Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.6 LAccepted-AOC MIG 444 AWADHPURI COLONY AMANATGANJ AYODHYA 224001 | AYODHYA | AYODHYA | UTTAR PRADESH | 224001 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹8.0 L+₹10,690 (1.36%)Rejected-Finance | L2 | Rejected-Finance Not Being L1 | |
| 3 | L3₹8.0 L+₹11,810 (1.51%)Rejected-Finance D 65 423 C 1 RANA NAGAR COLONY GATE NO 4 LAHARTARA VARANASI UP PIN 221106 | VARANASI | VARANASI | UTTAR PRADESH | 221106 | L3 | Rejected-Finance Not Being L1 | |
| 4 | L4₹8.2 L+₹34,175 (4.36%)Rejected-Finance H NO 2 16 35 BEGUMGANJ GARHAIYA NEAR RADIO STATION AYODHYA UP PIN 224001 | AYODHYA | AYODHYA | UTTAR PRADESH | 224001 | L4 | Rejected-Finance Not Being L1 | |
| 5 | L5₹8.3 L+₹41,459 (5.29%)Rejected-Finance FLAT NO 03 MALTI NIWAS AVADH VIHAR COLONY MANDAKNI BLOCK BEHIND RAILWAY STATION DISTRICT AYODHYA 224001 UP | AYODHYA | AYODHYA | UP | 224001 | L5 | Rejected-Finance Not Being L1 |
Tender Value
₹10 L
EMD Value
₹20,000
Closing Date
2 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) Ayodhya Cantt
AGE (I) (MES) Ayodhya Cantt PIN-224001
REPAIR TO CERTAIN TOILETS AND KITCHENS ETC IN ZONE A AND B AREA UNDER AGE (I) AYODHYA CANTT
2023_MES_631404_1
8391/E8
Open Tender
Civil Works
Item Rate
120 days
Ayodhya Cantt
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
AGE (AI) Ayodhya Cantt
₹20,000
Yes
19 Jan 2024
6 Dec 2023
4 Jan 2024
6 Dec 2023
2 Jan 2024
20 Dec 2023
Amount
Taking down old chowkhats or frames with shutters (without taking off shutters from the frame) n.exc 1.5 Sqm each complete all as specified and directed.
S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, fixed in opening as per specification and drawing complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the styles and rails with suitable PVC sheet beading and joined together with solvent cement, supply and fixing in the frame at site as per specification and drawing complete all as specified and directed.
Taking down cement of cement lime plaster from brick walls including raking out joints, hacking for key, scrubbing down with water to receive plaster and rubbish off the premises complete all as specified and directed.
M&L for 15mm thick rendering in cement mortar (1:4) on other than fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.
M&L for 15mm thick rendering in cement mortar (1:6) on other than fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.
M&L for preparing newly plastered or previously untreated surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whiting primer complete all as specified and directed.
M&L for preparing newly plastered surfaces of walls and applying two coats of cement based paint over a coat of cement primer complete all as specified and directed.
M&L for 5 mm thick rendering on fair faces of concrete surfaces of ceiling in cement mortar (1:3), finished fair and even and applying a layer of 1mm thick wall care putty complete all as specified and directed.
S&F 150 mm long Aluminium, anodised, barrel tower bolt of extruded section complete all as specified and directed.
S&F 100 mm long stainless steell butt hinge, fixed to chowkhat complete all as specified and directed.
S&F 150mm aluminum anodised handle, cast type, anodised and fixed complete all as specified and directed.
Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubish off the premises complete all as specified and directed.
M&L for 15mm thick screed bed or bedding layer in cement mortar (1:6) for laying further floor finises of tiles etc complete all as specified and directed.
M&L for 10mm thick rendering in cement mortar (1:4) on fair faces of walls for fixing of wall tiles complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7mm to 8mm thick (Square/ rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, laid in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
All as per Srl item No. 16.00 above but in patches n.exc 3.00 sqm each
M&L for glazed ceremic coloured tiled of size 350x250x7mm / 450x350x7mm thick in vertical surfaces, set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed by the Engr-in-Charge.
All as per Srl item No. 18.00 above but in patches n.exc 3.00 sqm each
S&F in repairs, stainless steel sink with drainage board of overall size 915 mm x460mm bowl size 410mx330mmx160mm, made of 1mm thick stainless steel sheet with plug, washers and wastes including bedding in cement mortar to dwarf wall or fixing M S cantilever brackets and connecting union to pipe, complete all as specified and as directed
S&F in repairs, stainless plate rack of size 750mmx900mm, fixed to wall with rowl plugs & screws of suitable size or fasterners including taking down of old damaged plate rack of any pattern, complete all as specified and as directed by Engr-in-Charge.
Dismantling/demolition or breaking up drain pipes of 100mm dia PVC (SWR), Salt glazed stone ware or AC pipes, set in cement mortar, laid in floors or fixed to walls with clamps complete all as directed.
All as per Srl item No. 23.00 above 75mm dia PVC (SWR), Salt glazed stone ware or AC pipes,
S&F 110mm dia bore PVC (SWR) pipes, single socketed, fixed to walls in any length with rubber ring joints including all fittings and clamps etc complete all as specified and directed.
S&F 110mm dia bore PVC (SWR) bends of any radius complete all as specified and directed.
S&F 75mm dia bore PVC (SWR) pipes, single socketed, fixed to walls in any length with rubber ring joints including all fittings and clamps etc complete all as specified and directed.
S&F 75mm dia bore PVC (SWR) bends of any radius complete all as specified and directed.
S&F in repairs, 15mm dia bore bib tap cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F in repairs, Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.00 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.
S&F in repairs, 15mm dia bore angle / stop valve, cast copper alloy, screwed down, high pressure with crutch of butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.
S&F in repairs, 15mm dia bore pillar tap cast copper alloy, fancy type, chromium plated with capstan head, screwed down, high pressure with or without lettered 'Hot or Cold' with long screwed shank and fly nut, screwed for iron pipe or PVC connection complete all as specified and directed.
S&F in repairs, 15mm dia bore 600mm long PVC connection with PTMT nuts at both ends complete all as specified and as directed.
S&F in repairs, vitreous china wash hand basin, white, flat back, size 450 X 300 mm excluding taps, wash, chain and plug and procelain stopper but including brackets cutting for pinning in ends of brackets or erecting stand and 32mm dia waste coupling and waste pipe (half or full thread) (min weight 32mm-45 gms) complete all as specified and directed.
S&F in repairs, vitreous china wash down water closet pan (pedestal pattern), white (excluding flush pipe, flushing cistern), including connection to trap and drain and flushing pipe anti-syphonage pipe, flushing cistern etc, complete all as specified and directed.
S&F in repairs, plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel CP or aluminium hinging device complete all as specified and directed by Engr-in-charge.
S&F in repairs, 10 ltrs PVC valveless, syphonic action type flushing cistern, low level, white with inlet, ball valve, float and handle including brackets complete all as specified and directed.
S&F in repairs, 20mm dia brass chromium plated tubular towel rail, 'D' type, 60 cm long between flanges, fixed to wall with wooden gutties / PVC rawl plugs and screws of suitable size complete all as specified and directed.
S&F in repairs, vitreous china urinal half stall type, white with and including 32/40mm dia 90 cm long PVC waste down pipe complete all as specified and directed by Engr-in-Charge.
S&F in repairs, urinal spreader of PTMT (minimum weight 60 gms) of any colour for fixing with 15mm dia pipe complete all as specified and directed.
Taking up or down 15 mm dia bore steel tubing and conncection including cleaning for re-fixing or removal to store, complete all as specified and as directed.
Taking up or down 20 mm dia bore steel tubing and conncection including cleaning for re-fixing or removal to store, complete all as specified and as directed.
S&F 15 mm dia bore galvanized iron tubing, medium grade with all fittings and fixed to walls and ceiling or laid in floor complete all as specified and directed by Engr-in-Charge.
S&F 20 mm dia bore galvanized iron tubing, medium grade with all fittings and fixed to walls and ceiling or laid in floor complete all as specified and directed by Engr-in-Charge.
S&F in repairs, 20mm bore ball valves high pressure of PTMT (min weight -210 gms) with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe complete all as specified and directed.
Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc, laid, bedded and pointed in any mortar complete all as specified and directed.
M&L for 18 to 20mm thick granite stone slab of any type including cutting, grainding, moulding in round edge in stone slab, outer edges grinded in semi circular shape and finally polished to match the top surface and fixed in steps, jambs, pillars, window- cills, cooking platforms and the like, set in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete as approved by Engr-in-charge.
S&F in repairs, 4mm thick figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 Sqm in each pane complete all as specified and directed.
S&F in repairs, stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aoerture 1.40 mm, fixed with stainless steel staples, complete all as specified and directed by Engr-in-Charge.
S&F powder coated anodised aluminium window/ventilator shutter sliding type with stylies, rails of size 40mmx20mm, frame for chowkat of size 30mm x 90mm, fixed glazing, all are made from aluminium anodised section including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws of suitable size with and including4mm thick frosted glass / tinted glass complete all as specified and directed. Note : (i) Two Nos of track to be provided. (ii) In two tracks, shutter with frosted glass / tinted glass shall be provided.
S&F 75mm dia PVC floor trap with grating including jointing to waste pipe and fixed in position in cement concrete (1:2:4) type B1 complete all as specified and directed.
Dismantling boarding of any description and fixed in any position with nails / screws to any type of frame work complete all as specified and directed.
S&F 18mm thick PVC sheet minimum 600 Kg density grade-I quality of both sides plain white colour rigid and glossy finish, fixed with screws, solvent cement / adhesive as per manufacturer's instructions to make kitchen cabinate / cupboard sides, top and bottom and shelves inside complete all as specified and directed by Engr-in-Charge. Note : Kitchen Cabinet / Cupboard accessories such as hinges, handles, etc shall be measured and paid for separately.
S&F 18mm thick PVC sheet minimum 600 Kg density grade-I quality of one side decorative lamination and other side plain white colour to make kitchen cabinet / drawer/ cupborad shutters, fixed with screws, solvent cement / adhesive as per manufacturer's instructions complete all as specified and directed by Engr-in-Charge. Note : (i) Kitchen Cabinet / Cupboard accessories such as hinges, handles, etc shall be measured and paid for separately. (ii) Colour & design of prelaminated board shall be approved by AGE (I).
S&F auto closing hydraulic (soft closing) chrome finish stainless steel hinge, openable at 110 degree and fixed with SS screws complete all as specified and directed by Engr-in-Charge.
S&F 100mm long stainless steel (Gde -304) handle, fancy type, polished bright chrome finish and fixed with SS screws complete all as specified and directed by Engr-in-Charge.
S&F in repairs, 4mm thick non-asbestos fiber cement building boards, fixed or laid / inserted to timber / GI / Aluminium frame work with screws complete all as specified and directed by Engr-in-Charge.
Saket Traders
R K BROTHERS
SAI RAM ASSOCIOATES
K R KAUSHAL AND SONS
Jairajyadav security services
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .