Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.2 LAdmitted-Finance 21 2 BAJE SHIBPUR 2ND BYE LANE HOWRAH 711 102 | HOWRAH | WEST BENGAL | 711102 | ₹9.2 L | L1 | Admitted-Finance |
| 2 | L2₹10.3 L+₹1.1 L (12.5%)Admitted-Finance 81 MRIDULA BHAWAN CHATRIBARI GUWAHATI 700001 ASSAM | KOLKATA | WEST BENGAL | 700001 | ₹10.3 L+₹1.1 L (12.5%) | L2 | Admitted-Finance |
| 3 | Rejected-Technical | - | - | Rejected-Technical Technically Dis-Qualified |
| 4 | Rejected-Technical | - | - | Rejected-Technical Technically Dis-Qualified |
| Sl No | Description | Qty | Unit | GHOSH ENTERPRISE L1 | Das Consultancy And Agency Services L2 |
|---|---|---|---|---|---|
| 1.00Complete repair and refurbishment of FRP boats including: i.) Renewal of worn-out rubber fendering. ii.) Strengthening of bollards, handles, hooks, lifting and arrangements. iii.) Fibre-gluing and fiberglass reinforcement of the hull and bottom surface to ensure leak-proof operation. iv.) Repair, renewal, and proper fixing of seating arrangements. v.) Necessary modifications(if needed) to install the Outboard Motor (OBM) as required as per direction of EIC/ Surveyor. | |||||
| 1.01 | Labour+machining+consumable charges | 1 | Comp. Job | 50,000 ₹50,000 Lowest | 75,000 ₹75,000 |
| 1.02Cost of spares/material (actual bill/invoice + 10%) | |||||
| 2.00(i) Grease pump of the dredge pump to be service/repair (ii) Installation of new grease line is to be provided for the ladder pulley pin arrangment to facilitate proper lubrication (iii) Greasing line points/nipples, grease pump of and greasing arrangement(motor & pump etc) of ladder to be seviced/repaired (iv) All grease lines to be checked and repaired with renewal of its pipe, adaptor, nozzle, tube, coupling nut, connector, screw sleeve, coupler and nipple etc as required as per direction of EIC/ Surveyor. | |||||
| 2.01 | Labour+machining+consumable charges | 1 | Comp. Job | 50,000 ₹50,000 Lowest | 95,000 ₹95,000 |
| 2.02Cost of spares/material (actual bill/invoice + 10%) | |||||
| 3.00(A) Hydualic oil leakgage was observed from (i) the brake cylinders of both port and stbd anchor winches (ii) the brake cylinders of both ladder winches. (B) Hy.hose to be renew (i)1 cutter main hose (ii) 2 spud tilting hose(v)Port side anchor winch pipe (C) All MS clamps to be renewed (D) all hydraulic lines to be checked and leakage to be arrested with renewal of its gaskets, seals, o-rings, hoses, solenoid valves, emergency hydraulic system, sensors etc as required and ensure air free operation as required as per direction of EIC/ Surveyor. | |||||
| 3.01 | Labour+machining+consumable charges | 1 | Comp. Job | 55,000 ₹55,000 Lowest | 80,000 ₹80,000 |
| 3.02Cost of spares/material (actual bill/invoice + 10%) | |||||
| 4.00(i) AC power connection for searchlight to be provide (ii) Engine room aft side blower to be repair/replace (iii) Harbour generator main panel breaker to be replace (iv) Electrical power distribution board in engine room, operator room, rest room,engine room, general alarm bell, D.C. horn, switch boards, lighting, light cover, exhaust fan, solar system, navigation lights and DC system are to be checked and rectified as required as per direction of EIC/ Surveyor. | |||||
Tender Value
₹19.5 L
EMD Value
₹39,000
Closing Date
24 Jul 2026, 11:30 amClosed
Director
IWAI, Pandu Port Complex, Pandu, Guwahati-12
Annual Afloat Repair of CSD Mandovi for the year 2026-27
2026_IWAI_916504_1
IWAI/GHY/MANDOVI/4(94)/2026-27
Open Tender
Marine Works
Works
60 days
NW-2
As per tender document
2 documents required · 2 mandatory
₹5,900
Yes
IWAI FUND PLAN
₹39,000
Yes
3 Aug 2026
8 Jul 2026
25 Jul 2026
9 Jul 2026
24 Jul 2026
9 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Complete repair and refurbishment of FRP boats including: i.) Renewal of worn-out rubber fendering. ii.) Strengthening of bollards, handles, hooks, lifting and arrangements. iii.) Fibre-gluing and fiberglass reinforcement of the hull and bottom surface to ensure leak-proof operation. iv.) Repair, renewal, and proper fixing of seating arrangements. v.) Necessary modifications(if needed) to install the Outboard Motor (OBM) as required as per direction of EIC/ Surveyor. | |||||
| 1.01 | Labour+machining+consumable charges | 1 | Comp. Job | - | - |
| 1.02 | Cost of spares/material (actual bill/invoice + 10%) | - | - | - | - |
| 2(i) Grease pump of the dredge pump to be service/repair (ii) Installation of new grease line is to be provided for the ladder pulley pin arrangment to facilitate proper lubrication (iii) Greasing line points/nipples, grease pump of and greasing arrangement(motor & pump etc) of ladder to be seviced/repaired (iv) All grease lines to be checked and repaired with renewal of its pipe, adaptor, nozzle, tube, coupling nut, connector, screw sleeve, coupler and nipple etc as required as per direction of EIC/ Surveyor. | |||||
| 2.01 | Labour+machining+consumable charges | 1 | Comp. Job | - | - |
| 2.02 | Cost of spares/material (actual bill/invoice + 10%) | - | - | - | - |
| 3(A) Hydualic oil leakgage was observed from (i) the brake cylinders of both port and stbd anchor winches (ii) the brake cylinders of both ladder winches. (B) Hy.hose to be renew (i)1 cutter main hose (ii) 2 spud tilting hose(v)Port side anchor winch pipe (C) All MS clamps to be renewed (D) all hydraulic lines to be checked and leakage to be arrested with renewal of its gaskets, seals, o-rings, hoses, solenoid valves, emergency hydraulic system, sensors etc as required and ensure air free operation as required as per direction of EIC/ Surveyor. | |||||
| 3.01 | Labour+machining+consumable charges | 1 | Comp. Job | - | - |
| 3.02 | Cost of spares/material (actual bill/invoice + 10%) | - | - | - | - |
| 4(i) AC power connection for searchlight to be provide (ii) Engine room aft side blower to be repair/replace (iii) Harbour generator main panel breaker to be replace (iv) Electrical power distribution board in engine room, operator room, rest room,engine room, general alarm bell, D.C. horn, switch boards, lighting, light cover, exhaust fan, solar system, navigation lights and DC system are to be checked and rectified as required as per direction of EIC/ Surveyor. | |||||
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.93 MB
Tenderdoc_CSD-Mandovi.pdf
Tender Documents • 3.81 MB
BOQ_963171.xls
BOQ • 0.32 MB
Corrigendum.pdf
PDF • 0.53 MB
Corrigendum_LD.pdf
PDF • 0.35 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .