Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.5 LAccepted-AOC 1ST FLOOR PLOT NO 10 UNIT NO 111 AGARWAL CITY SQUARE MANGALAM PLACE ROHINI SECTOR 3 NEW DELHI 110085 | NORTH WEST | DELHI | 110085 | ₹2.5 L | L1 | Accepted-AOC work order issued |
| 2 | L2₹2.5 LRejected-Finance | ₹2.5 L | L2 | Rejected-Finance Not lowest bidder |
| 3 | L3₹2.5 LRejected-Finance | ₹2.5 L | L3 | Rejected-Finance Not lowest bidder |
| Sl No | Description | Qty | Unit | GOPI NATH SARKAR L1 | RS Enterprises L3 | Joymatara Enterprise L2 |
|---|---|---|---|---|---|---|
| 1.00 | Sofa set made of solid hard wood frame of a section not less than 50 mm x 35 mm, should be constructed using traditional joinery techniques like mortise and tenon joints, reinforced with dowels, screws, and wood glue. Corner blocks should be added for extra strength, especially at the joints. The base should have a strong Stainless steel legs support to handle the weight. fillied with High-density polyurethane foam with a density of 30-35 kg/m³ for the seat cushions and 20-25 kg/m³ for the back cushions. High-density foam for structural support. A softer foam layer or a blend of foam and down for added comfort. The foam should be wrapped in Dacron (polyester fiberfill) to give the cushions a fuller appearance and to prevent the foam from wearing out quickly. Upholstered with Leatherite (faux leather or rexine), which is durable, easy to clean, and water-resistant of apporved colour. The finish should be matte or semi-gloss for a premium look. Ensure additional padding at the armrests, edges, and corners for added comfort and aesthetics. Seat Cushions should have a depth of approximately 4-6 inches. The cushions should maintain shape even after extended use. Back Cushions slightly thinner than seat cushions, attached design preference. Typically, not less than 4 inches in depth. Armrests padded with foam and upholstered with leatherite. The height should be ergonomic for comfort. Seat Support - High-tensile webbing or sinuous springs (no-sag springs) beneath the seat cushions to provide even support and prevent sagging. Back Support - Elastic webbing for a comfortable and slightly flexible backrest. Legs -Staineless steel legs that match the frame construction. Legs should be sturdy, with an option for either straight or tapered legs, depending on the overall design of the sofa, typically around 6-8 inches from the ground to ensure easy cleaning underneath and comfortable seating height. The frame should be sanded smoothly and finished with a protective sealant or varnish that matches the upholstery. Three Seater | 2 | nos | 69,000 ₹1.4 L | 69,500 ₹1.4 L | 69,200 ₹1.4 L |
| 2.00 | Single Seater | 4 | nos | 27,000 ₹1.1 L | 27,500 ₹1.1 L | 27,300 ₹1.1 L |
Tender Value
Refer Docs
EMD Value
₹5,000
Closing Date
29 Aug 2024, 5:00 pmClosed
Assistant Engineer,PWD, Banga Bhawan
banga bhawan 3hailey road new delhi 110001
2024_PWD_734048_1
2024_PWD_734048_1
14/BB of 2024-25 Assistant Engineer Banga Bhawan
Open Tender
Miscellaneous Works
10 days
Banga Bhawan New Delhi
Please refer Tender documents.
4 documents required · 4 mandatory
₹5,000
Yes
Banga Bhawan New Delhi
21 Apr 2026
20 Aug 2024
31 Aug 2024
21 Aug 2024
29 Aug 2024
22 Aug 2024
23 Aug 2024
Amount
Sofa set made of solid hard wood frame of a section not less than 50 mm x 35 mm, should be constructed using traditional joinery techniques like mortise and tenon joints, reinforced with dowels, screws, and wood glue. Corner blocks should be added for extra strength, especially at the joints. The base should have a strong Stainless steel legs support to handle the weight. fillied with High-density polyurethane foam with a density of 30-35 kg/m³ for the seat cushions and 20-25 kg/m³ for the back cushions. High-density foam for structural support. A softer foam layer or a blend of foam and down for added comfort. The foam should be wrapped in Dacron (polyester fiberfill) to give the cushions a fuller appearance and to prevent the foam from wearing out quickly. Upholstered with Leatherite (faux leather or rexine), which is durable, easy to clean, and water-resistant of apporved colour. The finish should be matte or semi-gloss for a premium look. Ensure additional padding at the armrests, edges, and corners for added comfort and aesthetics. Seat Cushions should have a depth of approximately 4-6 inches. The cushions should maintain shape even after extended use. Back Cushions slightly thinner than seat cushions, attached design preference. Typically, not less than 4 inches in depth. Armrests padded with foam and upholstered with leatherite. The height should be ergonomic for comfort. Seat Support - High-tensile webbing or sinuous springs (no-sag springs) beneath the seat cushions to provide even support and prevent sagging. Back Support - Elastic webbing for a comfortable and slightly flexible backrest. Legs -Staineless steel legs that match the frame construction. Legs should be sturdy, with an option for either straight or tapered legs, depending on the overall design of the sofa, typically around 6-8 inches from the ground to ensure easy cleaning underneath and comfortable seating height. The frame should be sanded smoothly and finished with a protective sealant or varnish that matches the upholstery. Three Seater
Single Seater
Joymatara Enterprise
RS Enterprises
stage.html
html • 0.05 MB
technical_1620731.pdf
techsummary_1620731.pdf
finance_1620731.pdf
BOQ Comparative Chart
xlsx
finsummary_1620731.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.51 MB
Tendernotice_2.pdf
PDF • 1.30 MB
Tendernotice_3.pdf
PDF • 0.47 MB
BOQ_1620731.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid