8487/GWL/E8 REPAIR AND RE-CANNING/PAINTING AND POLISHING TO CERTAIN CHAIRS AND MISCELLANEOUS WOODEN ITEMS AT MORAR CANTT UNDER GE GWALIOR

Amount

REPAIR TO TABLE DRESSING LADIES : FD-251/ FD-232/ 32 ,FD-378 : Dismantling, taking out carefully old existing broken top of table dressing ladies of any description & replacement of the same with S&F new top table dressing ladies of 18 mm thick pre-laminated particle board exterior grade, BWP (Natural teak wood shade), made to shape, fixed in position, all as shown on drgs, specified in particular specification and directed by the Engineer-in-Charge complete materials & labour

All as per item 1 here in before but replacement of side of table dressing ladies with S&F new side of table dressing ladies with teak wood veneered one side & commercial on other side. all as shown on drgs, specified in particular specification and directed by the Engineer-in-Charge complete materials & labour

All as per item 1 here in before but replacement of slide glass shutter with aluminum channel, 5.5 thick, 550mm x 380mm with groves for sliding rest all as shown on drgs, specified in particular specification and directed by the Engineer-in-Charge complete materials & labour

All as per item 1 here in before but replacement of bottom commercial ply with teak (veneered one side) commercial other side) with S&F new bottom commercial ply with teak veneered one side (commercial other side). All as shown on drgs, specified in particular specification and directed by the Engineer-in-Charge complete materials & labour

All as per item 1 here in before but replacement of mirror 366mm x 1220 x 5.5 mm thick with S&F new mirror 366mm x 1220mm x 5.5mm. all as shown on drgs, specified in particular specification and directed by the Engineer-in-Charge complete materials & labour

All as per item 1 here in before but replacement of back frame with S&F new back frame of 6 mm commercial ply wood back member made out of 45mm x 40mm teak wood. all as shown on drgs, specified in particular specification and directed by the Engineer-in-Charge complete materials & labour

All as per item 1 here in before but replacement of chromium plated knob 25mm dia 24mm length with S&F new chromium plated knob 25mm dia, 24mm length of best quality as approved. all as shown on drgs, specified in particular specification and directed by the Engineer-in-Charge complete materials & labour

All as per item 1 here in before but replacement of drawer of table dressing ladies with S&F new drawer as per Drg and approved. all as shown on drgs, specified in particular specification and directed by the Engineer-in-Charge complete materials & labour

All as per item 1 here in before but replacement of legs of table dressing ladies with S&F new legs of Ist class HW(MP teak wood). all as shown on drgs, specified in particular specification and directed by the Engineer-in-Charge complete materials & labour

All as per item 1 here in before but replacement of side long rail jointed to leg of table dressing ladies with S&F new side long rail jointed to leg of Ist class HW (MP teak wood). all as shown on drgs, specified in particular specification and directed by the Engineer-in-Charge complete materials & labour

All as per item 1 here in before but replacement of short rail of table dressing ladies with S&F new short rail of Ist class HW (MP teak wood). all as shown on drgs, specified in particular specification and directed by the Engineer-in-Charge complete materials & labour

Polishing one coat to old surfaces and two coats to new surfaces including preparation of surfaces for table dressing ladies. all as specified & directed by Engineer-in-Charge.

REPAIRS TO TABLE DRESSING GENTS : FD-230/ FD-31 : Dismantling, taking out carefully and replacement of old existing broken top of table dressing gents of any description & replacement of the same with S&F new top table of 18mm thick prelaminated particle board one side teak face laminated & other side white balancing, exterior grade, BWP with and including 6mm thick teak wood beading alround made to shape, fixed in position, all as shown on drg, specified and directed by the Engineer-in-Charge complete materials & labour.

All as per item 13 here in before but Replacement of side with S&F new side of 12mm thick particle board, one side teak veneered and other side commercial, exterior grade, BWR with and including 6mm thick teak wood beading alround, made to shape, fixed in position, all as shown on drg, specified and directed by the Engineer-in-Charge complete materials & labour.

All as per item 13 here in before but Replacement of bottom with S&F new 12mm thick ply, teak veneered on one side and commercial on other side grade I with (BWR Resin) made to shape fixed in position, all as shown on drg, specified and directed by the Engineer-in-Charge complete materials & labour.

All as per item 13 here in before but Replacement of mirror with S&F new mirror of size 380mm x 760mm x 5.5mm thick (Make : Atul, Swastic, Golden fish) made to shape all as shown on drg, specified and directed by the Engineer-in-Charge complete materials & labour.

All as per item 13 here in before but Replacement of back frame with S&F new back frame made out of 45mm x 40mm teak wood members & 6mm thick commercial ply grade BWR type BB, made to shape all as shown on drg, specified and directed by the Engineer-in-Charge complete materials & labour.

All as per item 13 here in before but Replacement of knob with S&F new chromium plated knob 25mm dia, 24mm length as approved by the Engineer-in-Charge of best quality.

All as per item 13 here in before but Replacement of drawer with S&F new drawer made to shape all as shown on drg, specified and directed by the Engineer-in-Charge complete materials & labour.

Polishing one coat to old surfaces and two coats to new surfaces including preparation of surfaces for table dressing gents complete all as specified & directed by Engineer-in-Charge.

CHAIR VERANDAH:-FD-256 and FD/MAP-II/06: Removing the existing unserviceable cane/niwar plastic from the seat and back of chair and re-weaving the seat and back of chair with 55 mm wide nylon newar of 1st quality, white/brown colour in pure godrej pattern The re-weaving of chairs shall only be carried out after complete painting process as specified in drg. MAKE OF nylon newar- SHAH,PREMIER

Removing the old broken shoes of chairs and Supply and Fixing best quality new PVC shoes to the legs of chair.

Removing the existing unserviceable/broken PVC seat and back from the chair,supply and fixing new PVC seat and back 4mm thick to the chair verandah MAP after providing flat iron 20mmx 4mm support in centre of seat only by proper welding for support of PVC seat.The PVC seat shall got approved from GE before supply. MAKE OF PVC SEAT:-AMKO/COMFO/HARMONY

Painting to chair verandah with one coat of synthetic enamel white paint after cleaning,dusting and scratching the entire metal surface of chair with sand paper ,making surface neat and smooth for caning.

CHAIR WRITING officers ,FD/E6/MAP/12 :Removing unserviceable damaged Seat & back of Chair writing. Supply and fixing the seat & back made of 12 mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lipping all round. The polyurethane foam shall be 50 mm thick and shall be moulded with density 50-55 Kg per cubic mtr on Hampden machine.

Removing old unserviceable arm rest of chair writing officer and S&F new arm made of black integral skin polyurethane with 75-85 shore 'Á ' hardness & reinforced with MS insert all as specified and directed by Engr -in -charge.

Painting to all steel portion of chair writing with one coat of synthetic enamel black paint after cleaning,dusting and scratching the entire metal surface of chair with sand paper ,making surface neat and smooth.

REPAIRS TO CHAIR DINING/CBB W/O ARMS FD-16, FD-279, FD-228, FD-3972 Dismantling, taking out carefully of old existing broken back leg of the chair dining/CBB of any description & replacement of the same with S&F new back leg of Ist class hard wood (teak wood), made to shape, fixed in position all as shown on drawing specified and directed by theEngineer-in-Charge.

All as per item 28 here in before but replacement of front leg with S&F new front leg made out of Ist class hard wood (teak wood).

All as per item 28 here in before but replacement of side rail with S&F new side rail made out of Ist class hard wood (teak wood) with holes for weaving. The spacing of holes shall match with the existing rail on other side.

All as per item 28 here in before but replacement of front or back rail with S&F new front or back rail made out of Ist class hard wood (teak wood) with holes for weaving. The spacing of holes shall match with the existing rail on other side.

All as per item 28 here in before but replacement of stiffener with S&F new stiffener made out of Ist class hard wood (teak wood) complete all as shown on drawings.

All as per item 28 here in before but replacement of back strip with S&F new back strip made out of Ist class hard wood (teak wood) complete all as shown on drawings.

All as per item 28 here in before but replacement of rubber shoe with S&F new hard rubber shoe of superior quality with Steel plated screws of size 20mm long complete as approved and all as shown on drawings.

Provn. of new angular bracket with 08 Nos steel screws suitable size of Ist class hard wood (teakwood) of size 75mm x 75mm x 25mm complete as approved and all as shown on drawings.

Recanning of chair Dining with 2mm wide new plastic cane

Polishing two coats to old and new surfaces of Chair Dining after repair with melamine polish of approved Make including preparation of surfaces.

REPAIRS TO CHAIR WRITING/CBA FD-20,FD-260, FD-250, FD-280, FD-4124 :- Dismantling, taking out carefully of old existing broken back leg of the chair writing/CBA of any description, & replacement of the same with S&F new back leg of Ist class hard wood (teak wood) made to shape, fixed in position all as shown on drawing, specified and directed by the Engineer-in-Charge.

All as per item 38 here in before but replacement of front leg with S&F new front leg made out of Ist class hard wood (teak wood).

All as per item 38 here in before but replacement of side rail with S&F new side rail made out of Ist class hard wood (teak wood) with holes for weaving. The spacing of holes shall match with the existing rail on other side.

All as per item 38 here in before but replacement of front or back rail with S&F new front or back rail made out of Ist class hard wood (teak wood) with holes for cane weaving. the spacing of holes shall match with the existing rail on other side.

All as per item 38 here in before but replacement of back strip with S&F new back strip made out of Ist class hard wood (teak wood) complete all as shown on drawings.

All as per item 38 here in before but replacement of Arm rest with S&F new Arm rest made out of Ist class hard wood (teak wood) complete all as shown on drawings.

All as per item 38 here in before but replacement of stiffener with S&F new stiffener made out of Ist class hard wood (teak wood) complete all as shown on drawings.

All as per item 38 here in before but replacement of rubber shoe with S&F new hard rubber shoe of superior quality with Steel plated screws of size 20mm long complete as approved and all as shown on drawings.

Provn of new angular bracket with 08 Nos steel screws suitable size of Ist class hard wood (teakwood) of size 75mm x 75mm x 25mm complete as approved and all as shown on drawings.

Recanning of chair writing/CBA with 2mm wide new plastic cane

Polishing two coats of old and new surfaces of chair writing/CBA after repairs with melamine polish of approved Make including preparation of surfaces.

REPAIRS TO CHAIR EASY OF SORTS, Chair easy with detachable cushion : FD-229, FD-201, FD-17, FD-229, FD-358: Dismantling, taking out carefully of old existing broken back leg of the chair Easy of sorts of any description, & replacement of the same with S&F new back leg of Ist class hard wood (teak wood) made to shape, fixed in position all as shown on drawing, specified and directed by the Engineer-in-Charge.

All as per item 49 here in before but replacement of front leg with S&F new front leg made out of Ist class hard wood (teak wood).

All as per item 49 here in before but replacement of side rail with S&F new side rail for seat made out of Ist class hard wood (teak wood) with holes for weaving. The spacing of holes shall match with the existing rail on other side.

All as per item 49 here in before but replacement of front & back rail for seat with replacement S&F new front & back rail made out of Ist class hard wood (teak wood) with holes for cane weaving. The spacing of holes shall match with the existing rail on other side.

All as per item 49 here in before but replacement of side rail for back frame with replacement S&F new side rails for back frames made out of Ist class hard wood (teak wood) with holes for cane weaving. The spacing of holes shall match with the existing rail on other side.

All as per item 49 here in before but replacement of top and bottom rail for back frame with S&F new top and bottom rail made out of Ist class hard wood (teak wood) with holes for cane weaving. The spacing of holes shall match with the existing rail on other side.

All as per item 49 here in before but replacement of front support rail with S&F new support rail made out of Ist class hard wood (teak wood) complete all as shown on drawings.

All as per item 49 here in before but replacement of Arm rest with S&F new Arm rest made out of Ist class hard wood (teak wood) complete all as shown on drawings.

All as per item 49 here in before but replacement of rubber/PVC shoe with S&F new hard rubber/PVC shoe of superior quality with Steel plated screws of size 20mm long complete as approved and all as shown on drawings.

Provn of new angular bracket with 04 Nos steel screws suitable size of Ist class hard wood (teakwood) of size 75mm x 75mm x 25mm complete as approved and all as shown on drawings.

Recanning of Chair Easy of sorts with 2mm wide new plastic cane (Make Saha Brand) in Godrej pattern.

Polishing two coats to old and new surfaces of Chair Easy of sorts after repairs with melamine polish of approved Make including preparation of surfaces.

Removing u/s cushion from Chair easy with detachable cushion and provn of new cushion made of 75 mm thick 'U' foam, 40 density,ISI marked with leatherised rexene of approved shade and texture as directed.

CHAIR DINING ,FD-262,,FD/MAP-II/05: Back rest

Leg stiffener

Front legs

Rear Legs

Rails

Removing the existing unserviceable cane plastic and recanning the chairs in true Godrej pattern with plastic cane 2mm to 2.5mm wide of white colour 1st quality.The border of seat shall weaved with 4mm thick cane.The canning of chairs shall only be carried out after complete polishing process as specified and as shown on drgs.

Polishing to wooden article with melamine polish of approved grade and brand after cleaning,dusting and scratching the entire wooden surface of article with sand emery paper, filling putty to the bore holes making surface smooth by sanding and grinding with standard workmanship.The polishing shall be carried out after making the article intact by tightening all parts by placing wooden brackets at each corners and carrying out antitermite and antibug treatment.

REPAIRS TO PEG TABLE : FD-77/ FD-236,277,384 : Dismantling, taking out carefully and replacement of old existing broken top of peg table of any description, & replacement of the same with S&F new top of peg table with 18mm thick pre laminated particle board one side teak face lamination & other side white balancing, exterior grade, BWR with and including 6mm thick teak wood beading alround made to shape fixed in position, all as shown on drg, specified and directed by the Engineer-in-Charge complete materials & labour

All as per item 69 here in before but replacement of leg with S&F new teak wood leg made to shape . All as shown on drgs, specified in particular specification and directed by the Engineer-in-Charge complete materials & labour

All as per item 69 here in before but replacement of long rail with S&F new teak wood long rails made to shape . All as shown on drgs, specified in particular specification and directed by the Engineer-in-Charge complete materials & labour

All as per item 69 here in before but replacement of short rails with S&F new teak wood short rails made to shape . All as shown on drgs, specified in particular specification and directed by the Engineer-in-Charge complete materials & labour

Polishing one coat to old surfaces and two coats to new surfaces including preparation of surfaces of peg table complete all as shown on drg.

REPAIRS TO TABLE BED SIDE : FD-276 Dismantling, taking out carefully & replacement of old existing broken table top of Table Bed side of any description & replacement of the same with S&F new table top of 18mm thick prelaminated particle board BWR, exterior grade of make Novapan/ Eco Board, with including 6mm thick teak wood beading alround, made to shape, fixed in position all as approved, shown on drawing, specified, and directed by the Engineer-in-Charge.

All as per item 74 here in before but replacement of side of table bed side with S & F new sides with 12 mm thick particle board one side Teak wood with 6 mm thick beading. . All as shown on drgs, specified in particular specification and directed by the Engineer-in-Charge.

All as per item 74 here in before but replacement of shelf & bottom with S&F 12 mm thick particale board one side teak wood grade-I with 6 mm thick beading. complete all as shown on drawings, specified and directed by the Engineer-in-Charge.

All as per item 74 here in before but replacement of back ply of table bed side with S&F new back ply with 6 mm thick commercial ply wood grade-I complete as shown on drawings, specified and directed by the Engineer-in-Charge.

Polishing two coats to old and new surfaces of table Bed side after repairs with french polish of approved Make including preparation of surfaces.

M/S MUKESH AGARWAL

ROHIT ENTERPRISES

M/s Manish Contractor