Construction of model school at different District under RMSA Assam at village Gamariguri under Gobardhana Block in Barpeta District (Group No. 5) (Balance Work)

Amount

Earthwork in excavation for foundation trenches of walls, retaining walls, footings of column, steps, septic tank etc. including refilling (return filling) the quantity as necessary after completion of work, breaking clods in return filling, dressing, watering and ramming etc. and removal of surplus earth with all lead and lifts as directed and specified in the following classification of soils including bailing out water where necessary as directed and specified.(A) Up to a depth of 2.00m below the existing ground level.

Providing soling in foundation and under floor with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete.(a).Brick on flat soling.

Plain cement concrete works with coarse aggregate of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately).(b) In prop 1cement: 4 sand :8 coarse aggregate by volume

Providing fitting, hoisting and fixing of roof trusses including purlins fabricated out of M.S. black-tubes conforming to relevant I.S. code, as per approved design and drawings including providing M.S. cleats, base plates, bolts and nuts and one coat of red oxide Zinc Chromate primer and two coats of approved enamel paints complete including fitting necessary cleats etc. for fixing ceiling joists as per design and drawing as directed.

Providing, fitting and fixing powder coated pressed steel windows of standard rolled steel sections as per relevant I.S. Code, joints mitred and welded with 15mmx13mmx100mm lugs embedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than 65mm and not less than 15mm wide) bolting device, steel handles, pegs, stays of 300mm long etc. complete including providing 12mmx12mm sq. bars duly welded to steel frame at not more than 12cm c/c applying a priming coat of red-lead paint etc. complete as per drawing. Fixed

Raising low site around the building with approved soil obtained from outside by truck carriage including breaking clods, dressing etc. complete including paying necessary forest royelty, sales tax, land compensation, municipal gate fees, if any monopoly duty etc. (profile measurement to be taken and 12.5% deduction for shrinkage to be made from total quantity) etc. complete as directed and specified. (b) Other than Guwahati city

Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished ) b) Tower bolts i) 300mm x 12mm

Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished ) c) Door handles ii) 100mm

Supplying, fitting, fixing anodised aluminium fittings of approved make, resonably smooth, free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.( anodised to bright natural matt & satin finished ) d) Gate shutter hook & eye iv) 250mm

Providing drain with cement concrete (1:3:6) 10cm thick sides 10cm thick bed over brick flat soling including 15mm thick cement plastering in prop. 1:3 finished with a floating coat of cement slurry as directed with necessary shttering for sides and earth work in excavation of foundation trenches and refilling the sides after completion of work etc. as specified. ii). 300mm wide and average 250mm deep with bed slope 1 in 150 with initial depth of 100mm.

Supply, Installation, Fixing of DRY CHEMICAL POWDER Fire Extinguisher confirming to IS: 2171 with ISI mark and CO2 cartridge will be confirming to IS: 4947 with ISI mark, Powder will be confirming to IS: 4308 with ISI Mark (5 KG) BRAND : FIRESTOP / FIREND / FIRE SHIELD

Supply, Installation, Fixing of MECHANICAL FOAM (AFFF) Fire Extinguisher confirming to IS: 10204 with ISI Mark and CO2 Cartridge will be confirming to IS: 4947 with ISI mark, (AFFF) will be confirming to IS: 4989 with ISI Mark.(9 LTRS) BRAND : FIRESTOP / FIREND / FIRE SHIELD

Supply, Installation, Fixing of CARBON DIOXIDE Fire Extinguisher confirming to IS: 2878 with ISI Mark.(4.5 LITERS) BRAND: FIRESTOP / FIREND / FIRESHIELD

Refilling & Servicing of ABC Type 05 Kg Capacity Fire Extinguisher with ISI Mark refill etc. complete

Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia.

Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (iv) 75mm dia.

Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in: Sides and Soffits of Beams, beam haunchings, cantilever girders, bressumers, lintels and horizontal ties.For depth not exceeding 1.0M.

Providing form work of 12mm thick Plywood Board so as to give a rough finish including centering, shattering, strutting and propping etc., height of propping and centering below supporting floor to ceiling not exceeding 4.0M and removal of the same for in situ reinforced concrete and plain concrete work in: Flat Surfaces such as soffits of suspended floors, roofs, landings, cantelever slabs, chajjas, balconies and the like. Floors etc. upto 200mm in thickness.

Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. (I) In Sub-structure upto plinth level including dewatering if necessary (c) In proportion 1:5.

Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary. (c) With river sand or silt (predominantly non plastic) by truck carriage including loading and unloading.

112mm thick 1st class brick nogged wall in cement mortar including racking out joints and curing complete as directed in super structure above plinth up to 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement mortar and will be measured and paid separately) In cement mortar in proportion 1:4. (1 cement:4 sand)

10 mm thick Cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level including arises or rounded angles not exceeding 80mm girth and finished even and smooth including curing complete as directed. In cement mortar 1:4

15 mm thick Cement plaster in single coat on fair side of brick/concrete walls for interior plastering up to 1st floor level including arises, internal rounded angles,chamfers and / or rounded angles not exceeding 80mm in girth and finished even and smooth including curing complete as directed. In cement mortar 1:4

65 mm thick cement concrete floor consisting of 50 mm under layer of cement concrete in prop. 1:3:6 (1cement : 3 coarse sand : 6 coarse aggregate of 25mm and down) and 15 mm thick wearing layer in cement concrete in prop. 1:1:2 (1cement :1 coarse sand : 2 coarse aggregate of size 10mm down) laid in panels and finished with a floating coat of neat cement finish (using cement slurry for bond @ 2.75 kg. per square metre of floor area) including curing etc. complete as directed.

Cement concrete works in topping 1:1:2 (1cement :1sand :2 graded aggregates on R.C.C floor, tread and rise of steps finished with a floating coat of neat cement using cement slurry for bond @ 2.75 kg.of cement per sq. m. of floor (base concrete to be measured and paid separately) to be laid in panels including curing complete as directed. 15 mm thick

Providing Ceramic Tiles of approved quality, size, shape and thickness not less than 8 mm on floors, skirtings, treads and risers of steps over cement mortar bed 15 mm thick in prop. 1:3 (1 cement : 3 coarse sand ) including cutting where necessary finished with flush pointing with fix-A Tile Choksey/ Sika/ Pedelite/ Rouf/ White cement slurry mixed with approved pigment to match the shade of granite slab, complete at all levels as specified and directed (coloured pigment should be in conformity with colour of slab and as approved and directed by the Department). Executive range Somany/ Orient/Nitco/Asian Make Of size 400x400 mm and above

Providing Antiskid Tiles of approved quality size, shape not less than 8mm on floor, skirting over a cement mortar bed 15mm thick of 1:3 (1 cement: 3 coarse sand) approved make fix with Fix-A-Tile (Choksey/Sika/Pedelite/Rouf)/ white cement complete at all level as specified and directed. ii)Executive range-1 (Sizes 400 mm x 400mm and above)

Providing, fitting and fixing M.S. grill of required pattern for windows/ clerestory windows/ openingwith M.S. flats at required spacing in frame all round, squre or round M.S. bars with round headed bolts and nuts or screws. II Ornamental grill (c) Fixed to Brickwork/P.C.C/R.C.C.

Applying one coat of alkali resistance primer of approved brand and manufacture on wall surface after throughly brushing the surfaces free from mortar droppings and other foreign matter and including preparing the surface even and sand papered smooth.

Wall painting (two coats) with acrylic emulsion paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) on new surface to give an even shade after throughly brushing the surfaces free from mortar droppings and other foreign matter and sand papered smooth. (a).Acrylic Emulsion Paint approved brand and manufacture (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac)

Finishing old / new wall with water proofing weather coat smooth anti-fungal exterior painting of approved make of Berger paint of required shade after cleaning and clearing the surface etc. including scaffolding complete as directed at all levels (two coats)

Applying primary coat over new steel and other metal surface over 100m in width or girth after preparing the surface by throughly cleaning oil,grease, dirt and other foreign matter and scoured with wire brushes, fine steels, wood scrapers and sand paper. a). With ready mixed "red-lead/ red oxide" primer.

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint of approved brand and manufacture(Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac) to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. (i).Surfaces over 100mm in width or girth. a). General purpose (Asian paint/ Berger paint/ ICI paint/ J & N paint/ Nerolac).

Providing, fitting and fixing factory made Santro Flush door shutters having core & cross bands fabricated from seasoned 1st class timber, 25mm core battens, 2.5mm to 3.5mm uniformly thick cross bands, styles & rails made from hardwood timber of width not less than 50mm, fixed to the door frames (chowkath) with necessary hinges, screws, bolts etc. as specified and directed at all levels (Door fixtures and fittings to be measured and paid seperately.) (c) 40 mm thick

Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. (ii) 110mm dia.

Supplying, fitting and fixing PVC pipes of 6 Kg/cm2 (Supreme/Prince) or other ISI approved including joining ,fitting and fixing wiyh clamps etc.as necessary complete at all levels including below G.L as directed and specified. b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. 75 mm dia.

Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining ,fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia.

Supplying, fitting and fixing 87.5 degree PVC bend of (Supreme/Prince) or other ISI approved including joining ,fitting and fixing etc.as necessary complete at all levels including below G.L as directed and specified. a) In exposed surfaces or in trenches. 75mm dia.

Supplying fiting and fixing 87.5 degree PVC bend with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. (ii) 110mm dia.

Supplying fiting and fixing 87.5 degree PVC bend with door of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. 75mm dia.

Supplying fiting and fixing 45degree PVC bend of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia.

Supplying fiting and fixing 45degree PVC bend of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. 75mm dia.

Supplying fiting and fixing 45degree PVC bend of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. (ii) 110mm dia.

Supplying fiting and fixing 45degree PVC bend of (Supreme/Prince) or other ISI approved including joining , fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. b) Concealed by chiselling or breaking brick wall/C.C./R.C.C and making good to the damages. 75mm dia.

Supplying fiting and fixing PVC Plain single tee of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. (ii) 110mm dia.

Supplying fiting and fixing PVC Plain single tee of (Supreme/ Prince) or other ISI approved including joining, fitting and fixing etc. as necessary complete at all levels including below G.L. as directed and specified. a) In exposed surfaces or in trenches. 75mm dia.

Providing fitting and fixing PVC 110mm diacowel of ISI make complete as directed and specified.

Providing fiting & fixing C.P. Grating to the floors complete as directed and specified. 110mm dia

Providing & fixing chlorinated polyvinyle chloride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain and brass threated fittings i/c fitting the (A) exposed or intrenches a) 15 mm nominal outer dia pipe

Providing & fixing chlorinated polyvinyle chloride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain and brass threated fittings i/c fitting the (A) exposed or intrenches a) 25 mm nominal outer dia pipe

Providing & fixing chlorinated polyvinyle chloride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain and brass threated fittings i/c fitting the (A) exposed or intrenches a) 32 mm nominal outer dia pipe

Providing & fixing chlorinated polyvinyle chloride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain and brass threated fittings i/c fitting the (B) Concealed pipe with cutting chases & making good the walls a) 15 mm nominal outer dia pipe

Supplying fitting and fixing C.P. bib cock 15mm dia of approved brand directed and specified. (G.I. & C.P pipes will be measured separately) Essco make (b) Long body bib cock with wall flange

Supplying fitting and fixing chrome plated (C.P.) stop-cock of approved brand and size as mentioned below as directed and specified.(G.I. & C.P pipes will be measured and paid separately) Sona brand (a) 15mm dia Stop cock male-female /Angle stop cock

Supplying and fitting fixing C.P. pillar cock of 15mm dia of approved brand as specified and directed. Agmeco (classic) (a) Flat

Supplying and fitting gun metal country pit valve (full way valve) I.S.I. Make as specified and directed.32 mm dia.

Supplying and fitting gun metal country pit valve (full way valve) I.S.I. Make as specified and directed.20 mm dia.

Providing fitting and fixing vitreous water closet squatting pan (Indian type W.C Orissa pattern) with all fittings and fixtures complete including cutting and making good to the walls and floors whereever required. (Flushing Cistern to be paid separately) Indian type W.C Orissa pattern of size 580 x 440 mm a) White

Providing vitreous China wash basin with CI/MS brackets, C.P brass chain with plug,PVC waste pipe including painting of fittings and brackets, cutting and making good the walls wherever required. (Pillar cock, stop cocks, waste coupling are to be paid separately) (A) Parryware Make 630x450

Providing fitting and fixing vitreous china flat back type lipped front urinal basin with standard flush pipe and CP brass spreader andbrass unions, etc. complete including painting of fittings and brackets, cutting and making good the walls & floors wherever required. (a) White (5Ltrs)

Providing fitting and fixing vitreous china squatting plate urinal with automatic flushing cistern with standard flush pipe and CP brass spreader andbrass unions, etc. complete including painting of fittings and brackets, cutting and making good the walls & floors wherever required. (i) White (Cat. No. C0503)

Providing fitting & fixing laboratory sink of Parryware make with CI/MS brackets, C.P. brass chain with rubber plug, PVC waste pipe etc. complete including painting the fittings ,cutting &making good the walls wherever required. (Sink cock, stop cocks, waste coupling are to be paid separately. Hindware /Parryware

Providing fitting and fixing Mirror with plastic frame of size 500x400mm complete as directed and specified.

Providing, fitting and fixing recessed soap tray / soap dish complete as directed and specified. Stainless Steel

Providing, fitting and fixing CP towel rail complete as directed and specified. (d) Agmeco Made (i) Cubin 600mm long (Cat. No.CB-00202)

Supplying and placing plastic cylindrical vertical claused top (PCVC) tank of Sintex / Polycon / Patton make over the stagging with manhole cover with locking and cleaning arrangement including providing pads of size as required for inlet and outlet pipes 2000 Lt capacity (a) Sintex make

Labour for test boring with 40mm (internal) dia G.I. Pipes including keeping surplus of earth and every 2.00m after first 3.00m depth and delivering the same in nearest P.W.D. camp in the small tin container (container, scaffolding, tools etc. will have to be arranged by the contractor at his own cost).

Labour for boring hole for inserting tube well pipes through different soil/ rock media including hire charges of drill pipes, scaffolding, tools and plants as necessary and taking out the same and lowering pipes, fittings complete as directed by the Department.iii) Bore hole of 125mm diameter

Supplying, fitting and fixing pipes plain/bevel ended for casing, conforming to relevant IS codes of practice including supplying and fitting of tube well accessories, lowering of assembly pipes concentrically in the borehole followed by supplying and packing of pea gravel free from dirt, dust and other foreign materials in the annular space between the borehole and assembly pipes complete as directed by the Department. G.I. pipe a) TATA / SAIL (Medium) socket should be welded to the pipes. iv) 100mm diameter

Supplying, fitting and fixing pipes plain/bevel ended for casing, conforming to relevant IS codes of practice including supplying and fitting of tube well accessories, lowering of assembly pipes concentrically in the borehole followed by supplying and packing of pea gravel free from dirt, dust and other foreign materials in the annular space between the borehole and assembly pipes complete as directed by the Department. G.I. pipe a) TATA / SAIL (Medium) socket should be welded to the pipes. iii) 40mm diameter

Supplying fitting and fixing ISI approved PVC ribbed filter 3.00 metre long.

Development of the tube well with compressor or by over pumping unit for 48 hours till sand free discharge is obtained

Supplying fitting and fixing iron removal filter filling with treated sand, pebbles, manganishdioxide and other required materials of various filtration rate per hour of DOLPHIN make with all necessary fittings such as valve,bib cock,pipe connection etc.with a free maintanance period of six monthhs (A) With Zoloto fittings (I) 1000 liters capacity (b) 6 mm thick Vessel FRP

Construction of inspection pit inside measurement 450mm x450mm x450mm flush with 100mm diameter HCI/PVC pipes and cement concrete base in proportion 1:3:6 over flat brick soling, 12cm brick wall in cement mortar in proportion 1:4 finished with 13mm cement plaster in proportion 1:2 in side wall and floor. 450mm x450mm air tight C.I. inspection pit cover and frame complete including supplying of materials, necessary excavation of pit as directed.

Construction of filter bed in soak pit including earth work in excavation of soil and then filling up of the trench with brick bats/Charcoal covered with earth over a layer of A.C. plain sheet above brick bat filling complete as directed. (sizes of soak pit may vary depending on the sizes and capacities of the septic tank as well as the number of users as mentioned in the table.

Providing precast R.C.C slab over drain ,septic tank etc. in prop. 1:2:4 reinforced with 10mm M.S. bar @ 150mm centre both ways tying with 20 gauge black annealed wire with necessary shuttering , curing etc. complete including fixing in position as directed. a) 100mm thick slab

Providing Pre Painted Galvanized Iron Sheet Roofing (PPGI) (Dyna roof / Sathyam/ Durakolor/ Century Wells) at all levels including fitting and fixing with self drilling, self tapping screws complete. (Roof trusses, purlins etc. to be measured and paid separately.) (ii) 0.45 mm thick

Providing Pre Painted Galvanized Iron Sheet (PPGI) accessories (Ridges / Valley / Gutter /Flashing) (Dyna roof /Sathyam/ Durakolor/Century Wells) at all levels including fitting and fixing self drilling, self tapping screws complete complete. (ii) 0.45 mm thick

Wiring for light point with 1.5 Sq.mm PVC insulated unsheated 1.1 Kv grade (RR Kebel/Finolex/Havells make) single core copper conductor cable in surface PVC casing caping conduit wiring system including 6 Amps. Flush type switch (Anchor/Kolors Kany.com.make), ceiling rose I.C switch board phenoic laminated sheet cover painting etc. as required complete in 19mm dia rigid PVC casing caping conduits. a) Short point up to 3.00 meter length

Wiring for light point with 1.5 Sq.mm PVC insulated unsheated 1.1 Kv grade (RR Kebel/Finolex/Havells make) single core copper conductor cable in surface PVC casing caping conduit wiring system including 6 Amps. Flush type switch (Anchor/Kolors Kany.com.make), ceiling rose I.C switch board phenoic laminated sheet cover painting etc. as required complete in 19mm dia rigid PVC casing caping conduits. b) Medium point up to 6.00 meter length

Wiring for light point with 1.5 Sq.mm PVC insulated unsheated 1.1 Kv grade (RR Kebel/Finolex/Havells make) single core copper conductor cable in surface PVC casing caping conduit wiring system including 6 Amps. Flush type switch (Anchor/Kolors Kany.com.make), ceiling rose I.C switch board phenoic laminated sheet cover painting etc. as required complete in 19mm dia rigid PVC casing caping conduits. c) Long point up to 10.00 meter length

Wiring as in item no. E1 above in Recessed PVC. Conduit wiring system with 20 mm. dia, 2 mm thick, rigid P.V.C. Conduit to a Fan/exhaust Fan point including 6 Amps flush type (Anchor/Kolors Kany.com. Make) switch, ceiling rose I.C. switch board with phenolic laminated sheet cover as required complete. Medium point upto 6.00 metre length

Wiring as in item no. E1 above in Recessed PVC. Conduit wiring system with 20 mm. dia, 2 mm thick, rigid P.V.C. Conduit to a Fan/exhaust Fan point including 6 Amps flush type (Anchor/Kolors Kany.com. Make) switch, ceiling rose I.C. switch board with phenolic laminated sheet cover as required complete.Long point up to 10.00 meter length

Wiring for 5 pin 6 Amps power plug point with 1.5 sq. mm PVC insulated unsheathed ISI marked single 1.1KV grade ISI core copper conductor cable (RR Kebel/Finolex/Havells make) in surface PVC conduit wiring system including providing and fixing 5 pin 6 Amps socket outlet, flush type and 6 Amps flush type switch (Anchor/Korols Kany.com make) iron clads switch board (ISI marked) phenolic laminated sheet cover including earth continuity with 2.5 sq. mm. PVC insulated unsheathed copper wire (R.R Kebel/Finolex/Havells make) to the third pin and painting. etc. as required complete with 19mm dia rigid PVC conduits. Medium point upto 6.00 metre length

Wiring for 5 pin 6 Amps power plug point with 1.5 sq. mm PVC insulated unsheathed ISI marked single 1.1KV grade ISI core copper conductor cable (RR Kebel/Finolex/Havells make) in surface PVC conduit wiring system including providing and fixing 5 pin 6 Amps socket outlet, flush type and 6 Amps flush type switch (Anchor/Korols Kany.com make) iron clads switch board (ISI marked) phenolic laminated sheet cover including earth continuity with 2.5 sq. mm. PVC insulated unsheathed copper wire (R.R Kebel/Finolex/Havells make) to the third pin and painting. etc. as required complete with 19mm dia rigid PVC conduits. Long point up to 10.00 meter length

Wiring as in item no. 115 when fixed on the same board In Recessed PVC. conduit wiring system on the recessed I.C. switch board.

Wiring for twin control light point with 1.5sq. Mm PVC……….as required. Long point up to 10.00 meter length

Wiring for 5 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated unsheathed I.S.I. marked single core copper Conductor cable (R.R Kable/Finolex/Havells Make) in Recessed P.V.C. conduit wiring system including providing and fixing 5 pin 16 Amps flush type socket outlets (Anchor Make) and 16 Amps flush type switch (Anchor/Kolors Kany.com. Make), I.C. switch board (I.S.I. marked) with phenolic laminated sheet cover earth continuity with 2.5 sq. mm PVC. insulated unsheathed single core copper conductor cable to the 3rd pin as required complete with 20 mm. dia, 2 mm thick rigid P.V.C. Conduit pipes. (Medium point upto 6.00 metre length)

Wiring for 5 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated unsheathed I.S.I. marked single core copper Conductor cable (R.R Kable/Finolex/Havells Make) in Recessed P.V.C. conduit wiring system including providing and fixing 5 pin 16 Amps flush type socket outlets (Anchor Make) and 16 Amps flush type switch (Anchor/Kolors Kany.com. Make), I.C. switch board (I.S.I. marked) with phenolic laminated sheet cover earth continuity with 2.5 sq. mm PVC. insulated unsheathed single core copper conductor cable to the 3rd pin as required complete with 20 mm. dia, 2 mm thick rigid P.V.C. Conduit pipes. (Long point up to 10.00 meter length )

Wiring for 5 pin 16 Amps power plug point with 4 sq. mm. P.V.C. insulated unsheathed I.S.I. marked single core copper Conductor cable (R.R Kable/Finolex/Havells Make) in Recessed P.V.C. conduit wiring system including providing and fixing 5 pin 16 Amps flush type socket outlets (Anchor Make) and 16 Amps flush type switch (Anchor/Kolors Kany.com. Make), I.C. switch board (I.S.I. marked) with phenolic laminated sheet cover earth continuity with 2.5 sq. mm PVC. insulated unsheathed single core copper conductor cable to the 3rd pin as required complete with 20 mm. dia, 2 mm thick rigid P.V.C. Conduit pipes. (Extra long point up to 15.00 M long)

Wiring for drawing sub-main line with P.V.C. insulated unsheathed 1.1 K.V. grade (I.S.I marked, R.R Cable/Finolex/Havells Make) single core copper conductor cable in with earth continuity in Recessed PVC conduit wiring system. With 2 x 2.5 sq. mm. + earth continuity with 1x2.5 sq. mm. PVC.insulated unsheathed single core copper conductor cable in 19 mm. dia., 2 mm thick Rigid P.V.C. Conduit pipes.

Wiring for drawing sub-main line with P.V.C. insulated unsheathed 1.1 K.V. grade (I.S.I marked, R.R Cable/Finolex/Havells Make) single core copper conductor cable in with earth continuity in Recessed PVC conduit wiring system. With 2 x 4 sq. mm. + earth continuity with 1x2.5 sq. mm. PVC.insulated unsheathed single core copper conductor cable in 19 mm. dia., 2 mm thick Rigid P.V.C. Conduit pipes.

Wiring for drawing sub-main line with P.V.C. insulated unsheathed 1.1 K.V. grade (I.S.I marked, R.R Cable/Finolex/Havells Make) single core copper conductor cable in with earth continuity in Recessed PVC conduit wiring system. With 2 x 6 sq. mm. + earth continuity with 1x4 sq. mm. PVC.insulated unsheathed single core copper conductor cable in 19 mm. dia., 2 mm thick Rigid P.V.C. Conduit pipes.

Wiring as in item no. 68 above with 3 x 30sq mm + earth ………..pipes

Supplying and fixing fancy wall bracket of Anodised aluminium…..complete

Supplying and fixing 250mm dia (Nominal size) flush type circular………bulbs)

Installation of Earth station with 40 mm. dia. and 4.50 metre long G.I. pipe with necessary G.I. reducing socket 40 mm x 20 mm. size locking arrangement with h'inged cover plate, funnel, G.I. nuts, through bolts etc. for putting pipe and re-fitting with ............complete.

Extra above item no. 193 for using salt (5 kg) and Charcoal (64 kg. for pipe earth electrode as required.

Supplying and fixing 8 SWG GI erth wire….complete

Providing and fixing of lighting Conductor final made of 25mm……….nuts

Providing and fixing of MV Danger Notice………required.

Supplying including fitting fixing of high speed A.C. Ceiling fan complete with all accessories like down rod, canopy etc. of following sweeps with making necessary connections etc. as required complete and as directed by the Department [Without regulator].1200 mm sweep

Supplying including fitting fixing of A.C. Exhaust fan in the existing hole on the wall of follwing sweeps and making necessary connections etc. as required complete and as directed by the Department. Heavy duty for 900rpm/..sweep

Supplying fitting and fixing industrial plug & socket…..deptt. B) 30 A capacity……MCB

Supplying with fitting and fixing sheet steel,phosphatised, powder painted Double door surface mounting SPN MCB DB (IP-43 protection) incorporated with bas-bar, Neutral link, Earth bar and din rail etc fitted on wall with grouting nuts & bolts as reqd. Complete with making necessary connection as specified and directed by the deptt. 4 way TPN ...double door

Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as specified and directed by the deptt. B) Series [a]6A

Supplying with fitting and fixing single Pole 10 KA 240/415V 50Hz MCB of the following capacity complete with making necessary connection as specified and directed by the deptt. B) Series [b]16A

Supplying with fitting and fixing TPN 10 KA 415V 50Hz MCB Conform to IS/IEC 60898-1:2002 of the following capacity complete with making necessary connection as specified and directed by the deptt.(i)(40A)

Supplying with fitting and fixing TPN 10 KA 415V 50Hz MCB Conform to IS/IEC 60898-1:2002 of the following capacity complete with making necessary connection as specified and directed by the deptt.(63A)

Supplying with fitting and fixing panel mounting open execution 25KA 415V 50Hz 4P MCCB (Ics=Icu, adustable Ir setting 0.7-1)( without enclosure) of the following capacity complete with making necessary connection as specified and directed by the deptt. [Legrand/Merlin Gerin/ Hagger make] 1.25 KA 415V 50 Hz 4P MCCB [b] 63A

Supplying with fitting and fixing panel mounting open execution 25KA 415V 50Hz 4P MCCB (Ics=Icu, adustable Ir setting 0.7-1)( without enclosure) of the following capacity complete with making necessary connection as specified and directed by the deptt. [Legrand/Merlin Gerin/ Hagger make] 1.25 KA 415V 50 Hz 4P MCCB 125A

Supplying with fitting and fixing 30 m A sensitivity 240/415 V 50 Hz DP RCCB of the following …………..department. [Legrand/ Hagger make] 63A

Supply and laying of following size PVC/XLPE.insulated and PVC sheathed 11 KV gd aluminium conductor LT armoured UG. cable laid ......department. 35.00 mm2 3 & 1/2 core U.G. Cable.

Supply and laying of following size PVC/XLPE.insulated and PVC sheathed 11 KV gd aluminium conductor LT armoured UG. cable laid ......department. 35.00 mm2 3 & 1/2 core U.G. Cable……GI pipe

Supplying including installation of submersible…..complete. (2HP Three Phase)

Supplying installation testing and commissioning of the following prewired CFL/Flourescent……..tube. Bajaj Make….sevelete

Supplying installation testing and commissioning of the following Alluminium Wound outdoor type sub-station….Nos. vii) LT cross arm = 6 Nos……capacity

Supplying fittnig TPN 415V 50Hz AC 23A duty double……deptt. 125A

Supplying with erection and commission of 10.ooMtr length seamless………4.500mm 5.20mtr (bottom0139.70………….od.

Supplying with fitting and fixing of 1 x 150W HPSV integral…..deptt.

Supplying with fitting and fixing sheet steel, cable junction box of size 40 cmx20cmx15cm made of 16 SWG thick MS sheet provision for hing door of metal primer.......items: 1. 12 mm x mm x 15 cm long 2 strip copper busbar..1 Set 2. 6-32 Amps"L" Series DP MCB........1 No 3. 6 Amps "L" Series SP MCB as outgoing.......1 No

Supplying including fitting and fixing of the following luminaries complete with all accessories……….HPF (Philips make)

Supply and laying of following size PVC/XLPE.insulated and PVC sheathed 11 KV gd aluminium conductor LT armoured UG. cable laid ......department. 4.00 mm2 2 core U.G. Cable.

Supply and laying of following size PVC/XLPE.insulated and PVC sheathed 11 KV gd aluminium conductor LT armoured UG. cable laid ......department. 6.00 mm2 2 core U.G. Cable.

Ganesh Ch. Das