Civil and carpentry works in CCE room nos. 305,307,315

Amount

Removing existing false ceiling of any material and any size with all necessary allied works, removing out debris out of ACTREC premises as directed by Engg-incharge.

Providing and fixing tiled false ceiling of approved materials of size 595x595 mm [Armstrong make] in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections with appearance of groove ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of Aluminum sheet having electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.

Providing and Applying and Levelling the existing surface with Birla White Cement based / Coloured waterproof Putti of average thickness of 1 mm or 2 mm of approved thickness, brand and manufacture, over the plastered wall surface to prepare the surface even and smooth ready for painting purpose etc complete ( Rate inclusive of Scaffolding Matetrial, Labour Charges) Etc.

Providing & Applying one coats of primer & thereafter two coats of lustre paint as mentioned below of approved make First quality Asian Paints (Apcolite) / Goodlass Nerolac/ ICI to the required colour scheme and as per manufacturers instructions / specifications to the walls, beams, columns, ceilings, partitions doors etc. including thoroughly scrapping the existing surface with sand papers, removing old paint, filling up crevices and Applying and Levelling the existing surface with Birla White Cement based / Coloured waterproof Putti/POP Coat of average thickness of 1 mm or 2 mm as per requirements of approved brands necessary to obtain smooth surface, filling of cracks, removal of stains, painting spots on floors,aluminium window frame & glass etc including scaffolding etc as to the entire satisfaction of EIC.

Providing and fixing sun control films 1.5 mm thick garware film on window glasess without damaging rubber gaskets, handle , friction hinged etc complete including neccesary scafolding job is to be complited as per garware film specification and as directed by EIC

Providing & fixing door shutter below existing granite counter or over head cabinet made out of 19mm thick commercial ply with 6mm thick. T.W.lipping patti front side laminated with 1.5mm approved colour & make all around the door shutter outlet face approved make and colour, laminated area should be two coat Sqm 1961 of french polish including necessary fittings like hinges, door handles, screws and Godrej make multipurpose lock, C type powder coated handle, tower bolt, ball catches etc. complete. all as specified & directed by Engineer-In-Charge.

Providing 15mm dia C.P. brass fancy Elbow action pillar tap.Jaquar make cat Nos. 5031 weighing not less than 600 gm RMC approved make (latest) and conforming to IS 781-1977 and fixing with pipe line including cost of jointing materials and pressure of 10 Kg/cm2 and rectifying the leaky joints if any complete as specified & directed for the following. (Work includes removing old fittings and handing over the same)

Providing & fixing anodized alumimium partition to the required height partly glazed and partly panneled using aluminium section of jindal 2425 satin finish anodizing of required size for bottom, top, middle & vertical rails at required intervals panneling with 12mm thick Nova pan or ancholam both side pre-laminatd board fixed with sloping aluminium beeding alround with neoprine gasket glazing with 5.5mm frosted/ bajri/ plain glass of approved make like M/s.Triveni, Shri.Vallabh/J/A/G pilkinten fixed with alumimium channel beeding two way PVC lining/ rubber gasket to ensure water tightness and Nos rattaling including providinG necessary cover mould using suitable alumimium section so as to take care of gaps between the walls/ ceiling / flooring and partitions etc. including providing and fixing necessary fittings as specified and directed.

Providing and fixing anodized aluminium sliding door consisting of partly glazed partly panneled with using 5.5mm thick glass sheet of approved make and quality plain/ forsted / bajri glass of approved make M/S. Triveni/Shri. Vallabh/J/A/J pilkinten fixed with aluminium slopping channel beeding with two nay PVC lining/rubber gasket to ensure water tightness and Nos rattaling and panneling with 12mm thick Nosva pan or ancholam board prelaminated on both side as required 15 section, guiding rail section 2635, vertical rails section 4506 including providing PVC Guidrails of six 12mm x75mm as required at size concealed type locking arrangement with Laxmi of Gold make lock and heavy duty handle set as per requirement including providing & fixing pelmet of 18mm thick commercial ply of kitply/Mysor/Century/Anchor make with approved laminate of 1.5mm thick and teak wood lipping patti and Nosn-laminated surfaces should be polished with approved french polish at required shade & colour.

REMOVING DOORS & WINDOWS: Labour charges only for carefully removing and takingout existing steel, wooden doors/wooden partition/windows/clearstory window shutters from its existing position at all floors levels and locations including chiseling around the frame hold fasts carting away debris making good the chiseled surface suitably as per the site requirement and shifting the at dismantled materials to the directed place with stacking in proper order including removing the existing fittings fixtures locking arrangmeent and returning the same to the Department of respective maintenance unit etc. complete all as directed by theEngineer-in-Charge.

Providing making erecting wooden partitions fully panneled to required height. with teak wood frame of 50mmx50mm in 600mm sq. panel or as required at site the wooden panneling with 6mm commercial plywood of approved make and quality on both sides of partition with 6mm groove teak wood 30mmx12mm beading on both sides to the required shape skirting at bottom on both the sides to required shape and skirting at bottom on both sides with 125mm x 12mm teak wood and top patti with 125 x 20mm T.W.to required flap/or as filler between the wall/ceiling/flooring and partition as specified and directed.

Providing & fixing 1.5mm thick approved laminate of requiredcolour over existing surfaces along with the adhesive all as required specification design etc. complete as specified and directed by Engineer-In-Charge.

REMOVING PARTITION WORK: Labour charges only for carefully removing and taking out existing wooden partitions (partly glazed, partly panneled or fully panneled with shutters glazing etc. at all floor level s and locations including removing the existing mongery fittings fixtures locking arrangement and handling over the same to T.M.C all complete as directed by Engineer-In-Charge.

Removing & refixing wooden door shutters with necessary modification or adding required available members glasses & changing available fittings like heavy duty Brass/S.S.hinges aldrop heavy duty, tower bolts as required etc. complete.

TEAK WOOD DOOR FRAME : Providing wood work with C.P. teak wood in frames for doors, windows, ventilators, Air-condition frames,clear story window, false ceiling and partitions etc.wrought framed and fixed in position including applying one coat of approved wood primer to the exposed surfaces and two coats of bitumastic paint to the surface of wood in contact with masonry/concrete etc.complete.

Demolishing existing damaged/cracked brick masonry with cement mortar and plaster at all floors and levels including scaffolding stacking of serviceable materials without damaging the adjacent masonry/RCC structure sanitary fittings & fixtures and disposal of unserviceable material carting away the debris out of hospital premises complete all as directed by the Engineer-in-Charge.

Cement Plastering of 20mm thick for internal wall and ceiling with cement mortar 1:4 finished smooth with neeru over brick walls of concrete surfaces including hacking the concrete surfaces at all floors and levels in quantities as required at site including scaffolding curing, etc. complete all as directed by Engineer-in-Charge.

Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut GRANITE for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.

Providing & fixing in position heavy pattern screw down gun metal 15mm NB female ball valve G.G.leader make conforming to IS:778with hand wheels at top including testing for 10kg /sq pressure with clean & potable water with a minimum testing duration of two hours etc. and rectification of leak ifany all as per specification and directedby Engineer-In-Charge.

Supply of labour carpenter on daily wages in ACTREC premises as per requirement basis