Proposed Renovation of chamber at JIADA Adityapur Region Jamshedpu

Amount

Dismantling pucca brick or lime work including stacking serviceable materials in countable stacks within 15M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/l.

Providing designation 75 A brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to2.5 including providing 10 mm thick mortar joints cost of screening materials , scafolding , raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/l.

Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Taking down old door and window shutters including stacking serviceable materials within 15M. lead and disposal of unserviceable materials with all leads all complete as per direciton of E/l.

Taking down Choukhat in door and window shutters including stacking servicable magerials with 15,lead and disposal of unserviceable materils with all leads all comp;lete as per direction of E/I

Taking down ceiling of any type and refixing them after repair with departmental material within 15M lead and disposal of unserviceable materials with all leads all complete as per direction of E/l.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.15.23.1 For thickness of tiles 10 mm to 25 mm

Providing and fixing 1st quality ceramic galazed wall tiles conforming to IS:15622 (thinkness to be speicified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green,black of any size as approved by Engineer-in-charge in skirting, risers of steps abd dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigments etc., complete.

Providing and laying double charged vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less then 0.08% and conforming to IS:15633/ISO 13006 of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 Coarse sand, jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and mataching pigments etc. complete size of titles 600 x 600 mm.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate GI. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to GI. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with 12.5 mm thick tapered edge gypsum fire resistant board conforming to IS: 2095- Part I

Supplying, fitting and fixing all height wall paneling with 12 mm plywood (green/optima/Red) over 2"x1" aluminum section, 6mm thick waterproof veener and polish finish with all taxes and royality all complete as per E/I

Suppling, fitting and fixing good quality, well dressed and well seasoned sal wood work in chaukhat in doors, windows, skylight, fanlights and celetial windows openings, including wedge over clamps all complete including application of two coats of wood preservative of approved quality on the surface butting walls and lintels all complete as per building specification and direction of E/l

Supplying, fitting and fixing 35mm thick solid core type decorative single leaf flush door shutter with both sides decorative veneered with black board core bended with high quality phenol formal dehydes synthetic resin of standard make with Aluminium fittings such as hinges, tower bolts, handle, cleats and sand blocks and taxes all complete as per building specification and direction of E/l.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness

Providing french spirit polishing over new wooden surface to give desired texture and gloss with approved make and shade of ready mixed french polish including preparing the surface after cleaning, removing dirt, scales, grease and sand papering, including cost of scaffolding and taxes all complete as per building specfication and direction of E/l.

Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing rust , dirt, , scales , smokes and grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/l. ( Mode of measurement Area shall be multiplied by the co-efficient as indicated in building specification)

Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direciton of E/l.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/l.

Supply fitting fixing roller blinds mechanism for existing window including required materials and labours as per Building specification and direction of E/I

Carriage of Materials i) Sand

ii) Brick

Wiring for light point/fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit,with modular types switch,modular plate,suitable size G.I. box etc.as required. GR-C

Supplying and fixing suitable size G.I. box with Modular plate and cover in front on surface or in reces including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amp modular switch connection,painting etc. as required.

Supplying and fixing suitable size G.I. box with Modular plate and cover in front on surface or in reces including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amp modular switch connection,painting etc. as required.

Supply and fixing of 20A 240V, SPN insustrial type socket outlet with 2 poles and earth, metal enclosed metal top along with 20 amps "C" series, SP MCCB, in sheet steel enclouser on surface or in racees with chained metal cover for socket out let and complete with connections, testing and commissioning etc as required.

Wiring fo light/ power plug 2x4 Sq.mm FR PVC insulated copper conductor single core cable in surface/recessed copper conductor single core cable for loop earthing as required.

Wiring for circuit/ sub main wiring along with earth wire with the following size PVC insulated copper conductor single core cable in surface/recessed PVC conduit as required.. i) 2x1.5 Sq.mm +1x1.5 Sq.mm earth wire

ii) 2x2.5 Sq.mm +1x2.5 Sq.mm earth wire

iii)4x6 Sq.mm +1x2.5 Sq.mm earth wire

iv) 4x10 Sq.mm +1x2.5 Sq.mm earth wire

Supplying and fixing following way,single pole and neutral sheet,MCB distribution board 415 volton surface/recess,complete with tinned copper busbar,neutral busbar,earth bar, din bar, detachable gland plate,interconnection,phoshatized and power painted including earthing etc. as required (But without MCB/ RCCB /Isolator) 4 Way (4+12 ways) double door (for normal lighting supply +power)-ground floor.

S/F TPN RCCB: Supplying and fixing following rating TP&N 415 V, residual current circuit breaker (RCCB), having a sensitivity current up to 300mA in existing MCB DB complete with connectins, testing and commissioning etc, as required. i)40 Amps

ii)63 Amps

Supplying and fixing following 240 volt "C" Series miniature circuit breaker suitable for inductive load following pole in the existing MCB DB complete with connection testing and commissioning etc. as required. i) 6/32 Single Pole

ii) 40A TPN MCB

iii) 50/63A TPN MCB

S/F Modular type swith / socket: Supplying and fixing following modular type switch / socket on the existing modular plate and switch box including connections but excluding modular plate etc as required. i) 5/6 AMPS, one way switch

ii)5/6 Amps, 3 pin socket outlet

Supplying and fixing modular type blanking plate- Supplying and fixing modular blanking plate on existing modular plate switch box excluding modular plate etc as required

Supplying and fixing electronic musical call bell suitable for D.C./A.C., single phase 230 Volt complete as required

Installation of exaust fan up to 450 mm sweep in the existing opening including making the hole to cut the size of the above fan, making good the damage, including connection, testing, commissioning etc as required.

Supplying and drawing following pair, 0.5 sq.mm FR PVC copper conductor, unarmoured telephone cable in the existing sueface/ recessed steel / PVC conduit as required. 2 Pair

Supplying and fixing following modular type switch/ socket on the existing modular plate and switch box including connection but excluding modular plate etc as required. Telephone Socket Outlet

Supplying and fixing of following size of PVC Conduit along with the accessories in surface/ recess including cutting the wall and making good the same in case of recessesd conduit as required for Tele, RJ 45 Cat 6 data outlet for computer network. 25 mm

Supply and fitting of 400 mm, 230V AC Wall/ cabin fan including fixing the bracket, making, connection testing, commissioning etc as required( make-Bajaj/Havells/Corompton.)

Supplyi and fitting of 300 mm, 230V AC exaust fan in the existing opening including making good the damage, connection testing, commissioning etc as required( make-Bajaj/Havells/Corompton.)

Supply and fixing of white and glass, steel, Torando lamp base suitable for LED 12W with protection-IP44 bathroom safe, make- Phiolips-12NC Code-915002702002/Bajaj/Havells.

Supply installtion of wall light stain nickle and glass, metral driver, lamp suitable for LED 6W with protection-IP21 bathroom safe, make- Phiolips-12NC Code-915002702002/Bajaj/Havells.

WW and plastic for driver, lamp base LED 25W for 5 meter WW with driver, lumen 350lm/m make- Phiolips-12NC Code-919215850441/Bajaj/Havells.

Supply erection and commissioning of recess mounted white powder coated CRCA housing with LED 36W luminaire and all accessories as required. ( Make: Bajaj-BCTBRL 18W ZT/Havells-LHEWDRP7PK 1W034/ Jaguar/Philips)

Supply erection and commissioning of recess mounted white powder coated CRCA housing with LED 18W luminaire and all accessories as required. ( Make: Bajaj-BCTBRL 18W ZT/Havells-LHEWDRP7PK 1W034/ Jaguar/Philips)

Supply, installation, testing and commissioning of 2.0 TR, 230V, 50Hz Cassate airconditioner 3 star rating. Make Hitachi/Bluestar/Daikin.

Supply and installation of metal braket angle stand for out door unit of cassate AC.

Hard drawn suction line 1.325"(1"+3/8) with installation + liquidine 0.875"(7"/8).

Supply and installation of 1" hard PVC drainline for indoor unit of cassate AC.

Supply, erection and commisioning of armoured cu control cable 3 core X 1.5 Sq mm for connection in between outdoor unit to indoor unit ( Cassate AC).

Providing and fixing c.p. extentsion nipples 15 mm size with 12" BSP threads, 70 mm length and 30 mm breadth and weight not less than 18 gms.

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Circular shape 450 mm dia

Providing and fixing PTMT grating of approved quality and colour 125 mm nominal dia with 25 mm waste hole

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. i) 15 mm nominal outer dia Pipes

ii) 20 mm nominal outer dia Pipes

iii) 25 mm nominal outer dia Pipes

iv) 32 mm nominal outer dia Pipes

v) 40 mm nominal outer dia Pipes

Supplying materials and labours for constructing inspection chamber of designation class 75 B bricks size 750 mm deep, 600 x 450 internal dimension having 250 mm wall thickness in cement mortar ( 1:6 ) including 12 mm cement plaster ( 1:4 ) with punning on inside and cement plaster (1:6 ) with 600 x 475 mm G.I. cover with frame (Weight not less than 36 Kg.) in foundation and refilling all complete as per specification and direction of E/l.

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 150 mm dia. R.C.C. pipe

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 15 mm nominal bore

Providing and laying of 110 mm dia P.V.C. pipe for outlet of water to outlet drain including all accessories, i.e. lubricants, solventcement, clamp, ring, socket etc (SUPREME S.W.R.)

Providing and laying of 75 mm dia P.V.C. pipe for outlet of water to outlet drain including all accessories, i.e. lubricants, solventcement, clamp, ring, socket etc (SUPREME S.W.R.)

Providing and fixing PVC pipe fittings with all accessories ( supreme make) i) 110 mm Door Tee ( Supreme) P.V.C.

ii) 110 mm plain bend ( Supreme) P.V.C.

iii) 110 mm Door bend ( Supreme) P.V.C.

iv) 110 mm 45 degree offset ( Supreme)P.V.C.

v) 110 mm Cowel ( Supreme) P.V.C.

viI) 110 mm Plain Trap ( Supreme) P.V.C.

vii) 75 mm Door Tee ( Supreme) P.V.C.

viii) 75 mm plain bend ( Supreme) P.V.C.

ix) 75 mm Door bend ( Supreme) P.V.C.

x) 75 mm 45 degree offset ( Supreme)P.V.C.

xi) ) 110 mm plain Trap ( Supreme) P.V.C.

Providing and fixing ball valve ( full brass, KEC,APAR,ZOLLOTO make) all complete. 32 mm nominal bore

EWC with soft closing seat cover

2 Way bib Coak forhealth Focet

Health Faucet with 1 meter long easy flex tube in chrome finish and wall hook.

Toilet roll holder with flap

Flush Valve

Wash Basin

Soap Dispenser with glass bottle

Exposed part kid od single lever basin

Left hand side operated conceled body for sinfle lever mixture.

Wast coupling 32 mm size full threrade with 130 mm height

Bottle Trap

Towel ring squre with round flange

Angle cock

Director tble model no.:MJF/61101/B Size:(L)2400mm X (D)2330mm X (H)770mm . This precise Boss desk is designed with superb quality. We can find on the ample design, beautiful colour, elements large space and modernised styles, this L shape desk is sure to make a dramatic statement in the office. Featuring a cherry finish, with delicate panel moulding and a fantastic size. The frame of thetable gives the great look with the panel uoholstered with PVC material with gives the latherette look. The office desk comes with the side runner having enough storage space. Pedastal having three drawers to store essential. Drawers have the stylish handle which enhance the look. This piece will be an all-encompassing workspace in the office in your home for years to come.

Director chair model no.:HALX/37199 Size:(W)673 mm x (D)508mm x (H)1270 mm Material: Leather - Semi Aniline leather Base:Wooden Base

Visitor Chai MODEL No:HALX/371082

2 Seater Sofa Model No.:LAKEWOOD/2 Size:(L)1505 mm x (D)890mm Material:Premium latherette lakewood is a classic sofa that draws from contemporary design andboasts of meticolous craftsmanship. Dedicated pannelled back cushins with similar seating, lakewood oozes class from every angle. set on a moulded PVC base finished in deep Mahogany that flows from one end to the other blends the cushioning with the base. Encased in premium brown latherette upholstery, adds to the comfort and warmth of your living room. The sofa has a regal stance and a plush finish while being inviting at the same time.

Glass top Centre Table Model No.: ZEE/34480

Labour cess @ 1%

R.K ENTERPRISES