ETNo-13/EDC-1/MT/2026-27

Safe Carriage of new 33KV/11KV/0.4KV CT/PT unit from store centre,Meerut /JE to site & returned old damage 33KV/11KV/0.4 KV CT/PT unit from site to store centre including the cost of labour for loading &unloading at both ends maximum distance up to 100 Km :- Loading/Unloading and installaion of CT/PT unit by mounting of CT/PT metering unit on the Double Pole Structure and connecting all the connections of HT/LT cable with unit by Connecting clamps of incoming and jumpring of outgoing system with conductor (insulated/bare). cost includes all material (other then CT/PT unit, meter box, insulator, pipe, conductor for jumpering), complete installation on Double Pole structure (with material) if required, T&P, labour etc required for proper complition of work. Note-1- 33KV/11KV/0.4 KV CT/PT unit, meter box, pipe, insulators and conductor(insulated/bare) for jumpering, etc shall be provided by the NIgam/dept. 2- Old damaged CT/PT Unit and other material will be returned back to Store under the supervision of concerned JE in contractor scope. Division Name No of Quantity EDD-Partapur, Meerut. - 25 Nos .EDD-Pallavpuram , Meerut. - 27 Nos. EDD-Kithore, Meerut - 44 Nos.

33 KV Lightening arrestor (EDD-Partapur=36, EDD-Kithore=35)

BATTERY CHARGER WITH BATTERY 24 volt (EDD-Partapur=07, EDD-Kithore=05)

Installation of BATTERY CHARGER WITH BATTERY 24 volt (EDD-Partapur=07, EDD-Kithore=05)

Installation of 33 KV Lightening arrestor (as per UPPCL Respo) (EDD-Partapur=36, EDD-Kithore=35)

(i) Current rating: 1A/5A Site Selectable. (ii) Aux Supply: 180-240V AC +24V DC Rated (As per IEC) with Communicable Port. (iii) Draw Out with CT Shorting. (iv) Front LEDs Display for following:- L1, L2, L3, E, Trip for Faulty Phase/Earth, Low Set Trip, High Set Trip. (v) Relay should have minimum 4 DI, 6 DO. (vii) The relay should have Cold Load pick up, Harmonic Blocking and CBFP. It should have minimum 10 Fault records and 10 Events records. a lp>5 to 400% in step of 1%. b lp>5 to 3000% in step of 1%. c le>5 to 250% in step of 1%. d le>5 to 1500% in step of 1%. e Te>0.02 Sec to 20 sec in step of 0.01 Sec. f Ti>0.02 Sec to 20 sec in step of 0.01 Sec. Note:- Breaker Failure Detectiion. Communication Ports: RS485/RS232. Communication Protocols: MODBUS-RTU&IEC 60870-5-103. Programming through local keypad. Selectable definite Time or IDMT curves as per IEC standards. Rated input current selectable 1A or 5A. Password protection to guard against unauthorized access & editing of setting. Storage of latest 10 fault records with time stamping. Mounting/Case:Draw-out/Non Draw-out. Trip Circuit Supervision through digital input. (EDD-Partapur=20, EDD-Pallvpuram=22, EDD-Kithore=47)

Providing and Commissioning of Master Trip relay in Power T/f at various 33/11 kv Sub station. (EDD-Partapur=20, EDD-Pallavpuram=22, EDD-Kithore=47)