SPL REPAIR BLDG NO. T-112( SM OFFICE), T-2, T-2A AND SPL REPAIR/REPLACEMENT OF CENTRIFUGAL PUMP SET AGAINST BER INCLUDING CONNECTED ITEMS AT AGE B/R-II AND AGE E/M UNDER GE BABINA

Amount

Taking down chowkhat or frame (without taking off shutter from the frame) not exceeding 1.5 Square Metre each , removing from the site Cutting holes exc 150 Sq.cm but n.exc 400 Sq.cm in super facia area into or through brick walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and as directed.

Taking down chowkhat or frame (without taking off shutter from the frame) exceeding 1.5 sqm and not exc 4.00 sqm each , removing from the site Cutting holes exc 150 Sq.cm but n.exc 400 Sq.cm in super facia area into or through brick walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and as directed.

Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each complete all as specified and as directed.

M&L for PCC 1:3:6 type C0 (12.5mm stone agrregate) for filling in pressed steel frames and like complete all as specified and directed

M & L for Powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors , windows , ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

M & L for Powder coated (minimum thickness of powder coating 50 micron) aluminium window and ventilator (adequate track)/Shutter without sash, aluminium section weighing 0.55 kg/m including joining cleats, glazing clips, rubber neoprene packing, necessary powder coated hardware ie. handles, barrel tower bolts, hinges etc, powder coated aluminum snap beading, screws etc. complete all as specified and directed Note : Panel filling ie. glass, fibre sheet, board, wire mesh etc. shall be measured and paid for separately.

M & L for Powder coated (minimum thickness of powder coating 50 micron) aluminium door shutters of aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing, powder coated aluminium handles 150mm size 2 Nos, 3 Nos powder coated aluminium hinges heavy duty and 02 Nos 150mm long powder coated aluminium tower bolts in each door shutter with powder coated aluminum snap beading, screws etc. complete all as specified and directed Note : Panel filling ie. glass, fibre sheet, board etc. shall be measure and paid for separately.

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-Charge.?

Supply & Fixing solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube fixed in opening as per specification & drawings complete all as specified and as directed.

S &F for factory made solid panel PVC door shutter 30mm thick ( style) consisting to frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Penelling of plain colour PVC sheet to be fitted in the MS. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and as directed.

All as per item No 10 above but wire gauge panel i.e panel should be wire gauge in lieu of PVC sheet panel .wire gauge shall be wraped on a additional squre tube 8 mm M.S. solid tube shall be welded to M.S tube and wire guage shall be strechtd tightly firmed complete all as specified and as directed

S&F Locally available30 mm thick Flush shutters ,soild core construction ,with paticle board core and plywood face panels , commercial type both face is covered with decorative face veneer with lipping /frame to match and complete all as specified and directed.

S/F Factory made single extruded WPC (Wood Polymer Composite ) solid plain flush door shutter of 30 mm size class A category with property of being termite /borber proof ,water /moisture proof and fire retardant anf fixing with stainless steel butt hinges of required size wit necessary full body threaded star heaaded counter sunk ss screws all as per direction of engineer in charge complete all as specified and directed..

M&L for New surface of wood and wood based material any description and in any position over 10 cm width or girth and M&L for applying two coat of synthetic enamel paint over one coat pink primer complete all as specified and as directed.

S&F in repair for floor door stopper of brass body and tongue, overall length of cover plate 150 mm , anodized, with hard drawn steel spring , fixed to shutters complete all as specified and as directed.

S&F for butt hinges , extruded aluminium alloy with galvanised mild steel hinge pin anodised of100 mm size and fixed type C-21 complete all as specified and as directed.

S&F for Extruded aluminium alloy handle of 150 mm size fabricated type, anodised complete all as specified and as directed.

S&F for aluminium anodised barrel tower bolt of 150mm of extruded section complete all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S&F MS 150 mm ordinary rat tail springs plate type incl.rollar plate etc.complete all as specified and as directed.

S&F galvanised wire cloth, 0.48mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised staples complete all as specified and directed

S&F for framed work such as grills gratings, etc, with ends of bars shouldered and or riveted , or forged into spikes, framed guard bars , barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290,E-165 , complete all as specified and directed.

Demolition of cement concrete of any description and in any position (unreinforced) in ground floors and paving not exceeding 15 cm thick (below or above GL) complete all as specified and directed.

Demolition of cement concrete of any description and in any position reinforced concrete (re-inforcement cut to facilitate demolition) including disposal of unserviceable of mateial complete all as specified and directed. Note:Demolition material throughout MOD Land rate include above item

Excavation over area as in soft / loose soil nexc 1.5 m deep and getting out complete all as specified and as directed.

Dismantiling of stone slabs and tiles (Kota stone etc.) of any discription or any thickness in floors, aprons, skirting, dado, pcc tiles at roof etc. laid bedded and pointed in any mortar complete all as specified and directed.

Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) complete all as specified and directed.

M&L moorum /red bajri filling in floors or paving laid in layers n exc 15cm thick spread leveled and rammed including watering complete all as specified and directed by Engineer in charge.

M&L 75mm thick PCC (1:3:6) Type C2 using 40mm graded stone agg as in plinth protection/Path etc surface even and smooth without using extra cement complete all as specified and as diected by engineer in charge.

M&L 25 mm thick cement concrete (1:2:4) type B-0 (12.5 mm graded stone aggregate) as in floors,finish rough to receive th\e floor finishes etc complete all as specified and directed.

M&L Granite slab 18 mm to 20 mm thick machine cut, bedded and joined with cement and pointed with white cement with admixture of pigment to match over and including 20 mm thick screed bed CM (1:3) .the shade of granite stone including cutting and polishing type as in cill and jamb/skirting, steps cooking plateforms includigng rounding off the exposed edges and polishing all as specified and directed..

M&L for vitrified ,coloured and printed tiles of 8 to 10 mm thick (Square / Rectangular ) polished area of each tiles not exceeding 0.36 Sqm as in flooring over and including 15 mm thick cement screed in (1:6 ) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.

M&L for vitrified ,coloured and printed tiles of width as directed and 8 to 9 mm thick as in skirting fixed over and including 10 mm thick backing coat in (1:4 ) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.

M&L for digital glazed ceramic tiles, coloured tiles 300mm x 600 mm x 7mm thick on vertical faces ie. as in skirting/dado etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles fix over and including 10 mm thick backing coat in cement mortar (1:3) complete all as specified and directed.

M&L for non skid ceramic Coloured tiles, 300mmx300mmx 6 mm to 7mm thick, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match with the colour of tiles, over and including 15 mm thick screed bed or bedding layer of cement mortar( 1:6) complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls etc. including racking out joints hacking for key scrubbing down with water complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar (1:4) on brick / concrete/ stone surfaces finished even and smooth without using extra cement complete all as specified and as directed. Note : Water proofing compound shall be measured and paid separately under appropriate item of BOQ as "supply only "

M&L for 15 mm thick rendering in cement mortar (1:6) on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Supply only Liquid water proofing compound complete all as specified and directed.

M&L for preparation of newly plastered sufaces of walls & applying two coat of cement base paint over a coat of primer complete all as specified and directed.

M & L for two coat of oil bound emulsion paint over a coat of Birla wall care putty on plastered surfaces on wall including preparation of surfaces complete all as specified and directed. .

M&L Complete removal of existing treatment (internal and external suraces) on walls by scrapping with steel wire brush or any other means including one coat of wall care putty on wall and applying two coat of oil emulsion complete all as specified and directed by Engineer -in-Charge.

Material and labour for Preparation of old decorated surface of walls of plastered or unplastered surfaces by brooming down or steel wire brushing, scarping down smoke soot, moulds, moss and efflorescent salts treating oil and greasy spots and applying two coat of white wash complete all as specified and directed by Engineer -in-Charge.

M&L preparation of surfaces of walls by scrapping/sand preparing / rubbing and finally washing with watering and applying two coats of exterior emulsion acyrlic weather proof antifungal paint over a coat of exterior grade primer upto 08 meter height of the bldg, complete all as specified and directed.

M&L for preparation of the newly plastered surfaces of wall & applying three coats of white wash on Walls surfaces complete all as specified and directed.

Excavation in trenches not exceeding 1.5M wide and not exceeding 1.5M in depth for sewage line, manhole etc not exceeding 10 sqm on plan and getting out in any type of soil complete all as specified and as directed.

Demolition and breaking drain pipe (salt glazed stoneware) of 150mm dia set in cement mortar including packing under and haunching against side of pipe complete all as specified and as directed.

M & L cement concrete bed to drain pipe 150mm dia including packing under and haunching against side of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate complete all as specified and as directed.

Supplying, laying, jointing and testing salt glazed stone ware drain pipe 150mm dia grade ‘A’ laid in trenches and jointed in cement mortar 1:1 complete all as specified and as directed.

M & L PCC 1:2: 4 type B-1 using 20 mm graded store aggregate as in surface channel, drains etc including use and waste of form work where necessary complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using forms, moulds, mitred/stopped ends etc.complete all as specified and as directed.

Returning, filling in, including spreading, watering and well ramming in layers n. exc 25 cm thick in any type of soil complete all as specified and as directed.

M&L precast re-inforced Cement Concrete 1:2:4 type B1 (using 20mm graded stone agg) as in cover slabs for man holes etc set in cement mortar 1:6 including necessary form work complete all as specified and directed.

Demolition of brick work /stone work built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.

Removing excavated material nexc 50m and depositing where directed at a level nexc 1.5Km above the starting point with soil complete all as specified and as directed.

M&L Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:6).complete all as specified and as directed.

Surface excavation n.exc. 30 cm deep and av. 15 cm deep and getting out in any type of soil complete all as specified and as directed.

M&L for PCC Type D2 (1:4:8) using 40mm graded stone agg as in foundation filling mass concrete, complete all as specified and directed.

Material and labour for providing and laying 60 mm thick factory made Locally available chamfered edge cement concrete paver block of M-35 grade with aproved colour, design & attern as in foothpath, parks, lawns, drive ways or light traffic parking etc. of required strenght, thickness & size / shape, made by table vibrating method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding / laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra cement complete all as specified and directed.

M&L for cement concrete ( 1:2:4) type B-1 (20mm graded agrregate) in lintels upto 1.5m clear span, cills, stes, seimic and other similar bands, plinth course, string course, lacing cours, arapets and railings upto 60cm in height, coping, kneelers, apex stones, bed plates, kerbs, water througs and the like including wheathering slightly rounded or chamfered angle and throating complete all as specified and directed.

M&L for preparation surfaces for building Nos and applying one coat of synthetic enamel paint and writing letters or figures (Block, Roman, Italic or Indian) of n exc 10cm height, width of letter shall not be less than 15mm, including stops, commas, lines, brackets and making outer boarder with approved tint of synthetic enamel thick paint complete all as specified and as directed.

Dismantling of wall and ceiling boards fibre pulp insulation etc or insulation boards/slabs/blankets any thickness including cover fillets, complete all as specified and directed.

S&F False ceiling 4 mm thick HPSC pre-prime non asbestos fibre cement building board ( size 600mm x 600 mm/ 595 mm x595 mm ) decorative finish fixed with clips and screw including powder coated galvanised MS grid frame work false ceiling of ( Main Tee size 32mmx20mmx0.45mm cross tee 24mmx24mmx0.30mm and wall angle19x19x0.30 mm ) and with slot for fixing including suspended with1.25 mm dia. GI wire hangers fixed with steel dash through fasteners from purline of the roof complete all as specified and as directed.

Dismantling of AC (corrugated / semi-corrugated) sheets in roof covering including any type of ridges complete all as specified and as directed.

S&F Pre painted galvalum sheet 0.50 mm thick having aluminum zinc coating 150 gsm/ sqm corrugated steel sheet any colour having tensile strength of 550 Mpa as in Roof covering /cladding to wall fixed with self tapping screws complete all as directed by Engineer -in -charge.

S&F Pre painted galvalum sheet 0.50 mm thick having aluminum zinc coating 150 gsm/ sqm plain steel sheet any colour having tensile strength of 550 Mpa as in Roof covering /cladding (ridge) to wall fixed with self tapping screws complete all as directed .

M&L Hand rails, half round or other stock section or core for wooden hand rail straight portion , drilled and counter sunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing post including cutting tops to shape as directed, drilling holes, notching for wire , etc.; flat iron fillets ( for securing wire mesh etc. including all necessary drilling , bolting or rivetting , etc., and similar work conforming to Fe 290 Gde E 165 with and including applying two coats of synthetic enamel paint over a coat of primer alround before fixing in position complete all as specified and directed

Dismantling timber scantling , framed /un framed work of 40 sq. cm and over in section in any position complete all as specified and as directed.

Dismantling of wrought iron or mild steel work of any description not other wise provided for complete all as specified and as directed.

S&F rolled section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates confirming to Fe-290 ( Gde E-165) complete all as specified and directed

M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces over 10 cm width or girth including preparation of new surfaces.complete all as specified and as directed.

M&L for Cutting of cracks to V section in existing wall surface, cleaning out, wetting, grouting with cement and sand slurry 1:3 etc complete all as specified and directed.

M&L for reinforced cement concrete nominal mix type B1 (1:2:4) ( using 20 mm graded stone aggregate ) as in beams , cantilevers bressummers , lintel over 1.5 m span etc. complete all as specified and directed.

M&L for use and waste Formwork to sides & soffits of floor or roof beam rough finished surfaces of concrete complete all as specified and directed .

S&F mild steel bars 10 mm dia and over (TMT) cut to length bent to shape required including cracking,bending spirally for hooping ends and binding with and including mild steel wire not less than 0.90 mm dia quality of steel conforming to Fe-410-0 or Fe-410-S. complete all as specified and as directed.

S&F TMT bars 6 to 8 mm dia cut to length bent to shape required including cracking,bending spirally for hooping ends and binding with and including mild steel wire not less than 0.90 mm dia quality of steel conforming to Fe-410-0 or Fe-410-S. complete all as specified and as directed.

Dismantling boarding any description fixed with nails in any position (including cup board shutter/shelve upto 25mm thick) complete all as specified and as directed.

S&F for 18 mm thick PVC Celuka ply of one side prelaminated and other side plain white colour fixed with screws ,solvent cement /adehesive complete all as specified and as directed.

S&F for 12 mm thick PVC Celuka ply of both side prelaminated and other side plain white colour fixed with screws ,solvent cement /adehesive. complete all as specified and as directed.

S&F for aluminium anodised barrel tower bolts of extruded section of 100mm size, complete all as specified and directed.

S&F for continuous (piano) hinges mild steel bright finish or electro galvanised width of width of flaps nexc 30 mm (when open), complete all as specified and directed.

S&F for extruded aluminium alloy handle of 100 mm size fabricated type, anodised.complete all as specified and as directed.

S&F for Haps and staple safety type Aluminium anodised with MS hinge pin including bolt to hinge pin of 100 mm size sixed with screw complete all as specified and as directed.

S&F for magnate catcher of metal body and striking plate heavy duty includind fixed with screw, complete all as specified and directed.

Dismantling of timber in fillets, rails, posts, rafters, purlins etc under 40 Sq. cm provided for complete all as specified and as directed.

Excavation in post holes (or similar holes) each n. exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n. exc 50m and making good surface in soft/loose soil complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Dismantling of fencing wire mesh any type ( barbed wire) fixed with steel or wood fillets in any position complete all as specified and directed.

M/L for providing PCC 1:3:6 type C2 using (40mm graded stone aggregate) in foundation filling and mass concrete complete all as specified and directed.

Supply only, chain link fencing of MS galvanized fencing, any size or type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh , size and type fixed to any type of standards, rails, straining bolts, etc., incliding provision of binding wire complete all as specified and directed Note : Supply only chain link fencing and line wire will be measeured and paid separetly.

S&F mild steel round bars 10mm dia and over cut to length bent to shape required including cranking, bending, spirally for hooking ends stiffeners confirming toFe 290 (Gde E-165). complete all as specified and directed

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed to other, or screwed both ends, each screwed end to be fitted with washers and hexagonal or square nut length of bolt exc 5cm but n.exc 10cm long and dia of neck 11 to 15mm complete all as specified and directed.

S&F 5mm thick hollow wall panelling plain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining,Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of solvent cement and fixing at site including disconnecting and refixing of electric light board complete all as specified and as directed.

M&L for vitrified paver color tiles 40 cmx40cmx9 to 10 mm thick, moulded set jointed and pointed in neat cement slurry with grey cement and pigment, in floors, over and including 15 mm thick screed bed or bedding layer of cement mortar (1:6) complete all as specified and directed.

Taking up or down steel tubing and connetion including cleaning for refixing or removing to store of 20mm bore of pipe, complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning for refixing or removing to store of 25mm bore of pipe, complete all as specified and directed.

supply and laying 20 mm dia .of bore CPVC pipe SDR11 and Plain CPVC SDR11 fittings (ISI ) marked ,concealed or fixed to wall or laid in floors complete all as specified and as directed

Supply and laying 25 mm dia .of bore CPVC pipe SDR11 and Plain CPVC SDR11 fittings (ISI ) marked ,concealed or fixed to wall or laid in floors complete all as specified and as directed

S&F for as in repair viterous china wash down water closet pan (pedestal pattern) white excluding fixing bolts,flushing cistern and flush pipe including connection to drain and to flushing pipe syphonage pipe etc and mild steel chromium plated or aluminised hinges device & on CP Jet complete all as specified and directed.

S&F in reapir plastic water closet seat covered white coloured closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging devise complete all as specified and directed.

S&F for in repairs of vitreous china wash basin, white, oval type, size 550 x 400mm Including waste coupling ,waste pipe and labour for fixing pillar tap ,pvc connection but including cutting for and pinning in ends of and including brackets complete all as specified and directed. . Note : Pillar tap and PVC connection will be measured paid separetly.

S&F in repair PVC valveless syphonic action type flushing cistern low level white with inlet ball valve,float end handle handle including bracket complete of capacity 10 litres, complete all as specified and directed.

S&F in repairs15mm,pillar taps ISI Mark Fancy type long body chromium plated,cast copper alloy, with brass ceramic disc spindle and capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe complete all as specified .

S&F in repairs 15mm angle cock ISI Mark chromium plated,cast copper alloy, with brass ceramic disc spindle and capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe fixed and complete all as specified .

S&F 15mm ,bib tap ISI Mark Fancy type long body chromium plated,cast copper alloy, with brass ceramic disc spindle and capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe fixed in repair and complete all as specified

S&F for shower rose brass chromium plated without swivel joints, 100 mm in size including fixing to steel pipe complete all as specified and directed fixed in repairs, complete all as specified and directed.

S&F for in repairs for 15 mm Stop valve cast copper alloy screwed down high pressure with CAPSTON HEAD handle chromium plated with long shank and cup (concealed type) screwed both ends for iron pipe 15mm bore or for unions complete all as specified and directed.

S&F in repairs Soap dish of CP fixed with PVC rawal plugs and screw, complete all as specified and directed.

S&F in repair CP tubular towel rail D type 20mm dia and 60cm long complete all as specified and directed.

S&F peg set of six S.S. fixed to wall with PVC plugs and screw, complete all as specified and directed.

Supply only 15mm dia PVC connection with PTMT nuts of length 450 mm, complete all as specified and directed.

S&F in repairs Brass CP WHB mixer for mixing hot & cold water screwed down for 15mm bore iron pipe complete all as specified.

S&F in repair Health faucet with 1.00 metre tube ( Branded tube ) including flexible pipe and brass chromium plated nuts completed all as specfied and directed.

S&F in repair Flushing jet Spray (chromium plated) for padestral pattern EWC including 1.00 metre tube flexible pipe and brass chromium plated nuts completed all as specfied and directed

S&F in repairs for wall mixer with Two in one pattern in of brass CP, complete all as specified and directed.

S&F Single Lever Sink Mixer With Swinging Spout on Upper Side (Wall Mounted Model) With Connecting Legs & Wall Flanges complete all as specified and as directed.

S&F in repair 2 Way Chromium plated angle cock with flange Complete all as specified and directed.

S&F for in repairs mild steel Chromium plated grating 100 mm dia, fixed in repair, complete all as specified and directed.

S&F 1000 litre capacity of rotational moulded polyethylene water storage tank white colour multilayered construction, ISI marked of make specified (cylindrical vertical with closed top) hoisted and fixed in position including S&F 20 mm dia GI pipe medium grade washout pipe 450 mm long with plug and 20 mm dia GI pipe medium grade overflow pipe 600 mm long with fittings complete all as specified in SSR Part-I complete all as specified and as directed.

S&F for 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 m m - 210 gms / 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.

S&F in repair gun metal globe / gate valve with iron wheel head screwed both ends for iron pipe of 20mm bore, complete all as specified and directed.

S&F in repair sinks with drainage board made out of stainless steel 0.90 mm thick kitchen or laboratory with ;plugs, washers, and waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, and connecting union to pipe overall size 915 mm x 460 mm with bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed .

S & F in repair for plate rack made out of .90 mm thick stainless steel of wire type / sheet pattern size nad type as directed by Engineer In Charge and approved by GE fixed to wall with necessary fitting arrangement Complete all as specified and directed.

S&F for sinks made out of stainless steel 0.90 mm thick kitchen or laboratory with ;plugs, washers, and waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, and connecting union to pipe overall size 495 mm x 420 mm with bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed fixed in repair.

S&F in repair for PVC bath room cabinate mirror of Size 500mmx400 mm complete all as specified and directed.

S&F 25mm dia stainless steel curtain rod not less than 0.80mm thick including fixing of sufficient brackets ( minium 2 nos at every 1.50m length) & end Knobs complete all as specified and directed by Engr in Charge

Taking down eaves gutters and rain water pipes (any size 75mm to 110mm of any pattern) ,of any description and in any position, including all fittings , heads, shoes, bends, swan necks, etc., (measured overall as fixed along the centre line over fittings and accessories)complete all as specified and as directed.

S&F for 110mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls complete all as specified and as directed.

S&F for 75 mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls. complete all as specified and as directed.

S&F for 75 mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints,laid in trenches or in floors complete all as specified .

S&F for 110mm dia PVC(SWR)pipes bends any radious \ complete all as specified and directed.

S&F for 75 mm dia PVC(SWR)pipes bends any radious. complete, complete all as specified and directed.

S&F for 110mm dia PVC(SWR)pipes junction,single (single T/Y ) equal or unequal any radious.with acces door, complete all as specified and directed.

S&F for 110mm dia PVC(SWR) vent cowl, complete all as specified and directed.

M&L for 75 mm dia of out let PVC (SWR) floor trap plain with CP grating including jointing with solvent cement as in repair complete all as specified and as directed.

M&L for PVC (SWR) gully trap 125 /100 plain with grating incl. jointing with solvent cement as in repair, complete all as specified and directed.

Taking down and re-fixing including erection of Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.Fe-290 Gde E-165 complete all as specified and as directed.

M&L for old size Brickwork for fly ash bricks, straight or curved on plan exc 6m mean radius, built in cm (1:6), rise of hight for brick wall complete all as specified and as directed.

M&L for Brickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4) complete all as specified and directed.

M&L for double charged vitrified ceramic tiles 8 to 9 mm thick (square / rectangular) polished area of each tile exceeding 0.18 sqm but not exc 0.36 sqm, in Vertical surfaces such as skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to floor etc including 15 mm screed bed with CM(1:6) complete all as specified and as directed.

M&L Machine cut kota stone slab flooring 18-20mm thick over and including 15mm thick cement screed bed in CM 1:6 laid laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Demolition of Roofs, floors (other than ground floors), beams staircases, landing, chajjas, & similar suspended work Cement concrete (reinforced) complete all as specified and directed.

M&L RCC type B1 (1:2:4) using 20 mm graded aggregate in Slabs/beam supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; not exc. 200mm thick (Horizontal or sloping) Rough finished surfaces of concrete flat complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coats of cement base paint on external wall surface over a coat of alkali resistant primer over one coat of putty complete all as specified and as directed.

M&L, preparing for old steel surfaces and applying one coats of synthetic enamel paint over 10 cm width or girth complete all as specified and as directed.

S&F 12 mm thick prelaminated particle board exterior grade with both side laminated and fixed to aluminium frame complete all as specified and directed.

S&F in repair for aluminium die cast body door closer hydraulically regulated designation No 3 universal type, suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80 Kg complete all as specified and directed.

S&F in repair of door seal 20 to 25 mm wide 0.9 to 1.0 m length with GI Powder coated flap fixed to doors shutter with screws, complete all as specified and directed.

Taking down and refixing of aluminium frame work/ partitions in same opening or as required at site and as directed by EIC. Note: Rubber beading or glass to be mesured and paid sepratly as required at site.

S&F in repair EPDM rubber gasket /Glazing bead packing around the glass complete all as specified and as directed.

Taking down carefully copper/ aluminium point wiring (light, fan, socket, or power) complete fitting such as switches, ceiling roses pendants, regulators, sockets, light fitting ceiling fan etc to be measured seperately ) removing materials for keeping in safe custody or for taking credit (credit for above items should be made as per conditions seperatly) and making good disturbed surface of walls floors etc all as specified and directed. Note-Responsibility after taking down fan/exhaust fan keep in safe custody of contractor and refix the same after before completion of work the rate of same deemed to be included in the item quoated rate.

Taking down carefully existing wooden board , Main switch, MCB DB boxes with MCBs, sheet metal boxes, cut out, etc of any size any capacity from boards complete all as specified and as directed.

Taking down carefully sub main wiring / service connection twin core from wall / LT pole of any size of Aluminum with wooden batten and or through rigid conduit including GI wire and making good the disturbed surfaces of walls, roofs, floors etc complete all as specified and as directed.

M & L for concealed point wiring for One light point controlled by one switch complete with PVC insulated and unsheathed flame retardant low smoke and halogen (FRLSH ) cable of 1.5 sqmm (nominal area) with multi stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit not less than 20 mm dia, clip, with MS terminal boxes (not less than 1.6 mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including common earth dolly with 3 mm thick plastic laminated sheet top cover of approved make and colour including 1.5 sqmm green multi stranded copper conductor as continuous earth wire with lugs complete including cutting necessary chases on wall / ceiling surfaces for drawing of conduit & cables as required and making good disturbed surfaces of walls with CM 1:3:6 and matching with the existing surfaces including colour washing all as specified and as directed.

Description same as per item No 181 above but one fan point controlled by one switch & regulator.

Description same as per item No 181 above but One 3/5 pin 5 Amp socket outlet point controlled by one switch on independent board.

Description same as per item No 181 above but One 3/5 pin 5 Amp socket outlet point controlled by one switch on same board.

Description all as per item No 181 above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed flame retardant low smoke ( FRLS ) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with 2.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed.

S&F switch piano flush button type 5 Amp single pole one way complete all as specified and as directed.

S&F socket outlet 2in1, 3 pin, 5 Amp flush type complete all as specified and as directed.

S&F switch piano flush button type 15 Amp single pole one way complete all as specified and as directed.

S&F socket outlet 2in1, 3 pin, 5 Amp and 15 Amp flush type complete all as specified and as directed.

S & F delux Fan Regulator electronic rotary, step type 240 Volt 50 Hz, complete all as specified as directed.

S & F Lamp holder, PVC suitable for batten fittings complete all as specified as directed

S & F 9W/10W LED retrofit lamp B-22 holder base with polycorbonate body and aluminium heat sink complete all as specified as directed.

S&F ceiling rose,surface polycarbonate 63 x50mm three terminals complete all as specified and as directed.

M & L for Sub main wiring power/circuit using PVC insulated unsheathed FRLS, stranded copper conductor cable 2 Single core of size 4 sqmm, earth continuity conductor of size 4 sqmm to be drawn through in and including PVC conduit 25 mm dia medium grade concealed in walls/roof complete. Notes:- Two wires of 4 sqmm and one wire of 4 sqmm as earth & PVC conduit shall be measured as one unit. Note: (i) New pvc conduit should be used not less than 25 mm dia. (ii) pvc conduit shall be deemed to be included in quoated rate itself. (iii) Cutting, chasing, plastering, painting etc for fixing of PVC ciondutit /pipe are deepmed to be included in quoted rate.

S&F sheet metal enclosure double door concealed suitable for distribution boards when MCBs to be used having 100 Amp rated bus bar SPN DB 6 ways 240 V complete all as specified and as directed .

S&F MCB single pole and neutral 32 Amp 240 V ,10KA , 'C' series, complete all as specified and as directed with copper lugs complete all as specified and as directed.

S&F MCB single pole 6 to 32Amps 240 V,10KA, 'C' series,complete all as specified and as directed

S &F LED tube light fittings decorative ultra slim linear fixture with extruded aluminium heat sink envioromental friendly Energy efficient ready to use pack ,1x20 Watt, 6000 K, 4 feet, surface mounting type extruded pvc, snap on installers and domestic electronic Driver, connector block etc with all accessories internally prewired & including connecting up with 2 core flexible copper conductor cable and mounting clamps complete all as speicified and directed.

Supply and fix LED 35W building security light fitting,5700 K energy saving & environmental friendly long life versatile pressure die cast aluminium IP 66.road way luminare with high power LEDs as light source and electronic driver suitable for pole dia 35 mm including 35 mm dia light grade tube bracket ,bend to shape 1.80 mtr length with two nos of clamps of size 50mm x 6mm with nuts and bolts,washers etcincluding connection with 1.5sqmm threesingle core PVC insulated and PVC sheathed cable stranded copper cable upto ceiling rose and fixing on walls/pole complete all as specified and directed.

M&L pipe galvanised iron of size 50 mm dia, light grade ISI marked, complete with fittings laid in trenches/ fixed with poles etc as protection to cables complete as ditrected by Engineer in Charge

M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick weithing not less than 17.5 Kg buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PT 1, 2009 with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switches, DBs) complete all as specified & testing on completion. NOTE:- (I) item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii) PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate.

Supply, installation, testing and commissioninng of monoblock centrifugal pump sets, suitable for pumping water 468 LPM discharge at 55 m head (not less than 10 HP), IP 55, cast iron body with gun metal/bronze impellers including fixing of safety valve, pressure guage and priming valve etc direct coupled suitable for operation on 3 phase, 415 V, AC, 50 Hz and mounted on channel iron base frame including nut, bolts & washers etc. PCC foundation, foundation nuts, bolts & washer as per manufacturer's instructions including cupper cable from starter to motor of suitable size and connection with SCADA panel all as specified & directed. Note : Old pump will be deposited to AGE E/M store yard by the contractor.

S & F in replacement of FASD starter in sheet metal enclosure suitable for 10 HP to 15 HP induction motor, 3 phase 440 volt complete with over load protection & adjustable relay range 13-21A, incl provision of mounting arrangement with MS flat strips 40 mm x 5 mm thick of suitable length and shape duly drilled and embedded to wall incl making good disturbed surfaces incl dismantling complete all as specified. Make : L&T cat No SS95890DOCO or equivalent approved make.

M&L for earthing complete with galvanised steel earth plate electrode of size 600X600X6 mm thick buned directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.50 mtr below the ground level connected to gatvanised iron strip of 32 x 6 mm as earth lead by means of bolts nuts check nuts & washers of gatvanised iron or steel ,surrounded by charcoal of coke and salt, protected by Gl pipe 40 mm bore (light grade), water pipe 20mm bore Gl medium grade with funnel and wire mesh,and making chamber of PCC (1:4:8) type D-2 using 40 mm graded stone aggregate and coping shall be in PCC(1:3:6) type C-1 using 20 mm graded stone aggregate, 50 mm thick cover of RCC (1:2:4) type B-l using 20 mm graded stone aggregate, reinforced with 8 mm dia TMT bars @ 80 mm clc boath ways including excavation and earth work and removal of surplus soil to distance n exc 50 m complete all shown in electrical plate No 3 of SSR part- 2010 complete all as specified and directed. Note :-(l) The cost of Gl earth lead & G 1 pipe of 7.50 mtr length for protection of Gl wire and excavation work for pit shall deemed to be included in this item. (ii) Earthing test will be carned out and if desired result not achieved and the earthing will be redone to achieve desired result without any extra payment.(iii) Charcoal dust and common salt upto 1.5 meter depth shall be filled in layers of 15 centimeters all around the earth plate.

S& F earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or burried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 32 x 6mm GI strip complete all as specified and as directed .

S&F modular socket 20 amp with MCB 20 Amp 'C' type all specified and complete. (For geyser)

S&F in repair for concealed sub main wiring with PVC insulated, unsheathed 2 single core cable 1100 volts grade with copper conductor of size 6.0 sq mm (Nominal area) multi stranded drawn into conduit (Existing / new) with and including 6.0 sqmm green stranded copper conductor as contineous earthwire with lugs complete all as specified and as directed.

S&F TPN DB-DPX 125 MCCB DBs 4 way single door with provision for DPX 125 MCCB and as incomer and SP/TP MCBs as out going no of modules DPX 125+12, concealed Complete all as specified and as directed. Make:- ABB / Havells / HPL / Standard.

Supply and fix MCCB having breaking capacity of of 16 KA 415V, 4 pole having rating capacity of 100 Amp 100% ICU complete all as specified and as directed.

S&F sheet metal enclosure double door concealed suitable for distribution boards when MCBs to be used having 100 Amp rated bus bar SPN DB 8 ways 240 V complete all as specified and as directed .

Supply and laying or fixing or passing through HDPE pipe, 1100 volts grade heavy duty cable with XLPE insulated stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel or strip and overall PVC sheathed, 16 sq mm 4 core ISI Marked as per IS 7098(Part 1) including connecting on LT OH line / LT panel /DB with suitable lugs, glands, binding wire etc complete all as specified and directed.

Supply and Fixing Exhaust fans AC single phase 230/240V of size 300 mm sweep, 1400 RPM with louvre complete including with all arrangement of making holes on wall, making good and finishing of disturbed surfaces matching with the existing surfaces, necessary fixing arrangement such as fastener bolts, nuts, washers etc, of appropriate size all as specified and as directed

S&F BLDC Ceiling fan complete with three aluminium blades down rod, snackel clamp, reel insulator, fan canopy split pin and accessories 230 V, 1200mm sweep with service value not less than 7.8, power consumption not more than 28 watt and minimum air delivery of 220 CMM, BEE 5 star rated, two core PVC insulated copper wire white sheathed of size 0.5 sqmm from fan connector to ceiling rose complete all as specified and directed. NOTE:-(I) Writing MES no in 20mm letter size with black paint etc is deemed to be included in quoted rate. (ii) Old fan deposit in store yard.

Material and labour for Double wall corrugated HDPE pipe, ISI marked of outer dia 50mm, inner dia 38mm with smooth internal and profiled external surface, non-pressure type, laid in trenches/floors/duct or fixed on walls /pole including all connections, accessories like socket, couplers, bends, etc for protection of LT cable XLPE grade 1100 volts complete all as specified and directed by Engineer-in-Charge.

M/S RAJ KUMAR SINGH (BID ID -3369316)

M/S JAI BALAJI TRADERS (BID ID -3378808)

SHRI HARI CONSTRUCTION (BID ID -3364502)