PROVN OF RCC STORM DRAIN 2.10 MTR INNER WIDE AND 1MTR AVERAGE DEPTH INCLUDING BOX CULVERT (1 NO) (185 RM LENGTH OF DRAIN) FROM ADSR UNIT PREMISES TO ADSR OFFRS MESS UNDER GE JHANSI

Amount

Excavation in trenches not exc 1.5 m wide and not exc 1.50 in depth for foundation and getting out in soft/loose soil complete all as specified and as directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exc. 250mm in soft/loose soil, complete all as specified and as directed.

Removing, excavated material n.exc 50 m and deposited where directed at a level n.exc 1.5m from the starting point complete all as specified and as directed.

M& L for PCC (1:4:8) type D2 with 40 mm graded aggregate as in floundatiion filling and mass concrete complete all as specified and as directed.

M &L RCC 1:1, 5:3 type A1, M25 (Design Mix) as in Foundations, including footings and mass concrete as in drain & Culvert etc complete all as specified and as directed.

M & L RCC M25 design Mix as in walls and the like; any thickness as in drain & Culvert etc complete all as specified and as directed.

M & L for M25 design Mix as in slab supported on walls complete all as specified and directed.

M & L for Mild steel TMT bars (Fe-500D) 10mm dia and over reinforcement, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

All as per item No 8 herein before but 6mm to 8mm dia complete all as specified and as directed.

All as per item No 8 herein before but as in spacers and stirrups etc complete all as specified and as directed.

S& F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed..

M & L Rendering 5mm thick on fair faces of brick work or concrete surfaces complete all as specified and as directed.

Formwork to sides of concrete foundations / footings, and similar work to vertical or to batter complete for rough finished surface all as specified and directed.

Formwork to faces of walls, and similar work including edges, vertical or to batter etc. complete for rough finished surface all as specified and directed.

Form work to soffits of suspended slabs and sides of floor slab, roof slab ,landing slab and similar work n exc 200mm thick including edges complete for rough finished surface all as specified and directed.

M&L for PCC 1:2:4 Type B1 (using extra cement as in benching, copings and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.

Extra for forming fair finished drain or channel exc 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and as directed.

Preparing Newly Plastered wall Surfaces and applying two Coats of cement base paint and over one coat of primer complete all as specified and as directed.

M/s Jagdish Chandra Arora

FTH Traders

Soni Traders

M/s JS Constructions

Shree Jee Associates