PROVN OF PATHWAY DOORS AND OTHER CONNECTED WORKS AT AGNIBAAZ OFFRS MESS AND PROVN OF FOOTHPATH IN VARIOUS LOCATION OF NASIRABAD MIL STN UNDER GE NASIRABAD

M&L for 15mm thick cement plaster on fair faces of bricks surfaces or concrete surfaces in CM 1:4 finished even and fair without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surface of walls and applying three coats of white wash complete all as specified and directed.

M&L for 100mm thick PCC 1:2:4 Type B-2 using 40mm graded stone aggregate as in sub base complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed

M & L for preparation of New surfaces of kerb stone and applying two coats of synthetic enamel paint of different colour for neat and smooth finishing complete all as specified and directed.

S & F in 110mm bore PVC pipes single socketed in any length with rubber ring joints below the PCC complete all as specified and directed.

S & F 1st class Hardwood 40mm thick plain design as per direction, framed, design panelled shutters with panel of timber panels are raised and have bevelled or chamfered margins and framing is moulded on (solid for each side) with and incl provn of 12 mm thick toughned glass with embelem logo size upto 0.1 to 0.6 sqm in middle rail of door incl PU polishing using high pressure spray gun mirror finish on surface of any description widht or girth incl cleaning and preparing the surface after applying a coat of wood filler on new works with two or more coats of PU polish and including Brass hinges of 100-150 mm long complete all as specified and directed.

S & F 1st class Hardwood plain, solid, curved chowkhats of size 150mmx100mm and framess,wrought,framed rebated on the solid rounded or chamfered put together with glue pinned at joints incl PU polishing using high pressure spray gun mirror finish on surface of any description width or girth including cleaing and preparing the surface after applying a coat of wood filler on new works with two or more coats of PU polish complete all as specified and directed.

S & F 300 mm long Brass,anodised, sliding door bolts with hasps, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.