Providing Foot Path and Play materials to the Gandhi Nagar Park in ward No57 East zone

Amount

Cleaning Light Jungle using mechanical JCB including cleaning the debris

Earth work excavation of building in kind of soilsand sup soilsand full depth as may be directed by the departmental officers with initial lift and leads and cleaning and leveling the site.

Conveying the excavated earth from site to a distance of not more than 0-15Km within the city limit including loading,transportation,unloading etc complete

Cement concrete 1:4:8(one cement,four sand and eight aggregate) using 40mm gauge hand broken granite stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15cm thick and compacted

Supplying and erection shuttering,including necessary supports for plain in all floors using mild steel sheets of size 90x 60 cms and BG 10 stiffed with surfacewelded mild steel angles for boarding supported by casuarina props at suitable intervals etc. completecomplying with standard specifications as directed

Vertical Walls

Supplying,fixing and placing in position mild steel /ribbed torsteel rods for all RCC works including cost of steel and binding wire also in all floors,complete complying with standard specifications(upto 16mmdia rods)

Cement Concrete 1:1.5:3 (one cement,one and half sand and three aggregate )using 20mm gauge hard broken granite stone jelly for all RCC items of work excluding centring, shutteringand cost of reinforcement grill but including fixing fan clamps and fixtures in RCC works wherever necessary as per the direction of departmental officers complete

Fly ash Brick work in CM 1:5 (one cement & five sand) using size 9"X4 3/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification -

plastering the exposed surface of RCC works in cement mortar 1:3 mix 10mm thick following proportions at all heights and depths above or below plinth level including scaffolding curing etc. complete complying with standard specifications and drawings and as directed by Departmental

Filling with Quarry Rubbish including watering and consolidation as per direction of Departmental officers

Supplying and Laying TAMIN Block Providing and laying of 80 mm thick high strength type conforming IS 15658 -2006 of TAMIN Paver Block in size of minimum compressive strength of 40 N/mm2 In uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approved non skitting surface in the top and the rate including leveling the base perpareation of pavers as sub base, stone dust cushion 150 mm thick laying out of pavement cut the pieces to fix the edge vibring the paversl sweeping transporting loading unloading of laying paver block as per the standard specifications

Plastering with cement motar in cm 1:5 (one cement and five sand) 12mm thick in all floors complying with standard specifications

Painting with two coats of plastic emulsion with approved colour best quality paints as per the direction of departmental officers

S/Fixing fo Swing Two Seater with bit of 8'-0" above GL using 50mm Diams pipe 9swg with 3.65mm on wall thick with one coat of primer and two coats of enamel paint and seat using with paddale wood with polishing

S/fixing of Slide Ladder park model using 16g ms Sheet for Sliding 8'-0" support pipe 40mm dia MS pipe 10Swg 3.25 mm wall thick ladder using 25mm L angle for sliding Support hand Rails using 25mm sq.rod and platform frame using 40mm L angle with one coat of primer and two coats of enamel paint

S/fixing of Jungle Jim pipe 40mm dia MS pipe 10swg 3.25mm wall thick running three horizontally and vertically on each side finishing one coat of primer and two coats of enamel paint of approved colour as per instruction of departmental officers

S/fixing of twin Sea Saw two seater of 6'-0" length and 4'-0" height using 50mm G.I. pipe with two coats of enamel paint over one coat of primer and platform using 1: paddale wood with polish as per direction of departmental officers

Supply and fixing of Merry Go round using M.s pipe of 50 dia and 4mm length of 1.80m height as central pipe and bearing assembly outer pipe size of 125mm dia and 8mm thick and the unit should be assembled to a length of 250mm. The mwerry go round of 6seat approved by the executive engineer before use on work

Add :- GST @ 18%

SRI AARURA CONSTRUCTIONS (BID ID -1193459)