SPL REPAIR TO BLDG NO WB-4A AND PROVN OF RAIN AND SUN PROTECTION SHED AT AA WING AND CEILING FAN AND EXHAUST FAN IN BLDG NO WB-356D, 356E AND WB-205 AND 208 IN AIR FD AREA UNDER GE (MCTE) MHOW

Amount

B/R WORK

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified.

M&L for Vitrified tiles 8-10mm thick light shade (square/ rectangular) polished, area of each tiles exc 0.42 Sqm not exceeding 1.00 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in CM 1:6 complete all as specified.

M&L for Vitrified tiles 8-10mm thick light shade (square/ rectangular) polished, area of each tiles exc 0.42 Sqm not exceeding 1.00 sqm, on vertical surfaces such as in skirting over & including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in CM 1:6, complete all as specified.

Demolition of stone slabs of any description or thickness in floors/ walls laid bedded and pointed in any mortar etc. including complete removal of debris outside MD land. complete all as specified

M & L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over & including 15mm thick screed bed in CM 1:6, complete all as specified

M & L for Machine cut kota stone slab flooring 20-25mm thick on vertical surfaces such as skirting over & including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified.

S&F in repair 25mm bore SS Pipe curtain rods including SS Brackets & SS Decorative dome, suitable for door/ widows curtain with fancy type powder coated SS dooms with ss brackets fitted to each end and fixed to wall incl. removal of existing rod and making good etc complete all as specified.

M&L for applying one coat of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface. complete all as specified.

M&L for applying one coat of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface, complete all as specified.

Taking up or down 20mm bore steel tubing and connections, including cleaning for re-fixing complete all as specifed

S&F, laying and testing for 20mm bore GI tubing medium grade galvanised steel tubing including all fittings such as union, reducer, sockets, reducing bends elbows tee, checknuts, caps, plugs etc fixed to wall and ceilling or laid in floors complete all as specifed.

Refixing only old 20mm bore GI tubing and connection in new or old position (wall, floor, wall etc) complete all as specifed.

Dismantling PVC water tanks 1000 litres capacity complete all as specifed.

S&F rotational moulded polyethylene water storage tanks of capacity 1000 litres (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I. complete all as specifed

S&F in repair 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specifed

Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys, scrubbing down with water etc, complete all as specified.

M&L for Rendering 15mm thick on fair faces of concrete/ brick interior surfaces in cement mortar (1:6) finished fair and even without using extra cement complete all as specified and directed.

M&L for preparation of new surfaces of plastered of walls and applying two coat of distemper oil emulsion incl priming the surface and incl two coat of wall putty all as directed.

M&L for complete removal of existing surface and preparation of old surfaces of plastered of walls and applying Two coat of distemper oil emulsion incl priming the surface over and incl two coat of wall putty all as directed.

M&L for Rendering 10mm thick on fair faces of concrete surface of ceiling, chajja in CM 1:3, surface finished even and surface without using extra cement complete all as specified and directed.

M&L for Preparation of Newly plastered surface and applying three coats of white wash on Ceiling complete all as specified and as directed.

M&L for Rendering 15mm thick on fair faces of concrete/ brick exterior surfaces in cement mortar 1:4, finished fair and even without using extra cement complete all as specified and directed.

M & L for complete removal of existing surface and applying two coats exterior weather coat over one coat of exterior primer over etc complete all as specified.

M & L for applying two coats exterior weather coat over one coat of exterior primer including preparation of surfaces of new walls over a coat of wall putty etc complete all as specified.

Taking down chowkats of any description without taking of shutter from the frame exceeding 1.5 sqm but not exc. 4.0 sqm each complete all as specified

Taking down chowkats or frame of any description n.exc. 1.5 Sqm each (without taking off shutters from the frames) & remove off the premises complete all as specified.

S& F glazed (5.0mm thick plain/ coloured glass) aluminum door powder coated consisting of frame of 63mm x 38mm size with shutter fixed on frame both side openable on pivotal arrangement with including necessary cutting holes in wall & floor Door shutter consists of top rail size is 83mm x 44mm, bottom rail & lock rail size is 110mm x 44mm & style of door shutter is 83mm x 44mm with handles 2 Nos in each door, hinges has fitted on frame as required fixed with rubber gasket & aluminum beading any No of panels with aluminum handle, locking arrangement, floor spring and floor door stopper incl, necessary jointing cleats, glazing clips etc complete (Al. section thickness 2mm) confirming to IS. complete all as specified.

S&F glazed 12mm thick toughened glass with frosted film as in door, including Stainless Steel handles not less than 200mm long-02 Nos, Floor door spring capable to bear the load/ movement of toughened glass door and suitable locking arrangement locks and all necessary fittings & itching work/ flim pasting over glass door complete all as specified.

Dismantling/ wall and ceiling boards (fibre pulp, insulation etc) or insulation boards/ slabs, complete all as specified

M&L for suspended false ceilling comprising of 4mm thick non asbestos fibre cement bulding boards of size 595mm x 595mm, fixed or laid/inserted to powder coated GI frame work with screws over GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to sourrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fastners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm center to centre including hangers 4mmm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40mm x 3mm size 60mm long complete all as specified and directed. Make : Everest (Lake and Hill) or equivalent approved.

Demolition of cement concrete unreinforced in Ground floor & paving n.exc 15cm thickness and removal of debris from site all as specified and directed.

M&L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in mass concrete as in foundation filling and mass concrete complete all as specified and directed.

M&L for Cement concrete type B-0 (1:2:4) using 12.5mm graded stone aggregate 25mm thick finished surface rough to receive tiling all as specified and directed.

Demolition of brick work built in cement mortar in any position and removing rubbish off the premises within 50m complete all as specified

M &L for Brickwork with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in Cement mortar 1:6 complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise described complete all as specified and directed

S&F mild steel framed work such as grills, gratings, gates etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; angle framed work and similar works complete all as specified .

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings etc. complete all as specified and directed.

Dismantling existing damaged steel sheet ridge/ hip for corrugated or semi corrugated sheets from roof and taking down carefuly complete all as specified

S&F Pre-painted galvalume aluminium zinc coating GI based profile pattern precoated coloured steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa, hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon and finished with resin coat on both surfaces @ 150 gm/sqm of coating (total both surfaces) as in roof covering/ cladding to wall, including flashings, ridges, valley etc fixed with self tapping screws as specified.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa, hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon and finished with resin coat on both surfaces @ 150 gm/sqm of coating (total both surfaces) as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

M&L for closing bolt holes etc, in old corrugated steel sheets or Aluminium sheeting by sealing with one bitumen and one curved GI washer on either side and 6mm G.I. bolts and nuts, all set in stiff white lead, bolt n exc 25mm in length complete all as specified and directed.

Hacking out old broken glass (any tickness, size, quality or description) from wooden/ steel framesglazed with oil putty or fixed with beads complete all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth, 0.46mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete including necessary wooden beading all around and as necessary, all as specified and directed.

S & F of Powder coated aluminum three track sliding shutters two Glazed shutters and one guazed shutters(with wire mesh), each shutter width one half of the length of window with the following specifications and making good the adjacent surfaces. (i) Three way track for sliding shutters of cross section 91.80mm x 31.75mm x 1.30mm thick. (ii) Sliding shutter frame of cross section 40mm x 18mm x 1.30mm. (iii) Aluminium glazing strip of size 18.2 x 16.66mm. (iv) 4 to 5mm thick float glass superior quality make Modi float for two shutters. (v) IDPE rubber gasket for fixing glass. (vi) Locking cleat per shutter -01 No. (vii) Two nos sliding rollers per shutter. (viii) Rubber shock absorber 03 No per shutter. (ix) Aluminium wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm for one shutter. (x) Fixing screws for frame with wall - 06 No per window.

S&F 2nd class hardwood plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounder or chamfered, put together with glue pinned at joints, complete all as specified.

S&F 30mm thick 2nd class HW glazed and skeleton shutters open rebated and prepared to receive glass gauge etc (w/o sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc, size of member of shutter for windows, ventilators, etc. are provided with stiles and rails as specified in SSR Part-I, section 8, clause 8.20 (b) supplied & fitted to chowkats complete all as specified.

M&L for preparation of new wooden surfaces of any description, not otherwise described over 10cm width or girth applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

S&F 10mm thick poly carbonate sheet plain or corrugated sheeting as in roof covering/ cladding to wall, fixed with self tapping screws as specified:- (any height of bldg) complete all as specified.

S&F of structural steel work as in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified.

M&L for rolled section/ hollow tube section as in post, main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecction plates including drilling hole for bolting, connecting to gusset plate etc complete all as specified and directed by Engineer-in-charge.

S&F of structural steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified.

S&F MS plates (plain or chequered) channels square cut to or notched forming holes with riveted bolted or welded attachment for Fe-410W complete all as specified.

S&F Mild steel screw bolts (machine made) with hexagonal/ square heads at one end & screwed the other/ screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut, length of bolt exc 22.5cm & n exc 30cm long dia of shank 16 to 20mm. complete all as specified.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified.

M & L for Providing cement concrete 1:2:4 type B-1 (using 20mm graded stone aggt) as in coping, apex stone, bed plate, kerbs including weathering, slightly rounded or chamferred angles and throating and incl. necessary form work etc complete all as specified.

E/M WORK

Taking down carefully copper/ alluminium point wiring (light, fan, sockets or power) complete including all fitings and fixtures such as switches, sockets, ceiling roses, pendens, rgulators, light fittings etc, removing matrials to store for taking credit and making good disturbed surfaces complete all as specified and directed.

Taking down carefully copper/ aluminium sub-main wiring any type and making good the disturbed surface of walls and floors etc complete all as specified

Taking down ceiling fan/ exhaust fan/ of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of AGE E/M No-III Mhow and refixing the same after completion of work including overoiling and painting work complete all as specified.

Taking down carefully TPN DB/ SPN DBs/ sheet metal earth plug socket any size and any type including MCBs any type and making good the disturbed surface of walls and floors etc complete all as specified.

Taking down existing Earthing complete all as specified.

Taking down existing existing light fitting complete all as specified.

Taking down existing old unserviceble LT UG/ service cable of any descrition and size complete all as specified.

Point wiring with 1.5 Sqmm (nominal cross sectional area), single core, PVC insulated with multistranded PVC unsheathed FRLSH copper conductor cable in and including rigid non- metallic PVC concealed conduit of suitable size medium grade ISI marked complete, including one continuity earth wire of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area) FRLSH copper conductor connected to all fittings, common earth and connected to earth dolly including modular metal flush box, modular cover plate and modular cover frame of suitable size all fittings and accessories and making good disturbed surface of walls and floors etc. complete all as specified and directed for the following:-

(a) One light/ fan/ bell controlled by one, one way switch 5/6 Amps complete all as specified

(b) One 3 pin, 5/6 Amps socket outlet point on independent board controlled by one, one way 5/6 amps switch complete all as specified

(c) One 3 pin, 5/6 Amps socket outlet point on SAME BOARD controlled by one, one way 5/6 amps switch complete all as specified

M&L for Point wiring with 2.5 Sqmm (nominal cross sectional area), single core, PVC insulated with multistranded PVC unsheathed FRLSH copper conductor cable in and including rigid non- metallic PVC concealed conduit of suitable size medium grade ISI marked complete including one continuity earth wire of PVC insulated, unsheathed 2.5 Sqmm (nominal cross sectional area) FRLSH copper conductor connected to all fittings, common earth and connected to earth dolly for one three pin 15/16 Amps socket out-let point on an independent board including modular metal flush box, cover plate and cover frame of suitable size incl taking down carefully copper/ alluminium power point wiring switches, sockets, and making good disturbed surface of walls and floors etc. complete all as specified.

S&F of Ceiling rose three terminals surface bakelite type, AC, 50 HZ, 230V complete all as specified.

S&F modular switch 1 way 6 A, 1 module complete all as specified.

S& F modular socket 6 Amps 2/3 pin combined 2 module complete all as specified.

S&F switch modular type 16 A, 1 module complete all as specified and directed.

S&F socket modular type multipurposes 6/16 A, 2 module complete all as specified.

All as per item No. 72 here in above but with using 4.0 Sqmm single core copper conductor FRLSH cable of multistrandard PVC insulated unsheathed 1100volts grade for 5/15 Amps switch socket combination point including necessary running of 4.0 Sqmm PVC insulated copper conductor FRLSH cable as earth continuity conductor along with wiring and connecting to the common earth dolly complete all as specified.

S&F for single pole and earth encolsure with a two pin and earth plug with socket 240 Volts, 50 Hz complete with onesingle pole MCB SP 20 Amps complete all as specified.

S&F 20W LED 6500K lights fitting ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient with three core flexible copper conductor cable of suitable size from ceiling rose complete with all connected accessories complete all as specified.

S&F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for Bldg security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 35 watts with pre wired and necessary mounting arrangements and provision of 2.5 Sqmm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed

S&F for Decorative wall mounted luminaire brushed nickel finish fixture with opal glass diffuser made out of polycarbonate with unbreakable globe suitable for LED bulb and provosion of LED bulb 9 Watts with base B22 complete all as specified and directed.

S&F in repairs for LED luminaire 2 x 2 fit square LED panel 35/36 watts, 220 volts, AC recessed/ surface mounted type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling, including connecting up with driver three core flexible copper conductor cases of suitable size complete all as directed by Engineer- in-charge.

S&F plastic body exhaust fan, AC single phase 230/ 240 V of size 250mm sweep with louver, white in colour including cutting of wall and duly connection with copper wire from ceiling rose etc complete all as specified and directed.

S&F of ceiling fans complete with blades, down rods, electronic regulator/ remote control and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC), complete all as specified and directed.

M & L for sub main wiring with 02 runs of 4 Sqmm main wire along with 01 run of 2.5 Sqmm earth wire (green in colour) single core FRLSH PVC insulated, unsheathed, multi-stranded, 1100 volts grade ISI marked copper conductor cable, drawn through and including adequate size rigid non-metallic PVC concealed/ surface conduit (medium grade) wherever necessary with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good the same & taking down complete all as specified and directed. Note:- Two runs of main copper conductor, one run of earth wire and one run of PVC conduit shall be measured as one unit length.

S&F (in replacement) for sheet metal enclosure MCCB DB (Optium F1 +12) VTPN 4 way Vertical type IP54 protection with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

S&F MCB DB SPN 6 way double door with 200 Amps rated bus bar, 230 volts, 50 Hz including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and directed.

S&F MCCB 4 pole, 415 volts, in the existing panel/ location and connection with using aluminum lugs complete all as specified and directed for 125 to160 Amps Adjustable type with breaking capacity 36 KA complete all as specified.

Supply and fixing (in replacement) 32 Amps rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 32 Amps and current carrying capacity in the MCB DB complete with connection testing and commissioning all as specified and directed.

S&F 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 Amps, in the MCB DB Complete with connection testing and commissioning. complete all as specified.

Supply, laying and testing and commisioning cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 Sqmm 3.5 core laid in pipes, trenches/ ducts, on poles complete all as specified.

Supply laying and jointing GI pipe 'light grade' 50mm bore in trenches/ under floors or roads/ along poles/ on wall incl clamps for protection of cables incl fittings complete all as specified.

Excavation in trenches not exc. 1.5m wide and not exc 1.5m deep in hard/ dense soil and getting out complete all as specified.

Returning filling in trenches including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil complete all as specified.

Removing surplus excavated material to a distance not exc 50m and depositing where directed at a level not exc 1.50m above the starting point complete all as specified.

M&L for filling approved fine river sand in trenches as cable cushion to the full width of excavated trench, under and over cable complete all as specified and as directed. (Note : Punned thickness of sand shall be measured)

M&L for bricks slightly over burnt (kiln burnt), modular bricks, best quality, locally available, laid flat, dry, laid in trenches along the length of cable transvarsally with width equal to length of brick for cable protection all as specified and as directed.

M&L for Replacement of Earthing complete with galvanized steel earth plate electrode 600mm x 600 x 6mm thick, buried directly in ground vertically to a depth not less than 2.25 meters deep below ground level with top edge of the plate not less than 1.5 Mtrs below normal ground level connect to galvanised earth lead wire of 4.0 sqmm size by means of bolts, nuts, check nuts and washers of galvanized iron or steel up to 7.5 meter length including connected to earth plate including necessary excavation & earth work, PCC (1:3:6) type C-1 earth chamber, 40mm thick RCC cover 1:2:4 mix with 6mm dia nominal reinforcement @ 150mm c/c both ways etc complete all as shown in electrical plate No 5, connected to earthing test point complete including testing on completion all as specified.

Supply and laying of Galvanised Iron water pipe, medium grade, of size 25mm bore laid in trenches/ on wall etc complete with all stop valve and GI accessories all as specified and directed.

S & F for ceiling fan, 230 Volts, 50Hz, 1200mm sweep with down road 15mm/ 12mm upto two mtr or as per site requirement canopy, blades, BLDC motor etc and service value of the fan shall be greater than 6.1 as per BIS with necessary accessories and electrical connections with remote and battery, from ceiling rose to fan teriminal including writting the MES Number with synthetic enamel paint complete all as specified and directed.

S & F for energy efficient exhaust fan havey duty of 300mm sweep made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/ 0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base including writting the MES Number with synthetic enamel paint compelte all as specified and directed. Note:- Cost of suitable opening wall for fixing exhaust fan is deemed to be included in overall rate quoted).

ms shrilaxminarayan and sons (BID ID -3066698)

Jamna Constructions (BID ID -3064684)

m/s ajay chandil (BID ID -3091861)

RK CONSTRUCTION (BID ID -3074616)

M/s Shree Ganesh Traders (BID ID -3091781)