4 complete all as specified and directed by Engineer-in-charge.
Supply & fixing for 1st class hard wood plain, solid, straight chowkats and frames, coping of jetty, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed by Engineer-in-charge.
Material & labour for solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers instruction complete all as specified and directed by Engineer-in-charge.
Supply & fixing for Toughned glass 10mm thick, as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes as required complete all as specified and directed by Engineer-in-charge.
Supply & fixing 4mm thick bakelite with decorative choice laminated on both sides complete all as specified and directed by Engineer-in-charge.
Supply & fixing in repairs prelaminated 12mm thick particle board exterior grade prelaminated both sides with decorative choice lamination fixed with screws to timber/ metal frame work complete all as specified and directed by Engineer-in-charge.
Supply & fixing Mortice lock, 4 lever vertical type, size 100mm mild steel complete all as specified and directed by Engineer-in-charge.
Supply & fixing 3 mm thick aluminium composite panel plain of approved colour shade as required cutting, notching bending to shape and jointing including aluminium tubular section as required of size 25 x 25 x 1.4mm Thick etc. as in vertical/flat surface of wall including making holes for light fixing etc complete all as specified and directed by Engineer-in-charge.
Supply & fixing welded steel wire fabric to wood or steel members., cut to length, fixed to steel members/ reinforcement steel, weighing per Sqm n exc. 4 Kg.s complete including two coat of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.
Demolition of reinforced cement concrete of any description and in any position not other wise spcifically provided for complete all as specified and directed by Engineer-in-charge.
Material & labour for RCC Type B1 1:2:4 using 20 mm graded stone aggregate slab supported on wall, beam and coulumn, roof, landings, balconies, canopies, deck slabs and in shelves and the like including all necessary form work complete all as specified and directed by Engineer-in-charge.
Material & labour for TMT mild steel bars,10 mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engineer-in-charge.
Diito all as per item above but as in stirrups 6 to 8 mm dia complete all as specified and directed by Engineer-in-charge.
Material & labour for preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed by Engineer-in-charge.
Material & labour for preparation of old painted surfaces of wood or wood based surfaces over 10 cms width or girth and applying one finishing coat of synthetic enamel paint on wooden surfaces complete all as specified and directed by Engineer-in-charge.
Removing building/demolished material/debris to a distance exc. 5 km but n exc. 25 km and depositing outside MoD land complete all as specified and directed by Engineer-in-charge.
Material and labour for preparation and applying two coat of indigo paint on Chequered tiles/Interlocking paver blocks/roof tiles Manglore pattern/CGI sheet on roof, etc complete all as specified and directed by Engineer -in-charge.
Supply & fixing factory made single extruded WPC (wood polymer composite) solid door/window/ceosetory windows & other frames/chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers(wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mitred joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum density of 750 Kg/Cum and screw withdrawal strength of 2200 N (face) & 1100 N (Edge) minimum compressive strength of 58 N/Sqcm and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/ss dash fasteners of required dia and length complete all as specified and directed by Engineer-in-charge.
Supply & fixing factory made single extruded WPC (wood polymer composite) solid plain flush door shutter of 30mm thickness comprising of virgin polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/Cum and screw withdrawal strength of 1800 N/sqmm and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws complete all as specified and directed by Engineer-in-charge.
Disconnecting existing water tanks, exc 1000 ltrs but n. Exc 5000 ltrs setting aside (or lowering if required) for repair etc and hoisting reconnecting and refixing in position complete all as specified and directed by Engineer-in-charge. ( cleaing/repairing measured separately )
Demolition of Brick tiles, concrete tiles or terracing tiles of any type of tiles, single layer on roofs complete all as specified and directed by Engineer-in-charge.
Complete removal of existing water proofing treatment of any description in any position including cleaning, wire brushing, watering, removal of debris upto 1500 mtr distance complete all as specified and directed by Engineer-in-charge.
Material & labour for brushing neat cement slurry with 3.0 kg of cement per Sqm on cleaned and washed concrete surfaces and like complete all as specified and directed by Engineer-in-charge.
Material & labour PCC (1:2:4) type B-1 (Using 20mm graded stone aggregate) as in roof/chajja padding for maintaining roof/chajja slope complete all as specified and directed by Engineer-in-charge.
Supply & fixing in repairs 2000 Litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed by Engineer-in-charge.
Material & labour for providing water proofing treatment with five layered 4mm thick APP (Atactic Poly propylene) modified bituminous membrane re-inforced with no woven polyester mat of weight 180 gms/Sqm as centre core and without multiple layers of polythene finished on top and bottom with 7 micron thick flammable polythylene applied by thermo fusion using LPG torch on bottom portion of the membrane after applying a coat of bituminous primer @ 0.25 Kg/Sqm over roof and over the APP membrane provided a polypropylene/ polyester, Non woven geotextile fabric of 150 gsm over the geo textile fabric (An overlap of 100mm & 150mm shall be provided on sides ends respectively) etc complete all as specified and directed by Engineer-in-charge.
Material & labour for rendering 20mm thick cement plaster in CM (1:3) on roof top surface finished even and fair including WPC by weight of 3% of total cement concrete complete all as specified and directed by Engineer-in-charge.. Note : WPC will be measuerd separately.
Material & labour for cement concrete tiles 30cm x 30cm x 22 mm thick, machine pressed, (with grey cement & pigments) set jointed and pointed in neat cement slurry in floors over and including 15mm thick bedding layers in CM 1:3 complete all as specified and directed by Engineer-in-charge.
Material & labour for Cement concrete 25 mm thick type B1 1:2:4 (20 mm graded aggregate) as in flooring complete all as specified and directed by Engineer-in-charge.
Supply & fixing mild steel framed work in doors or gates of angle or other section with gusset plates, rails, braces, etc, of grade Fe 410-W ( Gde E-250 ) quality A complete drilling for fixing of steel sheeting or other covering . Doors, etc to be prepared by hanging and sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering , running, rails & guide) and hanging also fastening and fixing complete all as specified and directed by Engineer-in-charge.
Demolition of plain cement concrete of any description and in any position not other wise speifically provided for complete all as specified and directed by Engineer-in-charge.
Material and labour for ready mix cement concrete in Pavement/Hard standing (PQC) M-40 of flexural strength of 40Kg/Square in field using minimum 400 Kg of cement per cubic metre laid in bays or as directed with and including steel formwork to sides of concrete spread, compacted and finished in a continuous operation etc complete all as specified and directed by Engineer-in-charge.
Material & labour for PCC 1:2:4 type B2 using (40mm graded stone aggregate) as in foundations, fillings & mass concrete etc complete all as specified and directed by Engineer-in-charge. (Rate inclusive of necessary formwork and suitable arrangements )
Material and labour for taking down , chipping and removing the loose, splIt, damaged cement concrete, cement mortor surfaces of RCC Columns, beams, walls, chajjah etc and exposing the reinforced cement , wire brushing and cleaning the exposed steel reinforced bar, applying rust remover over the cleaned re-bar surface wash the re-bar with clean water for removing all rusts from the old re-bar surfaces, fixing new reinforcement for strengthen the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified bond coat on affected concrete surfaces and finally providing polymer modified cement and quartz sand mortor in CM (1:3) mix, 40mm thk in two coats, using polymer @ 15% by weight of cement complete all as specified and directed by Engineer-in-charge.
Material & labour for rendering 20 mm thick pre polymer modified ready mixed cement based plaster in two coats 12 mm thick base coat and 8 mm thick finishing/ final coat. Polymer modified ready mixed cement based plaster should having minimum composition of cement & sand 1:4 using fully treated dry, well graded natural sand conforming to IS-383 suitable for external plastering having low rebound properties, low water demand for curing properties, mechnical mixing with water in a metallic tray only to made good, consistency as per the specification of the manufacturer and applied over exterior masonry and concrete surfaces complete all as specified and directed by Engineer-in-charge.
Supply and applying microconcrete of Fosroc, Dr Fixit, or equivalent around edges of Dock walls, jetties, corners, grooves, alters, steps, piers and other marine structure after complete cleaning of concrete/stone surface and applying epoxy coat as bonding agent Fosroc's Nitobond or equivalent for bonding between old and new surface, including all lifts, shuttering all as required as per site condition complete all as specified and directed by Engineer-in-charge.
Supply & fixing in repairs 1000 Litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed by Engineer-in-charge.
Material & labour for preparation of RCC/PCC roof structure and applying evenly a coat of cold bituminous at 1 Kg per Sqm and applying seating cloth over cold bituminous , finaly paving bitumen of any penetration at 1.8 Kg per Sqm complete all as specified and directed by Engineer-in-charge.
SUNRISE CONSTRUCTION CO
Shree Ayyappa Engineering
jalandhara construction
Nilesh Construction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .