Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.4 LAccepted-AOC 1501 BHAGWATI EMINENCE SAVITRIBAI PHULE MARG BESIDES R R PATIL GARDEN SECTION 13 NERUL E NAVI MUMBAI | RAIGAD | MAHARASHTRA | 400702 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹44.0 L+₹2.7 L (6.48%)Rejected-Finance | L2 | Rejected-Finance NOT ADMITTED BEING L2 | |
| 3 | L3₹45.2 L+₹3.9 L (9.48%)Rejected-Finance 702 A1 SHREE PRASAD TAWADEWADI SHREE DATTAGURU PARK KUMBHARWADA URAN DIST RAIGAD MAHARASHTRA 400 702 | URAN | RAIGAD | MAHARASHTRA | 400702 | L3 | Rejected-Finance NOT ADMITTED BEING L3 | |
| 4 | L4₹45.5 L+₹4.2 L (10.1%)Rejected-Finance FLAT NO 201 GREEN VALLEY CHS PLOT NO 26 SECTOR 19 NERUL EAST NAVI MUMBAI 400 706 | THANE | MAHARASHTRA | 400706 | L4 | Rejected-Finance NOT ADMITTED BEING L4 | |
| 5 | L5₹46.1 L+₹4.8 L (11.6%)Rejected-Finance | L5 | Rejected-Finance NOT ADMITTED BEING L5 |
| Sl No | Description | Qty | Unit | M.K Enterprises L4 | R A Electric Co. L2 | SREE HARITHA ASSOCIATES L1 | Sagar Electricals L3 | venus enterprises L5 |
|---|---|---|---|---|---|---|---|---|
| 1.00Notes : - (i) The is at Serial No.120 of TPP 2025-26 (ii) Please refer schedule 'A' notes before quoting the tender. (iii) Amount of Schedule of Credit shall be deducted off line by the department. | ||||||||
| 1.01 | M&L for earthing with GI earth plate electrode of size 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below the normal ground level connected with GI strip 25 x 4 mm by means of bolts, nuts, check nuts & washers of galvanished iron steel including fixed on wall with porcelain insulator with proper fixing nut and bolt with washer and necessary excavation and earth work in any type of soil, removing surplus soil to a distance not exc 50 m, with and including PCC chamber in PCC (1:2:4) , type B1 using (20 mm graded stone aggregate) mild steel angle iron frame made out of MS angle iron of size 40x40x6 mm thick duly painted with two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer hinged with and including 6mm thick CI cover with handle, watering arrangement with funnel internally secured with wire mesh with 20 mm dia medium grade pipe for watering, 40 mm dia light grade GI pipe for lead protection in & including alternate layers of charcoal dust and common salt complete all as shown in electrical plate No 3 of SSR Part-1(2009) connected to earthing test point including testing on completion and taking down old u/s earthing complete all as specified and directed. NOTE: (i) The earth chamber shall be constructed 0.50m away from the edge of earth pit and the cost of the same is deemed to be included in quoted unit rate. (ii) GI Strip and protection pipe upto 7.5m is deemed to be included in the quoted unit rate. (iii) GI watering pipe upto 1.2m s deemed to be included in the quoted unit rate. | 80 | Each Job | 7,099 ₹5,67,920 | 6,671 ₹5,33,680 | 6,300 ₹5,04,000 Lowest | 7,083 ₹5,66,640 | 7,131 ₹5,70,480 |
| 1.02 | S&F 25x4mm galvanised iron strip as Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed on wall with porcelain insulator with proper fixing nut and bolt with washer or any other indicated situation for loop earthing etc. as required including taking down old earth condunity conductor of any type & size complete all as specified and directed. | 650 | RM | 179 ₹1,16,350 | 161 ₹1,04,650 | 130 ₹84,500 Lowest | 211 ₹1,37,150 | 183 ₹1,18,950 |
| 1.03 | M&L for earthing complete with copper earth plate electrode of 60 cm x 60 cm x 3.15 mm size, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to copper strip of size 20 mm x 3.15 mm as fixed on wall with porcelain insulator with proper fixing nut and bolt with washer laying through light grade galvanized iron pipe of 40 mm diameter, connected to earthing test point, all as shown in electrical plate No.5 connected to earthing test point including testing on completion and including excavation in any type of soil, earthwork, PCC earth pit of dimensions 550 mm X 550 mm (outer) and 300 mm X 300 mm (inner) and 250 mm deep, with a 10 mm thick CI cover, hinged to CI frame on ground level, GI watering pipe, funnel, etc. connected to earthing test point including testing on completion and taking down old u/s earthing complete all as specified and directed. Notes: (i) The cost of earth continuity conductor with GI pipe 40mm medium grade upto 7.5m is deemed to be included in r/o above item. (ii) The earth resistance value should not be more than 2 Ohm. (iii) Earth test report shall be submitted by contractor. If the earth resistance value is more than 2 Ohm new earthing will be done by contractor as replacement and no payment shall be mate for it. (iv) The earth chamber to be constructed 0.5m from edge of earth pit with necessary watering arrangement. The cost for the same is deemed to be included in above item | 40 | Each Job | 15,999 ₹6,39,960 | 15,673 ₹6,26,920 | 14,500 ₹5,80,000 Lowest | 15,791 ₹6,31,640 | 16,037 ₹6,41,480 |
| 1.04 | S&F 20 x 3 mm copper strip as earth contuinity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed on wall with porcelain insulator with proper fixing nut and bolt with washer or any other indicated situation for loop earthing etc. as required including taking down old earth condunity conductor of any type & size complete all as specified and directed. | 850 | RM | 439 ₹3,73,150 | 417 ₹3,54,450 Lowest | 420 ₹3,57,000 | 444 ₹3,77,400 | 433 ₹3,68,050 |
| 1.05 | S&F in repairs Test point terminal block for earthing in the plant made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw complete all as specified and directed. | 95 | Each | 679 ₹64,505 | 667 ₹63,365 Lowest | 800 ₹76,000 | 677 ₹64,315 | 681 ₹64,695 |
| 1.06 | S&F in repairs powder coated sheet metal MCCB enclosure, wall mounted of mimnimum size 300 x 300 x 300mm, factory made, MS sheet minimum thicknes 1.2mm with and inculding polyurethene gasket and cam locks suitable for fixing MCCB of any type & capacity including taking down old unservicable complete all as specified and directed | 25 | Each Job | 1,399 ₹34,975 | 1,337 ₹33,425 Lowest | 1,700 ₹42,500 | 1,363 ₹34,075 | 1,463 ₹36,575 |
| 1.07 | S&F in repairs Double door MCB DB made out of 18SWG CRCA steel sheets, Phosphate powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal Blocks for incoming and outgoing circuits, inbuilt loose wire box, Ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection, SP, 240 volts 200 Amps rated bus bar, 12 way including taking down old unservicable complete all as specified and directed | 18 | Each | 1,969 ₹35,442 | 1,961 ₹35,298 | 1,700 ₹30,600 Lowest | 1,963 ₹35,334 | 2,027 ₹36,486 |
| 1.08 | S&F in repairs Double door MCB DB made out of 18SWG CRCA steel sheets, Phosphate powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal Blocks for incoming and outgoing circuits, inbuilt loose wire box, Ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection, SP, 240 volts 200 Amps rated bus bar, 4 way including taking down old unservicable complete all as specified and directed. | 18 | Each | 1,349 ₹24,282 | 1,337 ₹24,066 | 1,200 ₹21,600 Lowest | 1,351 ₹24,318 | 1,377 ₹24,786 |
| 1.09 | S&F in repairs 6 to 32 AMP MCB single pole 240 V 10 KA (C-Series) including taking down old unservicable complete all as specified and directed. | 80 | Each | 289 ₹23,120 | 273 ₹21,840 | 250 ₹20,000 Lowest | 287 ₹22,960 | 293 ₹23,440 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
17 Nov 2025, 6:00 pmClosed
GE NW KARANJA
NAVAL STATION KARANJA, URAN, RAIGAD, MAHARASHTRA
REP REPLACEMENT AND IMP OF EARTHING OF ALL LIFT AND COMMON AREA PLANT MACHINERIES AND INCOMING MCB DBS INCLUDING MCCBS MCBS CONTACTORS ARMOURED CABLES TIMERS INTERNAL WIRINGS INCLUDING FITTING FIXTURE SWITCHES SECURITY LIGHTS UNDER GE NW KARANJA
2025_MES_737393_1
8225/E8
Open Tender
Civil Works
Item Rate
240 days
GE NW KARANJA
D and above b i
8 documents required · 8 mandatory
₹500
Yes
GE NW KARANJA
₹90,000
Yes
3 Jan 2026
28 Oct 2025
19 Nov 2025
28 Oct 2025
17 Nov 2025
10 Nov 2025
Amount
Notes : - (i) The is at Serial No.120 of TPP 2025-26 (ii) Please refer schedule 'A' notes before quoting the tender. (iii) Amount of Schedule of Credit shall be deducted off line by the department.
M&L for earthing with GI earth plate electrode of size 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below the normal ground level connected with GI strip 25 x 4 mm by means of bolts, nuts, check nuts & washers of galvanished iron steel including fixed on wall with porcelain insulator with proper fixing nut and bolt with washer and necessary excavation and earth work in any type of soil, removing surplus soil to a distance not exc 50 m, with and including PCC chamber in PCC (1:2:4) , type B1 using (20 mm graded stone aggregate) mild steel angle iron frame made out of MS angle iron of size 40x40x6 mm thick duly painted with two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer hinged with and including 6mm thick CI cover with handle, watering arrangement with funnel internally secured with wire mesh with 20 mm dia medium grade pipe for watering, 40 mm dia light grade GI pipe for lead protection in & including alternate layers of charcoal dust and common salt complete all as shown in electrical plate No 3 of SSR Part-1(2009) connected to earthing test point including testing on completion and taking down old u/s earthing complete all as specified and directed. NOTE: (i) The earth chamber shall be constructed 0.50m away from the edge of earth pit and the cost of the same is deemed to be included in quoted unit rate. (ii) GI Strip and protection pipe upto 7.5m is deemed to be included in the quoted unit rate. (iii) GI watering pipe upto 1.2m s deemed to be included in the quoted unit rate.
S&F 25x4mm galvanised iron strip as Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed on wall with porcelain insulator with proper fixing nut and bolt with washer or any other indicated situation for loop earthing etc. as required including taking down old earth condunity conductor of any type & size complete all as specified and directed.
M&L for earthing complete with copper earth plate electrode of 60 cm x 60 cm x 3.15 mm size, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to copper strip of size 20 mm x 3.15 mm as fixed on wall with porcelain insulator with proper fixing nut and bolt with washer laying through light grade galvanized iron pipe of 40 mm diameter, connected to earthing test point, all as shown in electrical plate No.5 connected to earthing test point including testing on completion and including excavation in any type of soil, earthwork, PCC earth pit of dimensions 550 mm X 550 mm (outer) and 300 mm X 300 mm (inner) and 250 mm deep, with a 10 mm thick CI cover, hinged to CI frame on ground level, GI watering pipe, funnel, etc. connected to earthing test point including testing on completion and taking down old u/s earthing complete all as specified and directed. Notes: (i) The cost of earth continuity conductor with GI pipe 40mm medium grade upto 7.5m is deemed to be included in r/o above item. (ii) The earth resistance value should not be more than 2 Ohm. (iii) Earth test report shall be submitted by contractor. If the earth resistance value is more than 2 Ohm new earthing will be done by contractor as replacement and no payment shall be mate for it. (iv) The earth chamber to be constructed 0.5m from edge of earth pit with necessary watering arrangement. The cost for the same is deemed to be included in above item
S&F 20 x 3 mm copper strip as earth contuinity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed on wall with porcelain insulator with proper fixing nut and bolt with washer or any other indicated situation for loop earthing etc. as required including taking down old earth condunity conductor of any type & size complete all as specified and directed.
S&F in repairs Test point terminal block for earthing in the plant made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw complete all as specified and directed.
S&F in repairs powder coated sheet metal MCCB enclosure, wall mounted of mimnimum size 300 x 300 x 300mm, factory made, MS sheet minimum thicknes 1.2mm with and inculding polyurethene gasket and cam locks suitable for fixing MCCB of any type & capacity including taking down old unservicable complete all as specified and directed
S&F in repairs Double door MCB DB made out of 18SWG CRCA steel sheets, Phosphate powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal Blocks for incoming and outgoing circuits, inbuilt loose wire box, Ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection, SP, 240 volts 200 Amps rated bus bar, 12 way including taking down old unservicable complete all as specified and directed
S&F in repairs Double door MCB DB made out of 18SWG CRCA steel sheets, Phosphate powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal Blocks for incoming and outgoing circuits, inbuilt loose wire box, Ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection, SP, 240 volts 200 Amps rated bus bar, 4 way including taking down old unservicable complete all as specified and directed.
S&F in repairs 6 to 32 AMP MCB single pole 240 V 10 KA (C-Series) including taking down old unservicable complete all as specified and directed.
S&F in repairs 6 to 32 AMP MCB SPN 240 V 10 KA (C-Series) including taking down old unservicable complete all as specified and directed.
S&F in repairs 40 to 63 AMP MCB SPN 240 V 10 KA (C-Series) including taking down old unservicable complete all as specified and directed.
S&F in repairs RCBO DP 240V 50Hz 300 mA, 16 to 32 Amps confirming to relevent IS for earth leakage protection including taking down old unservicable complete all as specified and directed.
S&F in repairs RCCB 240V 50Hz 300 mA, 40 Amp, suitable for lifts confirming to relevent IS for earth leakage protection including taking down old unservicablecomplete all as specified and directed.
S&F in repairs RCCB 240V 50Hz 300 mA , 63 Amp, suitable for lifts confirming to relevent IS for earth leakage protection including taking down old unservicablecomplete all as specified and directed.
S&F in repairs MCCB TPN, 415 Volts, 50 Hz, 16 KA conforming to IS 8828 of rating 63 Amp including taking down old unservicable complete all as specified and directed.
S&F in repairs MCCB TP, 415 Volts, 50 Hz, 16 KA conforming to IS 8828 of rating 63 / 100 Amp including taking down old unservicablecomplete all as specified and directed.
S&F in repairs MCCB TP, 415 Volts, 50 Hz, 36 KA conforming to IS 8828 of rating 160 Amp including taking down old unservicablecomplete all as specified and directed.
S&F in repairs MCCB 3 Pole , 415 Volts, 50 Hz, 36 KA conforming to IS 8828 of rating 250 Amp including taking down old unservicablecomplete all as specified and directed.
S&F in repairs MCCB 4 Pole , 415 Volts, 50 Hz, 36 KA conforming to IS 8828 of rating 63/100 Amp including taking down old unservicable complete all as specified and directed.
S&F in repairs MCB TP, 415 Volts, 50 Hz, 10 KA conforming to IS 8828 of rating 25-63 Ampincluding taking down old unservicable complete all as specified and directed.
S&F in repairs MCB TPN, 415 Volts, 50 Hz, 10 KA conforming to IS 8828 of rating 16-32 Amp including taking down old unservicable complete all as specified and directed.
S&F in repairs MCCB TP, 415 Volts, 50 Hz, 25 KA conforming to IS 8828 of rating 100 Amp including taking down old unservicable complete all as specified and directed.
S&F in repairs MCCB TP, 415 Volts, 50 Hz, 36 KA conforming to IS 8828 of rating 160 Amp including taking down old unservicable complete all as specified and directed.
S&F in repairs MCCB 3 Pole , 415 Volts, 50 Hz, 36 KA conforming to IS 8828 of rating 250 Amp including taking down old unservicablecomplete all as specified and directed.
S&F in repairs MCCB 4 Pole , 415 Volts, 50 Hz, 36 KA conforming to IS 8828 of rating 250 Amp including taking down old unservicable complete all as specified and directed.
S&F in repairs MCCB 4 Pole , 415 Volts, 50 Hz, 36 KA conforming to IS 8828 of rating 400 Amp including taking down old unservicablecomplete all as specified and directed.
Supply, laying, testing & commissioning 1100 volts grade, 4 core, 25 sq mm cross-sectional area XLPE, armoured, electric power cables (heavy duty) with aluminium conductor laid in trenches or fixing on wall or passing through pipe or in cable ducts, including taking out old cable, any type complete all as specified and as directed.
Supply, laying, testing & commissioning 1100 volts grade, 3.5 core, 35 sq mm cross-sectional area XLPE, armoured, electric power cables (heavy duty) with aluminium conductor laid in trenches or fixing on wall or passing through pipe or in cable ducts, including taking out old cable, any type complete all as specified and as directed.
Taking down and dismantling existing street Light/ Flood Light / post lantern / tube light fittings, any type, any wattage for repair or replacement of burnt /worn out accessories and refixed in position after repair complete all as specified and directed. Note :- (i) Accessories only wherever required shall be measured and paid seperately as supply only. (ii) Labour charges for taking down and repair including minor spares like nuts, bolts , insulation materials & cleaning of area upto one mtr around the street light/ building lights/ Poles is deemed to be included in the quoted unit rate .
Supply, fixing, connecting and testing in replacement integral LED Street light fitting, 60 watts energy saving & environmental friendly long life versatile pressure die cast aluminium body with clear toughened glass with over voltage protection, short circuit protection, open circuit protection, surge protection, LED CCT is 5700 K and IP-66 as light source suitable making connection with three core PVC insulated and sheathed copper conductor cable of size 1.5/2.5 Sqmm complete all as specified and directed .
S&F in repairs LED batten with 20W LED tube light in wall/surface connecting with all required accessories like PVC box base, flexible cable from ceiling rose etc Surface and wall mounted LED batten, Engineering plastic batten complete all as specified and directed.
S&F in repairs LED light fitting 1 x 10W bulkhead luminaires including LED bulb, holder connecting up with three core flexible copper conductor cable complete all as specified and directed.
S&F for street light bracket 1.5 mtr long made out of 50mm dia light grade GI tube one and duly welded with 100mm dia 30 cm long GI tube including provision of 4 Nos holes duly threaded for fixing the bracket on the top of existing poles with complete including arrangment of threding and weldeding work required for fixing of street light fitting complete including taking down U/S bracket complete all as specified and directed.
Taking down carefully copper /aluminium point wiring (light, fan socket or power) through stove enamelled steel conduit/pvc conduits including complete fittings such as switches, ceiling roses, pendants, regulators, sockets, switch sockets, electrical fittings etc removing and making good disturbed surfaces of walls/ceiling etc, complete all as specified and directed.
M&L for point wiring fo light/fan/bell point controlled by 1 one way switch using 1.5 Sqmm single core, multi stranded copper conductor 1100 V grade, ISI marked, PVC insulated unsheathed cable (with approved colour code) FRLSH cable drawn in & including PVC casing caping (ISI marked) of 25 mm wide double locking type including all accessories with & including PVC 1.5 Sqmm multi stranded insulated unsheathed FRLSH copper wire, ISI marked of green colour for continous earth, including sunken box made out of suitable thickness and not less than 60 mm in depth GI/MS/ prssed steel terminal box to be concealled in wall, duly painted including 3mm hylum /masonite sheet cover, for mounting of fittings like switches, sockets, fan regulators etc. fixed with galvanised screw and cup washer complete all as specified and directed. Note : Wiring to be done as per approved colour code.
All as per BoQ Serial Item no.1.35 above but one 5 amp socket point on same board.
All as per BoQ Serial Item no.1.35 above but one 5 amp multi socket indepenedent
S&F switch piano flush button single pole one way, 5 Amp (ISI marked) complete all as specified and directed.
S&F switch socket 2 in 1, 3 pin, 5 Amp flush type (ISI marked) complete all as specified and directed.
S&F ceiling rose PVC/polycarbonate, isolated body surface Bakelite 65mm dia three terminals complete all as specified and directed.
M&L for Sub main wiring with two runs of single core PVC insulated unsheathed cable 1100 volts grade, multistranded copper conductor FRLSH cable of 6.0 Sqmm (with colour code), drawn in but including non metallic rigid PVC conduit of 25mm dia/casing capping/suitable size, ISI marked including one run of PVC insulated unsheathed, multistranded copper conductor FRLSH cable of 6.0 Sqmm (Green colour) as contineous earth conductor cable connected to earth dolly in surface/ recess complete including taking down complete all as specified and as directed. Note :- 3 run of 6 Sqmm and one run of casing caping shall be measured as one Unit.
S&F in repairs power contactor, 3 pole, type MNX 12, 1NO + 1 NC aux contracts with standard coil voltage 240 volts, rating 30 Amp (of equivalent make AC plant machineries) including taking down old unservicable complete all as specified and directed.
S&F in repairs power contactor 3 pole, type MNX 18, 1NO + 1 NC aux contracts with standard coil voltage 240 volts, rating 30 Amp (of equivalent make AC plant machineries) including taking down old unservicable complete all as specified and directed.
S&F in repairs power contactor 3 pole, type MNX 22 or 25 , 1NO + 1 NC aux contracts with standard coil voltage 240 volts, raring 30 Amp (of equivalent make AC plant machineriest) including taking down old unservicable complete all as specified and directed.
S&F in repairs power contactor 3 pole, type MNX 32 , 1NO + 1 NC aux contracts with standard coil voltage 240 volts, rating 30 Amp (of equivalent make AC plant machineries) including taking down old unservicable complete all as specified and directed.
S&F in repairs power contactor 3 pole, type 1 NO/NC (Normal open/Normal Close) 65 Amps with standard coil voltage 415 volts (of equivalent make AC plant machineries) including taking down old unservicable complete all as specified and directed.
S&F in repairs power contactor 3 pole, 18 Amps Power contactor Lc1D18M7 for CT fan motor (of equivalent makeAC plant machineries) including taking down old unservicable complete all as specified and directed.
S&F in repairs power contactor 3 pole, 15 Amps Power contactor (of equivalent make AC plant machineries) including taking down old unservicable complete all as specified and directed.
Supply and connecting Single core PVC insulated multistranded 1100 volt grade copper conductor cable of size 2.5 sqmm single runs drawn through existing pipes/ Floor/trench/wall including taking down old unservicable complete all as specified and directed.
Supply and connecting Single core PVC insulated multistranded 1100 volt grade copper conductor cable of size 4.0 sqmm single runs drawn through existing pipes/ Floor/trench/wall including taking down old unservicable complete all as specified and directed.
Supply and connecting Single core PVC insulated multistranded 1100 volt grade copper conductor cable of size 6.0 sqmm single runs drawn through existing pipes/ Floor/trench/wall including taking down old unservicable complete all as specified and directed.
Supply and connecting Single core PVC insulated multistranded 1100 volt grade copper conductor cable of size 10.0 sqmm single runs drawn through existing pipes/ Floor/trench/wall including taking down old unservicable complete all as specified and directed.
Supply and connecting Single core PVC insulated multistranded 1100 volt grade copper conductor cable of size 16.0 sqmm single runs drawn through existing pipes/ Floor/trench/wall including taking down old unservicable complete all as specified and directed.
R A Electric Co. (BID ID -3475518)
Sagar Electricals (BID ID -3475853)
M.K Enterprises (BID ID -3474274)
venus enterprises (BID ID -3476505)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.39 MB
BOQ_825662.xls
BOQ • 1.07 MB
Tenderpages8225.pdf
Tender Documents • 3.27 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .