SPECIAL REPAIR TO PERIMETER FENCING

Amount

Material & Labour for taking out concrete posts or struts ( wood, RCC or steel) any size including taking down embedded portion and making good disturbed ground to facilitate provision of embedding of new post complete all as specified & directed by Engr-in-charge.

Material and Labour for providing Cement concrete (1:3:6) type C2 (using 40mm stone graded aggregate) as in foundation filling and mass concrete and for embedding posts (including caps and bases) all as specified and directed.

Material and Labour hand rails, half round of other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters runnings bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc, wind ties for roof including securing boltsposts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc : flat iron fillets (for securing wire mesh etc) including all necessary drilling bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165 as directed and fixed.

Dismantling fencing wire mesh, any type complete all as specified and as directed.

Supply and fixing Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed, (each line wire to be measured) complete all as specified and as directed.

Supply and fixing Razor concertina coil fencing with punched tape concertina coil 600mm dia 10 metre openable length having 50 nos rounds per 6 metre length, upto 3 m height of poll with existing angle iron 'Y' shaped placed 2.4m or 3.00m apart and with 9 horizontal R.B.T reinforced barbed wire, stud tied with G.I clips to retain horizontal, including necessary bolts or G.I barbed wire tied to angle iron, with reinforced barbed tape (R.B.T)/Spring core (2.5mm thick) wire of high tensile strength of 165 Kg/sq.mm with tape (0.52 mm thick) and weight 43.478 gm/metre complete all as per direction of Engineer-in-Charge.

Material and labour for preparation of new steel & iron surfaces of any description, exceeding 10 cm in width or girth and applying Two coats of synthetic enamel paint over & including a coat of red oxide primer complete all as specified and as directed.

Neelkanth Engineers

M/s DATAAR BUILDERS

HARISH SALES CORPORATION