Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | LI₹37.0 LAccepted-AOC | LI | Accepted-AOC accept | |
| 2 | LII₹37.1 LRejected-AOC | LII | Rejected-AOC accept | |
| 3 | Rejected-Technical | - | Rejected-Technical not responsive | |
| 4 | Rejected-Technical | - | Rejected-Technical not responsive | |
| 5 | Rejected-Technical | - | Rejected-Technical not responsive |
Tender Value
₹35.4 L
EMD Value
₹70,875
Closing Date
27 Jul 2023, 2:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Superintending Engineer, PWD Dibrugarh Building Ci
Superintending Engineer, PWD Dibrugarh Building Circle, Dibrugarh
Part I Construction of garage with Driver Qtr. Judicial Court, Margherita for the year 2022-23
2023_PWBNH_31696_1
SE(B)/DIB/CS-04/23-24/335-A
Open Tender
Civil Works - Building
Item Rate
240 days
Margharita Judicial court
Please refer Tender documents.
6 documents required · 6 mandatory
₹709
₹70,875
Yes
Superintending Engineer, PWD Dibrugarh Building Ci
24 Sept 2023
17 Jul 2023
27 Jul 2023
17 Jul 2023
27 Jul 2023
17 Jul 2023
17 Jul 2023
Amount
Earth work in excavation by mechanical means (Hydralic excavator) / manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
Dry brick pitching half brick thick in drains including supply of bricks and preparing the surface complete : With common burnt clay F.P.S. 9non modular) bricks of class designation 7.5
Providing and laying in position ready mixed or site batched design mix cement concrete for plain cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/Ordinary Portland / Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelarate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering and finishing as per direction of the engineer-in-charge; for the following grades of concrete. Note : Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the minimum specified cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. All works upto plinth level Concrete of M10 gr. with minimum cement content of 220kg/cum.
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Cold twisted bars.
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars.
Centering and shuttering including strutting, propping etc. and removal of form for Foundation, footings, bases of columns, etc. for mass concrete
Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and struts
Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers
Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform
Centering and shuttering including strutting, propping etc. and removal of form for Stairs, ( excluding landing) except spiral-staircases
Centering and shuttering including strutting, propping etc. and removal of form for Weather shade, Chajjas, corbels etc. including edges
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 ( 1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20mm nominal size derived from natural sources).
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15⁰ landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 ( 1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20mm nominal size derived from natural sources).
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in : Cement mortar 1:4 ( 1 cement : 4 coarse sand).
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 ( 1 cement : 2 coarse sand (Zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources).
Excavating, supplying and filling of local earth ( including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in super structure above plinth level upto floor V level. Cement mortar 1:4 ( 1 cement : 4 coarse sand).
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings/ wooden frames with rawl plugs screws etc.
15mm cement plaster on rough side of single or half brick wall of mix : 1:4 ( 1 cement : 4 coarse sand)
12mm cement plaster of mix : 1:4 ( 1 cement : 4 coarse sand).
Providing and fixing angle iron frames for doors, windows and ventilators of mild steel angle sections of size 35x35x5mm, joints mitred and welded by angle iron 35x35x5mm or 35x5mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge.
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size, with top and bottom rail of T-iron 40x40x6mm, with 40mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS:4454- part I and M.S. top cover of required thickness for rolling shutters. 80x1.25mm M.S. laths with 1.25mm thick top cover.
Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Kiln seasoned and chemically treated hollock wood.
Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. a)Kiln seasoned and chemically treated hollock wood. i)35mm thick.
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part-I) non decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters : 35mm thick including ISI marked stainless steel butt hinges with necessary screws.
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes.
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0mm thick glass panes.
Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3mm and nuts & bolts complete. Galvanised M.S. wire gauze with 0.63mm dia wire and 1.4mm aperture on both sides
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50mm (+0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling / self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal / vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50mm (+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS : 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling / self tapping screws complete : Ridges plain (500 - 600mm).
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50mm (+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS : 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling / self tapping screws complete : Barge board ( upto 300mm)
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50mm (+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS : 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling / self tapping screws complete : Gutter ( 600mm over all girth)
Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc. Kiln seasoned and chemically treated hollock wood.
Cement plaster skirting up to 30 cm height, with cement mortar 1:3 ( 1 cement : 3 coarse sand), finished with a floating coat of neat cement. 18mm thick
Providing and fixing plain multipurpose cement board (High pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid separately). 6mm thick cement bonded wood particle board as per IS:14276
Providing and laying Vitrified tiles in floor in different sizes ( thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, laid on 20mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand) joining with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size Size of Tile 600 x 600mm.
Providing and fixing 1st quality Ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting risers of steps and dados over 12mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and joining with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work ( two or more coats) over and including water thinnable priming coat with cement primer.
Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications : Painting wood work with deluxe Multi Surface paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.75 ltr/10 sqm of approved brand and manufacture.
Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications : Painting steel work with deluxe Multi Surface paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture.
Providing and fixing Fiber Glass Reinforced plastic (FRP) door frames of cross section 90mm x 45mm having single rebate of 32mmx15mm to receive shutter of 30mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15 x 15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5mm thick heat moulded PVC 'C' channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45 degree angle on both side forming styles and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10mm (5mm x 2) thick, 20mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7mm (5mm + 2mm) thick x 15mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-Charge, manufacturer's specification & drawing. 30mm thick plain PVC door shutters.
Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing Cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440mm with intergral type foot rests.
Providing and fixing soil, waste and vent pipes : 100mm dia Sand cast iron S&S pipe as per IS : 1729
Providing and fixing bend of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete. 100mm dia. Sand cast iron S&S pipe as per IS : 3989
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in charge. External work 32mm nominal dia pipes.
Constructing masonry Chamber 30x30x50cm inside, in brick work in cement mortar 1:4 ( 1 cement : 4 coarse sand) for stop cock, with C.I. surface box 100x100x75mm ( inside ) with hinged cover fixed in cement concrete slab 1:2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size) and inside plasteing with cement mortar 1:3 ( 1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
Wiring for light point/ fan point / exhaust fan point / call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group A
Group B
Group C
Wiring for light / power plug with 2x4 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit alongwith 1 No. 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A Switch
3 pin 5/6 A socket outlet
Supplying and fixing two module stepped type electronic fan regulator on the existing midular plate switch box including connections but excluding modular plate etc. as required.
Supplying and fixing following size / modules, AGI box alongwith modular base & cover plate for modular switches in recess etc. as required. 4 Module ( 125mmx75mm)
6 Module (200mmx75mm)
8 Module (125mmx125mm)
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS OVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required. 2x2.5 sq.mm + 1x2.5 sq.mm earth wire
2x6 sq.mm + 1x6 sq.mm earth wire
Supplying and fixing brass batten / angle holder including connection etc. as required.
Supplying and fixing call bell / buzzer suitable for single phase, 230 V, complete as required.
Supplying and fixing suitable size GI box with modular plate cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular Switch, connection etc. as required.
Supplying and fixing suitable size GI box with modular plate cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular Switch, connection etc. as required.
Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in Cubical Panel, making connections, etc. as required. 32 A TP&N
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240V, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). 8 way, Double door
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10KA, 'C' curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single Pole
Double pole
Supplying and fixing following rating, double pole, 240V, isolator in the existing MCB DB complete with connections, testing & commissioning etc. as required. 40 A
Earthing with G.I. Earth pipe 4.5 metre long, 40mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal / coke and salt as required.
Providing and fixing 6 SWG dia G.I. Wire on surface or in recess for loop earthing as required.
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Upto 120 sq.mm
Supplying, fitting, fixing of LED Street light uminaries with all accessories including connection etc. complete as per direction of the etc.
Supply including fitting, fixing of LED Tube Light 4 Ft. 20W 6500K, MAGIK make CAT No.BWUA020W1295 as directed & specified by the
Supply including fitting, fixing of A.C. Ceiling fan with all accessories like down rod, canopy etc. as directed & specified by the deptt. (HAVELLS make) of MODEL-SS-390 METALIC 1200mm Sweep.
Supply including fitting, fixing of A.C. Exhaust fan of 300mm Sweep in the existing hole including connections & making good damage done, complete as directed & specified by the deptt. (HAVELLS make) of MODEL - Ventil air- DSP METALLIC RANGE 300mm Sweep.
Supplying of following sizes XLPE insulated and PVC sheathed aluminium conductor armored power cable of 11 KV grade conforming to IS 7098(Part-1)/ 1988 with ammendment upto date etc. as required. 2x6 sq.mm
M/S PAPORI ENTERPRISE
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .