Loading
Loading…
New
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.6 LAccepted-AOC 25 SHIV SAROVER COLONY GARH ROAD MEERUT 250002 | MEERUT | UTTAR PRADESH | 250002 | L1 | Accepted-AOC Found lowest bidder | |
| 2 | L2₹33.0 L+₹5,695 (0.17%)Rejected-Finance | L2 | Rejected-Finance 2nd lowest | |
| 3 | L3₹33.4 L+₹47,848 (1.45%)Rejected-Finance | L3 | Rejected-Finance 3rd lowest | |
| 4 | L4₹36.4 L+₹3.5 L (10.6%)Rejected-Finance 91 DEFENCE ESTATE PHASE II NEAR AMBEDKAR PARK DEORI ROAD AGRA UP | AGRA | UTTAR PRADESH | 282001 | L4 | Rejected-Finance 4th lowest | |
| 5 | L5₹37.1 L+₹4.2 L (12.8%)Rejected-Finance | L5 | Rejected-Finance 5th lowest |
| Sl No | Description | Qty | Unit | A.V. ASSOCIATES L1 | NP ENTERPRISES L3 | K S Enterprises L6 | Gupta Automobiles L4 | AIRCOM L2 | SIYA ASSOCIATES L8 | CHOUDHARY ELECTRICAL L7 | CHAUDHARY FURNITURE HOUSE L5 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00M&L for servicing, repair and replacement of unserviceable parts at E/M yard including opening of fan body of any type make & model cleaning, separating serviceable parts for reuse / refix same after repairing and replacing defecive parts witth new one of certain minor spares and consumables like MS screws, 2 way connector, rubber/ reel, insulator,condenser holder, ms nuts bolts, washers, grease is deemed to be included in the quoated rate ) reassembling, greasing complete all as specified and directed for the following:- Note:- Major spare parts required to make functional the equipments shall be measure & paid seprately under relevent items as S & F in repairs | |||||||||||
| 2.00 | Ceiling Fan 1200mm Sweep of any make or model | 300 | Each | 25 ₹7,500 | 30 ₹9,000 | 75 ₹22,500 | 40 ₹12,000 | 15 ₹4,500 Lowest | 21 ₹6,300 | 50 ₹15,000 | 60 ₹18,000 |
| 3.00 | Ceiling Fan 1400mm Sweep of any make or model | 100 | Each | 25 ₹2,500 | 35 ₹3,500 | 75 ₹7,500 | 40 ₹4,000 | 15 ₹1,500 Lowest | 21 ₹2,100 | 60 ₹6,000 | 60 ₹6,000 |
| 4.00 | Wall / Cabin Fan 400 / 450mm Sweep of any make or model | 10 | Each | 25 ₹250 | 30 ₹300 | 75 ₹750 | 40 ₹400 | 15 ₹150 Lowest | 21 ₹210 | 100 ₹1,000 | 60 ₹600 |
| 5.00 | Exhaust Fan 450mm Sweep of any make or model | 10 | Each | 30 ₹300 | 30 ₹300 | 75 ₹750 | 40 ₹400 | 15 ₹150 Lowest | 21 ₹210 | 150 ₹1,500 | 60 ₹600 |
| 6.00 | Pedestal Fan 400 / 450mm Sweep of any make or model | 5 | Each | 30 ₹150 | 25 ₹125 | 75 ₹375 | 40 ₹200 | 15 ₹75 Lowest | 21 ₹105 | 150 ₹750 | 60 ₹300 |
| 7.00 | Air Circulator Fan Heavy duty 450/600mm Sweep of any make or model | 10 | Each | 40 ₹400 | 45 ₹450 | 75 ₹750 | 40 ₹400 | 15 ₹150 Lowest | 21 ₹210 | 210 ₹2,100 | 60 ₹600 |
| 8.00M & L for rewinding the fans of any make, any model, from a reputed workshop, removing the burnt winding, cleaning slots, re-winding the motor with super enameled copper wire of size equivalent to the original winding including insulated packing materials, Varnishing, Drying etc with replacement of ball bearing, GM bush, body screws, testing and commissioning on full load for 4 hrs continuous running all as directed for the following:- | |||||||||||
| 9.00 | Ceiling Fan 1200mm Sweep of any make or model | 300 | Each | 170 ₹51,000 | 160 ₹48,000 Lowest | 250 ₹75,000 | 180 ₹54,000 | 200 ₹60,000 | 281 ₹84,300 | 280 ₹84,000 | 220 ₹66,000 |
| 10.00 | Ceiling Fan 1400mm Sweep of any make or model | 80 | Each | 170 ₹13,600 Lowest | 190 ₹15,200 | 250 ₹20,000 | 190 ₹15,200 | 220 ₹17,600 | 281 ₹22,480 | 350 ₹28,000 | 260 ₹20,800 |
Tender Value
Refer Docs
EMD Value
₹90,000
Closing Date
2 Jul 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (North) Meerut Cantt
GE (North) Meerut Cantt
MAINT AND REPAIR TO SUMMER APPLIANCES AND OTHER CONNECTED ITEMS UNDER AGE E/M-I OF GE (NORTH) MEERUT CANTT
2025_MES_703794_2
8549/E8
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
Meerut
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (North) Meerut Cantt
₹90,000
Yes
8 Aug 2025
13 Jun 2025
9 Jul 2025
13 Jun 2025
2 Jul 2025
19 Jun 2025
Amount
M&L for servicing, repair and replacement of unserviceable parts at E/M yard including opening of fan body of any type make & model cleaning, separating serviceable parts for reuse / refix same after repairing and replacing defecive parts witth new one of certain minor spares and consumables like MS screws, 2 way connector, rubber/ reel, insulator,condenser holder, ms nuts bolts, washers, grease is deemed to be included in the quoated rate ) reassembling, greasing complete all as specified and directed for the following:- Note:- Major spare parts required to make functional the equipments shall be measure & paid seprately under relevent items as S & F in repairs
Ceiling Fan 1200mm Sweep of any make or model
Ceiling Fan 1400mm Sweep of any make or model
Wall / Cabin Fan 400 / 450mm Sweep of any make or model
Exhaust Fan 450mm Sweep of any make or model
Pedestal Fan 400 / 450mm Sweep of any make or model
Air Circulator Fan Heavy duty 450/600mm Sweep of any make or model
M & L for rewinding the fans of any make, any model, from a reputed workshop, removing the burnt winding, cleaning slots, re-winding the motor with super enameled copper wire of size equivalent to the original winding including insulated packing materials, Varnishing, Drying etc with replacement of ball bearing, GM bush, body screws, testing and commissioning on full load for 4 hrs continuous running all as directed for the following:-
Ceiling Fan 1200mm Sweep of any make or model
Ceiling Fan 1400mm Sweep of any make or model
Wall / Cabin Fan 400 / 450mm Sweep of any make or model
Exhaust Fan 450mm Sweep of any make or model
Pedestal Fan 400 / 450mm Sweep of any make or model
Air Circulator Fan Heavy duty 600mm Sweep of any make or model
M & L for Preparing the surface, remove the existing painting by scraping, cleaning, filling the cavities and applying 2 coats of spray paint of synthetic enamel white / Brown paint , including writing the MES Nos. all as directed for the following:-
Ceiling Fan 1200mm Sweep of any make or model
Ceiling Fan 1400mm Sweep of any make or model
Exhaust Fan 450mm Sweep of any make or model
Air Circulator Fan 600mm Sweep of any make or model
S & F, Condensor / Capacitor, 240V, AC, suitable for fans all as directed for the following:-
2.5 mfd complete all as specified and directed
3.15 mfd complete all as specified and directed
4.0 mfd complete all as specified and directed
S & F Nickel plated mild steel clamps,rubber reel insulator Nuts, Bolts, Washers and split pin suitable for ceiling fans any type, any make, any size complete all as specified and directed
S & F, Down rod, suitably threaded and holed, made out of 15mmdia GI tubes, duly painted, 300mm long, suitable for ceiling fans any type, any make, any size complete all as specified and directed
All as described Ser item No. 25 here-in-before but 600mm long
All as described Ser item No. 25 here-in-before but 900mm long
S & F in repairs 1100V grade PVC sheathed PVC insulated flexible 2 core cable with multistranded copper conductor of size 1.5Sqmm, complete all as specified and directed
S & F in repairs base plate for wall mounting fan any type/ size as per existing size of fan complete all as specified and directed
S & F in repairs, Wall fan, 450mm sweep, AC,230V incl T/D old u/s one and depositing to MES store complete all as specified and directed.
S & F in reapirs, PVC fresh air fan, 250mm sweep with louvers, AC, 230V incl T/D old u/s one and depositing to MES complete all as specified and directed.
All as described Ser item No. 31here-in-before but 200mm sweep
S & F in reapirs Exhaust fan metal body 450mm with louvers, AC, 230V and depositing to MES store yard complete all as specified and directed.
All as described Ser item No. 33 here-in-before but 300mm sweep
S & F in repairs, Industrial type Wall mountedf Air Circulator fan, 450mm sweep, AC,230V and depositing to MES store yard complete all as specified and directed.
All as described Ser item No. 35 here-in-before but 600mm sweep
M & L for making opening in the wall for fixing exhaust fan upto 250mm/200mm, including plastering work & making good the surfaces complete all as specified and directed
S & F in repairs BLDC Ceiling Fan 1200mm Sweep with remote control, 5 star BEE rating Energy saving and depositing to MES store yard complete all as specified and directed.
All as described Ser item No. 38 here-in-before but 1400mm sweep
S & F in repairs of new compressor hermetically sealed type equipped with suitable rated capacity electric motor and over load protection making all existing connection including testing for 1.5 ton Window /Split type Air conditioners complete all as specified and directed
All as described Ser item No. 40 here-in-before but of capacity 2 ton.
All as described Ser item No. 40 here-in-before but Invertor type 1.5 Ton.
M&L for filing and checking Gas refrigerant R12/R22/R410A/R134a in the sealed system of window/Split type AC 1.5/2 Ton capacity after checking leakage / pressure vacumising flushing the sealed unit including replacement of filter drier and capillary tube complete all as specified and directed
Taking down of window/Split AC 1.5/2.0 any type/any model ton capacity and cleaning / servicing of AC, overhauling of blower motor , preparation of body for painting one coat of black paint inner side and one coat synthatic enameled paint on the outer cover of AC and marking of SM/MES No and testing of full load of summer season and reinstallation at site complete all as specified and directed. Note : Worn out parts shall be measured & paid seperately under relevant item as S & F in repairs.
S&F in repairs Split AC of capacity 1.5 / 2 TR Blower motor 1/6 HP with base / rubber bush complete Suitable for any make / model complete all as specified and directed
All as described Ser item No. 45 here-in-before but Condensor fan motor Suitable for Split AC/ Window AC double ended of capacity 1.5 / 2 Ton AC complete all as specified and directed
All as described Ser item No. 45 here-in-before but Condensor fan blade metallic.
All as described Ser item No. 45 here-in-before but Drum type blower fan PVC as per existing.
All as described Ser item No. 45 here-in-before but Running capacitor 36 mfd.
All as described Ser item No. 45 here-in-before but Starting capacitor 100 to 120 mfd
All as described Ser item No. 45 here-in-before but Thermostate
All as described Ser item No. 45 here-in-before but with plastic / juite Air filter.
All as described Ser item No. 45 here-in-before but cooling coil assembly suitable for any make / any model as per site requirement
All as described Ser item No. 45 here-in-before but Condensor coil assembly.
All as described Ser item No. 45 here-in-before but Wiring kit complete.
All as described Ser item No. 45 here-in-before but Capacitor 6 mfd.
All as described Ser item No. 45 here-in-before but Blower motor 1/3 HP for indoor unit split type AC suitable for any Make / any model as per site requirement.
All as described Ser item No. 45 here-in-before but Running capacitor 45 mfd.
All as described Ser item No. 45 here-in-before but Blower fan 3 Ft long suitable for split AC (as per existing) complete all as specified and directed
S & F in repairs of electronic circuit plate (PCB) with remote control including necessary repairs to electronic circuit operation suitable for 1.5 / 2.0 ton split/window type AC complete all as specified and directed
S & F in repairs Air break contactor relay 6.2 Amps, 415 Volts AC suitable for split type AC complete all as specified and directed
Labour for shifting of split AC 1.5 , 2 ton capacity one place to another places as required at site and disconnecting of copper tubing, PVC pipe connection and installation of New location indoor/outdoor unit complete with Gas charging tested on full load on summer season complete all as specified and directed
S & F in repairs indoor unit of capacity 2 ton with cooling coil, blower motor complete with all accessories complete all as specified and directed
S & F in repairs outdoor unit of capacity 2 ton with condensor coil, blower motor 1/6 HP , single phase, including fixing in old serviceable compressor and connection of copper tubing suction / discharge complete all as specified and directed
S & F in repairs of new compressor hermetically sealed type type compressor suitable for 300 to 320 ltrs capacity refrigerator with suitable rated capacity electric motor and shall be equipped with relay / over load protection 230 Volt, 50 Hz, including testing for any make or model complete all as specified and directed
All as described Ser item No. 66 here-in-before but 165 ltrs to 260 ltrs.
M&L for filling/charging Gas refrigerant R22/R134a/R438A in the sealed system of refrigerator of any make / capacity after checking leakage / pressure vacumising flushing the sealed unit including replacement of filter drier and capillary tube complete all as specified and directed
S & F in repairs starting relay with OLP kit suitable for any make Suitable for any / model refrigerator complete with testing and commissioning complete all as specified and directed
S & F in repairs of thermostat switch suitable for any model / model complete all as specified and directed
S & F in repairs electric Lamp 15 watt 230 volt AC thread / pin type suitable for any make / capacity of refrigerator complete all as specified and directed
S & F in repairs of door switch push type suitable for any make/capacity model of refrigerator complete all as specified and directed
S & F in repairs of condensing coil suitable for any make / model / refrigerator for the following capacity ( As per Sample ) :- (a) 300 / 310 ltr complete all as specified and directed
All as described Ser item No. 73 here-in-before but 165 ltrs to 210 ltrs.
S&F in repairs of PVC gaskit magnetic type for suitable for any make / any model / any capacity refrigerator complete all as specified and directed
S&F in repairs of cooling fan motor with metallic blade for any cap / any type complete all as specified and directed
S & F in repairs toughened glass partition for any cap / any make / any model complete all as specified and directed
S & F timer switch suitable for any make / any model /any size complete all as specified and directed
S & F in repairs compressor hermetically sealed type with suitable rated capacity electric motor and shall be equipped with over load and relay, 230Volt, 50 Hz, includind testing single suitable for water cooler 40/80 ltr capacity complete all as specified and directed
All as described Ser item No. 79 here-in-before but 60/120 ltr capacity.
All as described Ser item No. 79 here-in-before but 150 ltr capacity.
M&L for cleaning of water cooler tank from inner side with soda / Acid and de-scaling of water cooler to remove by brushing and soldering the leaking places and prepare the leak proof and complete all as specified and directed
Dismantling the blower motor of water cooler 1/32 HP capacity, 230 volts, SP and taking out burnt out copper winding wire from motor and M&L for rewinding the electric motor with super enameled copper winding wire of same size and gauge including insulation material, varnish and bush, shaft and refixing the motor complete & testing on full load complete all as specified and directed Note:- Spare parts required to make functional the equipment shall be measured and paid seperatlly under relevant items as S & F in repairs.
All as described Ser item No. 83 here-in-before but 1/6HP for 150 ltr water cooler / AC
S&F in repairs of starting relay No. 522 / 1622 for water cooler complete all as specified and directed
S&F in repairs of starting capacitor 40-60 mfd 220 Volts complete all as specified and directed
All as described Ser item No. 86 here-in-before but for capacitor 60-80 mfd 220 Volts.
All as described Ser item No. 86 here-in-before but for Running capacitor 15 mfd, 415 volts.
All as described Ser item No. 86 here-in-before but for capacitor 10 mfd, 415 volts .
All as described Ser item No. 86 here-in-before but for capacitor 36 mfd, 415 volts .
S & F in repairs of PVC float valve with rod and plastic ball suitable for 1/2" bore of water cooler complete all as specified and directed
S & F in repairs of LDPE 25 mm dia flexible pipe heavy duty with suitable clamp complete all as specified and directed
S & F in repairs PVC pipe flexible type 32 mm dia for waste water draining complete all as specified and directed
S & F in repairs over load protector (OLP) for water cooler of any capacity complete all as specified and directed
S & F in repairs self closing push cock 15mm bore chromium plated brass heavy duty long body inner threaded complete all as specified and directed
S & F in repairs aluminium blade for blower motor of water cooler 80 ltrs to 150 ltrs complete all as specified and directed
S & F in repairs open type relay : CAJ-2612 complete all as specified and directed
All as described Ser item No. 97 here-in-before but CAJ-3612 complete all as specified and directed
S & F in repairs thermostat of water cooler of any type make complete all as specified and directed
S & F in repairs blower motor 1/32 HP 230 volt suitable for water cooler complete with base frame/and rubber bush make AUE/GE for 60 to 150 ltrs complete all as specified and directed
S & F in repairs drip tray made of stainless steel complete suitable for water cooler any make of 40 to 150 ltr capacity complete all as specified and directed
S & F in repairs water tank gasket for water cooler 40/80 ltr cap complete all as specified and directed
S&F in repairs wiring kit complete for water cooler complete all as specified and directed
S & F in repairs compressor hermetically sealed with suitable rated capacity electric motor and shall be equipped with over load and relay, 230 volt , 50 Hz , including testing suitable for Deep freezer of capacity 200 / 300 Ltrs complete all as specified and directed
All as described Ser item No. 104 here-in-before but 400 / 500 ltrs capacity complete all as specified and directed
M&L for Filling charging gas refrigerent R12/R22/R-404A in the sealed system of Deep Freezer any make and capacity after checking the leakage / pressure vacuminising flushing the sealed system including replacement of capacity Tube, copper pipe for jointing, Gas filter complete all as specified and directed
S & F in repairs starting relay as per sample for deep freezer complete all as specified and directed
S & F Voltage Stabilizer 5 KVA with input variation between 130V to 250V with output voltage stabilized at 220 to 240V with accuracy of +/- 2.5%. Including taking down old one and depositing to MES store yard complete all as specified and directed.
S & F Voltage Stabilizer 4 KVA with input variation between 170V to 250V with output voltage stabilized at 220 to 240V with accuracy of +/- 2.5% including taking down old one and depositing to MES store yard complete all as specified and directed.
Taking out of water purifier (Aqua guard) or any other make / model and servicing , repair / replacement of spare parts of water purifer complete all as specified and directed. Note:-Spare parts required to make functional the equipment shall be measured and paid separetelly under relevant items as S & F in repairs
S & F in repairs pre filter candle (as per sample) kept in office of AGE E/M complete all as specified and directed
S & F in repairs Activated Carbon filter complete all as specified and directed
SS & F in repairs SMPS/PCB circuit electric plate complete all as specified and directed
S & F in repairs ultra violet lamp unit complete all as specified and directed
S & F in repairs of PVC pipe nylon braided heavy duty suitable for water partition inlet connection and as required at site complete all as specified and directed
S & F in repairs of chromomum plate tee 15/8 mm with valve for existing GI pipe connection complete all as specified and directed
DESERT COOLER Servicing / Disconnection desert cooler fan from desert cooler for repairing including cleaning, greasing,oiling , welding or M'seal at leaking place and refixing back after repair in original position . Note:- Spare required to make functional the equipment shall be measured and paid separately under relevant items as S & F in repairs
S&F in repairs rewinding desert cooler fan motor upto 4000cum cap any type/any model/make complete all as specified and directed
All as described Ser item No. 118 here-in-before but 6000cum cap complete all as specified and directed.
S & F in repairs of capacitor 4 mfd for kit fan / Exhaust fan complete all as specified and directed
S & F in repairs of PVC water distributer 3 way / 4 way for desert cooler of any size / capacity complete all as specified and directed
S&F in repairs of PVC elbow suitable for desert cooler of any size / capacity complete all as specified and directed
S & F in repairs of PVC flexible pipe 15 mm dia suitable for water distribution system of Desert cooler of any size / capacity complete all as specified and directed
S & F in repairs of Vertical lifting pumps 1/70 HP, 230 Volts single phase complete all as specified and directed
S& F in repairs of Sumersible pump suitable for desert cooler/ industrial cooler complete upto 4000/6000 cum complete all as specified and directed
S &F in repairs of wood wool padding of desert cooler of suitable size 4000cum in wire net complete weight not less than 450 gms complete all as specified and directed
S &F in repairs of wood wool padding of Industrial type cooler of suitable size 6000cum in wire net complete weight not less than 450 gms complete all as specified and directed
S& F in repairs side shutter (set of three) for desert cooler of as per sample 22 gauge PGI sheets grill type complete all as specified and directed
Supply & install new desert cooler (steel body) 4000 cum per hour,electric driven, 1 phase, 240 volts, AC heavy duty long body exhaust fan motor with , submersible water pump, ISI marked 3 core 1.50 sqmm pvc copper cable of minium 2 mtr long with plug top and control switches etc complete all as specified and directed
S & F fan motor copper wounded suitable for desert cooler 230 volts, 50 Hz, single phase AC supply of capacity 4000 Cum complete all as specified and directed
S & F fan motor copper wounded suitable for Industrial desert cooler 230 volts, 50 Hz, single phase AC supply of capacity 6000 Cum complete all as specified and directed
S & F fan motor of Industrial cooler 3 phase, 415 V ,6000 Cum complete all as specified and directed
S & F 3 core 1.5 sqmm copper flexible wire complete all as specified and directed
S & F in repairs of Mettalic fan blade for desert cooler motor 4000 Cum complete all as specified and directed
S & F in repairs of Mettalic fan blade for Industrial desert cooler motor 6000 Cum complete all as specified and directed
S & F in repairs of 3 pin plug top 5 Amps complete all as specified and directed
M & L for dismantling and removing the existing Geysers of 25/50 Ltrs capacity any type, any make, from various lacations of GE (N) Meerut area after disconnecting the water connection, electric connection for repair / painting / replacement of defective parts, opening the geyser assembly and descalling with hydrochloride solution fixing of geyser assembly , cleaning up inner tank including repair of rubber seal, ring nuts, bolts, washers GI bottom cover and other connected works, pressure testing, refixing at it's original location, connecting complete all as directed Note:-(i) Spare parts require to make functional the equipment shall be measured and paid seperately under relevent item as S&F in reepairs. (ii) Minor spares and consumables like screws, washers, cleaning agents, consumables etc. is deemed to be included in the quoted rate).
S&F in repairs fusible plug made out of brass with internal or external threading suitable for any type, any make geyser of capacity 25 / 50 Ltrs complete complete all as specified and directed.
S&F in repairs Inner assembly with heat resistant rubber ring washer incl nuts, bolts, clamps, suitable for 25 Ltrs capacity Geyser any type, any make ISI marked, complete all as specified and directed
All as described Ser item No. 139 here-in-before but 50 Litre complete all as specified and directed.
S&F in repairs Heating element of 1.5 KW suitable for any type, any make geyser, 240V, AC, ISI Marked, with heat resistant rubber washer, connecting complete all as specified and directed.
All as described Ser item No. 141 here-in-before but 2.0 KW complete all as specified and directed.
S&F in repairs thermostat control unit suitable for any type, any make 25 / 50 Ltrs capacity geyser, 30-90 degree rating, 240V, AC, ISI Marked, connecting complete all as specified and directed.
S&F in repairs non-return valve made out of brass 15mm bore ISI marked complete all as specified and directed
M&L for making hole in wall, Grouting 4Nos Rag Bolts of size 125mm long x 12mmm dia in PCC on wall including suitable nuts and washers for fixing / hanging geysers, complete all as specified and directed
S & F in repairs PVC sheathed,PVC insulated multi stranded copper conductor, 3 core, flexible cable, 1100 V grade, 2.5Sqmm, AC, connecting complete all as specified and directed
S & F in repairs for plug top 3 pin 15 Amps capacity complete all as specified and directed .
S & F in repairs Zebra fastner of size 12x100 mm complete all as specified and directed .
S & F in repairs modular Power Unit 20A, 3pin, AC, 240V ISI Marked incl FRP Box and 01 No's 16 Amps MCB SP complete all as specified and directed
S & F in repairs SPN metallic enclosure with a two pin and earth plug and socket with one MCB SP 20 Amps incl taking down old one & making good to walls etc including two coats of white / colour washing / distempering etc complete all as specified and directed
S & F in repairs GI tubing medium grade with all fittings and fixed to walls/ceiling/floor or laid in trenches of 15 mm bore size all as specified and directed
All as described Ser item No. 151 here-in-before but 20 mm bore size
S&F in repairs gun metal or globe or gate valves 20 mm dia with iron wheel scewed both ends complete all as specified and directed
S&F in repairs gun metal or globe or gate valves 15 mm dia with iron wheel scewed both ends complete all as specified and directed
S&F in repairs Float valve 20mm dia high pressure with polythene float valve and fly nut complete screwed complete all as specified and directed.
Supply, Install, Test & Commissioniong in repairs, Electric Water Storage Heater (Geyser) 25 Ltrs capacity, AC, 230V, Vertical Type, 5 Star Rated, ISI Marked Complete including suitable size Anchoring / Grouting Bolts with Nuts & Washers, necessary grouting in PCC including Note:- old unserviceable one and depositing to MES store yard complete all as specified and directed.
S & F in repairs sub main wiring with 04 Sqmm nominal cross sectional area, two single core, 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including one run of continuous earth wire of size 4 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all PVC conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing taking down old unserviceable sub main wiring complete all as specified & directed.
AIRCOM (BID ID -3336386)
NP ENTERPRISES (BID ID -3334517)
Gupta Automobiles (BID ID -3336252)
CHAUDHARY FURNITURE HOUSE (BID ID -3336301)
K S Enterprises (BID ID -3335776)
CHOUDHARY ELECTRICAL (BID ID -3336958)
SIYA ASSOCIATES (BID ID -3344513)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .