REPAIR / MAINT OF SECURITY WALL AND DRAINAGE SYSTEM 71 SUB AREA PRO UNIT, CONVEY GROUND AND 250 TC UNDER AGE B/R-I OF GE (N) UDHAMPUR

Demolition of cement concrete (unreinforced) as in ground floors and pavings, not exe 15cm thickness (below or above ground level), complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description and in any position, not otherwise specifically provided for, complete all as specified and directed.

Demolition of brick work or stone masonry, built in cement mortar including all quoines, arches, pillars etc. but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed.

Taking down cement plaster of any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water including remaval of derbis from site, complete all as specified and directed.

Raking out joints / pointing to random rubble or polygonal rubble uncoursed or brought up to courses stone masonry, complete all as specified and directed.

Dismantling of structural steel work of any description and in any position, complete all as specified and directed.

Dismantling of mild steel barbed wire / chain link fencing of any description, not otherwise provided for, complete all as specified and directed.

Dismantling of posts or struts (wood, steel or RCC) embeded in concrete of any section including taking out embedded portion and making good disturbed ground, complete all as specified and directed.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4, complete all as specified and directed.

All as per serial item No. 9.00 here-in-above but except stones.

M&L for brick work with sub class ‘B’, old size bricks, straight or curved on plan exc 6 mtr mean radius, built in CM 1:6, complete all as specified and directed.

All as per serial item No. 11.00 here-in-above but except bricks.

M&L for raised pointing to random rubble, uncoursed on brought upto course on stone masonry or concrete block walling in cement mortar 1:4, complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on fair face of brick work or concrete surfaces and finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for plain cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in coping, kerbing etc. including weathering, slightly rounded or chamfered, treading and necessary formwork if required at site, complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-1 (using 20mm graded crushed stone aggregates) as in floors, sub base of floors, complete all as specified and directed.

M&L for sand filling under floors or in foundations or under paver blocks including watering and consolidation, complete all as specified and directed.

Providing precast cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) road side kerb stone etc. (of any section indicated) with plain fair faces including chamfers, weathering, throating etc. and setting in cement mortar 1:4, complete with joints to match and directed.

M&L for machine pressed rubber moulded manufactured/ compacted by vibrating table method precast concrete interlocking paver block of any shape and size, glossy finish, confirming to IS:15658-2006 of 60mm thickness M-35 grade with grey cement and pigment and joints filled with sand, complete all as specified and directed.

All as per serial item No. 19.00 here-in-above but except paver blocks.

M&L for 20mm thick chequered cement concrete tiles, size exc 0.04 Sqm but not exc 0.16 Sqm each as in floors for external use, set, jointed and pointed in neat cement slurry, laid over and including 15mm thick screed bed or bedding layer in CM 1:4 and pointed in coloured tiles grout to match the shade of tiles, complete all as specified and directed.

M&L for machine pressed rubber moulded manufactured/ compacted by vibrating table method precast concrete interlocking paver block of any shape and size, glossy finish, confirming to IS:15658-2006 of 80mm thickness M-40 grade with grey cement and pigment and joints filled with sand, complete all as specified and directed.

M&L for factory made, heavy duty, full body digital paving coloured tiles of size 300mm x 300mm x 10mm thick as in floors for external use, laid over and including 15mm thick screed bed or bedding layer in CM 1:4 including jointed with neat cement slurry and pointed in coloured tile grout to match the shade of tiles, complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in foundation, filling in and mass concrete etc, complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in surface channels and drain,complete all as specified and directed.

M&L for mild steel framed work for grills, gratings etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work, conforming to Fe-290 Gde-E-165, complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over one coat of primer, complete all as specified and directed.

M&L for mild steel work for posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting and similar work, conforming to Fe-290 Gde E-165, complete all as specified and directed.

Excavation in post holes (or similar holes) each not exceeding 0.50 Cum in any type soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm thick, watering, and removing surplus soil, complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) as in foudation for fencing post, filling in and mass concrete, complete all as specified and directed.

M&L for GI wire 3mm dia, cut to length, bent to shape required including cranking, bending, spirally for hooping for securing wire links at top & bottom, complete all as specified and directed.

S&F in repairs/ replacement of galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc. complete all as specified and directed.

Restraining, resecuring including making good to galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts including, securing or tying at crossings with and including provision of galvanised mild steel wire, staples or steel pins etc. complete all as specified and directed.

Supply only chain link fencing galvanised mild steel wire 3mm dia, mesh size not less than 50mm x 50mm or 75mm x 75mm etc. including provision of MS binding wires or fixing with nuts and bolts with angle iron posts, complete all as specified and directed.

Fixing only chain link fencing including line wires wearing alternate mesh, any mesh and size and any type to any type of standards, rails, straining bolts etc. including provission of binding wire, complete all as specified and directed.

S&F mild steel bolts, purpose made with hexagonal or square head at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 30cm long and dia of neck exceeding 12mm but not exceeding 20mm, complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes, single socketed in any length for drain out rain water, in weep holes, complete all as specified and directed.

M&L for preparation of newly or previously untreated steel surface of any description exc 10cm with or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.

M&L for preparation of newly or previously untreated steel surface of any description not exc 10cm with or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.

M&L for preparation of old steel surface of any description, exc 10cm with or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer including scrapping, removing of existing paint as required, complete all as specified and directed.

M&L for preparation of new concrete surfaces / plastered surface of any description, over 10cm girth or width not otherwise described and applying two coats of synthetic enamel paint over a coat of primer, complete all as specified and directed.

M&L for preparation of old concrete surfaces / plastered surfaces of any description, over 10cm girth or width not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed.

M&L for preparation of plastered or un-plastered surface, old decorative and washing down, brooming down or steel wire brushing etc and applying one coat of cement base paint on walls, complete all as specified and directed.

M&L for preparation of plastered or un-plastered surface, old decorative and washing down, brooming down or steel wire brushing etc. and applying one coat of first quality exterior grade wheather proofing acrylic emulsion paint on walls, complete all as specified and directed.

M&L for preparation of plastered or un-plastered surface, old decorative and washing down, brooming down or steel wire brushing etc. and applying two coats of first quality exterior grade wheather proofing acrylic emulsion paint on walls, complete all as specified and directed.

Dismantling of asbestos cement / CGI (corrugated, semi corrugated) sheets as in roof covering including ridges, complete all as specified and directed.

S&F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap, fixed with coach screws and washer as in roofs, walls etc, complete all as specified and directed.

S&F 0.50mm thick prepainted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to walls, fixed with self tapping screws, complete all as specified and directed.

S&F 0.50mm thick prepainted galvalume aluminium zinc coating GI based plain steel sheet of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to walls / ridges, fixed with self tapping screws, complete all as specified and directed.

M&L for mild steel work for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, complete all as specified and directed.