CED6/74489/2021

Amount

CIVIL WORK

Dismantling brick masonry in cement mortar wall under 3metre high for any thickness of wall and clearing away and carefully stacking materials useful for reuse as directed by the departmental officers.

Dismantling doors and windows including removal of frame, hinges and fastening and clearing away and carefully stacking materials useful for reuse as directed by the departmental officers

Dismantling plain cement concrete and clearing away as directed by the departmental officers.

Dismantling reinforced cement concrete and clearing away as directed by the departmental officers.

Dismantling weathering course and pressed tiles and clearing away from the site as directed by the departmental officers.

Earth work excavation for foundation in all classes of soils and sub-soils and to full depth as may be directed except in hard rock requiring blasting

Supplying and filling in foundation and basement with M.sand in layers of not exceeding 150mm thick

Supplying and filling in foundation and basement with Gravel in layers of not exceeding 150mm thick well watered

Cement Concrete 1:4:8(one cement,foursand and eight aggregate) using 40mm gauge hard broken granite

Cement concrete 1:1 1/2:3(One Cement, one and half Sand and three Aggregate) using 20mm of hard broken granite stone In foundation and basement

In ground floor upto 4.50M height above basement

Supplying, fabricating and placing in position MS/RTS grills for reinforcement for all R.C.C.works

Providing FORM WORK for centering the soffits of all reinforcement concrete work including strutting to the required (3 metre) height with mild steel sheets

Roof Slab, lintel,

Column and sunshade

Brick Work in cement mortar 1:5(one cement, five sand) using best quality stock bricks of size 9”X4 3/8”X2 3/4” In Foundation and basement.

In ground floor upto 4.5M height above basement

Plastering the with cement mortor 1:5 (one cement and five sand) 12mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

Brick partition wall in cement mortar 1:3 (one cement three sand ) 11.50 cm thick using good quality second class chamber burnt bricks of size 9” x 4 3/8” x 2 ¾”

Supplying and fixing fine polished cuddapah slab of 25mm thickness for cup-board arrangements including laying to correct alignment

Plastering the with cement mortor 1:3 (one cement and three sand) 10mm thick including cost of scaffolding, finishing, curing etc., complete complying with standard specification and as directed.

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class approved quality and colour over a priming coat

Supplying and fabricating and fixing in position of mild steel door with double shutters using M.S.angle of size 40x40x6mm for outer frames and 35x35x5mm

Manufacturing, Supplying and fixing in position Steel window of the following types outer frames and shutter frames shall be made out of steel sections confirming to IS.7452/1990 t of ‘Z’ Section

Painting new iron works with two coats of synthetic enamel paint of approved quality and colour over the red oxide primer in all floor

Fabricating, supplying and fixing in position of SOLID PVC DOORS with frames of sizes as per the specifications given below: PVC door frames made out of best quality PVC extruded section

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime

Finishing the top of roof with one course of machine pressed tiles of size 23x23x2cm laid in cement mortar 1:2 (one of cement and two of sand)mixing with water

Paving the flooring with colour design Ceramic tiles of size 305x305x6mm of approved quality and colour over a base layer of C.M.1:3, 20mm thick

Paving the flooring with vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3

Supplying and fixing steel glazed ventilator with side hung shutter outer frame and shutter frame as directed by the departmental officer.

Supplying and fixing white glazed European water closet of approved best quality and make with 100mm P or S trap connecting with CI pipe

Dadooing the walls with coloured designed glazed tiles of size 150mmx150mmx6mm of approved quality and colour over a base layer of C.M.1:2,

Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550 X 400 mm

Supplying and fixing in position of best Indian make PVC Water Tank of 1000 litres capacity

Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make confirming to IS specifications

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve of 32mm dia with ISI make including cost of shellac, thread balls, etc., complete.

Supply, laying jointing PVC pipes of approved quality and best variety confirming to ISS and with ISI mark of 25mm dia, (10Kgf)

Supply, laying jointing PVC pipes of approved quality and best variety confirming to ISS and with ISI mark of 110mm dia, (6Kgf) including cutting

Supplying and fixing 25mm dia PVC Elbow of approved quality as directed by the departmental officers.

Supplying and fixing 25mm dia PVC Tee of approved quality as directed by the departmental officers.

Supplying and fixing 25mm dia PVC Coupling of approved quality as directed by the departmental officers

Supplying and fixing 25mmx20mm PVC reducer of approved quality as directed by the departmental officers

Supplying and fixing 25mm dia Hex Nipple of approved quality as directed by the departmental officers.

Supplying and fixing 110mm dia PVC Elbow of approved quality as directed by the departmental officers

Supplying and fixing 110mm dia PVC Tee of approved quality as directed by the departmental officers.

Supplying and fixing 110mm dia PVC bend of approved quality as directed by the departmental officers.

chandravel