REPAIR TO E/M INSTALLATION AT MIL STN KALKA UNDER GE (I) JUTOGH

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:4), complete all as specified and directed..

Demolition of cement concrete (un-reinforced ) in ground floor and paving not exc. 15 cm thick (below and above ground level) complete all as specified and as directed.

M&L for 100mm thick, PCC 1:4:8, Type D-2, using 40mm graded crushed stone aggregate as in sub base of floor complete all as specified and directed.

S&F providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.

RM&L for rendering 15mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4), using water proofing compound, complete all as specified and directed. Note: WPC will be measured and paid for separately

M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coats of oil bound distemper on wall over primer over 1-2 mm (av-1.5 mm Thick wall care putty to achieve smooth and even surface incl preparation of surface complete all as specified and directed.

M&L for complete removal of existing treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete all as specified and directed.

Demolition of mud in roof any thickness whether full thickness removed or part thereof including plaster & leaping complete all as specified and directed.

M&L for PCC 1:2:4, type B-1, using 20mm graded mechanically crushed stone aggregates as in padding to roof to maintain the required slope and finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for screed bed 15mm thick in CM 1:4 on concrete surfaces finished even and smooth without using extra cement including mixing of water proofing compound of approved make as per manufacturers instructions on existing surfaces, complete all as specified and directed.

M&L for cleaning of roof slab surfaces including sweeping clean & washing down with water to remove dust & providing water proofing treatment with polymeric standard water proofing membrane complete all as specified and directed. (a) M&L preparation of plaster surfaces /RCC roof surfaces and applying one coat of oil bound bituminous primer @0.03 ltr/Sqm (b) M&L applying blown type bitumen @1.20Kg/Sqm of grade 85/25 (c) Supplying and laying modified polymeric water proofing membrane super thermo lay 3mm thick of weight not less than 3.00kg /sqm reinforced with polyester non woven fabric weight not less than 150gm/sqm center core including coping on the surfaces with torch application of membrane with 10cm over laps as required all complete all as specified and directed . (d) Applying two coats of aluminium paint @ 0.2 kg/sqm

Supply only Integral water proofing compound, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description in any position not otherwise provided for, complete all as specified and directed.

M&L for roof trusses framed, trussed, rail and fastenig and bracket framing (Beam, Tee, angl, tubler Sectin) of Fe-410, Gde-E-250, incl distance peaces, complete all as specified and directed.

M&L for framed work such as grills, gratings etc., with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290 Gde E-165, complete all as specified and directed.

S&F angle iron as in posts and struts for fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc) including all necessary drilling bolting or riveting etc and similar work conforming to Fe-290 gde E-165 complete all as specified and directed

M&L for mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips Fe-410W (Gde E-250) quality A or Fe-290 (Gde E-165), complete all as specified and directed.

S&F floor door stopper aluminium body and tongue,anodised overall length of cover plate of size 140 mm long with hard drawn steel spring complete all as specified and directed.

S&F 30mm thick flush shutter, solid core construction with block board core and plywod face panels, both faces are covered with decorative face veneer with lipping/ frame to match complete all as specified and directed.