Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹1.2 Cr
EMD Value
₹2 L
Closing Date
5 Dec 2025, 9:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Public Works Department
EE DHARWAD
Construction of Bridges at CH 6.70 km, 20.60 km and 24.10 km on Navalgund Gudageri State Highway - 266 of Annigeri taluk of Dharwad district.
PWD/2025-26/BR/WORK_INDENT28085
PWD/2025-26/BR/WORK_INDENT28085
Open
Bridges/Culverts
Two Tender Document System(Two Cover)
PWD Division Office Dharwada
6 documents required · 6 mandatory
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
3.2 B To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2020-21, 2021-22, 2022-23, 2023-24 & 2024-25 Satisfactorily completed at least 50 Percent of the contract value, as prime contractor at least one similar work such as Construction of Bridge / RCC Box Culvert work of value not less than Rs. 62.41 Lakhs.
To qualify for the award of this contract, each Tenderer in its name should have in the last five years i.e. 2020-21, 2021-22, 2022-23, 2023-24 & 2024-25 executed in any one year the following minimum quantities of work 1.Earthwork Excavation/ Subgarde/Embankment -1429.64 Cum 2.Asphalt work(including BM/DBM/BC/SDBC)/MSS-164.62 Cum 3.Cement Concrete/RCC/PCC-433.47 Cum, 4. Steel-34.47 Tonne
The Tenderer should be a PWD Registered Class III & above contractor
As per this note, each tenderer should demonstrate availability of few key equipments / machinery for execution of the work. However as per Govt circular no GO-FD/AE 263/EXP12-2022 dt 11-05-2022, this clause for owning key equipments for works costing up to Rs.3.00 crores is exempted. However it is obligatory for the contractor to use the machineries for various activities involved in construction as per Morth specification
Liquid assets and/or availability of credit facilities of not less than Rs.62.41 Lakhs Credit lines/letter of credit/ certificates from the banks for meeting the fund requirement etc. LOC should be in prescribed format-2, if not, then the tender will not be accepted.
3.2 b.To qualify for the award of this contract, each Tenderer in its name should have in the last five years i.e. 2020-21, 2021-22, 2022-23, 2023-24 & 2024-25 Achieved in at least Two Financial years a minimum financial turnover(in all classes of civil engineering construction works only) of Rs.249.64 Lakhs. With UDIN Number
Reports on the financial standing of the Bidder, such as profit and Loss Statement and Auditor Report for the last five years
Tearms and Conditions as per KW-4 Bid Document
₹3,130
₹2 L
20 Nov 2025
20 Nov 2025
6 Dec 2025
1 Dec 2025
1 Dec 2025
Construction of Box Culvert at CH 20.6km and CH 24.10km and Pipe Culvert at CH 6.70km on Navalgund Gudigeri State Highway - 266 of Navalgund and Annigeri taluk of Dharwad district.
Dismantling of Structures - Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, inc...
Mechanical Means -
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...
Mechanical Means -
Providing and Filling in foundation with granite / trap broken metal 100mm. and down size & with approved sand including hand packing, ramming, watering, including cost of all mater...
Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with PVC Pipe 110mm outer dia at 2 kg per m2, extending through the fu...
Providing and laying of Filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of ...
Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification - Granular material. Ref to MoRT&H : IRC - 710.1...
Providing and laying boulders apron on river bed for protection against scour with stone boulders weighing not less than 40 kg each complete as per drawing and Technical specification. - Boulder Laid ...
Laying Reinforced Cement Concrete Pipe NP4 / Prestressed Concrete Pipe on First Class Bedding in Single Row - Laying Reinforced cement concrete pipe NP4/prestressed concrete pipe for culv...
Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transporta...
Construction of Subgrade and Earthen Shoulders - Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting...
Granular Sub-Base - By Mix in Place Method - Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared sur...
Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC ...
Prime Coat over WMM/WBM - Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying ...
Tack coat on Bituminous surface - Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface clean...
Dense Graded Bituminous Macadam Grading - II for traffic <20 MSA - Providing and laying Dense Graded Bituminous Macadam with 40/60 TPH capacity HMP using crushed aggregates of specified gradi...
Bituminous Concrete Grading II for traffic <20 MSA - Providing and laying Bituminous Concrete with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading, pre...
Painting Two Coats on New Concrete Surfaces - Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces. Ref to MoRT&H : IRC - 8...
Drainage Spouts using 100 mm GI pipe complete as per drawing and Technical specification. Ref to MoRT&H : IRC - 2705
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...
Steel Fabrication
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...
Steel Fabrication
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...
PCC M15 Grade leveling course below approach slab complete as per drawing and Technical specification. Ref to MoRT&H : IRC - 2700
Reinforced cement concrete M30 grade for approach slab including reinforcement and formwork complete as per drawing and Technical specification (Batching Plant). Ref to MoRT&H : IRC - 15...
Construction of RCC railing of M30 Grade in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre s...
Cement Concrete Blocks (size 0.5 x 0.5 x 0.5 m) - Providing and laying of apron with cement concrete blocks of size 0.5x0.5x0.5 m cast in-situ and made with nominal mix of M-15 grad...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
28085 FINAL.xls
Others - 28085 TQ • 1.11 MB
bid document kw 4 wi 28085.docx
Tender Document • 1.19 MB
government notification BC LOC letter to be issued by the Bank.pdf
Others - LOC FORMAT • 1.73 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .